Used Autobetoniera Cifa 9Mc Construction Machine for sale (86,449)

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm total power requirement 4 kW Ijdpfov S Iqcsx Ag Aotn

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16 Itjdpfx Agjwuz Eke Asn

Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling PH150! Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period of the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mount: HSK-A 63 Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Drive power at 40% duty cycle: 35 kW Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter (front): 80 mm Spindle bearing inner diameter (rear): 55 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Tilting axis A Tilting angle towards the working spindle: +120° Tilting angle away from the working spindle: −120° Torque of tilting axis: 3,400 Nm Holding torque of tilting axis: 3,400 Nm Holding torque of tilting axis with hydraulic clamping: 6,200 Nm Rapid traverse of tilting axis: 40 rpm Feed rate of tilting axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of tilting axis A: A ≤ 9 arc seconds Permissible moment of inertia of tilting axis: max. 59 kg·m² Rotary axis C Rotary range of C-axis: 360° Torque of rotary axis: 2,000 Nm Holding torque of rotary axis: 2,000 Nm Feed rate of rotary axis: 7,200°/min Bidirectional accuracy of rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Iedpfxez I Tcie Ag Aotn Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers.

Condition: excellent (used), Year of construction: 1962, machine/vehicle number: 12.178, 🛠️ WALDRICH SIEGEN WS IIa 100/25 x 5000 CNC roll grinding machine – The perfect base for a retrofit! Get your hands on a high-quality roll grinding machine from WALDRICH SIEGEN – renowned for its exceptional stability and precision in heavy-duty applications. The machine was converted to CNC by Herkules in 1996 and is in excellent mechanical condition. ⚠️ Important – but your opportunity! The machine is currently not operational as the electrical equipment and CNC control system need to be replaced. 👉 Your advantage: Take advantage of this opportunity for a bespoke retrofit and get state-of-the-art technology at a fraction of the cost of a new machine. 💰 📊 Technical highlights 🔩 Grinding diameter up to 1,200 mm 📏 Length up to 5,000 mm ⚖️ Workpieces up to 25 tonnes ⚙️ Grinding wheel up to 900 mm Ø Itjdpfxefbb D Do Ag Aen 🚀 Drive power up to 97.5 kW 🎯 Precision up to 0.001 mm 🧰 Features 🔄 Cylindrical & crown grinding 🖥️ CNC grinding support 🔁 Automatic feed with wear compensation 🎨 Partially modernised & repainted 💡 Why this machine? ✅ Solid industrial quality ✅ Perfect for modernisation / retrofitting ✅ Ideal for large roller machining ✅ Significantly cheaper than comparable new machines 👀 Viewing available at any time! Flexible appointment available 📅

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Siemens Sinumerik 840D, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, Equipment: documentation/manual, Machine DURMA HD-FL 3015 III – 4 kW Year of manufacture: End of 2018 (as new) — Technical Data • Working area (X-Y-Z): 3060 × 1530 × 160 mm • Max. sheet size: 3048 × 1524 mm • Max. sheet weight: 200 kg/m² Maximum sheet thicknesses: • Mild steel: 20 mm • Stainless steel: 14 mm • Aluminium (AlMg3): 12 mm Dynamics & Precision: • Travel speed X-Y: 200 m/min • Synchronisation speed: 280 m/min • Acceleration: 20 m/s² • Positioning accuracy: ± 0.02 mm • Repeatability: ± 0.1 mm — Standard Equipment • CE-compliant version with shuttle table & light curtain safety system • Siemens SINUMERIK 840D CNC control • Precitec ProCutter cutting head F150 (auto-focus) • Automatic pallet changer system • Automatic sheet inspection (position & size) • Positioning laser diode • Automatic nozzle cleaning • Central lubrication system • Chip conveyor • User interface (power / speed / pressure) • External Metalix CAD/CAM software with autonesting • Illuminated working area • Multi-chamber extraction system • Warning beacon — Special Accessories • IPG 4000 W fiber laser source incl. chiller & compact extraction unit • Motorized chip conveyor • Linear drives for X1, X2, Y axes • Laser service kit • Automatic nozzle changer • Additional Metalix license — Special Arrangements • Roller container for slag & small parts (operator side) Itodpfjynbbqsx Ag Aen • Laser source, chiller & extraction system mounted above the machine • Machine frame to be manufactured by the customer

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control Itedpfx Agjyq Sl Ej Aon 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Coolant supply through the spindle 15 bar / 20 l/min Double screw chip conveyor for chip removal from the working area Synchronous tapping and thread milling Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Tool breakage monitoring and tool length measurement

Condition: good (used), functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, 6 kW Bodor Laser Cutter. 2 Years old with low usage (less than 4 hours per week). Comes complete with mezzanine floor to raise chillers, air compressors and extractors out of the way. Cuts up to 20mm thick hardox on Oxygen. Ijdoz Niv Aepfx Ag Astn Cuts up to 6mm mild steel on Compressed Air. Automatic door and work bed. Manual part trays underneath.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 350 mm, type of input current: three-phase, Sarix SX200HPM with integrated divider. Isdpfjz I R Tfex Ag Ajtn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Iodez Izquepfx Ag Astn Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Isdpfx Aoz Izu Tog Aotn Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Ijdpsrtrxisfx Ag Aotn Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Isdpfxertrzde Ag Astn Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Iedpfx Agjrtr D Ie Astn Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Itjdpfxjruahws Ag Ajn Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: excellent (used), Year of construction: 2015, Various Stainless Steel Conveyors & Packing Stations Itjdpfxjtqdq Ss Ag Aen 1. Low level belt conveyor, Fully Stainless Steel, Belt Dimensions - 1000mm L x 400mm W, Height adjustable feet, Complete with motor. gearbox Stop / Start Isolator, Box alignment side guide 2. Incline Belt Conveyor, Stainless Steel Frame, Belt Dimensions 2500mm L x 400mm W. Infeed height 500mm, Outfeed height 1350mm 3. High Level Box Collation Conveyor, Gravity Roller Conveyor for Box Collation, Dimensions 2500mm L x 400mm W x 1400mm H, Height adjustable legs / feet 4. Packing Station Conveyor, All stainless steel, Two Packing tables - dimensions 760mm L x 400mm W each, Conveyor dimensions - 2000mm L x 400mm W, Height adjustable feet, Adjustable box aligner / guide 5. Driven Roller Conveyor Stainless Steel, Dimensions - 2200mm L x 400mm W rollers, With top box closer adjustable plate, 2200mm L, Fully stainless steel, Complete with motor, gearbox, Stop / Start Isolator. 6. Gravity Roller Flexi Conveyor, Closed Dimensions 960mm L x 300mm W, Fully open 3200mm L, Height adjustable legs 7. Stainless steel conveyor with a food grade flat belt, 4000mm L x 350mm wide belt 8. More conveyors - call us for details

Year of construction: 2021, condition: new, Derryglan Ltd - Bagging Systems offer exceptionally reliable, cost-effective bagging solutions. We offer a range of semi-automatic & automated bagging machines for many applications. Itjdpsgq N Axofx Ag Aen We offer a full range of accessories to suit your requirements and application. With body material available in painted mild steel or stainless steel. The T-1000 Advanced Poly-Bagger is our 'top-of-the-line bagger'. It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 60 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger is also designed to run inline with punch/stamp presses, injection mould machines, blister machines and other continuous feed manufacturing equipment for inline bagging.

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm - Drill spindle mount: MK 3 Itodpodkx Anjfx Ag Asn - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Coolant system - Quick-change drill chuck 1-13 - Lighting

Condition: good (used), Year of construction: 2014, OCS Checkweigher Weight range min - 100grams, Max 800 grams Speed 30 pieces / min Power 230v / 50hz Complete with touch screen control Two pneumatic reject arms Itodpfx Aeucgaljg Aen Fully stainless steel Belt dimensions 1750mm x 195mm In good working condition

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Itodpfjzlt Aysx Ag Aen This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: like new (used), Year of construction: 2003, Basrijs towed transplanter Planting machine for soilblocks, such as lettuce and endive - Suitable for soilblocks of max. 5 x 5 cm - Distance between the rows adjustable, currently 35 cm with 4 rows- additional planting row currently disassembled this is only the element, it is not complete (no wheels, coulter, roller and belt included) - Max. distance between the rows with 5 rows, 35 cm - Max. distance between the rows with 4 rows, 44 cm - Track distance of the wheels, centre to centre 200 cm - Width of the roll 160 cm - Hydraulic lift planting units More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Iedpfx Agsz Rr I Rj Astn See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Itodpfx Agsz Rztvo Aen Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, swarf conveyor, through spindle coolant, Iodpsz Rz Nqefx Ag Ajtn

Condition: used, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: YC-2600, Toilet roll rewinding machine toilet roll cutting machine toilet roll packing machine air compressor one jumbo paper roll 1368kg more than 2000 paper cone free full package only €37000 Iodjz Ih T Ajpfx Ag Astn

Condition: good (used), Year of construction: 2016, Manufacturer: Baader Model: 604-530 Year: 2016 Condition: Used Serial number: 120002207 Stock number: 3450 Drum: 10 mm Infeed height: 2400 mm Outfeed height: 900 mm Power: 3 x 400V, 50Hz, 9.3kW Isdpfx Ajz R Niaeg Aetn Dimensions: 1600 x 1650 x 2900 mm Weight: 1700 kg Machine has only 1348 operating hours. Infeed hopper with mixing arm, touch screen control. Includes drum trolley, extra 10 mm drum, extra knife, and extra squeezing belt.

Condition: excellent (used), travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 395 mm, Table: 1,200 x 300 mm X-axis travel: 600 mm Y-axis travel: 350 mm Z-axis travel: 395 mm Tailstock travel: 127 mm Control unit: Fagor nv 300M Spindle power: 3 hp Spindle speed: 60 - 4,000 rpm Tool holder: Bt 40 Tool clamping: Automatic Iodpfx Asz R I R Aog Astn CE safety features Powered feeds Coolant pump Dimensions (width x length x height): 1,800 x 1,700 x 2,300 mm Weight: 1,900 kg