Used Bitzer Csh8561-125 for sale (3,666)

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm Ijdpfxsvut D Te Anwoau table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Iasdpfx Aney Ra Ddewsu Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Condition: good (used), Swing over bed 270 mm Center Height 125 mm Distance between centers 600 mm Spindle speeds 30-5000 rpm Iodpjtwpyaofx Anwoau Control: FANUC 18i Manual Guide Misc. accessories MARCELS MASCHINEN CH

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive Isdey N D E Aspfx Anwoau 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: excellent (used), Year of construction: 2008, Used CNC machining center Iaedpsy Nzw Nefx Anweu Manufacturer: IMA Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table 8 supports in X, manually adjustable, 3 vacuum cups per console, vacuum pump 90 m³/h vacuum connection for templates LED display for vacuum cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm (milling/drilling), Working area Z: 12 – 125 mm (clearance 150 mm) Additional central stop row 14 vertical drilling spindles + 6 horizontal horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 7.5 kW up to 18,000 rpm with C-axis 360° interpolation, liquid circulation cooling – 18-position tool changer mounted on the Y-support Edge banding unit VT 100, four-sided/all-around – rotation range 740 degrees with 2-position roller magazine, automatic granule feed Adapter units: – fixed saw 90° – 4-spindle angle head Control ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDE and production list software Safety fence on right side and foot mats at front; Rear: requires wall installation or separate safeguarding

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-617, Technical data: Iajdpsty Swtofx Anwju 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel ST chain hoist 125Kg Payload at full radius 125KG / 0.125to payload Outreach: approx. 2m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1989, condition: good (used), machine/vehicle number: MBUT133-644, Technical data: Iajdoty Swyjpfx Anwsu 1x Demag KBK 1 wall-mounted slewing jib crane NL 125KG with steel chain hoist 125Kg Payload at full radius 125KG / 0,125to payload Outreach: approx. 3m Weight complete approx. 150Kg incl. wall bracket incl. bolts, cable drag, trolley, end cap etc. incl. steel chain hoist NL 125Kg Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Isdpfxjct Dhae Anweau Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Condition: new, plate thickness 1,25 mm roll-body distance 250 mm throat 260 mm distance between roll centers 62 mm tool adaptor 26 mm speed 6,3 m/min total power requirement 0,7 kW Ijdpeyvvrujfx Anwoau weight 170 kg range L-W-H 1020x600x1500 mm Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: used, We are offering used crossbeams for sale. TECHNICAL DATA Clear span: 3,600 mm Box section: 125 x 50 mm – Load capacity per pair of beams: 3,700 kg Box section: 130 x 50 mm – Load capacity per pair of beams: 3,800 kg Colour: Narcissus yellow Condition: Used PRICING €25.00 net per unit €29.75 gross per unit TIERED PRICING per unit – Stock: 2,000 units 1 – 50 units: €25.00 net 51 – 100 units: €24.00 net 101 – 250 units: €23.00 net From 251 units: €22.00 net Iasdpfx Aey H D Eksnwsu PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailor-made quotation. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. Prices are per unit/net price unless otherwise specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for trade, industry, and craft businesses. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us if you have any questions. Four wins – The building blocks of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019 Ijdpfsv U R Agsx Anwsau

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Ijdpjy H Akrofx Anwoau Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0443848, center height: 625 mm, center width: 8,000 mm, spindle speed (max.): 355 rpm, bed width: 800 mm, TECHNICAL DETAILS Swing diameter over bed: 1,250 mm Swing diameter over slide: 1,100 mm Center height: 625 mm Distance between centers: 8,000 mm Bed width: 800 mm Spindle bore: 1,100 mm Spindle speed range: 1.8 - 355 rpm MACHINE DETAILS Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 10,730 x 1,600 x 2,400 mm Unladen weight: 12,000 kg Transport packages: 3 EQUIPMENT Fixed steady rest Four-jaw chuck Three-jaw chuck Iaedsy Hit Hjpfx Anwsu

Condition: used, Year of construction: 1994, machine/vehicle number: 884019, functionality: fully functional, power: 15 kW (20.39 HP), total length: 3,600 mm, total width: 2,300 mm, total height: 2,800 mm, overall weight: 8,800 kg, TRUMPF Trumabend 125/3 Year of manufacture: 1994 Control: CNC (DA58) Country of origin: Austria Press force 125 t Bending length 3050 mm Frame gap 2550 mm Total power requirement 15 kW Throat depth 350 mm Approach speed 130 mm/sec Working speed 1–10 m/min Return speed 100 mm/sec Backgauge – adjustable 1000 mm Stroke 200 mm Isdpfxsy Iydlo Anwjau Installation height 400 mm Press capacity 280 bar Space requirement approx. 3.6 x 2.3 x 2.8 m Machine weight approx. 8.8 t Control CNC Control system DA58

Condition: used, Manufacturer: Grundfos -type: LP 80 125/124 B-F-A-RUUV -model: 48/62941-P1-0250 -volume flow: 50m3/h -lifting height: 15.5m -operating pressure: 16 bar -operating temperature: 80°c -stem size: DN80 Ijdpoy R Edcefx Anwjau

Condition: ready for operation (used), Column Jib Crane, Swing Crane, 80 kg Crane, Used Machine Load Capacity: 125 kg Iedpfx Ajv R Du Uonwjau Column Height: 3800 mm Jib Length / Reach: 1650 mm Chain Hoist: Demag PMV5-V2F6 Load Capacity: 80 kg Electrical Data: 400 V; 0.3 kW; 1.5 A

Condition: ready for operation (used), Column crane, jib crane, 80 kg crane, used machine Load capacity: 125/80 kg Iaedpfswfrgasx Anwou Column height: 3200 mm Jib arm length / outreach: 1700 mm Chain hoist: Demag PMV5-V2F6 Electrical data: 400 V; 0.05 kW; 1.5 A

Condition: ready for operation (used), Year of construction: 2004, Centrifugal pump, pump, KSB Etanorm mx 125-250 NA, Used machine Overall dimensions :1690 x 780 x 1000 mm Weight: 1000 kg Iodpfx Aneuhl R Hewoau Manufacturer:KSB Type:Etanorm mx 125-250 NA Year of manufacture: 2004 Electrical data: 400 V; 50 HZ; 2980 rpm; 110 kw; 190 A Lifting height: 75,5 m Pump capacity: 5920 L/min

Condition: ready for operation (used), functionality: fully functional, ROMEC PRESS BRAKE 4000 X 125 TON Iodjy Nc Ivopfx Anwjau DISPLAY ON 2 AXES MOTORIZED BACKGAUGE USED MACHINE INTERNAL CODE SVR 136

Condition: used, Year of construction: 1999, This Busch SWH 125, manufactured in 1999, is a robust and reliable stacking unit currently located in Germany and actively in use within a printshop environment. With a solid build and dimensions of 800 x 1200 mm, it offers dependable performance for industrial stacking operations. The unit is in good condition, showing no signs of damage, and is designed to accommodate a wide range of stacking needs. It features a generous platform width of 1250 mm, allowing for efficient handling of various materials. The stacking height is adjustable, with a maximum of 1350 mm and a minimum of 650 mm, providing flexibility for different production requirements. This machine, bearing serial number 409/851, reflects Busch???s commitment to engineering excellence and durability. It remains a practical choice for operations seeking consistent stacking performance in a professional setting. Format: 800 x 1200 mm Equipment: Good condition without any damage Maximum stacking height: 1350 mm Isdpoxpw Etsfx Anwsau Minimum stacking height: 650 mm Platform width: 1250 mm

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 700 kg, input frequency: 50 Hz, electrical fuse: 16 A, Lifting Kneader Kemper F 125 A Lifting kneader with removable bowl Dough mixer with flour dust cover Iedpfx Aey H Utfenwsau With safety circuit DGUV V3 tested Connection: 400V, 16A CEE plug Used machine We have many more lifting kneaders in stock!

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe Iedey Hrn Hopfx Anwoau - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Year of construction: 1990, condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Iajdegy Hzpepfx Anwju Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend

Condition: excellent (used), Year of construction: 1983, Faceplate diameter 1250 mm Max. turning diameter 1400 mm Max. turning height 1160 mm Max. ram stroke, vertical / horizontal 755 / 840 mm Table load capacity unlimited Faceplate speed range 5.6 - 300 rpm Vertical slide swiveling adjustment 45° Feed range 0.044-8 mm/rev Rapid traverse 2 m/min Space requirement L x W x H 2660 x 2710 x 3950 mm Total weight 16,500 kg Accessories / Special features: • 2-axis digital display, manufacturer ACU-Rite • Faceplate Ø 1250 mm with 4 chuck jaws • 5-position turret • Taper turning • Copy turning Siegfried Volz Werkzeugmaschinen Iodpfx Ansy Ex Epowoau Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2006, condition: used, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Connection: 400V 16A Good condition, see pictures Ijdpjy Hf Itjfx Anwsau Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only