Used Baiker 1300 Shotblasting Line for sale (12,232)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). Kdjdjzu Nvzopfx Ai Rsr - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, Year of construction: 1986, x-travel 3300 mm y-travel 2200 mm z-travel 1300 mm w-axis 350 mm workpiece height 1700 mm milling spindle diameter 140 mm diameter of quill 230 mm milling head speed 40-2000 U/min transmission ratio 4 table surface area 4260x2000 mm T-slot - distance 175 mm T-slot - width 28 mm number of T-slots 11 workpiece weight 300000 kg milling spindle motor 30 kW Feed 5-3000 mm/min control Fidia weight of the machine ca. 80 t Machine has been overhauled The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Kdjdpeyqt T Rsfx Ai Rjr Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Kdjdpfx Aiezvn Tho Rjr Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile Kdodpfx Aiev Awguo Rsr - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. The machine is fully operational without any functional defaults. The machine comes with two new glue trays. Kdjdpfx Aijxdxf Ro Rsr Contact us for a quote, or visit our Test Center for a free demo.

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Kdedpfxjzknwcs Ai Rjr Program runtime: 5,812 hours Spindle runtime: 5,740 hours Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Travel Z-axis: 1300 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Kodon Nv Sdepfx Ai Rjdr

Condition: used, Grecon Dimter Opticut 704 Optimizing Saw An optimizing saw for demanding applications. A continuous chain transport system with a flexible upper clamping device, from the measuring station to the saw, ensures safe transport of wood that is tapering, twisted, heavily rough after sanding, and prone to splitting. Kdedpfxezvyk So Ai Ror A servomotor with a planetary gearbox provides very high acceleration due to its low moment of inertia. Waste is blown to the side in the cutting area. Thanks to its special design with an aluminum casting and a pneumatically controlled saw swing, very short cutting times are possible. The output is approximately 12,000–17,000 running meters per shift, with maximum cross-sections of the material being processed ranging from 100 × 100 mm to 30 × 250 mm.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: J10039A) Gantry-portal Loader (Double pick-up station) "MAHROS" Mod. Brush J10039B) 1st Double-side Sizing & Edge Bander "IDM" Mod. Activa SB 1/9900 J10039C) In-feeding Rollerway "MAHROS" Mod._____ with 90° Turning device (from lengthwise to crosswise) with double cone system J10039D) 2nd Double-side Sizing & Edge Bander "STEFANI". Mod. Performance SB2 Kodpohmkxqefx Ai Redr J10039E) 90° Converyor Translator "MAHROS", complete with motorised roller conveyor and 90° motorised belts to translate the panels to the MAHROS Unloader J10039F) Brush-cleaning machine "WANDRES" Mod. BI46/1/1300 J10039G) Gantry-portal Stacker (Double station) "MAHROS" Mod. Brush

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges Kdsdpfshbyr Ssx Ai Rjr e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – Fully automatic circular saw for tubes and profiles, year 2015. We offer for sale a fully automatic circular saw, the BLM Group ADIGE-SYS EM 80, designed for precise and highly productive cutting of tubes and profiles in serial production. The machine is equipped with a Siemens SINUMERIK CNC control system and an automatic material feeding system, which enables efficient and repeatable production of larger series. Technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment: automatic material feeding system fully automatic working cycle multiple tool/working positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters – see photos supply and feeding section of the line Siemens SINUMERIK CNC control The machine is particularly suitable for serial production of shorter parts made of tubes and profiles, where high productivity, repeatability, and cutting accuracy are required. Condition and history: The machine was purchased by the current owner approximately 2 years ago for a planned production project, which was ultimately not carried out. Therefore, it has not been used in production since then. The machine has undergone a refurbishment of the hydraulic brake seals on the bed. Kdedpozvm Dfjfx Ai Rjr Technical documentation in German is available, including complete electrical documentation. The offer also includes accessories and a set of clamping jaws shown in the photos.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0266, year of last overhaul: 2026, workpiece weight (max.): 3,600 kg, power of the milling unit: 10,250 W, disc diameter: 200 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Kjdpfxjztyhrs Ai Rodr Detailed information about the machines is provided in the attached file.

Condition: good (used), Year of construction: 2017, Modular line for unwinding, slitting, and cutting to length. Industrial processing of electrical steel sheets into small laminations for transformer manufacturing. Kdsdpfoy Tcw Eox Ai Rjr Function: unwinding, slitting, and cutting to length.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale Kdodpfxjzl Tc Ts Ai Rjr PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. Kodpfx Aied Nviqo Redr With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Kodpfxozcf Dle Ai Rjdr Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Year of construction: 1997, condition: excellent (used), For sale we offer a blockmold machine with the following specifications: Block dimensions: 1300 × 1040 × 5300/4000 mm – VARIO Kodpon Tn Hrsfx Ai Rodr PLC control system: SIEMENS S7 Vacuum system pumps: SIEMENS Hydraulic system pump: BOSCH After being purchased by our company, the block mold underwent a comprehensive inspection, including the removal of all internal panels and thorough cleaning of the internal steam and vacuum channels. The machine is in excellent technical condition and is characterized by high efficiency. The offer also includes a complete set of documentation, including electrical, hydraulic, pneumatic diagrams, and technical drawings. We also have other EPS polystyrene production machines available for sale, such as: ICI CALDAIE steam generator (2000 kg/h) 2× steam accumulators with capacities of 10,000 liters and 20,000 liters (RUTHS tank) 3× EPS block cutting lines 2× blockmolds Pre-expander (high-capacity continuous pre-expander) There is also the option to purchase a complete production line (including installation, commissioning, and operator training).

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll Ksdpfx Aeq Ulh Hei Rsdr 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: good (used), For Sale: Set of Three Dissolvers / Mixers (photos numbered accordingly) 1. UNIVERSAL DISSOLVER – PASQUALE MORENO GENOVA Technical Specifications: -Agitator drive: Electric -Column lifting: Hydraulic -Adapted for connection to a screw feeder for dosing powder -INOX stainless steel mixing tank (no drive) -Dispersing disk diameter: Ø 250 mm -Disk rotation speed: 1400–2800 RPM -Tank dimensions: Ø 110 cm × 100 cm (height) -Overall dimensions (L×W×H): 210 × 110 × 170 cm -Power supply: 380/400 V Kedpfowwh Hgex Ai Rjdr 2. DISSOLVER 3HP with Inverter Technical Specifications: -Electric column lifting -Inverter for smooth speed adjustment -Agitator motor power: 3 HP (2.2 kW) -Dispersing disk diameter: 200 mm -Shaft length with disk: 600 mm -Maximum lifting height: 1000 mm -Total height: 2200 mm -Power supply: 380/400 V 3. LABORATORY MIXER FERRI F30 – 1HP Technical Specifications: -Smooth mechanical speed control via knob -Manual column lifting with counterweight -Electrical control box -Suitable for small containers -Total height: 1300 mm -Overall dimensions (L×W): 600 × 600 mm (with control box: 600 × 800 mm) -Max disk lifting height: 600 mm -Motor power: 1 HP (0.75 kW) -Speed range: up to 2800 RPM -Power supply: 220/230 V Keywords: dissolver, mixer, process equipment, mixing machinery, agitator, machine sales, used machines, chemical industry, cosmetics industry, production line, mixing technology, chemical production, Diamac

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 TR TECHNICAL DATA: Model: KRANZLE THERM 1017 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Ksdpjy R Tfhofx Ai Rodr Connected power (kW): 5.5 Weight with accessories (kg): 198 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1017 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m professional-grade pressure hose WHY CHOOSE THE KRANZLE THERM 1017 TR? The THERM 1017 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1017 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose, a reel, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile. Kdedpfx Aisw Dd Hps Ror

Year of construction: 2015, condition: good (used), We are selling 3 used paper pulp thermoforming machines in good condition and additional equipment. Model TPM-1500, manufactured by "Taiwan Pulp Molding" - one of the world's leading companies in this area. Kdedpfonab Evex Ai Rer Thermoforming Line Description: 3 stage production (forming + drying 30t + hot pressing 50t). 480 v, 60 Hz; Manufacture date - Oct. 2015. Effective Molding Area, mm - 1500 x 900 x 120; Overall dimensions, mm - 7600 x 2250 x 3700; Weight - 16 tonnes; Production speed - up to 80 kg/h; The necessary quantity of operators - 1; Press pressure (critical for quality and performance) - 40t (1st) / 50t (2nd); Movement mechanism - Servo drive + ball screw, encoder positioning, accuracy +/- 0.01 mm for the drive, 0.05 mm for the mechanics; Automated sprinkles for quality improvement - For molds: adjustable time interval (15-20 bar). For products: automatic (2-3 bar); Safety - emergency stop button, optical sensors, zone security fences. Installed power - Up to 400 kW, depending on the type of product and quantity of heating elements. Features: 1. Completely dry-in-the-mold pulp product. 2. No distortion or variation in shape & size. 3. Smooth surface, highest quality finish in the industry. 4. Maximum mold utilization. 5. Suitable for various product's wall thicknesses. Suitable for the production of the following products: High-finish molded paper packaging; Single-use paper dishware; Single-use paper Cup lids; Paper Cup holders; Paper egg cartons; etc. Each Thermoformer set includes: Taiwan Pulp Molding Auto Stacker - TPM-AS-1500 0.5 HP, Two-Stage Auto Stacker 480 v, 60 Hz, Belt Width: 1500 mm; Cutes Water-ring Vacuum Pump (2017) - Cutes NN-1001FCD vacuum pump, 75 HP, 880 RPM, 1,000 CFM. Price per 1 Set: Thermoforming machine 300 000 euro + Autostacker 20 000 euro + Cutes water-ring vacuum pump 5 000 euros = 325 000 euros per set. If purchase few sets discount can be discussed. The last set includes a pulp preparation system and costs + 50 000 euros: 1. Taiwan Pulp Molding Co. Hydropulper w/Auto Feeding Conveyor (2017) - stainless steel hydropulper w/ 100 HP motor, 90" x 80" tall, w/ 47" x 44" x 31" dump hopper, including auto feeding conveyor; 2. BTG Instruments Consistency Control Unit - MnCPM-1300 type HX/Q0/C2/5/10 consistency transmitter unit; 3. Conical Refiner 75 HP; 4. Taiwan Pulp Molding Co. Cleaner Screen (2017) - 30 HP;

Condition: used, functionality: fully functional, Complete UV roller painting and finishing line for flat panels with: - maximum working width mm 1300 - maximum thickness mm 80 - minimum length mm 350 - feeding speed (m/min) 10 (from 5 to 20) - working height mm 900 - working side right - UV finishing types transparent, matt and semi-gloss In attachment you’ll find a drawing and the line component and details for each equipment Kedoywgmfopfx Ai Redr The line can be visited at 545600 Tarnaveni, Judetul Mures, Romania

Condition: used, Year of construction: 2009, x-travel . mm y-travel . mm z-travel . mm control SIemens type 840 D ECOLINE Shopmill Kdjdszdu Tdopfx Ai Rjr Tool changer 30 Fach dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2005, machine/vehicle number: PST36, Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern automation architectures for precise thermal treatment. Typical configurations include PID control of product and heating media with temperature, flow, and pressure instrumentation, as well as interlocks for safe operation. Integration with a plant PLC/HMI enables recipe management, trend logging, and alarm handling to stabilize outlet temperature and holding-time compliance. Operator safeguards and clear access points facilitate routine checks and adjustments while maintaining hygienic conditions. Quick disconnects and service-friendly plate pack design help minimize downtime during maintenance or format changes.Production Line Integration CapabilitiesDesigned for seamless integration upstream of filling and downstream of raw product reception or blending, the N35 aligns with beverage and dairy workflows in second hand and new industrial packaging environments. It pairs effectively with homogenizers, balance tanks, deaerators, and CIP systems, and can feed fillers handling PET, glass, or carton packaging in beverage production lines.Machine Condition & Maintenance HistoryThis unit is offered as a second hand plate pasteurizer formerly used in milk production. Its robust stainless-steel design and APV engineering support reliable recommissioning in a new beverage production or food-processing facility. Routine service of seals, gaskets, and instrumentation is recommended to align with site-specific quality protocols before startup.Operational Performance & VersatilityThe APV N35 delivers stable outlet temperatures and consistent holding times suitable for HTST pasteurization. The plate pack enables efficient heat recovery, optimizing energy use and reducing thermal load on utilities. The unit’s performance characteristics make it a strong fit for dairy applications such as milk, with potential adaptability to other heat-treatable liquid foods or beverages when configured with appropriate elastomers, plate patterns, and thermal profiles.Installation Requirements & Site PreparationPlan installation with the stated dimensions and allow service clearance for... Kdodpfxoznvfce Ai Rsr