Used Bito / Segmentlänge: 2.460 Mm Segmentbreite: 38 Mm for sale (74,480)

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. Pgjdpfx Abowc Nrnezep The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking. Pjdpfezkmi Dex Abzjgp

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -External dimensions: 400/300/H220 mm -Interior dimensions: 340/268/H200 mm -Quantity: 144 pieces of boxes available -Piece: 6 euros net from stock -Minimum order quantity: 5 pcs -for larger purchases: price on request -Own weight: 1.5 kg/piece Pedpfx Abev T I D Sozsgp

Condition: used, 🧰 Product Features • Material: High-quality polypropylene (PP) • Color: black • Volume: 20 liters • External dimensions: 400 × 300 × 215 mm • Internal dimensions: 360 × 260 × 211 mm • Load capacity: 40 kg • Temperature resistance: -20°C to +80°C • Weight: 1.07 kg • Stacking load: 150 kg • Container perfectly adapted to European dimensions • Stackable 💰 Price € 9,- net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: Pedpfxewz Rhhe Abzjgp • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel mezzanine platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks, or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough cleaning upon handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Splash guard Diameter 390 mm Wheel offset 6 Bolt circle diameter 135 mm Pgjdpefm Tqzefx Abzjp Weight 56 kg

Year of construction: 2000, condition: excellent (used), Splash guard Diameter 400 mm Taper 105 mm Bolt circle 135 Psdpsd Tyu Refx Abzogp Estimated age

Condition: good (used), Grinding wheel Diameter 500 mm Pgsdscx N Atspfx Abzjp 475 rpm.

Year of construction: 2011, condition: excellent (used), Lathe chuck Diameter 330 mm Height 100 mm Peded Na Spopfx Abzogp Weight 57 kg Year of manufacture is estimated.

Condition: used, Mounting block 2 available 1230 x 1230 mm Height 560 mm Pedpfxoc Rmpuj Abzegp Distance between holes 60 mm

Year of construction: 2010, condition: excellent (used), Splash guard 24830 Diameter 500 mm Height 115 mm Taper 120 mm Pgjdpfx Ajd Tyu Eebzop Estimated age

Condition: excellent (used), Splash plate Diameter: 500 mm Weight: 68 kg Pgedpfx Abjfm Tqrozjp Bolt circle diameter: 134 mm Center bore diameter: 96 mm

Condition: excellent (used), Taper shank chuck (28319) Diameter 290 mm Cylindrical shank 78 mm Taper 6 mm Pgedpfeiuvumex Abzsp Weight 54 kg

Condition: excellent (used), For sale is a Schimanek Type 70 manual bookbinding guillotine, manufactured in West Germany. This is a robust machine designed for the precise cutting of paper, cardboard, and other bookbinding materials. Podjziwnhopfx Abzegp The device is equipped with a long cutting arm that provides high cutting force, an adjustable back gauge with a scale, and a stable worktable. The massive construction guarantees accuracy and long-term durability. Technical specifications: Manufacturer: Schimanek Model: Type 70 Serial number: 24256 Country of manufacture: West Germany Type: manual bookbinding guillotine Maximum cutting width: approx. 700 mm Adjustable back gauge with scale Manual material clamping Robust metal construction Condition: used Applications: paper cutting, cardboard cutting, corrugated board cutting, bookbinding work, printing houses, graphic design studios. The machine is sold in the condition shown in the pictures.

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Pedpfxsziwnbj Abzsgp Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers.

Condition: good (used), Die block, W x H approx. 3500 x 260 x 190 mm, Pedpfxszh D Dye Abzjgp . Total length = 3500 mm Length of the reducers = 2600 mm . V-groove, without reducers, opening width approx. 100 mm V-groove, with reducers, opening width approx. 150 mm, H = 220 mm . .

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 6,500 mm, 1x Pallet flow rack by Bito, fully functional. Capacity for 96 pallet positions. Year of manufacture: 2021. Basic dimensions: W 10.20 m - D 5.20 m - H 6.50 m. Pallet weight min: 250 kg, max: 1000 kg. Channel width / beam length: 2400 mm. The floor-level roller tracks are foldable for flexible cleaning access underneath (see picture no. 4). Pgodew Az Emspfx Abzjp Inspected and serviced annually. The system is already dismantled and in storage. Europe-wide shipping available for an extra charge.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes Pgjdey Tvphopfx Abzsp * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: used, Year of construction: 2020, operating hours: 2,652 h, Equipment: all wheel drive, YANMAR VIO38-6 Excavator Type: VIO38-6 Engine: 18.5 kW Operating weight: 3,695 kg Year of manufacture: 2020 Color: Yellow Transport length: 5.32 m Transport width: 1.74 m Transport height: 2.47 m We are also happy to assist you with financing or leasing through our partners. All information is provided without guarantee. Subject to errors and prior sale. Pgedsy Hyqpjpfx Abzjp

Condition: good (used), Year of construction: 2022, Pallet flow rack / or flow rack for pallets 1m x 1.20m, max. 350kg, 90 – to 108 spaces – used: Price ex works: now only €25,000 instead of €35,000 (net), including disassembly etc.! Manufacturer: Bito Type: PDS flow rack system Year of manufacture: June 2022 Container: Wooden pallet: 1000x1200mm CP1 pallet: 1000x1200mm Storage: lengthwise Height including pallet: max. 1850mm Pallet weight: min. 150kg / max. 350kg Depth of the racks: 17.76m Width: 2.73m Frame height: rear: 7,085mm, front: 6,005mm Roller track width: approx. 1,072mm 2 bays side by side 3 levels per channel 4% incline Pgodpfxozd T Sls Abzsp Condition: very good Available: immediately Location: D-59227 Ahlen-Vorhelm Plan available as a PDF – we will gladly send it upon request!

Condition: new, Press brake tool of big gooseneck punch for LVD H380mmxW190mmXL125mm segmented Pgjdpfx Abjiimv Nezjp

Condition: new, V13.5mm for 1-2.5mm bending Pedpfxsldc U Re Abzegp V38mm for 3-6mm bending

Condition: excellent (used), IVA Engineering Type: M5386 Environmental and Stability Chamber Dry Hot Air Test Chamber Nominal voltage: 415V AC/20A Pgsdpfx Aszdr E Rebzep Dimensions: 90.55 x 78.74 x 90.55 in - 2204.60 lb 2300 x 2000 x 2300 mm - 1000 kg Internal dimensions: (Height x Width x Depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Features: * Used pallet roller conveyor from the manufacturer Bito * Condition: used * Color: galvanized * Professionally disassembled and packaged * Stock quantity: approx. 14 meters * Price per meter Technical data Pgsdpsfw Nfzjfx Abzjp System consists of 7 segments 7 x segments x approx. 2,000 mm long Overall width: approx. 880 mm Roller width: approx. 855 mm Conveyor width: approx. 870 mm Axle spacing: approx. 70 to 95 mm Roller cross-section: 60 mm Material: steel/galvanized Frame height: approx. 110 mm Each segment has 2 to 4 braking rollers. Roller diameter: 80 mm Pallet roller conveyor Thanks to the excellent workmanship of the pallet roller conveyor, your material will glide smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: good (used), functionality: fully functional, roll diameter: 60 mm, roll width: 855 mm, total width: 880 mm, total length: 525,000 mm, conveying length: 525,000 mm, axle spacing: 145 mm, frame height: 80 mm, Pallet conveyor/roller conveyor approx. 525 meters Manufacturer: BITO Condition: Used Color: Galvanized Stock: approx. 525 meters Overall width: approx. 880 mm Roller width: approx. 855 mm Guide width: approx. 855 mm Axle spacing: approx. 145 mm Roller cross-section: approx. 60 mm Roller diameter: approx. 80 mm Material: Steel (galvanized) Frame height: approx. 80 mm System consists of 213 segments: 28 segments: approx. 2110 mm length 14 segments: approx. 2130 mm length 12 segments: approx. 2350 mm length 7 segments: approx. 2490 mm length 9 segments: approx. 2710 mm length 30 segments: approx. 2830 mm length 58 segments: approx. 2850 mm length 38 segments: approx. 3025 mm length Pjdouh Tbmspfx Abzogp 1 to 2 braking rollers per segment Price net per meter Feet to be ordered separately Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally dismantled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The conveying system was in operation until it was dismantled. Due to the excellent workmanship of the conveying system, your material glides smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on the design or assembly. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Condition: good (used), functionality: fully functional, roll diameter: 60 mm, roll width: 855 mm, total width: 880 mm, total length: 2,120 mm, conveying length: 2,120 mm, axle spacing: 125 mm, frame height: 80 mm, Pallet feed element/ pallet roller conveyor Manufacturer: BITO Condition: Used Model/Type: Rollers Total length: approx. 2120 mm Total width: approx. 880 mm Conveyor width/ roller width: approx. 855 mm Roller diameter: approx. 60 mm Center distance: approx. 125/145 mm Frame: Steel/ Galvanized Frame height: approx. 80 mm Pgedpfx Absuh Tf Eozsp Including one brake roller per piece (diameter: approx. 80 mm) Stock: 6 pieces Price per piece Feet to be ordered separately Feet to be ordered separately Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology has run until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as picking racks or containers.