Used Bread Production Line for sale (24,129)

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: Ibedpsyi Ezkofx An Ijc - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), OMEV Pallet Production Line - Fully automatic - corner milling Ibedpfxeuz Igae An Ioc - stacker - sign burning

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Isdpfszaq Anex An Iobc Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick

Condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 180 kg, empty load weight: 150 kg, shovel volume: 1 m³, Year of construction: 2026, LK100 Laboratory Jaw Crusher - Stone crusher pilot scale crusher Ibedpfx Aoytnl Ton Ijc

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands. Isdpfx Asy Enwhon Iobc

Condition: new, A complete pallet production line. Number/Pos Part no/Name/Quantity 1/OKKR-100/Opti-Cutter Magasin/L=3000mm/1 Ibjdewduudjpfx An Isc 2/RON120/Block feeder carousel/1 3/OM-1500EL/Leg Machine/1 4/LP-OM/Leg positioning system/1 5/D-1000EL/Deck Machine/1 6/KTR-1006/Chain conveyor L=6000/1 7/GRG/Gantry Robot mechanical Gripper/1 8/SMS-1000EL/Assembly Machine/1 9/HKR/Automatic corner cutting machine/1 10/KTR-1004/Chain conveyor L=4000/1 11/ROB-G/Robot with mechanical gripper/1 Average capacity: 1500 pallets/8 hours (800x1200 mm pallet with max 6 deck boards) Maximum capacity: 1900 pallets/8 hours (800x1200 mm pallet with max 6 deck boards)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer for sale a fully functional and regularly serviced production line for manufacturing plastic windows. This is an excellent opportunity for medium-sized PVC window manufacturers. Year of manufacture: 2020–2022. • CNC machining and cutting center for profiles FA 1082 = 121,000 EUR • Welding and corner cleaning center TD 3020 = 62,000 EUR • Face milling machine PA 2010 = 4,000 EUR • CNC machine for cutting seals HJ 3010 = 8,000 EUR • Output robot M100 = 16,000 EUR • Seal pressing unit CB200 = included in the price TOTAL VALUE INDIVIDUALLY: 211,000 EUR SPECIAL OFFER 10% DISCOUNT ON THE ENTIRE PACKAGE PRICE OF THE COMPLETE PACKAGE: 190,000 EUR Ibedpfxozanmqs An Iec More photos/video available upon request. If you have any questions, please do not hesitate to contact us. Advantages: • Excellent technical condition • Regular professional service • Immediate availability • Significant cost savings compared to the price of new machines • Suitable for medium-volume production of PVC windows Additional information: • Option to purchase the entire line • Option for on-site inspection • We prefer to sell the complete line Location: Czech Republic Anna Michlová

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Ibedoxdibpspfx An Ioc Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Ibodpfx Ajz Ea N Rjn Isc Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Year of construction: 1993, condition: like new (used), Long line: Ibodpfjh Dxhfox An Ioc - capacity 350 kg / h - mixer - dispenser, water / flour, horizontal - snail, snail - Press - Vibro dispenser, reconditioned in 2010 - First dryer, reconditioned 2010 - Secound dryer - Possible accumulation of pasta in 8 hours - two dry tapes - two strips for dried pasta - Metal Detector - Comand pult - El. Cabinet - Autoatic packing unit ( 2012 )

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) KOCH T-100-B belt conveyor (250x4550) 3) Weinig Uniplan milling machine 4) KOCH T-100-B belt conveyor (250x7050) 5) KOCH SF-3 tenoning machine 5a) Lower belt conveyor for waste (at the tenoning machine, 300x6050) 5b) Side belt conveyor for waste (at the tenoning machine, 300x1800) 6) KOCH T-100-B belt conveyor (250x5020) 7) KOCH T-100-A belt conveyor (300x3050) 8) KOCH T-100-B belt conveyor (300x3500) 9) KOCH T-100-B belt conveyor (300x4530) 10) Weinig U2G milling machine 11) KOCH belt conveyor (250x4050) The line has been used for very few hours and is in like-new condition. Ibsdpfohm Exdex An Ioc The production year of the machines that make up the line is 1995. In addition, I am including a complete set of Leitz milling cutters for each machine, suitable for a Euro 68 profile window. The cost of a new line is currently over 1 million euros.

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running Ibedpsvw Egrjfx An Isc In excellent condition

Year of construction: 2012, condition: excellent (used), WEINIG window production line consists of: Unirex 3000 machining center Isdjh H Iyxepfx An Ijbc Univar 15 Unitex 15

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer this GEA COMAS LTH Type 400 automatic cake production line, manufactured in 2018, plus an ABRIGO ultrasonic cutting system, also manufactured in 2018. For sale is a complete GEA Comas line for the production of layered cakes, manufactured in 2018, consisting of: LTH main unit, TRA tray transfer, DRV and DPP cream and syrup depositing/metering stations, DVB unit, cream lifter-tilter, and syrup unit. Included: Abrigo "Flexcut Plus" ultrasonic cutting system for clean portioning, without deforming the cream/glaze. Functional industrial equipment, in very good condition, with minimal wear – the line has only been in operation for a short time, with few hours of use. Price upon request. Iedpszk Hdhefx An Ijbc For details or to arrange a viewing, please contact us via message or phone. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. Ijdpfxoq N U Due An Ijbc ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer Ibjdpfxsh Dxgaj An Ijc - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit

Year of construction: 2026, condition: new, Complete roll forming line for solar C profile production with punching, width adjustment and turnkey automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This Solar C Profile Production Line is designed for the manufacturing of high-quality C profiles used in solar mounting structures and renewable energy projects. The system provides a complete turnkey solution from coil feeding to finished profile output. Engineered for precision, durability and production flexibility, the line ensures stable operation, accurate punching, consistent forming quality and long-term industrial performance. Ibedpfey Any Rex An Ioc ⚙️ PRODUCTION RANGE The system can produce different C profile sizes according to project requirements: Web Width: 80 – 200 mm Flange: 40 – 60 mm Lip: 20 – 25 mm Material Thickness: 3 – 4 mm Custom profile dimensions are available upon request. 🔧 LINE CONFIGURATION The production line consists of: Hydraulic Coil Loading Car Hydraulic Decoiler Pinching Unit Straightener & Welding Station Servo Feeder 40 Ton Punch Press Roll Forming Machine Hydraulic Fix Type Shear Conveyor System Optional Automatic Stacking System ⚙️ ENGINEERING FEATURES Servo-controlled feeding system for accurate punching positions Programmable feeding with multi-job memory High precision punching and forming process Roll forming machine with NC width adjustment Hardened rollers for long service life Heavy-duty machine frame for continuous production PLC & HMI controlled automation system ⚡ OPERATIONAL ADVANTAGES Complete turnkey solar profile solution Flexible production for multiple profile sizes High product consistency and repeatability Reduced labor and improved efficiency Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Solar mounting systems Solar farm structures Renewable energy projects Steel support profile production Infrastructure projects 🧩 OPTIONAL CONFIGURATIONS Automatic stacking system Different profile dimensions Tooling for customized hole patterns Automation upgrades Turnkey factory integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar solar profile production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: good (used), Year of construction: 1992, Manufacturer - ERW Year - 1992 Range of round pipe - 21 - 76 mm Range of square pipe - 20x20 - 60x60 mm Sheet thickness - 0,8 - 3,5 mm Ibsdpfxodlqkqj An Iec Speed - 60 m/min. Lenght of line - 50 m Tools : square pipes - 25,32,38mm round pipes - 40, 51 mm Welding power - 180 KW Anode voltage - 14 kv Anode dissipation - 70 kw Frequency - up to 30 Mhz

Condition: good (used), Year of construction: 1999, 1) layer infeed systen (2 lines with 3 hoppers (300, 400, 500 mm) each incl. 2 2 x gluing units + 2 cut off saws 2) vacuum stacking unit + infeed transport belt for press 3) press unit Ibodpfehmk Umsx An Iec 4) vacuum de- stacking unit + outfeed transport belt 5) all control systems for complete line capacity: 10 strokes / min or approx 2400 layers/ 4 hrs Product: 3 layer lamella surface with max dimension 2208 x 186 x 4 mm

Condition: new, Year of construction: 2026, Industrial Edge Banding Machine The design of the edge banding machine ensures perfect application of 35 mm edge band tape, and supports workpiece thicknesses from 7.5 to 60 mm, covering a wide range of edge banding needs including situations such as missing corners or open spaces. It is also engineered for door panel structures with special configurations, allowing edge banding without requiring additional processing steps. Total power: 34.5 kW Minimum workpiece length: >= 120 mm Iedjyb Rxlopfx An Isbc Minimum workpiece width: >= 35 mm Workpiece thickness: 7.7 – 60 mm Edge band thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-side drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, which meet a variety of process requirements while offering maximum flexibility for individual batch production. The machine is equipped with an upper and lower drilling block, an ATC8 main spindle with 5.5 kW power, and a 2+8 tool changer magazine.

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg Ijdpfeya Ahvjx An Iebc - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: new, Year of construction: 2026, operating hours: 1 h, Production line for prefabrication of wall/floor/roof panels in wood construction - BOOSTON MACHINERY – This offer concerns a production line with a length of 9m (other lengths available from 3m to 15m). We are a manufacturer and offer complete production lines/equipment/butterfly tables/rotational tables/workstations for the prefabrication of wooden walls, designed for prefabricated house factories, modular construction, and manufacturers of wooden structures. The offered set enables the complete production process: from frame assembly, through wall cladding, panel rotation, to the transport of finished elements. Composition of the production line: 1. ER-00R/900 Workstation Assembly table for the construction of wooden frames, equipped with pneumatically lifting transport rollers. Parameters: * length: 9000 mm * overall width: 3600 mm * working height: 700 mm * 2 lines of pneumatically lifting rollers Purpose: * assembly of wall frames * positioning of structural elements * transport of prefabricated elements between workstations 2. SD-01 Clamping Cylinder Set A set of 6 clamping cylinders for the ER-00R workstation. Parameters: * quantity: 6 pcs * clamping force: 140 kg at a pressure of 8 bar Purpose: * clamping structural elements during assembly * stabilizing the prefabricated element during fastening and assembly 3. MT-01 Material Bridge Mobile bridge for the transport of panels and structural elements. Parameters: * load capacity: 800 kg * swiveling wheels 360° * manual movement between workstations Purpose: * transport of structural panels * transport of materials between workstations 4. ER-03H/900 Butterfly Table with Hydraulic Drive A workstation designed for rotating prefabricated walls and a separate workstation for assembling the frame and cladding (wing no. 1). - Wing No. 1 Parameters: * length: 9000 mm * width: 3600 mm * height: 700 mm * maximum load: 2500 kg * 3 lines of pneumatically lifting rollers Purpose: * assembly and transport of prefabricated elements * rotating walls - Wing No. 2 Parameters: * length: 9000 mm * width: 2300 mm * height: 700 mm Equipment: a set of roller pins for vertical transport of prefabricated elements onto transport trolleys 5. WP-01 Transport Trolley Set A set of 3 transport trolleys for picking up finished walls. Parameters: * adjustable support height * maximum load capacity of the set: 2500 kg Purpose: * picking up finished prefabricated elements * transport of walls in a vertical position ## Why BOOSTON MACHINERY? Ibodpjzc Uwbsfx An Ijc ✔ We are a machine manufacturer – you buy directly from the manufacturer, without intermediaries. ✔ Possibility to see the machines live in our production and storage hall. ✔ Products and components manufactured in Europe. ✔ 12 months manufacturer's warranty. ✔ Simple, durable, and proven design for use in prefabrication plants. ✔ No complex automation and extensive electronics – reliable mechanics designed for many years of operation. ✔ Modular design that allows for later expansion of workstations. ## Expansion Options We manufacture tables and production lines in the following lengths: 3.0 m • 4.5 m • 6.0 m • 7.5 m • 9.0 m • 10.5 m • 12.0 m • 13.5 m • 15.0 m

Year of construction: 1996, condition: excellent (used), The line is an original American-made line for upgrading sections of rollers for drawing profiles. The American-made line has a plate and a huge number of additional rollers for pulling pipes! - Year - 1996 - Line use pulsed TIG welding for argon blowing and it can be upgraded by laser and resistance. - Electric consumers 30 kW. - Profiles - stainless steel profiles ellipse, D profiles, hexagonal, square and rectangular pipes. - In profiles of all dimensions from sheet metal width 125 mm and thickness 1 to 2.5 mm. - Speed - 30-90 m/h - Cutting unit - cross section by hand or with a band saw. Ibjdpfjh Ni Dusx An Ijc - Line length 12 to 15 meters.

Condition: used, HESS RH500 1998r Isdpfx Anoyx Hx Rs Iobc control panel 2 moulds hydraulics conveyor

Condition: new, power: 90 kW (122.37 HP), fuel type: electric, Year of construction: 2026, machine/vehicle number: B18002026002, Ball mill Ibsdpfx Anoytm I To Ioc