Used Agiecharmilles Robofrom 20 for sale (27,984)

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Almost new municipal winter service truck Mercedes-Benz Arocs 2235 4x4 all-wheel tipper with 22 t gross vehicle weight, Meiller three-way tipper and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera, and much more. German one-owner vehicle with only 20,553 km (odometer), new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload with 18,000 kg gross weight: 7,672 kg Payload with 22,000 kg gross weight (winter service): 11,672 kg Weight variant 20.5 t (9.0/13.0) Permitted gross weight during winter service: 22,000 kg Winter service front axle load increased: 10.5 t Front axle: 9.0 t straight, Rear axle: bevel gear 300, planetary design, 13.4 t Front leaf spring: 10.5 t, 3-leaf; Rear leaf spring: 13.0 t Winter service hydraulics by Meiller for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-driver’s cab ClassicSpace with rear window Additional heat insulation Engine: OM936, R6, 7.7 l, 260 kW (354 HP), 1400 Nm, Euro 6 E Drive: 4x4 Differential lock front and rear axle Axle ratio i = 4.143 Meiller 3-way tipper, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side walls: 600 mm high Removable aluminium side wall extensions +400 mm Rodpfx Aoxlwnaomgeu Lashing pockets in tipper body floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04 selectable PTO via engine power take-off Automatic climate control Auxiliary heater – hot water additional heating Tow hitch Maul Ringfeder D40 with air brake connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross train weight: 40,000 kg Front and rear leaf suspension Front and rear axle stabilisers Electric braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290 litre tank LED daytime running lights LED rear lights Fog lights 2 rotating beacons to the rear, above the cab roof Rear work lights Exhaust raised behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver’s air-suspended seat Central locking with remote control Last Mercedes-Benz service performed in 10/2025 German one-owner vehicle Meticulously maintained and as-new condition Price NET plus 19% VAT. Attractive financing options available upon request. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2577

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Like-new municipal winter service truck: Mercedes-Benz Arocs 2235 4x4 all-wheel drive tipper, 22 t gross vehicle weight, equipped with Meiller three-way tipper body and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera and much more. German vehicle, single owner, only 20,553 km, new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload at 18,000 kg GVW: 7,672 kg Payload at 22,000 kg GVW (winter service): 11,672 kg Weight variant: 20.5 t (9.0/13.0) Permissible gross vehicle weight for winter service: 22,000 kg Increased front axle load for winter service: 10.5 t Front axle: 9.0 t straight; rear axle: bevel gear 300, planetary gears, 13.4 t Front spring: 10.5 t, 3-leaf; rear spring: 13.0 t Meiller winter service hydraulics for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-cab ClassicSpace with rear window Additional thermal insulation Engine: OM936, inline-6, 7.7 l, 260 kW (354 hp), 1400 Nm, Euro 6 E Drive: 4x4 Differential locks front and rear axles Axle ratio: i = 4.143 Meiller three-way tipper body, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side boards: 600 mm high Additional removable aluminium side board extensions +400 mm Lashing eyes in tipper bed floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04, engageable PTO via engine driven output Automatic climate control Auxiliary hot water heater Towing hitch: Maul Ringfeder D40 with air connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross combination weight: 40,000 kg Front and rear axles with leaf springs Front and rear stabilizer Electronic braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor Rodpfoxlwngsx Amgeu 290-litre fuel tank LED daytime running lights LED rear lights Fog lamps 2 rotating beacons on the rear above cab roof Rear work lights Exhaust routed vertically behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver's air-suspension seat Comfort central locking system with remote control Last Mercedes-Benz service performed 10/2025 German vehicle, one owner Top-maintained, like-new condition Net price plus 19% VAT. Attractive financing options available. All information subject to change. Errors and intermediate sale reserved. Internal vehicle number: 2577.

Condition: new, Year of construction: 2026, Continuous/standard drilling capacity (mm): 20/23 (in E335/ST60) Thread cutting capacity (pitch-dependent): M12 Spindle: MT II Spindle speed (stepless): 40–4000 rpm Drilling depth (mm): 100 Throat depth (mm): 240 Column diameter (mm): 82 Usable working area (W x L) (mm): 340 x 280 T-slot size (arm), spacing (mm), slot width (mm): Quantity 2, 125, 13/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quickly adjustable stop ring Feed (mm/rev): Manual Table height adjustment: Rack and pinion Three-phase motor 400V with frequency inverter (kW): 1.5 Distance spindle/working surface (mm): 160–880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard accessories: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically inclined front - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Emergency stop button - Thermal overload protection - Spindle stop - Drill guard with electrical safety interlock - Connection cable with CEE plug Optional accessories: Drilling package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Keyless drill chuck 3–16 mm (accuracy 0.17 mm), Rsdpfx Amoir Ir Tjgeu - Morse taper arbor MT 2 B18 and reducing sleeve MT 2 to MT 1 €485.00 3-year warranty for single-shift operation Free delivery within Germany NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE COMPLETE FLOTT RANGE! PLEASE REQUEST A QUOTE!

Condition: excellent (used), Year of construction: 2011, volume flow: 3.55 m³/h, operating pressure: 10 bar, pressure: 13 bar, ALMIG VARIABLE 20 screw compressor Variable speed (inverter-controlled) 20 kW motor Capacity: 3.55 m3/min Pressure: 13 bar Rodpfx Ajy Uwftemgou Year of manufacture: 2011

Condition: used, mileage: 289,050 km, power: 125 kW (169.95 HP), first registration: 01/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,046 mm, total width: 2,020 mm, total height: 2,293 mm, loading space length: 3,300 mm, loading space width: 1,960 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Internal Vehicle No.: 7412 ----Why autonext GmbH? One of the largest commercial vehicle showrooms in Germany. Always over 400 vehicles available immediately. Largest selection - best price. More than 1000 satisfied customers per year - top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Next service in 482 days Like-new all-weather tires in the rear Automatic transmission Body: Refrigerated box ThermoKing refrigeration unit "V500 MAX" Refrigerant: R-452A Standby cooling + engine cooling Optionally, we offer a refrigeration maintenance service from the manufacturer for only €899. Hydr. tailgate lift "Bär" Rearview camera Navigation system Active brake assist Controlled air conditioning (Tempmatik) Auxiliary heater Comfort suspension seat Rsdpey Tgkvjfx Amgju Loading area length: 3.30m Loading area height: 2.0m Loading area width: 1.96m ---- Special equipment: * Multimedia system MBUX (touchscreen 7") * Bluetooth hands-free system * Steering wheel with multifunction buttons * 1 DIN slot in front under the dashboard, passenger side * 2nd battery (additional battery) in the interior * Airbag, passenger side * Acoustic package * Exhaust pipe in front of the rear axle, left * Exterior mirrors without integrated turn signal * Battery disconnect switch 1-pole * Turn signals in front, on the side * DAB tuner (digital radio reception) * Driving assistance system: active brake assist * Suspension: Stabilization level II * Generator 250 A * Inductive charging cradle for smartphone (wireless charging) * Folding cover for storage compartment * Connector strip for electrical connections (driver's seat) * Controlled air conditioning (Tempmatik) * Fuel filter with water separator * Front engine drive with carrier for additional refrigerant compressor * Navigation system for multimedia system MBUX * Smoker's package * Spare wheel holder under the end of the frame incl. jack * Windshield wipers with rain sensor * Mud flaps in front * Safety belt system with warning system (passenger side) * Seats in the cab: Double seat for passenger * Seats in the cab: Comfort suspension seat, driver's side * Seats in the cab: Driver's seat, low * Separation relay for additional battery * USB port in the center under the dashboard (charging function only) * Interior trim, rear wall * Front axle reinforced * Auxiliary heater (hot water) Standard equipment: Storage compartment above the windshield, Towing eye rear, Adaptive brake light, Airbag driver side, Hill-start assist, Anti-lock Braking System (ABS), Anti-slip regulation (ASR), Drive type: Rear wheel drive, Indicator for windshield washer fluid level, Exterior mirrors, electrically adjustable and heated, both, Outside temperature indicator, Roof lining in the cab, Automatic activation of driving lights, Electronic brakeforce distribution (EBV), Electronic Stability Program (ESP), Driving assistance system: Side wind assist, Power windows electric 2-fold, Noise reduction measure outside, Transmission automatic GTronic - (9-speed), Body/structure: Standard platform, Keyless start, Communication module (LTE) for digital services, Fuel tank: Main tank 71 L, Steering wheel (steering column mechanically adjustable), Headlight range control, Truck registration, Marking lights on the side, Mercedes-Benz emergency call system, Engine 2.0 L - 125 kW CDI CAT, Particle filter, Wheelbase

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. Rodpfx Aetp Twfomgsu We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 20°-750-550 IR1300 RA1477 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 640 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 1300 mm Conveying angle: 20° degrees Support feet and Lateral guides on both sides optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Rodpfxek Abcgo Amgou Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2008, condition: good (used), Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Mechanic Maschinenbau Hahn, electric heavy-duty railcar with lifting cylinder -Type: Railcar MTA, load capacity 20000 kg -Roller spacing (track gauge): 2150 mm -Cylinder spacing: 2245 mm Rjdpfxjlbdlzj Amgeu -Lift height: 110 mm -Drive units: 2x Demag geared motors type ZBF80A 4 B020 gearbox type ADE40TD -Individual components: see photos -Overall dimensions: 2860/2440/H610 mm -Empty weight: 2200 kg

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine has not been used for several years so we want to sell it. It is in very good condition. Rodpfxswimu Ho Amgju

Condition: like new (used), functionality: fully functional, Year of construction: 2025, 20 FEET HIGH CUBE (HC), AS NEW, ONLY ONE SEA VOYAGE OLD ✍️ Dimensions External: 6,058 x 2,438 x 2,896 mm (LxWxH) Internal: 5,898 x 2,352 x 2,690 mm (LxWxH) Door opening: 2,338 x 2,585 mm (WxH) ✏️ Color: RAL7016 ⚙️ Features: Wooden floor Lock box (security feature for valuable goods) Forklift pockets Wind and watertight 5-year valid CSC certificate (comparable to a TÜV) ⤴️ Additional services on request: Custom modifications, e.g., conversions, repainting, and much more possible Redpfxoy Dfzus Amgju ⚡️ Fast delivery available, including unloading on request Please provide your postal code for a non-binding quote _____ ✅ We would be pleased to provide you with a customized offer.

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 650 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 Rodpfxewhzmnj Amgeu - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW Rjdpfx Amstqmnnsgju max. Torque 9,4 Nm C-Axis C1: 360 ° inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors Rjdpfx Amowhzmzjgju - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: used, functionality: fully functional, overall weight: 2,100 kg, total length: 6,000 mm, total height: 2,400 mm, USED storage container/sea container 6m long (20ft) Rsdpfx Ajrgprwsmgsu OPERATIONAL, wind and watertight With valid CSC sticker Wooden floor We offer you... Delivery including unloading available for an additional charge A customized offer Customized paint finish Conversion of the container exactly according to your wishes All offered containers are in stock Other: • Dimensions and weights are available upon request PLEASE CONTACT US

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Viewfinder via handwheel Rodpormudgsfx Amgou Assortment of tools is included in the price

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. Rodpfxsy T Hkpo Amgou The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Condition: used Machine is complete Inspection possible while powered on

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total width: 580 mm, total length: 840 mm, total height: 1,380 mm, empty load weight: 250 kg, power: 2.2 kW (2.99 HP), height adjustment type: mechanical, New machine with a 24-month warranty. Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant power transmission + Equipped with an ingredient hopper and a safety guard made of stainless steel + The machine shuts down immediately when the guard is lifted + Integrated dust/splash guard cover + Machine rests on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift with lever + Bowl support arms made of stainless steel + Enclosed planetary gearbox made of stainless steel + Can also be used with an optional 20-liter attachment Rsdpfxohydl Dj Amgsu + Fast availability of spare parts within 1-2 working days STANDARD accessories included in the price: - 1x 40-liter stainless steel bowl - 1x mixing beater for 40-liter bowl - 1x flat beater for 40-liter bowl - 1x dough hook for 40-liter bowl OPTIONAL accessories, available at an extra cost, prices upon request: - Additional 40-liter stainless steel bowls - Additional tools (mixing beater, flat beater, dough hook) - Bowl trolley for 40-liter bowl - 20-liter attachment (1x 20-liter stainless steel bowl + 3 tools for 20-liter bowl) Technical data: - Motor power: 2.2 kW - RPM at 50Hz: 125 - 424 (level 1 - 10) - Protection: 16A-CEE plug - Connection values: 400V - 3Ph - 50Hz - Dimensions: 580 x 840 x 1380 mm (W x D x H) - Max. 1650 mm height when the hood is open - Net weight: 250 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, total width: 520 mm, total length: 750 mm, total height: 930 mm, empty load weight: 100 kg, power: 1.1 kW (1.50 HP), height adjustment type: mechanical, New machine with a 24-month warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixing machine with digital control + 10 speeds with constant power transmission + Equipped with an ingredient hopper and a stainless steel safety guard + The machine shuts down immediately when the guard is raised + Features an integrated dust/splash guard cover + The machine stands on 4 vibration-absorbing adjustable feet Redshydlyspfx Amgsu + No floor anchoring required + Bowl lift with lever + Stainless steel bowl support arms + Closed planetary gearbox made of stainless steel + Can also be used with an optional 10-liter attachment + Fast spare parts delivery within 1-2 working days STANDARD accessories, included in the price: - 1x 20-liter stainless steel bowl - 1x Mixing beater for 20-liter bowl - 1x Flat beater for 20-liter bowl - 1x Dough hook for 20-liter bowl OPTIONAL accessories, available at an extra charge, prices on request: - Additional 20-liter stainless steel bowls - Additional tools (mixing beater, flat beater, dough hook) - 10-liter attachment (1x 10-liter stainless steel bowl + 3 tools for 10-liter bowl) Technical data: - Motor power: 1.1 kW - RPM at 50Hz: 148 - 492 (level 1 - 10) - Connection values: 230V - 1Ph - 50Hz - Dimensions: 520 x 750 x 930 mm (W x D x H) - Max. 1190 mm height when the hood is open - Net weight: 100 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, total width: 610 mm, total length: 756 mm, total height: 918 mm, empty load weight: 90 kg, power: 1.1 kW (1.50 HP), New machine with a 24-month warranty. Stainless steel model. Advantages: + Excellent price-performance ratio + Powerful planetary mixing machine with digital control + Housing made entirely of stainless steel + Meets the strictest hygiene standards + 10 speeds with constant power transmission + Includes ingredient hopper and stainless steel safety guard + The machine shuts down immediately when the guard is lifted + Machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift with lever + Planetary gearbox made of stainless steel Redpfx Ajivdw Nemgsu + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1x 20-liter stainless steel bowl - 1x mixing beater for 20-liter bowl - 1x flat beater for 20-liter bowl - 1x dough hook for 20-liter bowl OPTIONAL accessories, available at an extra charge, prices on request: - Additional 20-liter stainless steel bowls - Additional tools (mixing beater, flat beater, dough hook) - 10-liter kit (1x 10-liter stainless steel bowl + 3 tools for 10-liter bowl) Technical data: - Motor power: 1.1 kW - RPM at 50Hz: 181 - 508 (level 1 - 10) - Connection values: 230V - 1Ph - 50Hz - Dimensions: 610 x 756 x 918 mm (W x D x H) - Max. 1140 mm height when hood is open - Net weight: 90 kg

Condition: defective spare-parts repository (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 11.0591/4, empty load weight: 1,600 kg, load capacity: 6,000 kg, table width: 2,000 mm, input voltage: 400 V, type of input current: three-phase, table length: 3,000 mm, TEVAG 20/30/6 Truck Loading Bridge – Defective / Uninspected Selling a used hydraulic truck loading bridge, TEVAG type 20/30/6. The loading bridge is explicitly sold as defective or uninspected. Sale is exclusively as a DIY project, for spare parts, or for repair. The system was taken out of service for safety reasons. No guarantee on function or operational safety. Technical Data Manufacturer: TEVAG Type: 20/30/6 Machine Type: hydraulic truck loading bridge / loading ramp Load capacity: approx. 6 t Platform width: approx. 2,000 mm Platform length: approx. 3,000 mm Hydraulic lifting mechanism High-voltage connection Suitable for ramp and loading operations Condition Used Explicitly sold as defective Uninspected condition Ideal as a source of spare parts or for repair No warranty No returns Inspection is highly recommended Dismantling and transport by the buyer Note Year of manufacture, exact design and accessories as per the nameplate or photos. Redpfx Asy Urc Tomgsu Sale is made with the exclusion of any liability for defects.

Condition: ready for operation (used), Year of construction: 2006, travel distance Z-axis: 200 mm, number of axes: 3, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER 20 CNC Wood Machining Centre was manufactured in 2006. It features a working area of approximately 3060 × 1260 mm and a powerful 7–9 kW HSD electrospindle with speeds up to 24,000 RPM. The machine is equipped with an 8-position rear tool changer and offers various table types for versatility. If you are looking to get high-quality wood machining capabilities, consider the BIESSE ROVER 20 machine we have for sale. Contact us for further details. • Working area: approx. 3060 × 1260 mm (10’ × 4’); Z travel around 150–200 mm • Main spindle: 7–9 kW HSD electrospindle; up to 18,000–24,000 RPM; ISO30 or HSK tool holder (depends on package) • Tool changer: typically 8-position rear; some units with 10 or 12 positions Rsdpfxjy Tycxo Amgsu • Drilling head: BH17/BH21 style with vertical and horizontal drill spindles; grooving saw unit (optional) • Table type: pod & rail table or flat vacuum table; ATS vacuum system • Controller: NC1000 / XP600 control; running BiesseWorks / Biesse Rover control software • Electrical: 400V 3-phase; 50/60 Hz; around 15–25 kW connected load

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Rodpey A D Ecjfx Amgou Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: ready for operation (used), Year of construction: 2017, product length (max.): 5,015 mm, Edge and profile sandingr manufactured in 2017. This HEESEMANN UKP 20 features a total conveyor length of 5015 mm and a feed speed range of 5-25 m/min. It includes two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking to get high-quality sanding capabilities, consider the HEESEMANN UKP 20 machine we have for sale. Contact us for further details. Workpiece conveyor system • Total length: 5015 mm • Drive: 1.5 kW three-phase motor, double chain transport • Feed speed: 5–25 m/min, frequency-controlled • Working height: 880 mm (constant) • Integrated control cabinets • Adjustable stop rail with digital display and counter rail with central width adjustment • 4 side guide rollers between sanding units for safe strip transportControl • Industrial PC, 10.4" LCD-TFT touchscreen • Production and downtime display • Program memory for 100 programsSanding units • 2 x belt sanding units “M4” (Positions 1 and 2) • Application: Straight edge sanding • Belt: 2300 x 80 mm • Speed: 0.7–12 m/s, stepless via electronic frequency control • Motor power: 3.0 kW • Electronic sanding pressure control from terminal • 2 x oscillation units for “M4” (Positions 1 and 2) • Purpose: Full utilization of sanding belt • 2 x belt sanding units “K4” (Positions 3 and 4) • Application: Small profile sections; chamfering • Swivel range: +90° upward / -45° downward Redpfxsy Twhxs Amgeu • Belt break switch • Tool holder with quick-change mechanism • Intermittent belt feed mechanism • Belt: 2000 x 50 mm • Speed: 0.5–8 m/s, stepless via electronic frequency control • Motor power: 1.1 kW • Electronic sanding pressure control from terminalAutomation/line control • 4 electronic line controls for fully automatic timing of tool contact/lift-off based on set feed rate, sanding pressure, and unit angle

Condition: excellent (used), Year of construction: 1998, operating hours: 34,434 h, - Iemca MINI BOSS 325 CNC/32 loader Rsdoy Uffzjpfx Amgju - CONVEYORS IND. ASS. chip conveyor, Model: TMPF 1088 - Kraft&Bauer fire extinguishing system (year 2021) The machine has always operated using only neat oil, never with emulsified water. Operating hours: 34,434

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Rjdpfeylprfsx Amgeu Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Weight: 40 tons