Used Amkus Hydraulic Rescue Set for sale (23,902)

Condition: new, machine/vehicle number: 85163, machine: new piston hydraulic membrane pump type: Abel HMD-G-50-500 Pjdod Ey I Ejpfx Amxorb Flow rate: max. 50 m³/h Discharge pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, - with blower : The pump is controlled via frequencly converter.:

Condition: new, weight max. 5000 kg workpiece diameter 250 - 2500 mm total power requirement 0,75 kW table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 800 kg range L-W-H 2200 x 2500 x 800 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating Pedpfon N D Iwex Amxorb - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge Predpoi Db Erofx Amxeb - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools Pjdpfozkl Husx Amxsrb

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Prsdpfxeznngxs Amxjb Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses Prodpjxaa Ixofx Amxeb - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. Psdpexaa I Sjfx Amxerb range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1,2 ° control CYBELEC CybTouch work height max. 800 mm oil volume 150 ltr. total power requirement 11,0 kW weight 5500 kg range L-W-H 4.000 x 2.410 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: Prjdpfx Ajxaa Rgomxjb - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge Psdpfoxabd Ujx Amxjrb * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: new, sheet width 3100 mm plate thickness 13,0 mm thickness at "Niro-steel" 8,0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0,05 - 2,0 ° throat 350 mm table height 900 mm total power requirement 22,0 kW weight of the machine ca. 13.300 kg range L-W-H 5.110 x 2.570 x 2.400 mm ----- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch Prjdpfjxabikox Amxob - CE mark / declaration of conformity - User manual: machine and control in German

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4100 x 2200 x 2190 mm ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guiding guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system Podjxaag Ujpfx Amxorb - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, pressure 100 t Pedpfxexabrfo Amxerb punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws Prodpfx Amoxabwuoxsb * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions Prodpfxsw U U Svj Amxob

Condition: new, Year of construction: 2026, machine/vehicle number: 20260228006, fuel type: diesel, motor manufacturer: Perkins 2206C-E13TAG2, General information Field of application: Construction Weights Empty weight: 4.550 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 416 x 160 x 215 cm CE mark: yes Other information Fuel consumption: 58 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 580 l Production country: CN Additional information Predpjyy Uafofx Amxeb Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: as good as new (ex-display), functionality: unexamined, Ferwood Code: RS0003033 - Manufacturer Code: 0058060-1110 - Condition: Like new (display item) - Functionality: Untested - If interested we offer a revision service, contact us. Prjdpfxsv Azafs Amxob

Condition: new, Year of construction: 2026, machine/vehicle number: 20260102025, fuel type: diesel, motor manufacturer: Cummins 6BTA5.9-G2, General information Field of application: Construction Weights Empty weight: 1.510 kg Functional Generator capacity: 138 kVA Dimensions of cargo space: 304 x 113 x 130 cm CE mark: yes Other information Fuel consumption: 20 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 185 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Psdpfx Amowzrlnoxerb

Condition: new, Year of construction: 2024, machine/vehicle number: CAT00C15LGB904528, fuel type: diesel, motor manufacturer: Caterpillar C1.5, General information Field of application: Construction Weights Empty weight: 532 kg Functional Generator capacity: 13 kVA Dimensions of cargo space: 176 x 94 x 123 cm CE mark: yes Other information Fuel consumption: 3.0 Liter / Hour at 75% Load Generator: Caterpillar M1413L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 55 l Additional information Please contact Team DPX for more information = Additional options and accessories = Prsdpjwnwdvefx Amxeb - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 20240416011, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG2, General information Field of application: Construction Weights Empty weight: 1.825 kg Functional Predpfx Aew Dag Esmxeb Generator capacity: 165 kVA Dimensions of cargo space: 305 x 113 x 173 cm CE mark: yes Other information Fuel consumption: 24,7 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 320 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Only 5 hrs. Traded-in from customer who needs more power. Warranty is still applicable. Used Generator Set.

Condition: new, Year of construction: 2025, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA Dimensions of cargo space: 225 x 135 x 225 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = Pedpsw A E U Ssfx Amxsrb - Control Panel - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: CAT00C71TECW08977, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 2.238 kg Functional Generator capacity: 220 kVA Dimensions of cargo space: 352 x 133 x 181 cm CE mark: yes Other information Fuel consumption: 34.6 Liter/Hour at 75% Load Generator: Caterpillar M2807280 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 418 l Production country: UK Prodpfx Ajw Thn Usmxsb Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2024, machine/vehicle number: CAT3512BJLY892034, fuel type: diesel, power: 1,280 kW (1,740.31 HP), motor manufacturer: Caterpillar 3512B, General information Field of application: Construction Weights Empty weight: 14.000 kg Functional Generator capacity: 1.600 kVA Dimensions of cargo space: 572 x 208 x 222 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fuel consumption: 238.6 Liter / Hour at 75% Load Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Predpfx Amjwvdvuoxjb Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel = Remarks = This brand new machine is part of Caterpillar's rebuild program Ask us for more information. Available in 50Hz - 400V Prime rating 1.500 kVA, Standby rating 1.600 Controls: EMCP4.2 / ADEM 3

Condition: excellent (used), fuel type: diesel, color: white, Year of construction: 2016, Year of manufacture: 2016 Model year: 2016 Pedpfeuu Dhrsx Amxorb Intended use: Construction Generator output: 1,320 kVA CE marking: yes Technical condition: very good Visual condition: very good Price: On request

Condition: new, functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 4,160 mm, sheet thickness (max.): 13 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 30 kW (40.79 HP), control voltage: 480 V, overall weight: 16,850 kg, total length: 4,930 mm, total width: 3,160 mm, total height: 2,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Comparable to Durma, Baykal, Ermaksan, etc. Swing beam guillotine shearing machine with fixed cutting angle Maximum cutting length: 4160 mm Pjdjxyxxcspfx Amxsrb Maximum sheet thickness: 13 mm (at 450 N/mm²) Cutting angle: 2 degrees Number of hold-downs: 19 Motor power: 30 kW Cutting speed: 8 strokes/min Oil tank: 400 l Machine length: 4930 mm Machine width (without support arms): 2345 mm Total width: 3160 mm Machine height: 2100 mm Machine weight: 16,850 kg Gap depth: 150 mm Standard equipment: CE safety equipment / conformity Manual central blade gap adjustment / handwheel Cutting length adjustment via control panel Support balls in the table Motorized, programmable backgauge 1000 mm via ball screw drive Folding finger guard over 1000 mm 1 piece 1000 mm stop arm with scale, T-slot, flip stop, support balls 2 pieces 1000 mm support arms with integrated balls Cutting line illumination via shadow projection, LED lighting Adjustable shadow line High-quality top blade with 2 cutting edges High-quality bottom blade with 4 cutting edges Features: CNC control Cybelec Cybtouch 8 Pneumatic sheet support device Front finger guard with light barrier CNC-controlled blade gap adjustment Service and spare parts supply provided by Viering Werkzeuge Maschinen GmbH. Other Dener sheet metal working machines available upon request.

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional Options and Accessories = Other - Remote-controlled central locking - Lift axle - Air suspension Podpfxszc Rhcs Amxjrb - Fifth wheel coupling - Spotlights Other - Sun visor = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm. = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.