Used Bluetech Thread Cutting Machine for sale (66,453)

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Bwodpfjhwrgtsx Aggen Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Bsdshwhfqopfx Aggswn Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Bodpohv Hkasfx Aggjwn Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED to 230k!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Bwodpfx Ajyui Ekeggsn Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Bsdpfx Aex Ddagoggewn Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Bsdpfxowb D S Hj Aggjwn Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 41,124 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC035, laser hours: 12,753 h, laser power: 3,500 W, pipe diameter (max.): 240 mm, pipe length (max.): 12,500 mm, workpiece weight (max.): 400 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, 🔷 2016 BLM Adige LT8.10 CNC Tube Laser – 3.5kW CO₂ | 3D Tilt Head | 12.5m Load | Siemens Control Used 2016 BLM LT8.10 CNC tube laser for sale. 3.5kW CO2, Siemens control, 3D cutting head, 12.5m loader. Fully equipped with chiller & extraction. 💡 High Performance 3D Tube Laser Cutting System – Fully Automated 2016 BLM Adige LT8.10 CNC Tube Laser, a premium 3D tube laser cutting machine designed for high precision, flexibility, and productivity across a wide range of tube and profile cutting applications. The LT8.10 is one of the most versatile machines in its class, capable of processing round, square, rectangular, and structural profiles (I-beams, channels, etc.) with high accuracy and repeatability. 🔧 Machine Details Manufacturer: BLM Group (Adige) Model: LT8.10 Year: 11/2016 Type: CNC Tube Laser Cutting Machine Laser Type: CO₂ Laser Source: Rofin DC035 (3.5 kW) Control: Siemens CNC ⚙️ Key Features 3D Laser Cutting Head with Tilt Capability (±45°) High precision angular / bevel cutting Fully automatic tube processing Designed for high productivity and flexibility Automatic parameter adjustments for optimal cutting performance Capable of cutting complex geometries and joints 📏 Tube & Profile Capacity Round Tube Diameter: Ø12 – 240 mm Square Tube: up to 200 x 200 mm Max Bar Length: 12,500 mm (12.5m infeed) Unloading Length: 8,500 mm Max Linear Weight: 40 kg/m Bwedpoy Ir Euofx Aggon Max Total Bar Weight: 400 kg ✔ Processes: Round, square & rectangular tube Flat oval & special profiles Structural sections (I-beam, U-channel, angle, etc.) ⚡ Laser & Cutting Capabilities Laser Power: 3.5 kW CO₂ (Rofin DC035) 3D Bevel Cutting: Yes (tilting head) Automatic Focus & Adjustment Systems High quality edge finish Ideal for weld prep & complex fabrication work 🧠 CNC & Software Siemens CNC Control System User-friendly interface Full program control and automation High precision motion control for complex cutting operations 🔄 Loading & Handling System Automatic Tube Loading System Infeed Length: 12.5 metres Outfeed Length: 8.5 metres Automatic tube positioning & rotation Multi-position unloading capability ❄️ Supporting Equipment Included Chiller: Cosmotec WLAD842207ZAS0 Extraction Unit: Donaldson Torit DCE 2DFP4-SPRK Full integrated system ready for production 🧱 Machine Overview The LT8.10 is designed to deliver high precision without compromising productivity, making it ideal for both high-volume production and complex custom fabrication. Its rigid structure, automatic handling systems, and 3D cutting capability make it a top-tier solution for: Steel fabrication Structural engineering Tube processing companies Automotive & industrial manufacturing 💰 Why This Machine? Proven BLM Group reliability High-end 3D tube laser capability Handles large diameter tubes (up to 240 mm) Fully automated system → low labour cost Complete package with chiller & extraction Excellent value compared to new Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7411231, Size 92 cm, Program, Spare knife, big side tables Machine no: 7411231 Bwsdpfxownqwco Aggjn

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Bsdpfx Aou Tg Speggewn Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 7711206, • Model: Polar 92 X Bwjdpfxexzzzco Aggsn • Type: Cutting machine / Guillotine • Year of manufacture: 2007 • Format: 920 × 920 mm • Equipment: Digital program, photocells, air table on the right and left • Condition: Standard machine • Suitable for precise cutting operations in post-press finishing

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 858799A, Manufacturer: Ruiyang Printing Machinery Co., Ltd., China Model: MH-1650 Machine Category: Die Cutting & Creasing Machine Machine Type: Automatic Large Format Die Cutter Year of Manufacture: 2014 Serial Number: 858799A Technical Specifications: - Max. Sheet Size: 1650 x 1210 mm Bwsdew Rb Ipepfx Aggjn - Min. Sheet Size: 650 x 550 mm - Max. Die Cutting Size: 1620 x 1190 mm - Speed: up to 3,200 sheets/hour - Power Supply: 380 V, 50 Hz, 3 phases Features: - Automatic feeder with suction head - Large format pile delivery - Heavy-duty design for carton and corrugated board - Control panel with management and safety functions - Suitable for large format packaging production

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines Bedpfex Hxq Isx Aggewn – Robust, industrial-grade design • Typical Industries: Print finishing, bookbinding, printing houses

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Tapping chuck: Quick-change tapping chuck, without collets -Recording: MK5 -Bore: Ø 62 mm -Dimensions: Ø140 x 385 mm Bwedpfx Ageza Tlljgjn -Weight: 15.8 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Manufacturer: Edalco, Thread cutting attachment with slip clutch -Type: Edalmatic EDM-R 1030 -Thread cutting sizes: M10 - M30 -Integrated reversing gearbox: with rapid return -Recording: MK5 -Tap chuck: Ø 22 mm -Dimensions: Ø 123 x 475 mm -Weight: 9 kg Bwsdpfx Agsza Tgcegsn

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 16 mm, overall weight: 4,500 kg, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, warranty duration: 60 months, Bodor P-Series Sheet Metal Laser Cutting Machine – High-Precision Laser Technology for Maximum Efficiency Bodpfx Agsv S Elqogjwn Bodor's P-Series sheet metal laser cutting machines represent state-of-the-art laser technology, high levels of automation, and maximum safety. Designed for demanding cutting processes, the P-Series combines innovative features with outstanding performance to increase efficiency and productivity in sheet metal processing. The Bodor P-Series sets new standards in sheet metal processing. With sophisticated automation features, intelligent safety mechanisms, and precise cutting technologies, it offers a first-class solution for companies that value quality, efficiency, and productivity. Contact us for more information or a demonstration of this innovative laser cutting machine! Laser Type: Fiber Laser Positioning Accuracy: +/- 0.05 mm Repeat Accuracy: +/- 0.03 mm Warranty Period: 5 Years Safety Light Barrier: Yes Documentation: Yes Cooling Unit: Yes Extraction System: Yes

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, total length: 5,560 mm, total width: 2,270 mm, total height: 2,520 mm, warranty duration: 60 months, The i-Series from Bodor Laser offers compact fiber laser metal cutting machines with a fully enclosed safety design, ensuring maximum safety and efficiency. Thanks to their small footprint, they are ideal for operations with limited space. The enclosed housing protects the operator from laser radiation and reduces emissions, contributing to a safe working environment. With advanced laser technology, the i-Series machines enable precise and fast cutting of various metal materials. They are the optimal solution for companies seeking space-saving, safe, and powerful cutting technology. Fiber laser: Working area: 3048 mm x 1524 mm Max. workpiece weight: 1000 kg Max. acceleration: 1.5 g Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.03 mm Warranty period: 5 years Safety light barrier: Yes Documentation: Yes Cooling unit: Yes Bwedov S Ewyepfx Aggen Extraction system: Yes

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 18 mm, overall weight: 6,000 kg, total length: 12,900 mm, total width: 2,370 mm, total height: 2,650 mm, The T-Series from Bodor Laser offers state-of-the-art tube laser cutting machines designed for precise and efficient processing of a wide variety of tube types and sizes. Equipped with extensive features, these machines can handle virtually all tube processing requirements and enable high productivity while maintaining excellent cut quality. The T-Series is therefore the ideal solution for companies looking for reliable and powerful tube cutting technology. Max. diameter of round tube: 8-230mm Max. diameter of square tube: 8-230mm I-beam: 100-140mm Bwsdpfxjv S Ew Ho Aggjn Max. raw material length: 6500mm Positioning accuracy: +/- 0.05mm Repeatability: +/- 0.03mm Warranty period: 5 years Safety light barrier: Yes Documentation: Yes Cooling unit: Yes Extraction system: Yes

Condition: good (used), functionality: fully functional, cutting width (max.): 132 mm, Equipment: documentation/manual, Paper cutting machine for sale. Brand: Perfecta Seypa 132. Equipped with Gergek computer control system, type six plus, and safety sensors from Sick. Includes an air table. Comes with 3 extra knives and all manuals. Bsdpfx Agezar Avsgswn You are welcome to test this machine at our location. We can arrange transport and packaging and load it into a truck or container for you. Please inquire for a price including transport (location within the Netherlands). Best regards, Henk Hoos.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. Bjdpfxex Rn Tme Aggewn IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed and fly cutting movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: ( up till 20 mm thickness steel ) • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, cutting width (max.): 920 mm, cutting length (max.): 920 mm, Equipment: documentation/manual, safety light barrier, New oil change for hydraulics and gearbox performed. New color display with software update. Cutting counter shows approximately 871,000 cuts. - ED program control - Light barrier - Air table - Folding rear table cover - Operating manual (copy) - Spare blades - Accessories for blade changes Bwodjzbiwyjpfx Aggjn The machine is available immediately from stock. Testing and inspection can be arranged in advance.

Condition: used, Punching machine for, e.g., slipcases with many punching dies Bedpexw N Ntjfx Aggjwn

Condition: good (used), Year of construction: 1975, cutting width (max.): 1,070 mm, cutting length (max.): 1,070 mm, overall weight: 4,500 kg, front table length: 600 mm, total width: 1,600 mm, total height: 1,500 mm, total length: 2,200 mm, Paper cutting machine, stack cutting machine, good condition Bwodpfx Agstwy D Ajgsn

Condition: used, VALLÉS DE FANTASIES MD-83 FANCY YARN WINDING MACHINE Industrial fancy yarn winding machine manufactured by Vallés de Fantasies (Sabadell, Catalonia, Spain), model MD-83. Obtained from an industrial company liquidation in Spain. ═════ SPECIFICATIONS ═════ - Manufacturer: Vallés de Fantasies (Spain, active manufacturer) - Model: MD-83 - Type: Fancy yarn winding machine - Heads / spindles: [TO BE CONFIRMED] - Winding speed: [TO BE CONFIRMED] - Power supply: [TO BE CONFIRMED - 220V or 380V] - Power consumption: [TO BE CONFIRMED] - Year of manufacture: [TO BE CONFIRMED - likely early to mid-1980s] ═════ APPLICATIONS Bwjdpfx Aszbg S Ujggen ═════ Suitable for the production of fancy yarns: - Bouclé yarns - Slub yarns - Chenille and effect yarns - Multi-color twisted yarns - Decorative and artisan textile yarns ═════ CONDITION ═════ - Used, from industrial closure (not due to malfunction) - Mechanical condition: [TO BE CONFIRMED after inspection] - Sold as-is, full inspection welcome - No warranty implied - Manufacturer is still active in Spain – technical support is theoretically available ═════ ABOUT THE MANUFACTURER ═════ Vallés de Fantasies (Sabadell, Catalonia) is a Spanish manufacturer specializing in fancy yarn machinery, and is still active today. The company can provide technical support and spare parts upon request. ═════ LOGISTICS ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: ~50 kg - Inspection welcome by appointment - Payment: bank transfer - International shipping: buyer arranges transport For technical questions, additional photos, or inspection appointments, please send a message.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Duplo DC-746 Multi Finisher / Card Cutter Bwsdpfx Agozbrvfogsn Minimum sheet size: 210 x 210 mm Maximum sheet size: 370 x 670 mm Materials from 110 to 350 g/m² Speed: Up to 50 sheets Good condition Available from July

Condition: good (used), Year of construction: 2023, For sale: Hypertherm Powermax 125A plasma cutting system, used in a professional industrial setting. Fully functional, in good working condition. Included: * Hypertherm Powermax 125A plasma source * Hypertherm ProNest cutting software * Enclosed extraction cutting table * Pressure marker for engraving Bwedpezacqksfx Aggon * 4kW extraction turbine with filter Reason for sale: business closure.