Used Atc Sk50Xmk3 for sale (731)

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted. Dwodpfx Akszfx A Eohea

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine with two sanding belts and a cutterhead for milling Djdpjwmxh Tefx Akhewa

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20080010, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 5.5 bar, VIBEMAC V700 Automatic Pocket Hemming Unit with Conveyor (2020) High-Speed Automatic Back Pocket Hemming Machine for Denim & Workwear Production VIBEMAC V700 is a high-performance automatic pocket hemming unit manufactured by VIBEMAC S.p.A. (Italy), specifically designed for automated back pocket hemming in denim, jeans, and workwear production. The machine is equipped with VIBEMAC's patented continuous conveyor feeding system, ensuring precise and repeatable hemming results while preventing fabric distortion, waving, or twisting, even when processing heavy denim or stretch fabrics. Finished pockets are automatically transferred to the integrated rotating collection disk via a pneumatic unloading system, allowing continuous high-volume production with minimal operator intervention. The machine was operating in professional garment production until factory shutdown and remains in fully functional condition. Technical Specifications • Manufacturer: VIBEMAC S.p.A. • Model: V700 • Year: 2020 • Serial Number: 20030010 • Country of Manufacture: Italy • Machine Type: Automatic Pocket Hemming Unit • Power Supply: 230 V, Single Phase • Pneumatic Requirement: 5.5 bar • Main Motor: Mitsubishi Electric XL-G554-20Y AC Servo Motor • Motor Power: 550 W • Stitch Type: 2-Needle Chainstitch • Stitch Length: Adjustable 0.9–5.0 mm via control panel • Production Capacity: Approximately 1,800–2,000 pockets per hour Key Features • Patented continuous conveyor feeding system • Designed specifically for automatic pocket hemming • Consistent and repeatable seam quality • Suitable for denim, stretch fabrics, and workwear materials • Pneumatic automatic unloading system • Rotating collection disk with capacity for approximately 600 finished pockets • Adjustable stitch length and sewing parameters • Electronic operator control panel • Easy-access maintenance design • Heavy-duty industrial construction • Suitable for continuous production environments Includes • VIBEMAC V700 automatic hemming unit • Integrated conveyor feeding and transport system • Automatic rotating pocket collection disk • Mitsubishi AC servo motor • Electronic control cabinet • Industrial machine stand • Pneumatic components • Thread stand and guides Applications • Back pocket hemming • Jeans manufacturing • Denim garment production • Workwear production • High-volume apparel manufacturing • Automated garment component production Condition • Fully functional • Previously used in professional garment manufacturing • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Sales Terms Dwedpfx Akezgwrhehea Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Djdoiq U Tqspfx Akhewa CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: like new (used), Dissolver VMA Getzmann Dispermat CN 40 Power: 2.2 kW Speed range: 0-5500 rpm Dissolver disc: 125 mm Dedpfxezddvpj Akhewa Basket mill Torusmill TML5-MS-S10 Double-walled mixing container, 5 liters, polished stainless steel 1.4571 Complete documentation available Like new, in top condition!!!

Condition: used, mileage: 621,500 km, power: 390 kW (530.25 HP), first registration: 08/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2025, color: red, gearing type: automatic, emission class: euro6, DAF XF 530 - Full air suspension - LED headlights - Leather interior Djdewhh Uxjpfx Akhewa - Lightbar - Alloy wheels - Refrigerator - Leather seats - Multifunction steering wheel - LED tail lights - Fuel tank: 1,275 liters - Roof hatch - Unladen weight: 8,581 kg - Front axle tyres: 385/55 R22.5 - Rear axle tyres: 315/70 R22.5 - TÜV (technical inspection) due: 09/2025 - Safety inspection (SP) due: 03/2026 Errors and prior sale excepted. Internal vehicle number: 10976 WhatsApp support available! If you have any questions about the vehicle or would like more information, feel free to contact us conveniently via WhatsApp. WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 P137 CUTTING LINE - refurbished => Package Price €26.000 1) Polar 137EMC-MON AT Guillotine 1995 -> single item price 18.000 € Dwodpfx Akev Ic H Dshsa 2) Transomat TR1ER145-3 Downstacker/Palletiser -> single item price 10,000 € 3) Jogger Polar RA-B-5 with Air Removal -> single item price 3.000 € 4) Paper Lift -> single item price 1.500 € Contact us for further info and for personal price negotiations

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Dedpfsy H U Upox Akhewa Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: good (used), loading space width: 3,000 mm, loading space height: 1,020 mm, total width: 3,000 mm, color: blue, Year of construction: 2009, Year of manufacture: 2009 Intended use: Agriculture Dwodjw A I Tkopfx Akhoa Maximum permissible weight: 291,000 kg Height of the loading platform: 102 cm Technical condition: good Optical condition: good Price: On request

Condition: used, mileage: 39,000 km, power: 75 kW (101.97 HP), first registration: 05/2021, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, soot filter, Mercedes Benz Vito EXTRA LONG / Maxi, single owner, with dual sliding doors Net price: €15,800 First registration: 05/2021 Mileage: 39,000 km TÜV (German Inspection): New upon request Registration: 3 seats Features: Cruise control, parking assistance, navigation system, Bluetooth, multifunction steering wheel, and other special equipment as listed below. ----Please, no emails, as due to time constraints, we can only handle them sporadically! Thank you for your understanding. For inquiries: Opening hours and further information: Inspection & purchase possible without appointment: No need to schedule a viewing! MON–THU: 9:00 – 16:00 FRI: 9:00 – 13:00 SAT: 9:00 – 12:00 Dwsdpfx Aswz Ukmokhoa Address: Tabakried 11 84076 Pfeffenhausen Please refrain from sending emails; we cannot process emails due to time constraints. Thank you for your understanding. For questions: Christian Hirsch Please try contacting multiple times, as we are often with clients. Special Equipment: Audio system Audio 30 (DAB, Bluetooth), electrically adjustable and heated exterior mirrors (both sides), DAB tuner (digital radio reception), automatic headlight activation, all-weather floor mats, vehicle without passenger seat (right) in cab, speed limiter set to 120 km/h, comfort lighting in passenger/cargo area, driver and front passenger thorax airbags, LED cargo compartment lighting, mechanically adjustable steering column, multifunction steering wheel with trip computer, parking package, rain sensor for windshield wipers, left sliding door for cargo/passenger area, seat upholstery: Rawson fabric, cab seats: driver's seat plus (with flat seat surface), special paint, standard trim in cargo/passenger area, heat-insulating glazing, two-way front speakers Additional equipment: 3-button remote for central locking, third brake light, adaptive brake light, passenger airbag, driver airbag, hill start assist, aspherical exterior mirrors (both), outside temperature display, roof rack mounting rails, BlueEfficiency package, TPO flooring in passenger area, brake assist, ABS + ASR braking system, 'Base' design and trim line, driving assistance system: Attention Assist (drowsiness detection), driving assistance system: Breakdown management, driving assistance system: Crosswind Assist, windscreen antenna, 185A alternator, 6-speed manual transmission, cup holders front and rear, seat belt tensioners, passenger grab handle, lockable glove box, body style/build: extra long, body style/build: panel van, LTE communication module for digital services, main fuel tank: 57L, full partition wall in cargo area, lashing/anchoring points, Mercedes-Benz emergency call system, model update, engine: 1.7L – 75 kW CDI CAT, rear fog lamp, wheelbase 3430 mm, low emission (Euro 6d-TEMP standard), right sliding door for cargo/passenger area, steel wheels 6.5x16, window pillar trims, hardboard half-height side trim in cargo/passenger area, lashing rails in load compartment – side wall at roof frame, fleece battery 92 Ah, Assyst maintenance interval indicator, GVWR 2.8 t. If you have any questions: Christian Hirsch or our friendly staff will be happy to assist you. Equipment details determined via VIN inquiry; there may be technical errors. All information provided online is for informational purposes only and is not binding.

Condition: used, mileage: 618,500 km, power: 330 kW (448.67 HP), first registration: 08/2018, fuel type: diesel, tire size: 315/60 R 22.5, axle configuration: 4x2, color: white, emission class: euro5, suspension: air, number of seats: 2, BIG Space 2.5m - Wheelbase 3700mm - low profile version with /60 tyres Standard fifth wheel, Jost JSK 42 - 390 l tank left side, 290 l right side aluminium - Mercedes PowerShift 3 automated gearbox - Gearbox with integrated GPS for reduced consumption (PPC) - High performance engine brake - Top Torque - Torque boost in 12th gear - Electric auxiliary air conditioning - Automatic climate control - Luxury lower bed - Hot water cab heater - Pneumatic driver's seat, comfort - Electric pop-up roof - Active Brake Assist - Attention Assist - Halogen fog lights - Electronic Stability Control (ESP) - Lane Keeping Assist - EPB braking system with ABS and ASR – Cruise Control – ADR EX/II EX/III FL AT Dwsdpfjviugxsx Akhoa

Condition: new, functionality: fully functional, Year of construction: 2026, Pothole Repair Complex MIRA-3 Pothole Repair Complex MIRA-3 by TICAB TM is a unique road repair system developed by TICAB engineers for optimization of road patching works. MIRA-3 complex includes infrared asphalt heater, asphalt recycler and bitumen emulsion sprayer. Dwedpet Itzzjfx Akhsa How to use MIRA-3 Complex: - Heating of the repair place. - Add a hot asphalt from the asphalt recycler. - Spraying the bitumen emulsion. MIRA-3 includes: - Infrared Asphalt Heater MIRA-3. - Bitumen Emulsion Sprayer BS-100. - Asphalt Recycler RA-500.

Condition: used, Year of construction: 2023, functionality: fully functional, fuel type: diesel, total length: 1,925 mm, empty load weight: 1,800 kg, construction height: 1,361 mm, drive type: Diesel, construction width: 1,110 mm, Other Dwjdpfxeumvb Ie Akhoa Condition (Technical): New Description: The CAT DE110E2 is an emergency power generator for construction sites, industry, and events. With its economical diesel engine and robust design, this generator is ideally suited for providing power during power outages and for mobile and continuous use. Durable, versatile, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. In addition to this device, we also offer aerial work platforms and telescopic loaders for rent and sale. Our equipment is regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-to-own options, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: new, Plant Type : Mobile Concrete Batching Plant with SINGLE SHAFT MIXER Plant Capacity: 60m³/ hour freshly compressed concrete Mixer Capacity: 1500/1000 lt (1m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. *EASY TRANSPORTATION Cec Ejflz Hwor Sf Ddegt Dwjdpfxewhl Dwo Akhja *MINUMUM INVESTEMENT FOR FIELD GROUNDWORK *QUICK INSTALLATION

Condition: new, MOBILE CONCRETE BATCHING PLANT M100-TWN Crsbtuhmoflz Hle N Aeb GENERAL Plant Type : MOBILE Concrete Plant with TWIN SHAFT MIXER Plant Capacity : 100m³/hour freshly compressed concrete Mixer Capacity : 3000/2000 lt (2m³ Compressed Concrete) Total Motor Power : 143kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION DETAILS: Compacted concrete capacity: 100 m³/h Air Compressor Capacity : 950 lt/min Dsdpfxewhxk Rs Akhowa Aggregate Hopper : 4 Bins : 4×11.25 = 45 m³ Mixer Type : TWIN Shaft (2 m³). 3000/2000 lt capacity Mixer Converyor Band : 1000 mm * 13000 mm Weighbridges: Aggregate/ Cement /Water/ Additives

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² Dwjdpfx Aovwku Uekhsa 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Dodpfxsq Auhdo Akhjwa Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used Dsdpfx Aeu Nuycjkhewa

Condition: used, Year of construction: 1991, Manufacturer Kohmann offers the F-1050 K Window Patcher Machine, produced in 1991. This machine is currently operational in a printshop located in Deutschland. The price for this equipment is available upon request. Notable features include a format of 1020 x 1050 mm. Kohmann, established in 1962, is renowned for its high-quality carton converting machines, including window patching machines and folder gluers. The company has a strong reputation for producing reliable and efficient machinery for the printing and packaging industries1. The F-1050 model is known for its robust design and ease of operation, making it suitable for various window patching applications. It is designed to handle different sizes and types of carton blanks, ensuring precise and efficient window patching Dwodpfx Akeyb R Adehoa Format: 1020 x 1050 mm

Condition: good (used), A used Batch Roaster for Almonds 2015 from J Borrell - gas fired - control unit including flues Ready to ship worldwide Export Documentation and Shipping options available Dwedpfx Aksx Nf Nvehea Please request pictures and videos via Whats App

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, total length: 5,000 mm, total width: 211 mm, total height: 240 mm, Used Heat and Control batch fryer 180 lbs from 1985, takeaway conveyor, auto stirr system. Rebuilt in 2019 with: new control system with PLC, new electric motors, Weishaupt burner (with higher output available if needed) from 2007 with new burner control. Hood and all controls included. Used by seller between 2020-2025. Now deinstalled and ready for shipment. Dedpfsx H Iqkox Akhewa

Condition: excellent (used), JD Manufacturing 2 x batch fryers with distribution system. with non stick stirring to prevent clusters. all s/s. Dwsdpfx Akjymr Skohea

Condition: like new (used), Stainless vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph Dsdpfofhdt Hex Akhswa

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Dwsdoxwc Nmopfx Akhja Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Dedpfovta Sbex Akhswa Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.