Used Baumann Gx60/14/50 for sale (41,048)

Condition: ready for operation (used), Heidenhain UVR 150D ID: 390 421-01 SN: 12932146 – with test report, professionally overhauled and fully tested with 3 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective core must not have mechanical damages such as breakages, as these cannot be repaired. In such cases, an additional invoice of €1,000 including VAT will be issued. Attention: You are bidding on an inverter from Heidenhain, Heidenhain UVR 150D 390 421-01 SN12932146 as an exchange service, professionally and completely overhauled and tested with 3 months warranty, 100% functional, delivery contents as per photos. In both the repair and exchange procedures, your returned unit must not show any mechanical damage such as breakage, as these are irreparable. Otherwise, a subsequent charge of €1,000 incl. VAT will be made. Bdjdpfx Aezqxwmephef

Condition: used, functionality: fully functional, Year of construction: 2007, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 1,960 mm, fuel type: diesel, mast type: duplex, construction height: 3,860 mm, fork carriage width: 1,600 mm, fork length: 1,700 mm, empty load weight: 27,300 kg, total length: 6,050 mm, drive type: Diesel, construction width: 2,800 mm, Side loader Load center: 800 Fork width: 460 mm Bodpfx Aey U R Arophjdf Fork thickness: 90 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GCS180/18-17/40SFH. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment. Telescopic forks: 1700 / 2900 mm Heater, full cab, full free lift

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 550 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 550 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 Bjdpfozqc R Dox Aphjdf - Crossbars in orange - New BLT / PR55 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 550 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2220,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Stand in galvanized - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 250 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1280,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Bsdpfjzqc Rdsx Aphjdf Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), This pre-owned Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. The modular high-bay racking is ideally suited for logistics, industry, large warehouses, and forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 6,000 kg, this immediately available pallet rack system offers an efficient solution for storing Euro pallets and heavy cargo units. PRODUCT DETAILS: - Height: approx. 825 cm - Depth: approx. 105 cm - Length: approx. 1,400 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam colour: yellow painted - Frames: approx. 825 x 105 cm, pre-assembled - Frame colour: blue painted - Levels: floor + 4 - Pallet spots: 75 incl. floor levels - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 06 x frames (approx. 825 x 105 cm), pre-assembled - 40 x beams (approx. 270 cm) Bdjdpfxezqad Us Aphsf - 80 x locking pins Price: €1,700 net €2,023 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty rack systems from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to provide you with a non-binding quote – tailored to your specific requirements. Whether for new builds, conversions, or expansions, we will advise you professionally on your racking configuration. SHOWROOM: Feel free to visit our showroom! On-site, you can get a comprehensive impression of our pallet racking, storage shelving, and other solutions. Many systems are assembled and can be experienced firsthand. Our expert consultants are available for questions and individual advice – we look forward to your visit! Still haven’t found the right solution? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or call. You can find our phone number on our company page. ☎️ We are available by telephone Monday to Friday, 8:00 am to 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed to meet demanding industrial storage requirements. The modular high-bay racking is ideally suited for logistics centers, industrial operations, large warehouses, and freight forwarding companies. With a load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 1,400 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow powder-coated - Frames: approx. 400 x 105 cm, pre-assembled - Frame color: blue powder-coated Bodpfezqab Hex Aphodf - Levels: Floor + 2 - Pallet spaces: 45 including ground level - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 06 x frames (approx. 400 x 105 cm), pre-assembled - 20 x beams (approx. 270 cm) - 40 x locking pins Price: €1,060.00 net €1,261.14 gross An invoice with VAT shown separately will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner hauliers – shipping costs depend on delivery postcode - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer – tailored exactly to your requirements. Whether for new builds, upgrades or expansions – we will support you with expert advice on your racking configuration. SHOWROOM: Visit us in our showroom! Experience our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled for live demonstration. Our experts are available for your questions and individual consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many more products and variations! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone – our telephone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Bdjdpfezqabgox Aphef Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Bdedpfozqaa Nsx Aphof

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 Bodey Hm E Hjpfx Aphodf ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating feature (Type Jost JSK), mounted on the subframe. ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel plate is then mounted on the chassis. The crane and superstructure, including the fifth wheel plate, can also be used in combination. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler undercarriage would also be available; the net price is €149,900. ? Mounting/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Platform body as a steel/welded construction, removable. ? Length approx. 380 cm, width approx. 248 cm. ? Platform body painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized finish with steps, removable stake pockets. ? Standard platform floor with welded 4 mm steel checker plate, painted in RAL (chassis color). ? 6 recessed lashing eyes, 2500 daN each, per side, in a slot profile with flexible arrangement. ? 4 lashing points for chains 6500 daN (2 in the front and 2 in the rear of the superstructure). ? Stable front wall consisting of a welded frame, welded steel sheet 4 mm and 5 accessory hooks, front wall height approx. 1300 mm, steel, painted, with 2 folding eyelets for lashing straps, welded on. ? Side panels, mudguards made of aluminum checker plate (sandblasted, powder-coated and painted). ? Multifix stake pocket rows, 2 rows with a distance of approx. 80 cm from the front and rear walls. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support under the chassis. ? Mounting of an underrun protection at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with endless rotation, fully assembled, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane are carried out according to the technical regulations and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection certificate. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on the left and one on the right, arrangement to be agreed upon. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. Bdjdpfey Hm Eyex Aphsf The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. ? 4 x yellow LED light strips, 1x mounted on each support. Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. Bjdpfx Aoy Hm Etsphedf ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: used, mileage: 541,000 km, first registration: 12/2017, fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2017, = Further options and accessories = - Air suspension = Remarks = Iveco Eurocargo 140 E 250 refrigerated truck with Mitsubishi TDJ 430 D refrigeration unit, Lamberet Multitemp box body and tail lift Chassis: • Emission standard: EURO 6 C • 250 HP engine, 6,728 cm³ • Cruise control • Leaf/air suspension • Automatic transmission • Lane departure warning system • Brake assist • Hill start assist • Differential lock • ABS • ASR / can be deactivated • Airbag • Air conditioning • Central locking • Double passenger bench seat (3-seater) • Electric windows • Fog lights • Headlight range adjustment • Tire size: 285/70 R 19.5 • Tread depth: 8/6/6/5/9/13 • Gross vehicle weight: 14,000 kg • Unladen weight: 8,580 kg • Payload: 5,420 kg! • Overall vehicle dimensions: 9,130 x 2,600 x 3,450 mm (LxWxH) Superstructure: LAMBERET refrigerated box, year 2017 • 17 pallet spaces • 3-wing rear portal doors • Aluminium protective rails, 2 each right and left, lower and upper • Double lashing rails, right and left • Floor: aluminium chequer plate • Internal dimensions: 6,980 x 2,470 x 2,200 mm (L x W x H) • BÄR BC1500 S4-B4 tail lift, upright • Lifting capacity: 1,500 kg Refrigeration unit: • Mitsubishi TDJ 430D Multi refrigeration unit (year 2017): • Engine/electric (380 V) • Remote control in driver's cab • Temperature recorder - German vehicle - 1st owner! Bsdowmmxtspfx Aphodf - TÜV / main inspection / SP: new Errors and prior sale excepted!

Condition: used, mileage: 148,000 km, power: 180 kW (244.73 HP), first registration: 07/2018, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,300 mm, loading space width: 2,270 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, tail-lift, Volvo FL 240 Flatbed with Tarpaulin, Drop-Side Body, Euro 6, ORIGINAL, 145,000 km For inquiries: 0726695 * Condition: very good * Output: 177 kW / 240 hp * Displacement: 5,132 cc * ABS * EBS * Differential lock, rear axle * Adaptive cruise control with emergency braking assist * Lane keeping assist * AdBlue tank on the right side * Air-suspended comfort driver's seat * Air conditioning * Electric windows, driver/passenger * Electrically heated and adjustable mirrors * CD radio / AUX / USB / Bluetooth Bdjdjzq Iqiepfx Aphof * Fog lights Tail lift: Zepro Load capacity: 1,500 kg Body: Box van * Wooden wear-resistant floor * Rub rails, left/right * Aluminum drop-side panels * Raised front panel / aluminum * Safety roof Dimensions (cargo space/loading area) Cargo space length: 7,300 mm Cargo space width: 2,270 mm Cargo space height: 2,700 mm Tires: 1st axle: 245 / 70 R 17.5, leaf-sprung / 50% 2nd axle: 245 / 70 R 17.5, air-sprung / 50% ----Price: €29,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and…? Typographical errors, errors and prior sale are subject to change.

Condition: used, mileage: 145,000 km, power: 320 kW (435.08 HP), first registration: 11/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro5, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes-Benz Actros 3244 3-way tipper with retarder, 8x4, Euro 5 Internal number for inquiries: 0726696 * Condition: very good * Engine power: 320 kW / 440 hp * Retarder: Voith * ABS + ASR * ESP * Differential lock, rear axle * Storage compartment on engine tunnel * Audio system: CD radio / Bluetooth * Construction site vehicles * Auxiliary drive: MB 2C * Sliding/lifting sunroof, electric (glass) * Driver's seat: comfort suspension seat * Sun visor * Automatic daytime running lights * Twin-plate clutch * 2nd front axle, steered * Emission standard: EURO 5 * Axle configuration: 8x4/4 * Trailer coupling: towing hitch * Exhaust muffler, vertical, behind the cab * Exterior mirrors, electrically adjustable and heated * Cab: S (short) * Suspension: leaf / leaf * Power windows * Wheelbase: 4200 mm * Rear window Bedjzq Ip Eepfx Aphedf * Permissible total weight: 32,00 t Body/superstructure: 3-way tipper Tires: 1st axle: 315 / 80 R22.5, 30% tread, leaf spring suspension 2nd axle: 315 / 80 R22.5, 35% tread, leaf spring suspension, steered axle 3rd axle: 315 / 80 R22.5, 40% tread, leaf spring suspension 4th axle: 315 / 80 R22.5, 30% tread, leaf spring suspension ----Price: 69,900 EUR + 19% VAT For further questions, you can reach us on the following numbers: * * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale are subject to change.

Condition: used, mileage: 176,200 km, power: 184 kW (250.17 HP), first registration: 02/2014, fuel type: diesel, empty load weight: 9,475 kg, maximum load weight: 8,525 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,400 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 7,000 mm, Equipment: ABS, crane, cruise control, differential lock, low noise, onboard computer, soot filter, MAN TGM 18.250 flatbed truck with crane First registration: 2/2014 Only 176,200 km, with documentation Euro 5 emission class Short cab Automatic transmission Air suspension, rear axle Bodpfxozd Amro Aphjdf Tires 315/70 R19.5, tread depth approx. 60% Flatbed: 7000 mm Wheelbase: 5400 mm Permissible total weight: 18,000 kg Unladen weight: 9,475 kg Crane: HMF 1430 Year of manufacture: 2013 Radio remote control 5 extensions in total, 3x hydraulic and 2x mechanical 4.40 m / 2870 kg 6.30 m / 1910 kg 8.30 m / 1400 kg 10.40 m / 1110 kg 12.70 m / 840 kg (mechanical extension) 15.00 m / 650 kg (mechanical extension) Hook height approx. 19 meters Export/net price: 29,900 euros All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 176,200 km, power: 184 kW (250.17 HP), first registration: 02/2014, fuel type: diesel, empty load weight: 9,475 kg, maximum load weight: 8,525 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,400 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 7,000 mm, Equipment: ABS, crane, cruise control, differential lock, low noise, onboard computer, soot filter, MAN TGM 18.250 flatbed truck with crane Bsdezd Al Uopfx Aphjdf First registration: 2/2014 Only 176,200 km with documentation Euro 5 emission class Short cab Automatic transmission Air suspension on rear axle Tires 315/70 R19.5, tread depth approx. 60% Flatbed: 7000 mm Wheelbase: 5400 mm Permissible total weight: 18,000 kg Unladen weight: 9,475 kg Crane: HMF 1430 Year of manufacture: 2013 Radio remote control 5 extensions in total, 3x hydraulic and 2x mechanical 4.40 m / 2870 kg 6.30 m / 1910 kg 8.30 m / 1400 kg 10.40 m / 1110 kg 12.70 m / 840 kg (mechanical extension) 15.00 m / 650 kg (mechanical extension) Hook height approx. 19 meters Export/net price: 29,900 Euros All information without guarantee, subject to errors.

Condition: used, functionality: fully functional, total width: 14,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, This used Nedcon pallet racking system is a robust and space-saving solution for industrial storage requirements. This heavy-duty racking system is ideal for warehouses, logistics, industry, workshops, and forwarding agents. With the durable Nedcon PR2 crossbeams and matching frames, the racking system offers a reliable way to store Euro pallets and heavy load units. PRODUCT DETAILS: Height: approx. 350 cm Depth: approx. 110 cm Length: approx. 14 linear meters Shelf load: up to 3,000 kg Bay load: up to 9,000 kg Crossbeams: approx. 270 x 11 x 4 cm PR2 Product number crossbeams: CC1104015 Frames: approx. 350 x 110 cm, pre-assembled Frame color: Blue Crossbeam color: Orange Levels: Ground + 2 Pallet spaces: 45 incl. ground spaces Condition: Used Nedcon DELIVERY SCOPE: 06 x Frames approx. 350 x 110 cm, pre-assembled 20 x Crossbeams approx. 270 x 11 x 4 cm PR2 40 x Locking pins Depending on current stock, we can also offer suitable Nedcon frames with a height of approx. 400 cm. Price: €920.00 Net €1094.80 Gross You will receive an invoice with VAT shown. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams, optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your requirements. Whether it is a new construction, renovation or extension – we will advise you competently on your racking configuration. SHOWROOM: Bdjdpfx Apszpwgdshof Feel free to visit us in our showroom! Here you can get a comprehensive picture of our pallet racking, storage racking and other solutions. Many systems are set up and can be experienced directly. Our technical consultants are available to answer your questions and provide individual advice – we look forward to your visit! Haven't found what you're looking for yet? Visit our website, where you will find a quick overview of many offers & variations of the products! ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Simply contact us by message or phone. You will find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and your number, and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 650 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 650 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR65 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 650 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2400,00 € net Bedpfozpv Nqjx Aphodf plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm Bodpozpvztefx Aphedf - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 450 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1640,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 350 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 350 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load Bedpfozpvvwsx Aphsdf - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR35 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 350 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1460,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, mileage: 129 km, power: 100 kW (135.96 HP), color: white, gearing type: mechanical, loading space length: 35,000 mm, loading space width: 20,700 mm, loading space height: 4,000 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, Mr. J. Ebert will be happy to assist you. Iveco Daily 35S14B flatbed truck Manual 6-speed gearbox, FPT 2850.6, 2.3 l diesel engine, EU6eB, 100 kW (136 hp), emission standard Euro 6e BIS (2.3L LD), manual air conditioning, comfort driver's seat, static with armrest and lumbar support, digital DAB radio with 7-inch touchscreen, cruise control, comfort soundproofing, rear wall insulation, plastic steering wheel with function buttons for radio, telephone, cruise control, and menu navigation, ConnectivityBox 4G, central locking with remote control, electric windows for front doors, seat covers in fabric, seats not heated, rear-view camera with dynamic guide lines, parking sensors at the rear, emergency braking assist AEBS with City Brake, traffic sign recognition with intelligent speed assist (ISA), proactive steering assist with lane keeping assist (ELK), driver drowsiness warning system, tire pressure monitoring system (TPMS), accident data recorder, front airbags for driver and passenger with seatbelt pretensioners, seatbelts with warning signal for driver and passenger, speed limiter 160 km/h, trailer coupling with ball head, long material carrier at the front with cab protection, wheelbase 3450 mm, leaf spring suspension rear axle, quad-leaf transverse leaf spring suspension front axle, exterior mirrors electrically adjustable and heated, light and rain sensor, outline lights on the flatbed, headlights at the front halogen, daytime running light system, tires 225/65 R16, fuel tank 63 liters, AdBlue tank 20 liters, and more. Bdodpfxjzp Ucie Aphjf - We would be happy to provide you with an offer for the trade-in of your used vehicle. - If you would like to lease or finance your vehicle, we will be happy to provide you with a customized offer. - Errors and prior sale excepted! - Mr. J. Ebert will be happy to assist you by phone at: / You can find more information on our website: ... ESP = Further information = Engine displacement: 2,287 cc GVWR: 3,500 kg Please contact Tobias Ebert for further information.

Condition: used, machine/vehicle number: 16766, Year of construction: 2018, operating hours: 5,129 h, load capacity: 1,400 kg, lifting height: 9,280 mm, load center: 600 mm, fuel type: electric, mast type: simplex, fork length: 1,150 mm, 5073488 Bjdpfx Apeyihhwshodf Serial Number: FN573788

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 2,534 h, load capacity: 4,999 kg, lifting height: 7,600 mm, fuel type: diesel, empty load weight: 10,780 kg, drive type: Diesel, construction width: 2,490 mm, Rigid telescopic forklift Load center: 0 Technical condition: New Front tires Condition: 80 - 100% Bdedpfevgh Iqsx Aphsf Rear tires Condition: 80 - 100% Rear work lights, front work lights, full cab, CE certificate, Pictures may serve as symbolic representations - Fork carriage CAT 1260 5T F 150x50x1200 - Heatable rear view mirror - 4x additional LED work lights - LED road lighting front - Screen 7 inch - Wheel chocks - LED work lights on boom head on fixed part 2x - Manual hand throttle - Tüv Vorb. 40 km/h - Flowlimiter - Comfort Steering System CSS - hydr. Quick hitch system - car radio USB Bluetooth with external microphone 100W - intelligent hydraulics - regenerative hydraulic vibration damping Active CRC - remote control button for the EASY Connect System ECS - automatic start/stop system Stop Start - automatic climate control - Pack Platinum - Highview camera x1 on the boom head - adaptive, air-suspended textile seat with heating - automatic wheel alignment - central lubrication system AGS Chassis boom - Easy Link Std. module - tractor homologation and road approval Germany

Condition: used, mileage: 354,924 km, power: 140 kW (190.35 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 6,890 kg, maximum load weight: 7,110 kg, overall weight: 14,000 kg, tire size: 245/70R19,5, axle configuration: 4x2, wheelbase: 5,670 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 43 m³, loading space length: 8,014 mm, loading space width: 2,500 mm, loading space height: 2,181 mm, front tire size: 245/70R19,5, rear tire size: 245/70R19,5, Equipment: ABS, cruise control, electronic stability program (ESP), onboard computer, tail-lift, traction control, Iveco Eurocargo 140-190 E6 box van - Body dimensions (L x W x H, internal) 8.01 x 2.50 x 2.18 m - Box van body - Automatic transmission Bdedpezn H T Rsfx Aphsf - Engine brake - Cruise control - Suspension: leaf spring / air - Electric mirrors + power windows - EURO 6 - Payload: 7,110 kg - Tires: 285/70R19.5 Very good condition. Export price. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders; therefore, our listings always include the export price, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase agreement are binding. Subject to changes, errors, typos, and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, mileage: 140,000 km, power: 96 kW (130.52 HP), first registration: 01/2020, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,100 mm, Year of construction: 2020, - Used Truck: Ford Transit 350, Twin-Wheel configuration with Three-Sided Tipper Body - Registration: 01.2020, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed gearbox, Mileage: 140,000 km. - Gross Vehicle Weight: 35 tons, Payload: 10 tons, Twin rear wheels, Leaf spring reinforcement kit. - Equipment: Cantoni three-sided tipper body, External dimensions: 3,300 x 2,100 mm, Sideboards height: 400 mm, Lifting mechanism with No. 5 hydraulic cylinders, Front pole carrier with net, Rear pole carrier, No. 2 winch with tensioning cable, Rear light protection net, Spare wheel. - Equipped with: Air conditioning, Radio-Bluetooth, USB and Smartphone holder, Start-Stop system, On-board computer, Central locking, Two keys, Driver airbag. - Bodywork and interior in excellent condition, Mechanics with a 12-month dealer warranty. - Unique Vehicle - One Owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy, opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified Mileage. - Road test possible by appointment. - Ownership transfer can be arranged on-site. - Customized financing options available. Carlo Mauri Srl disclaims all responsibility for any unintentional discrepancies in the advertisement, which does not constitute any contractual commitment. The prices quoted are exclusive of VAT and ownership transfer fees. Bdedpfey Sti Aex Aphjf