Used Bbc Slp2 400A for sale (200)

Condition: excellent (used), Possibility of simultaneous welding and plasma cutting. Output power: at 60% 400A/36V, at 100% 310A/32V. Dedpfx Asud Rl Ueqcsch

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures. Dodpfx Aoyga Uteqcech

Year of construction: 2022, condition: new, Height adjustable L manipulator Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT - Potentiometer for the stepless SPEED- adjustment of the faceplate Djdpeh Td Thofx Aqcsch For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Height adjustable rotary tilt table Dsdpoh Tfbzsfx Aqcech Load: 500kg Stroke: 1.015mm, height faceplate min. 345, max. tilt angle 120°. Face plate diameter: 800mm Welding current: 400A Torque face plate: 1.300Nm Total length: 2.365mm Height (housing): 1.030mm The rotary tilt table is controlled by pushbuttons on the machine housing with the following functions: - LIFT arm - Arm LOWERING - Potentiometer for the stepless SPEED- adjustment of the face plate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Condition: refurbished (used), Siemens SIMODRIVE 611 Power Module 400A 6SN1123-1AA00-0KA0 Manufacturer: Siemens Series: SIMODRIVE 611 Type: Power Module Version: Single-axis module Rated current: 400 A Part number: 6SN1123-1AA00-0KA0 Serial number: T-K22036996 Condition: refurbished spare part Date of manufacture: 05.09.2013 Origin: Made in Germany Packaging: Original box Dsdpeyryfpjfx Aqcech

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2250A, Complete Klöckner Möller - Siemens BD2 - 250A busbar system available! Stock 81.25 running meters!!! Type BD2-250A / 250 Amp - 5 pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length 3.25m Price per meter including connectors, end pieces and brackets Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 400A rails available - please inquire!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Dcodpfjrfwngox Aqcoh Are you also looking for a crane system?

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 285 A, welding current at 100% duty cycle: 270 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Kemppi MasterTig MLS 4000 with 3 Months Warranty Steel – Stainless Steel Weldable Refurbished – Serviced – Tested 5-400 AMP Dcjdpfxoyk Tryj Aqcjh 30% ED: 400A 60% ED: 285A 100% ED: 270A 400 Volt Gas-cooled 2/4 Step Pre gas Post gas Up slope Down slope Stick option Including: 8 Meter Welding torch Earth work lead with clamp Gas hose Trolley Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 1989, condition: good (used), machine/vehicle number: 3506, System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Dedpedkdi Eofx Aqcoch Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

Condition: as good as new (ex-display), Year of construction: 2017, Siemens BD2 BD-2 busbar - busbar system Dsdpfxecumxcj Aqcoch Compatible with the Klöckner Möller BD 2 rail including connector, end cap and holder Type BD2 - 400 amp - 5 pole (L1 L2 L3 N PE) Are available : 41.6 running meters (13x 3.2m) 400A rail, almost as good as new 19.2 running meters (6x 3.2m) 630A rail, used (Klöckner Möller) Voltage Ui max. 660V, frequency 16.66 - 60 Hz Tap-off boxes with the following current strengths are also available: 25 - 50 - 125 - 160 - 250A We can offer you a complete system. Prices are per linear meter The dismantling was carried out by a qualified electrician. Busbars are in MINT condition!!!! Please inquire about lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system? Demag KBK systems, column slewing cranes, wall slewing cranes are available multiple times!!!!

Condition: new, Year of construction: 2021, Stihl Lawnmower 53 cm Petrol RM 655.1 VS The STIHL petrol lawnmower RM 655 VS is a true powerhouse, thanks not only to its durable aluminium housing. With its Vario self-propulsion and a cutting width of 53 cm, it is perfectly suited for maintaining large areas. The central 7-stage cutting height adjustment allows you to choose the grass height from 25 to 85 mm. To make work easier from the start, the engine features the ReadyStart system, which ensures reliable starting. While mowing, the engine speed remains constant even when changing pace, and the mono-comfort handlebar ensures easy handling. A key highlight is the blade brake clutch (BBC) of the RM 655 VS, which disengages the mowing deck while the engine is running, so short pauses do not require restarting the mower. The foldable 70-litre grass catcher box with fill level indicator is easy to empty. With this petrol lawnmower, you are choosing a reliable partner for your garden work. Technical Data: • Aluminium housing with side protection strips • Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) • Weight: 50 kg • Grass catcher box volume: 70 l • Displacement: 173 cm³ • Foldable grass catcher with fill level indicator • Comfort handlebar • Low-resistance wheels • Blade brake clutch (BBC) • Engine with easy-start system (ReadyStart) • Engine type: Series HD775 OHV SC • Mulching feature & multi-blade • Rated blade speed: 2800 rpm • Rated power: 2.6 kW / 3.5 HP • Lawn area: up to 2,500 m² • Cutting width: 53 cm • Cutting height: 20-85 mm • Super-soft grip • Uncertainty factor KpA [dB(A)]: 2 dB(A) • Vario wheel drive • Handlebar vibration level ahw: 3.8 m/s² • Vibration uncertainty K: 1.9 m/s² • Central cutting height adjustment The lawnmower is new and unused. It has only been on display and shows minimal storage marks. The mower cannot be shipped via parcel service due to its size and weight. Shipping within Germany (excluding island surcharge) is €79 net. International shipping is also possible, but costs must be specifically requested. We only ship within the EU. No shipping outside the EU. Dcodpfotvf R Ejx Aqcoh You will receive an invoice with VAT shown. Payment only by bank transfer – NO PAYPAL!

Condition: used, Year of construction: 1978, Manufacturer: Pendraulik Model: WRV49 Year : 1978 Type : stirrer / disolver   Atex class : EExe G3 7 Motor : BBC Power : 3,6 KW Rotation: max 1500 rpm   Wall support: manual Previous use: paint Stirring mechanism: dispersing tool Dcodpfex R Ayuox Aqcoh Stirring head diameter: 200 mm Agitation shaft length: 105 mm Up/down travel: 150 mm Speed variation: mechanical

Condition: good (used), NH fuse switch disconnector -400A -Dimensions: 100/660/H240 mm -Weight: 6.3 kg Djdpob S Htgefx Aqcoch

Condition: good (used), High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: internal grinding spindle -Drive motor: BBC 1.5 kW / 2870 rpm Dodoizk Rzopfx Aqcjch -Spindle speed: approx. 9800 rpm -Shaft axis: adjustable max. height 460 mm -Recording/Dimensions: see photos -Total dimensions: 730/400/H535 mm -Weight: 105 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Huss, hydraulic unit with additional hand pump -Pressure: 60 bar -Flow rate: 15 l/min -Engine: BBC 4 kW / 1435 rpm -Hydraulic tank Dodpfjv Rm Abox Aqcjch -Pressure accumulator -Individual components: see photos -Dimensions: 1040/370/H550 mm -Weight: 166 kg

Condition: used, Chroma Type: ATE 17011 Dimensions: W x D x H 600 x 800 x 1760 mm Regenerative Cell Tester (5V/100A x 12 channels) Power supply: 400V/50 Hz 24 KVA Dcodpfx Aewwrn Ueqceh Data Logger (64 channels) 8-Port Sensor Card Module 17212R-5-100 Max 5V / 100A Max channels: 12 (fixed) Parallel operation: 200A, 300A, 400A, 600A, 1200A V Adjustable from 0 mV to 5000 mV * 1, resolution 1 mV A Adjustable from 0.01 A to 100.00 A, resolution 0.01 A Connection: 400V/50Hz, 5 wires 24 kVA Weight: 250 kg Condition: used Scope of supply: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Dcedew Rm Saopfx Aqcjh Remote control connection: yes

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Djdouprqwjpfx Aqcech Connection to 400A 32A Used, functional condition

Condition: good (used), Year of construction: 2018, MACHINE STRUCTURE 2500X12000mm HEXA GV500 NUMERICAL CONTROL HEIGHT CONTROL PLASMA BEVEL HEAD 6-TOOL REVOLVER ISO30 DRILLING MACHINE INCLUDED: HYPERTHERM 400A GENERATOR NEW Dodpfx Aqeq Abwpecsch WARRANTY 6 MONTHS

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Dcodpfx Aqspgmryocoh Are you also looking for a crane system?

Condition: excellent (used), Year of construction: 2005, Year of production: 2005 Control: NX100 Dcjdpstu Trxefx Aqcoh Range: 1378mm Source: 400A

Year of construction: 1987, condition: used, Kehren rotary table type RS 7C, second-hand manufacturer: Kehren, Honneff Comm.: 4179 year of construction: 1987 Control: Siemens 3G SPS: Siemens S5 Dcedpfx Aqehgmwgscsh grinding motor: BBC QUB 200 rotary table ø: 750 mm ø grinding head:460 mm Control panel with screen Coolant system Flushing pump Coolant pump Automatic paper belt filter system Control cabinet

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW1000A, Complete Klöckner Möller - Siemens BD2 - 1000A Busbar System available! Stock: 34 running meters - Price is per meter! Type BD2C-3-1000-SB3 / 1000 Amps - 5-pole - L1 L2 L3 N PE - copper conductors only, no aluminum! Voltage Ui max. 690V, frequency 50 - 60 Hz. Busbar length: 10 x 3.25m, 1 x 2.25m. Price per meter includes connectors, end caps, and brackets. Feeder and tap-off boxes 16-32-63-125-250A are optionally available. Disassembly was carried out by a qualified electrician. Busbars are in top condition! Please inquire about your required lengths or accessories! Dcedpfx Ajw Etmboqcjh Stock item, immediately available! Note: 100A, 160A, 250A, and 400A busbars also in stock – please inquire! ----- Old Klöckner Moeller BD1 system still available! Busbars, corner pieces, feeder units, and tap-off boxes for the old Klöckner Moeller BD1 / BD 1 system in stock! Are you also looking for a crane system?

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, arm reach: 1,300 mm, The perfect package for your welding automation with the very latest UR10e robot series - please do not buy any more CB series. Would you like to automate your welding shop with a cobot to master your future challenges? Then the OH-au2mate Cobot Welding Solutions with Lorch power source is just right for you! The perfectly coordinated package combines Dcsdpfxjt S U Auo Aqcoh - high-quality robot technology from the cobot market leader Universal - innovative welding technology from Lorch - intuitive operating software Exact contents of the package: UR10e robot welding machine, operating elements, torch holder, Translas 8XR extraction torch, Lorch S5 power source with 400A.

Condition: used, Year of construction: 1975, machine/vehicle number: SN: 75.1019, DISAMATIC 2032 A SN: 75.1019 Date of manufacture: 1975 Dimensions: DISAMATIC 2032 A: 8011 x 1600 x 2950mm (length x width x height) Control room: 2400 x 1900 x 2300mm (length x width x height) Weight: ca 32t (without hydraulic oil) Mold dimensions: Height: 600mm Width: 775mm Thickness: min. 150mm / max. 400mm The thickness of molds depends on chamber depth, molding pressure, molding boards, pressure of sand shooting, molding sand properties. Pressure on molds urface: To be set up between 0 and 22kp/cm² Efficiency: 300 molds per hour (coreless/thickness of mold 200mm) Current fficiency: 150 molds per hour Max. unit weight of casting: approx. 40kg net Molding sand consumption: max. 85m³ per hour Air consumption: max. 14m³ per min. Air pressure: min. 6kp/cm² max. 10kp/cm² Electric power system: Power demand: 59.5kW 1) main engine - 37kW 2) servo motor – 7.5kW 3) heating parts – 13kW 4) control system – 2kW Control voltage: 110V AC MOULDING CHAMBER DIMENSIONS Top Plate # 774.8 x 710 x 30mm Side Plate, right # 810 x 710 x 30mm Side Plate, left # Dsdjvyc T Uepfx Aqcoch 810 x 710 x 30mm bottom plate # hardchromed 1-side 2311 x 774.8 x 8mm PMC SYSTEM -PMC cappingstrips Dimensions: Width: 775mm Length: 18m Weight: ca 8t Air consumption: Average consumption: 0.5m³/min Max. consumption: 2.5m³/min ----- Lack of CSE – "QUICK CORE MASK CHANGE" Lack of QPC – "QUICK PATTERN PLATE CHANGING UNIT" ----- Molding machine DISAMATIC 2032 A is integrated with pouring furnace BBC XCQ 44 with capacity 4.4t s inductive furnace is equipped with heated inductor with max. power 120kW and bottom-pour stopwatch. Molding line is connected with knockout grid. We're ready to sell whole molding line, including extra facilities. Machines are in goods hape, mechanically and electrically efficient.

Condition: like new (used), The MULTIMIG F SYN series welding machines feature state-of-the-art technology. Instead of the conventional 50 Hz frequency used in transformers, these welders operate at frequencies ranging from 20 kHz to 50 kHz. This provides the equipment with excellent dynamic response, portability, compact size, low weight, reduced energy consumption, and more. The MULTIMIG F SYN welding machines are suitable for welding various materials such as stainless steel, carbon steel, alloyed steel, etc. Therefore, they can be used in general metalworking industries, machinery and equipment repair, construction, production and repair of installations in the petrochemical industry, DIY workshops, and more. Features of the MULTIMIG F SYN series welders: - Digital control system with accurate welding parameter display - High-performance multifunctional power source (MIG/MAG) - Dynamic control and stable welding parameters - IGBT technology for low energy consumption - Rated duty cycle: MULTIMIG 500F SYN = 500A at 60% (40°C) Specification: - Input voltage (V): 3~380/400/440±10% - Frequency (Hz): 50/60 - Input current (A): MIG 43; TIG 32; MMA 43 - Output power (kW): MIG 23; TIG 18; MMA 23 - Welding current (A): 40-500 (MIG) - Welding voltage (V): 10-50 (MIG) - Open circuit voltage (V): 63 - Duty cycle (40°C): 60% at 500A, 100% at 400A - Wire diameter (mm): Fe: 0.6/0.9/1.0/1.2/1.6; SS: 0.8/0.9/1.0/1.2/1.6; Flux-cored: 0.6/0.8/0.9/1.0/1.2/1.6 - Protection class: IP23 - Insulation class: H - Dimensions (mm): 605x240x445 - Weight (kg): 31.5 - Power factor: 0.7 Includes cooler, trolley, torch, and ground cable. Set includes: 500F SYN power source, cooler, trolley, power supply box, MB 500 4m water-cooled torch, and ground cable. Dcedsxfln Ujpfx Aqcsh Net price: 9,500 Gross price: 11,685