Used Baykal Baykal Aphs 21060 for sale (331)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Manufacturer: OMET S.r.l., Italy Model: MP Advanced Machine Type: Flexographic Plate Mounter Year: 2011 Serial No.: 1487 MPA Working Width: approx. 430 mm Condition: Good used condition FGT Condition Rating: ★★★★★☆☆ 8/10 Availability: Immediately available Why this machine is interesting The OMET MP Advanced is designed for accurate and repeatable mounting of flexographic printing plates. Its dual-camera positioning system supports precise register preparation and can significantly reduce press setup time, start-up waste, and register corrections. This is a particularly attractive solution for narrow-web label and packaging printers looking to improve efficiency through offline plate preparation. Main Configuration • Dual-camera positioning system • Two independently adjustable camera units • Central operator monitor • Digital position displays • Precision linear camera movement • Plate cylinder mounting section • Mechanical cylinder support system • Adjustable positioning components • Robust industrial machine frame • CE marked Suitable Applications Ideal for: • Self-adhesive labels • Paper and film labels Codezkawujpfx Adrjrh • Flexible packaging • Multi-color flexographic printing • Narrow-web converting applications Main Benefits • Accurate plate positioning • Improved register repeatability • Faster job preparation • Reduced press downtime • Lower start-up waste • Offline cylinder preparation • Reduced operator-dependent mounting errors Scope of Supply • OMET MP Advanced plate mounter • Dual-camera system • Central monitor • Digital positioning displays • Cylinder mounting and support section • Standard equipment as installed Additional adapters, sleeves, cylinders, or tooling are subject to separate confirmation.

Condition: used, Year of construction: 2011, Printing Specifications Printing process: Flexographic Number of colors: 8 Maximum material width: 1280 mm Maximum print width: 1200 mm Minimum repeat length: 380 mm Maximum repeat length: 840 mm Maximum machine speed: 300 m/min Equipment Crsdpfozk Hw Ujx Adreh Drive system: Fully automatic, gearless Ink pump system: Phonematic with AutoWash Web guiding / Camera system: FIFE Anilox Rollers Quantity: 8 Face length: 1260 mm Engraving length: 1240 mm Outside diameter (OD): 171.88 mm Inside diameter (ID): 149.722 mm Printing Sleeves Quantity: 8 Inside diameter (ID): 114.708 mm Face length: 1210 mm

Condition: used, This listing is for a Atas Optic 2 Programmable Injector GC Cjdpfxoxzhrzo Adrjrh

Condition: used, Year of construction: 2001, 8 colors Printing width (endless sleeves) Max.: 1270 mm Printing width (non-endless sleeves) Max.: 1250 mm Maximum mechanical machine speed: 460 m/min Gear pitch: 10 mm Printing length / repeat: 300–1200 mm Material width: max. 1320 mm Materials Suitable for processing: LDPE, PP, PA: 20–150 µm HDPE, OPP: 12–100 µm Laminated films: max. 120 µm Paper: 30–120 g/m² Unwind / Rewind Maximum roll diameter, unwind: 1000 mm Maximum roll diameter, rewind: 1000 mm Core inside diameter: 76 mm Core outside diameter: 85 mm Maximum roll weight: 1240 kg Drying system Printing unit supply air: max. approx. 5,250 m³/h Printing unit fresh air: approx. 2,620 m³/h Bridge supply air: max. approx. 8,430 m³/h Bridge fresh air: approx. 2,150 m³/h Recirculated air: approx. 5,600 m³/h Supply air temperature, printing unit: max. 100 °C Supply air temperature, bridge: max. 120 °C Equipment / Features W&H Turboclean ink supply system Unwind and rewind units Drying system Corona treatment Operator control system Cjdpfxozvfgfe Adrerh Printing cylinders and accessories Anilox rollers Portalift system

Condition: good (used), Year of construction: 2001, functionality: fully functional, TECHNICAL CONFIGURATION Printing and Drying • 6 flexographic printing units • UV drying system • Hot-air drying system • Combination of UV and water-based ink applications possible, depending on production requirements • Varnishing capability Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Adjustable turn bar system • Turn bar can be positioned flexibly between the individual printing units Converting Equipment • 2 rotary die-cutting stations • 1 die-cutting station equipped with a gap system • Slitting unit • Perforation unit • Inline finishing and converting capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration during production Included Accessories The machine is offered together with a selection of production accessories, including: • Magnetic cylinders • Printing cylinders • Anilox rollers A detailed accessory list can be provided upon request. _____ WHY THIS GALLUS EM 280?  Complete Inline Production Solution The machine combines printing, varnishing, die-cutting, perforating, and slitting in one production line. This allows finished labels to be produced in a single pass and reduces additional handling between production stages.  Flexible Six-Color Configuration The six flexographic printing units provide sufficient color capacity for a wide range of standard and premium label applications. The additional varnishing capability enables protective or decorative surface finishing.  UV and Hot-Air Drying The combination of UV and hot-air drying increases production flexibility and allows the machine to process different ink and coating systems. Crodoztqcmepfx Adreh  Flexible Turn Bar System The adjustable turn bar can be positioned between different printing units. This offers additional flexibility for reverse-side printing, adhesive-side printing, and special multilayer label applications.  Two Rotary Die-Cutting Stations The two rotary die-cutting stations allow more complex converting operations to be carried out inline. One station is equipped with a gap system for improved adjustment and production accuracy.  Integrated Quality Inspection The camera inspection system supports continuous quality control during production and helps minimize waste caused by printing or registration errors.  Proven Gallus Engineering The GALLUS EM 280 is known for its mechanical stability, long service life, and straightforward operation. It remains a reliable production platform for medium-sized label converters, specialist applications, and international export markets. Very Well-Maintained Condition The machine is located in Germany and has been maintained in very good overall condition. Based on the available information, we rate the machine at approximately: Condition: ★★★★★☆☆ 8 out of 10 stars.

Condition: used, Year of construction: 2008, Technical data: Printing Section - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder Codpoxlrd Nefx Adrorh - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: good (used), Year of construction: 1997, functionality: fully functional, Technical Offer – Gallus EM 410 S Manufacturer: Gallus Ferd. Rüesch AG / Arsoma Druckmaschinen GmbH Model: Gallus EM 410 S Year: 1997 Incoterm: FCA FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is interesting The Gallus EM 410 S is one of the most successful servo-driven UV flexographic presses ever built for the narrow web label industry. Thanks to its modular design, high production speed, and comprehensive inline converting equipment, it is perfectly suited for self-adhesive labels, flexible packaging, filmic materials, and premium label applications. Delivered complete with printing cylinders, anilox rolls, and magnetic cylinders, the machine offers an excellent opportunity to start production immediately while significantly reducing tooling investment. _____ Technical Specification • 8 UV Flexographic Printing Units • Web Width: 410 mm • Maximum Printing Width: 410 mm • Mechanical Speed: Up to 150 m/min • Print Repeat: Approx. 254–648 mm (depending on cylinders) • UV Flexo Printing (Front & Reverse) • Servo-Driven Technology • Electrical Supply: 400 V / 50–60 Hz / 3 Phase / 80 A Web Handling • Unwinder for rolls up to 800–1,000 mm Cjdpsznwhrsfx Adrsrh • Maximum Unwind Diameter: 1,000–1,250 mm • Double Rewinder • Maximum Rewind Diameter: 800–1,250 mm • Automatic Electronic Web Guide (E&L or equivalent) Drying & Finishing • IST Metz UV Drying System • Corona Treatment • Teknek Web Cleaning System • Turnbar System • 2 Rotary Die-Cutting Stations with GapMaster • Inline Laminating Unit Quality Control • SES SensoTec Register Control System • Register Accuracy: ±0.1 mm • OkiSystem Sentinel Defect Detection System Printable Materials • Paper • PE Films • PP Films • PET Films • Self-Adhesive Materials • Lightweight Carton _____ Included Equipment • Complete set of Printing Cylinders • Complete set of Anilox Rolls • Magnetic Cylinders • Automatic Web Guide • Turnbar • Corona Treater • Teknek Web Cleaner • 2 × Rotary Die-Cutting Stations with GapMaster • Inline Laminating • IST Metz Multi-Lamp UV System • Double Rewinder • Register Control • Defect Detection System _____ Main Advantages • Proven Gallus servo-driven technology • High production speed up to 150 m/min • Complete inline converting configuration • Extensive tooling package included • Modular platform compatible with Gallus EM 260 / EM 410 / EM 510 • Ready for immediate production with minimal additional investment _____ The machine can be inspected while running. Should you require further information, additional photographs, or wish to arrange an inspection, please do not hesitate to contact us. We look forward to hearing from you.

Year of construction: 2008, condition: good (used), ROTOFLEX VLI 330 Inspection – Slitting – Rewinding Machine Manufacturer: ROTOFLEX International Model: VLI 330 Year: 2008 Serial No.: VLI 3517 Working width class: 330 mm Electrical: 380 V / 50 Hz / 3 Phase Condition: Very good working condition Current status: Still in production Availability: Approx. 3 months, after installation of the owner's new finishing line Crjdpfozww Ikjx Adroh BRAND-NEW INSPECTION TECHNOLOGY BST TubeScan – Installed / Replaced in 2025 The machine is equipped with a modern: BST TubeScan Digital Strobe 4000 Inspection System The complete camera / inspection system was replaced in 2025 and is therefore almost new. This represents a considerable added value compared to many older Rotoflex machines currently available on the used machinery market. The system allows the operator to monitor the printed web during production and supports reliable quality control of finished labels. MACHINE APPLICATION The Rotoflex VLI 330 is designed for professional finishing and inspection of label material. Typical applications include: · Inspection of printed labels · Slitting of master rolls into finished rolls · Rewinding · Removal and correction of defective material · Quality control · Preparation of finished rolls for delivery · Processing of pressure-sensitive label materials · Paper and film label applications

Condition: used, Year of construction: 1933, functionality: fully functional, overall weight: 5,000 kg, total length: 4,000 mm, total height: 2,000 mm, total width: 2,000 mm, Lithographic press 55 x 75 cm. The machine is in very good mechanical condition, but will definitely require new rollers for printing. All spindles are present and some are still usable. Ideal machine for art studios or lithography workshops to produce high-quality lithographs. Very rare machine. Crsdpfx Adjx D Tnasrsh

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 9) The unit is in full working condition and is ready for immediate release. The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). Cjdsxtnquepfx Adrerh The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks

Condition: good (used), Year of construction: 2006, The machine is equipped with a highly flexible combination of different printing technologies: 8 printing units • 5 x offset printing units • 3 x rotary screen printing units • 2 x flexographic printing/coating units This combination makes the machine particularly suitable for sophisticated label production that requires several printing and finishing processes in a single production line. Included are, among other things: • Numerous printing cylinders Codpfozww N Usx Adrerh • Magnetic cylinders • Extensive anilox rollers • Printing and converting accessories • Screen printing equipment • Additional machine-specific tooling A detailed tooling list can be provided upon request, subject to final inventory. _____ COMPLETE MACHINE CONFIGURATION Printing at all 8 printing units • 5 x offset printing units • 3 x rotary screen printing units • 2 x flexographic printing/coating units Web Handling • Martin Automatic unwinder • Rewinder • Web guiding / web edge control • Corona treatment Drying • UV drying system Inspection • Camera / web inspection system Finishing & Converting • Flexo varnishing station • Rotary hot foil • Cold foil • Rinio embossing unit • Lamination system • Kocher & Beck rotary die-cutting Tooling • Printing cylinders • Magnetic cylinders • Anilox rollers • Screen printing accessories • Additional tooling and machine-specific accessories _____

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Crodpfx Adevakdzsrsh Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Cedpfx Aexmkctedrerh

Condition: good (used), Year of construction: 2019, XEIKON CX3 Manufacturer: Xeikon  Model: CX3  Technology: Dry toner digital printing  Year of manufacture: 2019 Crodpfxsyhpyzj Adrsh  Counter reading: 23,840,536 A3 prints  Machine condition: Very good, currently in production Web width and format  Maximum web width: approx. 330 mm  Maximum print width: approx. 322 mm  Format: roll-to-roll Speed and productivity  Maximum printing speed: up to approx. 19.2 m/min  Productivity: up to approx. 1,540 m²/hour (depending on job and coverage) _____ Technical configuration (as visible and confirmed) • Xeikon CX3 digital color printing engine • Integrated unwinder • Integrated rewinder • Roll-to-roll configuration • 5th color unit – White • Additional special colors available: Blue and Orange • Continuous manufacturer service contract in place • Machine currently running in production _____ Electrical data (according to nameplates) • Power supply: 3-phase, 220–240 V / 380–415 V • Frequency: 50 / 60 Hz • CE compliant _____ Included equipment • Unwinding unit • Rewinding unit • Digital front end and control panels • Safety systems and emergency stops • All standard accessories installed on the machine _____ Operational status • Machine is fully functional • Currently in operation • Regularly maintained under manufacturer service agreement _____

Condition: used, This listing is for a Sony UP-D895 Digital Graphic Printer. The unit is in full working condition and is ready for immediate release. Credpfx Aoxxy N Hedroh Sony UP-D895 Digital Graphic Printer The UP-D895 is engineered specifically for medical environments, ensuring high-quality prints of critical imaging studies. Key Features: High-Resolution Printing: Produces sharp and clear images, essential for accurate medical diagnoses, with high detail suitable for radiology. Efficient Printing Technology: Utilizes advanced printing technology that ensures reliable performance, reducing downtime in busy medical facilities. Compact Design: Lightweight and space-saving, making it ideal for crowded radiology departments without compromising on functionality. User-Friendly Interface: Features a front panel with intuitive controls and a jog dial, allowing for easy navigation through menu functions, enhancing operational efficiency. Increased Memory: 10MB memory capacity supports higher throughput, enabling the printer to handle multiple jobs quickly, which is crucial in high-demand environments. “Resize-to-Fit” Feature: This functionality allows for the enlargement of images to fit the desired print size, accommodating various diagnostic needs. Media Compatibility: Compatible with a range of printing media, including UPP-110S, UPP-110HD, and UPP-110HG papers, offering flexibility based on imaging requirements. Ideal Applications: Medical Imaging: Specifically designed for printing X-rays, MRIs, and CT scans, ensuring that medical professionals can review images with high clarity. Radiology Departments: Perfect for use in hospitals and clinics where quick and reliable printing of diagnostic images is essential for patient care.

Condition: good (used), Year of construction: 1995, Gallus R200B Manufacturer: Gallus Ferd. Rüesch AG, Switzerland Model: Gallus R200B Year: 1995 Configuration: 8-Color UV Letterpress Incoterm: FCA (Free Loaded on Truck) FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is of interest The Gallus R200B has earned an outstanding reputation within the label industry thanks to its robust Swiss engineering, exceptional print quality, and long service life. Even today, it remains a highly reliable production press for self-adhesive labels and specialty applications. A particular highlight of this machine is its extensive package of original Gallus tooling, including a large quantity of printing cylinders, anilox rollers, magnetic cylinders, and die-cutting cylinders. This significantly reduces the investment required for a new owner while providing maximum production flexibility from day one. Cedpfsznwqgjx Adrerh _____ Technical Specification • 8 UV Letterpress Printing Units • Approx. 200 mm Web Width • UV Drying System • Automatic Unwinder • Automatic Rewinder • Rotary Die-Cutting Station • Matrix Removal System • Automatic Web Guide • Electronic Register Control • Touch Screen Operator Panel • Gallus Ink Control System • Pneumatic Web Tension Control • Calvatron Corona Treatment System • Complete Electrical Cabinet • Operator Platform _____ Included Tooling & Accessories • Extensive package of Printing Cylinders • Large quantity of Anilox Rollers • Large selection of Magnetic Cylinders • Numerous Rotary Die-Cutting Cylinders • Various Repeat Sizes • Tooling Storage Racks • Spare Tooling • Ink Roller Storage Rack • Electrical Cabinet • Corona Treatment Unit • Operator Platform _____ Main Advantages ✔ Proven Swiss Gallus engineering ✔ 8-color UV letterpress configuration ✔ Excellent print quality for self-adhesive labels ✔ Extensive original tooling package included ✔ Immediate production capability ✔ Reliable mechanical construction with low maintenance costs ✔ Excellent availability of spare parts ✔ Ideal machine for label converters seeking a cost-effective production solution _____

Condition: used, Year of construction: 2011, Printing & Processing Units: Cedpfxjy Rp E Ds Adrerh - 5 x EXL offset printing units (single) - 1 x Flexo printing unit (single) - 1 x EC printing unit on rail - 7 x UV drying stations (GEW HCP) - Corona S-unit - Die-cutting and laminating nip - Laminating unit – unwind / rewind Web Handling - Combination unwind / infeed unit S-1000 - Web cleaning unit (TEKNEK, single) - Web turner unit with backside reading - Combination outfeed / rewind unit S-1000 - Edge trimmer / crush cut unit Registration & Control - Single matrix unit - Double vertical die unit (SD) - Main control unit - Web video powerscope 4000 (motorized) - ELTROMAT key adjustment system Auxiliary Systems - Technotrans water dampening system - Cooling water in / out for cooling rollers (UV system) - Exhaust air connection (max. 70 °C)

Year of construction: 2014, condition: good (used), Machine details Manufacturer: CARTES Model: GT 363 HSD Year: 2014 Machine type: Label finishing / embellishment / converting machine Maximum material width: 360 mm Maximum print / working format: 340 x 320 mm Maximum speed: up to 15,000 cycles/hour Machine layout dimensions: approx. 8,288 mm length x 1,628 mm width/depth x 2,148 mm height Cjdpfszkavdsx Adrorh Status: Machine is still in production until approx. the end of the year Reason for sale: Replacement by a faster machine _____ Configuration The machine is equipped with the following units: • Unwinder • Corona pretreatment • Flat hot foil stamping unit • 2 x transverse flat hot foil units • 1 x longitudinal foil guide • Foil unwinding 1” • Foil rewinding 3” • Flat screen printing unit • UV-Ray UV curing unit • Flat die-cutting unit • Matrix rewinding, 3” / 76 mm core • Edge trimming knives • Backside slitting / backside scoring • Razor blades for longitudinal slitting • 2 x rewinding shafts, 3” _____ Accessories included • 2nd plate for hot foil stamping • 2 plates for embossing / relief stamping _____ Service and condition The machine is currently still in operation and is reported to be in good working condition. A technical service was carried out by a Dortschy technician in October 2024. FGT condition rating: 8/10 ★★★★★☆☆ This rating is based on the year of manufacture, the current production status, the recent service and the overall configuration of the machine. Final condition remains subject to inspection, technical confirmation and video review. _____ Main advantages • Attractive price compared to the original new price of approx. EUR 244,500 • Strong configuration for premium label finishing • Hot foil stamping and embossing capability • Flat screen printing unit for special effects and high-value applications • UV curing system included • Flat die-cutting unit included • Matrix removal, slitting and rewinding included • Still in production • Recent service in October 2024 • Compact and complete finishing solution for label converters

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel Credpfotubz Uox Adroh  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: good (used), Year of construction: 2010, functionality: fully functional, OMET FlexyServo 330 mm Year of manufacture: 2010 Printing process: Servo-driven UV flexo Condition: Used – excellent condition Location: Europe _____ Machine Configuration Credpfx Ajyyn Rwsdrjh • 6 x UV flexo printing units • 6 x GEW UV drying units • Double die-cutting stations • 1 x Gap Master system • Turn bar (web turner) • Sheet-off unit with additional die-cutting station • Suitable for adhesive label production _____ Equipment & Tooling • 6 sets of tooling • 6 anilox rollers • 3 magnetic cylinders (currently in production) _____ Technical Highlights & Advantages This OMET FlexyServo is a modern servo-driven flexo press offering excellent register accuracy and efficient production performance. Key advantages: • Servo technology for high precision and reduced waste • Strong UV drying system (GEW) • Flexible configuration with multiple die-cutting options • Well-maintained machine in excellent condition • Immediate availability with testing possible This machine is ideal for converters looking for a reliable and efficient narrow web solution. _____

Condition: refurbished (used), functionality: fully functional, Heavy duty ball valve pump Bottom ported Capacity: max. 988 LPM Solids handling: max. 22 mm Discharge pressure: max. 8.6 bar Displacement per stroke: 6.81 liter Connection style: 3" 125# ANSI Crsdpfxex Tqaho Adrsh Pipe size: 80 mm

Condition: used, Year of construction: 2003, General technical data: Machine type: Flexographic printing press Web width: 330 mm Number of colors: 6 Equipment & Configuration: • Turning bar • 2 die-cut stations • 2-shaft rewinder Crsdpfx Aoyn Scfedreh • 6 UV IVT lamps • Video camera system • 3 sets of cylinders • 6 anilox rollers • 3 magnetic cylinders

Year of construction: 2018, condition: like new (used), GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating Crjdpjncfukefx Adreh  Cold foil stamping  Labelshifter  Punching length: 609,6mm  Lattice proofing  manual knife box  Automatic Turret  2 x spindle

Condition: new, MGH is Baykal’s Hydraulic Swing-Beam Shearing Machine, engineered for reliable and efficient straight-line cutting of sheet metal. It is ideal for general-purpose shearing applications where simplicity, durability, and low maintenance are essential. MGH series is well-suited for fabrication shops, small-to-medium metal workshops, and industrial manufacturers. Cedpswnalvjfx Adrsrh

Condition: new, HGL is Baykal’s economical and efficient swing-beam shearing machine, designed for light to medium-duty sheet metal cutting. It offers a cost-effective solution for fabricators who need accurate, clean cuts without the complexity or cost of high-end shears. The HGL is particularly suitable for small workshops, maintenance departments, and entry-level metal fabrication operations. Codpfx Adswnal Aorsrh