Used Amtec Semi-Automatic L-Bar Shrink Wrapper for sale (79,014)

Condition: used, mileage: 736,739 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 25,500 mm, total height: 37,000 mm, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (at Tel. ...). Mercedes-Benz Antos 2543 L 6x2 beverage box body: Lsdpfxey T Uuco Ammeac - A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle - cranked design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A4Y trailing axle 7.5 t, steered, liftable, relieveable, A5C axle ratio i = 2.733 - B1B electronic braking system with ABS and ASR, B1E electronic compressed air supply unit, high output, B1F heating for electronic compressed air supply unit, B2A disc brakes on front and rear axles, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, B5L trailer brake connection rear, Duo-Matic + standard, C0Z frame overhang 1950 mm, C2P wheelbase 4600 mm, C5I mounting parts for flatbed body, C5P bolted frame, C6C steering, single circuit, C6J steering assist pump non-regulated, C6U additional stabilizer for rear/trailing axle, C7F front underrun protection (ECE), aluminum, C7J battery box, batteries side-by-side, C8F fenders for chassis transfer, C8I splash protection (EC), front, C9Y rear underrun protection deleted (ECE), D0L smoker’s package, D0S compressed air connection in cab, D1C driver comfort suspension seat, D1N passenger functional seat, D2N seat backrest release, driver’s seat, D3I lower bunk, D3Q seat cover velour, D4Y driver's side sunblind, D6F air-conditioning, D6I residual heat utilization, D6M hot water auxiliary heater cab, D7G lockable storage compartment, driver/passenger side, D7P low storage tray on engine tunnel, D8A roof hatch/ventilation flap, E0D Hella battery sensor, E1C batteries 2x12V/220Ah low-maintenance, E1M alternator 28V/150A, E3L socket 24V/15A passenger footwell, E4B Fleet Management System (FMS) interface, E4C additional functions for bodybuilders, E4W starting aid, speed limit 30 km/h, E5A switch no. 1 for external body electrics, E6A 24V 15-pin trailer socket, E7F remote cable control for air suspension, E9H pre-installation control for tail lift, F0F side module, N3 vehicle, F0X mirror cover for road vehicle, F1O M cab ClassicSpace, 2.30m, 320mm tunnel, F3B cab mounting, comfort, steel sprung, F3W cab tilting device mechanical-hydraulic, F4H cab rear wall without window, F4X external storage flap left, F5C airflow body without base trim, lockable, F5L external sun visor, transparent, F5Y A-pillar panelling, F6C tinted windscreen, F6I heated front mirror, F7B bumper steel corners, F7C bumper center with towing eyes, F7X cab entrance left/right fixed, F8B 2 remote control keys, F8E central locking system, F8F comfort locking system, G0U economy drive program, G2B transmission G 211-12/14.93-1.0, G5A single disc clutch, G5G Mercedes PowerShift 3, I2G tubeless tires 315/80 R 22.5 front/leading/trailing axle, I2H tubeless tires 315/80 R 22.5 rear axle, I4C axle configuration 6x2 ENA, I6I production plant Wörth, I6X air suspension rear axle, J1C 12.7 cm cluster instrument with video function, J1R speedometer digital, EC, rpm, ADR, J1S tachograph manufacturer VDO, J2D radio/navigation system Bluetooth, comfort, J2K speakers 2-way system, J9B telematics pre-installation, J9C Fleetboard pre-installation for J3D, J9D toll pre-installation, J9J reverse camera pre-installation, K0T main tank left, K1E tank 390L left, 650 x 565 ...

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. Lasdpfx Asfcdnljmmec The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Year of construction: 2009, condition: used, GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009 The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure. With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work. Key Features • Model: GEA Niro Soavi NS2002H • Year of manufacture: 2009 • Capacity: up to 30 L/h (product and pressure dependent) • Working pressure: up to 60 MPa (600 bar) • Laboratory / bench‑scale design – compact and easy to install in R&D labs • Stainless steel product contact parts for hygiene and corrosion resistance • Adjustable homogenizing pressure for precise process control and repeatability • Designed for continuous operation with stable, reliable performance Typical Applications • Dairy: milk, cream, flavoured dairy beverages Lsdsy Nmy Aopfx Ammsac • Food & beverage: sauces, dressings, juices, nutritional drinks • Cosmetics & personal care: creams, lotions, gels, serums • Pharma & biotech: emulsions, suspensions, nutraceuticals, pilot batches Benefits • Fine and uniform particle size for improved product stability • Enhanced texture, mouthfeel and visual appearance • Low product hold‑up volume – ideal for trials and high‑value products • Easy operation and cleaning, suitable for frequent product changeovers Capacity: 30 L/H on 600 Bar Working Pressure: 600 bar Max No. Stages: 2 condition: Very Good condition Available: Immediately

Condition: new, Year of construction: 2024, warranty duration: 12 months, Semi-automatic rolling machine Rondo SWL 640 - Year of manufacture: 2024 - Unused - Power supply: 400 V/3 phases - Belt length: 1,400 mm - Belt width: 640 mm - Machine body painted - 12-month warranty Laedpfx Aey Ui D Usmmsc - Collection from warehouse/shipping option available - Price on request

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + very good price-performance ratio + already included as standard: mobile machine, ideal for quick dough processing + cutting blade made of stainless steel + coated cutting head + uniform division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + easy and quick adjustment of the processing chamber height + side holder for the processing plate, readily accessible STANDARD equipment: + 3 processing plates included General technical data: Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on dough/product) Lodpjivdnnjfx Ammjac Dough input: 1,820 - 5,600 grams (depending on dough/product) Optionally available: - additional processing plates Surcharge: €115.00 net / piece

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + Very good price-performance ratio + Already included as standard: mobile machine, ideal for quick dough rounding + Dividing blade made of stainless steel + Coated dividing head + Uniform division of the dough + Excellent rounding of the dough pieces + Ergonomic blade cleaning position (head can be swiveled 90 degrees forward) + Easy and quick adjustment of the rounding chamber height + Lateral holder for rounding plates, readily accessible STANDARD equipment: + 3 rounding plates included General technical data: Power: 0.75 kW Connection values: 400V - 3-phase - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Ledpfx Ajhydmhommeac Net weight: 340 kg Size 3-30: Number of pieces: 30 dough pieces Piece weight: 25 - 80 grams (depending on dough/product) Dough input: 750 - 2,400 grams (depending on dough/product) Optionally available: - Additional rounding plates Surcharge: €115.00 net/piece

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + very good price-performance ratio + already standard: mobile machine, ideal for quick floor cleaning + stainless steel dividing knife + coated knife head + even division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + easy and quick adjustment of the working height + side holder for the working plate, readily accessible STANDARD equipment: + 3 working plates included General technical data: Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Fuse: 16A CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Ledpfx Aoivdngemmjac Size 4-30: Number of pieces: 30 dough pieces Piece weight: 40 - 120 grams (dough/product dependent) Dough input: 1,200 - 3,600 grams (dough/product dependent) optionally available: - additional working plates Surcharge: €115.00 net / piece

Condition: used, Column-guided bandsaw, semi-automatic, METORA - KALTENBACH, type HMB 380 DS Laedpfx Ajdzqtgemmoc for 90° cuts only (Made in Austria) Machine no. 4580028, year of manufacture approx. 1993 Cutting range: round Ø 380 mm Square 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw blade speed: 25-108 m/min, infinitely variable Material feed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor drive power: 4 kW Power supply: 400 volts, 50 Hz - Fully hydraulic bandsaw in a two-column design - Hydraulic saw head lowering with infinitely variable cutting pressure adjustment - Lowering speed infinitely adjustable - Hydraulic clamping of the workpiece with hydraulic bundle clamping from above - Hydraulic unit integrated in the machine base - Material feed roller on the feed side with gear motor (not mounted on the machine frame) - Coolant system with coolant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating element for coolant and hydraulics - Length stop, TRENNJAGER type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop base length 6750 mm, stop travel 5650 mm, stop arm can be hydraulically folded up without roller conveyor Footprint of the base machine L x W x H: 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of the stop system: approx. 800 kg in good condition

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Ljdpfx Aepu R Nvsmmeac Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2026, PTC JTR-C Cold Water Trailer – similar to, but not a Dynajet, Oertzen, Falch, ROM, Rioned, Karo, etc. - Single-axle trailer with a hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, taillights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: JTR-C 60/200 | 60 l/min at 200 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/150 | 75 l/min at 150 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/210 | 75 l/min at 210 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 84/190 | 84 l/min at 190 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 102/150 | 102 l/min at 150 bar | Engine: Kohler KDW 2204 37.5 kW Engine type: TIER III (Kohler) or Stage V (Yanmar) Lodpfxsfdkbge Ammeac - Dimensions: 3,370 x 1,640 x 1,540 - Unladen weight: approx. 600 kg - High-pressure pump: HPP - HD hose reel: fixed and manual or hydraulic with a maximum of 100 m of 1/2" and 60 m of 3/4" hose (included) - Water supply hose reel: manual with 50 m of 3/4" hose - Water tank: 600 l - Options such as remote control, warning light, work light and accessories available upon request.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 60 h, power: 0.5 kW (0.68 HP), input voltage: 400 V, Equipment: CE marking, documentation/manual, Vitap Eclipse Semi- Automatic contour edge bander 2014 max working 60 hour Ljdpjy Rmyfofx Ammoac

Condition: good (used), Year of construction: 2008, functionality: fully functional, cam-controlled automatic lathe including bar magazine - Manufacturer: PMT (Traub India) - max. bar diameter: 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders - Weight approx. 650 kg - Dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - Bar loader IEMCA AS 325/62 (max. bar length 6,200 mm) Ljdpoy R Tqqofx Ammsac

Condition: good (used), Year of construction: 2015, functionality: fully functional, cam-controlled automatic lathe including bar magazine - Manufacturer: PMT (Traub India) - max. bar diameter: 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders - Weight approx. 650 kg - Dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - Bar loader IEMCA AS 325/62 (max. bar length 6,200 mm) Lodpfx Amsy R Tm Semjac

Condition: good (used), functionality: fully functional, cam-controlled automatic lathe including bar loader magazine - max. bar diameter 25 mm - tailstock - 2 vertical tool holders Lajdpfx Asy R Tg Ssmmsc - 2 horizontal tool holders - weight approx. 650 kg - dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - bar feeder IEMCA AS 325/62 (max. bar length 6,200 mm)

Condition: good (used), Year of construction: 1994, functionality: fully functional, cam-controlled automatic lathe including bar loader magazine - max. bar diameter 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders - weight approx. 650 kg - dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - bar feeder IEMCA AS 325/62 Lajdpfx Ajy R Tfbommec (max. bar length 6,200 mm)

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Laedpfxjfiulfo Ammjc Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages Ljdpjfiliwjfx Ammsac • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Adpak A700 Sleeve wrapper Laedpfev E Rrvex Ammec Adpak Easy700 shrink wrapper, sleeve wrapper machine, sealing bar 750mm width, max product 600mm x 400mm, ideal for trays, bottles, cans, food, drinks, toiletries and more, mobile, 3Ph

Year of construction: 2005, condition: used, machine/vehicle number: 15-230068, With digital display Laodpoy Sqkqofx Ammjc

Condition: used, mileage: 302,000 km, power: 230 kW (312.71 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, spoiler, tail-lift, traction control, trailer coupling, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Empty weight: 7.380 kg Carrying capacity: 4.610 kg GVW: 11.990 kg Tail lift: Bar, tail lift, 3000 kg Lajdpoy N Tkzsfx Ammoc Registration number: BB-106-V = Additional options and accessories = - Heavy duty engine brake - Rear air suspension - Reversing camera - Roof spoiler - Side door - Vehicle heater - Visor

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Laodpfxoy N R Ttj Ammsc

Condition: new, Year of construction: 2026, functionality: fully functional, ATTENTION!!! SPECIAL OFFER!!! LAST ONE LEFT!! Features: Semi-automatic operation Hydraulic control of arm movement (up – down), with smooth adjustment of descent speed Arm position memory function Hydraulically controlled vice jaws Hydraulic cutting clamp included Hydraulic band tensioning Band cleaning brush Cooling system Bimetal band saw CE Declaration of Conformity Lsdsy Tipnepfx Ammeac Technical data: Type: Semi-automatic column type Control: control panel at the front of the machine Maximum cutting diameter: 350 mm, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Bandsaw speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter 5 mm Min. material length in the vise 30 mm Distance from the base of the vise to the floor 780 mm Cutting band dimensions 4515 × 34 × 1.1 mm Total power 5.2 kW Belt speed 25/60/75 m/min Dimensions (L×W×H) 2400 × 1250 × 1550 mm Weight 1200 kg Manufacturer: Cormak

Condition: good (used), Year of construction: 1975, functionality: fully functional, 1 x Multi-spindle automatic lathe Traub A 15 with loading magazine Iemca AS 325/32 + Drilling and threading unit A well-maintained, complete machine in good technical condition. Lodpfsy R Nwysx Ammeac The machine can be inspected while powered on, or a video can be sent.

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Lajdpfxsww Hx Ij Ammsc

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Multilayer, year of manufacture 2004, CE compliant; Lasdpfox Nqi Isx Ammoc maximum bar diameter: 75mm maximum bar length: 3300mm