Used Bluetech Thread Cutting Machine for sale (67,201)

Year of construction: 1985, condition: refurbished (used), Dimeter range- 4-10mm Cutting lenght - 2,0 m ,(possibly longer) Dedpedt Arlofx Aktokn Speed -90 m/min. Reconstruction- 2018 Control - PLC Siemens Double mechanic pay off wire

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Dkjdpfx Akjtndgpjten

Year of construction: 1998, condition: excellent (used), Technical detils : Dkjdpfx Ash Hp H Ssktjn - Capacity - 500 nails/ min. - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm - Year - 1998

Year of construction: 1997, condition: refurbished (used), Technical Details : - Speed - 90 m/min. - Power - 20 Kw - two engines - Recondition - 2018 - Run out table - 6 m - Wire Range - 2- 12 mm Djdpfxsdz S Tvj Aktokn - Cut unit - flying knives

Year of construction: 1980, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-14mm Cutting lenght - 8,5m Dkjdpfshqfl Aox Akton Speed -70 m/min. Reconstruction- 2022

Year of construction: 1979, condition: used, Dimeter range- 3-10mm Dksdpfx Ascv A I Nekten Cutting lenght -4m ,(possibly longer) Speed -90 m/min. Reconstruction- 2016 Control - PLC

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Dkjdpfx Akofkmr Setjn Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Dksdpfxoh In Thj Aktsn Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Year of construction: 1985, condition: used, Wire range - 2 - 6 mm Dkedpfxsdqubqo Aktsn Run out table - 1 m ( can be longer ) Speed - max. 90 /min. El. Power - 8 kw Automatic wire pay of - max. 800 kg Machine is in very good condition and restored in 2017

Condition: excellent (used), Year of construction: 2020, operating hours: 860 h, functionality: fully functional, machine/vehicle number: 2426201745, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, table length: 3,000 mm, working width: 2,000 mm, Equipment: documentation/manual, ZINSER 2426 CNC plasma cutting machine with Hypertherm XPR170 VWI Year of manufacture 2020 – Very good condition – including programming software For sale is a well-maintained and little-used CNC plasma cutting machine, type ZINSER 2426, with a Hypertherm XPR170 plasma source. The machine is in very good technical and optical condition and has only been used in our own operations. It is immediately ready for use and can be inspected and demonstrated under power after prior arrangement. Technical data: Manufacturer: ZINSER Type: 2426 Year of manufacture: 2020 Control system: ZINSER CNC 5010 Plasma source: Hypertherm XPR170 with VWI technology Cutting table: 3,000 × 2,000 mm Travel range, longitudinal axis: approx. 4,000 mm Side arm on the right Preparation for the integration of a pipe rotating unit CNC-controlled height control Programming software / nesting software included Special features: The combination of the ZINSER machine and the Hypertherm XPR170 enables precise and economical cutting operations in mild steel, stainless steel, and aluminum. The modern XPR technology ensures excellent cut quality and high process reliability. Another advantage is the existing preparation for a pipe rotating unit, which means that the machine can be easily expanded if required. Scope of supply: ZINSER 2426 CNC plasma cutting machine Hypertherm XPR170 plasma source ZINSER CNC 5010 control system Dkedpfx Akeza Eufsten Programming software / nesting software Documentation and manuals Not included in the scope of supply: Extraction system. Location: Austria Inspection and test cut possible after prior arrangement. Disassembly and transport are to be organized by the buyer.

Condition: good (used), Year of construction: 2014, 1 x cutting drum Manufacturer: FERAG Model: SNT-50 Year of manufacture: 2014 Condition: good, in production until disassembly Other used FERAG components, such as infeed and outfeed stations (including newer models) and SDB systems, are available. Just inquire! Dkodpfsy Udadox Akten

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Manufacturer: Adige Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Cutting length: 2100 mm Dkedpsy Ayc Defx Aktjn Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Condition: used, In very good condition Cutting machine Wohlenberg CUT-Tec 92 Schneidmaschine / Cutting machine Wohlenberg CUT-Tec 92 Year 2002 - Serial-No. 3810-001 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Display / Program - Display Dodpfxoy U U Skj Aktjkn Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition   Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. Dkjdpev Hm A Tofx Aktjn No manual adjustment is required.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Dkedpfx Aoy Urzioktjn Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Dksdpfozaz S Hsx Akten Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is the automated cutting system for professionals who demand speed, accuracy, and efficiency. Equipped with premium Morso guillotine blades, it delivers perfect 45° corners in wood, plastic, and MDF—consistently, every time. With a capacity of over 500 frames per hour, you can significantly increase your production output. At the same time, you drastically reduce material waste: just 1 mm cutting loss per cut, compared to up to 6 mm with conventional saws. Smart automation features include: Dsdpfsw U D E Esx Aktekn Automatic loader handling up to 13 lengths Precision clamping system for maximum stability Integrated splitter to sort cut pieces and remove waste automatically Full control via a Mitsubishi touchscreen and PLC system, combined with reliable SMC pneumatics. The result: higher output, lower waste, and consistent premium quality—exactly what your production line needs.

Condition: good (used), functionality: fully functional, power: 11.03 kW (15.00 HP), 3000 mm cutting length – separating cut – blade diameter 500 mm – cutting height 170 mm Dkjdpfx Aoy U Dubektsn

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, I am offering this ready-to-use DMS digital card cutter, Series 3, with extended stacking table, card cutting machine/multi-finishing capabilities, perforating and scoring functions, manufactured in 2024. Original price: €12,900. Counter reading: only 5,900 sheets. Sheet stack feeder with compressed air and double sheet detection up to format 33x67 cm. Programmable cuts. Programmable scoring or perforation. 2 double knives with 8mm strip cut, 2 side knives. Fast knife adjustment system, only 1 minute setup time. Long stacking table with motorized automatic shingle delivery. Dodpfx Ajy Ufnpoktjkn Selling price: €6,720 + VAT, collection only. Location: 63450 Hanau (near Frankfurt/Main), Germany. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8741122, cutting width (max.): 1,370 mm, Equipment: documentation/manual, safety light barrier, 1 Polar Mohr cutting machine Type: N 137 AT HD Machine No.: 8741122 Year of manufacture: 2017 1 Schneider Senator vibrating table Type: 1078 Machine No.: 212.554 Djdpfx Aezavw Doktekn 1 Polar destacking/transfer system (Abstapler-Transomat) Model: 1ER130-4 Machine No. 7993101 Year of manufacture: 2009

Condition: excellent (used), cutting width (max.): 76 mm, Cutting width: 76 cm Electronic control with program memory (model SD-P) Hydraulic clamp Safety light barriers Dedpfjxtwxnjx Aktskn Solid, stable construction Full set of tools and documentation

Condition: excellent (used), Year of construction: 2003, Technical data: Cutting width: 115 cm Electronic control Hydraulic clamp Safety light barriers Solid and stable construction Complete set of tools and documentation Dodpoxtwyfofx Aktjkn

Condition: excellent (used), Year of construction: 2007, cutting width (max.): 92 mm, Equipment: safety light barrier, Wohlenberg Protez 92 Air table Photoelectric sensors Spare knife Clamps (Schplaty) Manual Dkedpfowzyc Iex Aktjn

Condition: excellent (used), Index cutting machine Working size: 440 x 100 Dedpfjhbwbpjx Aktskn

Condition: excellent (used), Year of construction: 2006, Year 2006 Cutting width 72 cm Spare knife Djdpfjv H Eyqex Aktskn Air table