Used Bruderer Bsta 20H for sale (368)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Tool holder VDI 40 Driven tools Side machining Bar loader / Irco 3 meter - up to diameter 50 mm ICS yes Heidenhain probe Gjdpewqp S Djfx Almsbl Memory slots 12 pieces Parts catcher Chip conveyor Handwheel Foot switch

Condition: excellent (used), Year of construction: 2003, operating hours: 27,900 h, functionality: fully functional, clamping force: 1 kN, screw diameter: 32 mm, Type: HL120 RS35/32 Gsdsu E Unfopfx Almsbl Year : 2003 Auger ø 32 mm Hours: 27.900 h

Condition: ready for operation (used), functionality: fully functional, mileage: 260,000 km, first registration: 10/2005, fuel type: diesel, maximum load weight: 1,230 kg, overall weight: 3,500 kg, next inspection (TÜV): 01/2027, fuel: diesel, color: white, driver cabin: day cab, number of gears: 5, emission class: euro3, number of seats: 3, loading space length: 3,930 mm, loading space width: 2,040 mm, loading space height: 2,200 mm, Year of construction: 2005, Nissan Cabstar with flatbed and fixed tarpaulin, 40 cm side panels, length 393 cm, width 204 cm, additional leaf springs, side tarpaulins with quick-release system, payload 1230 kg, 3000 cc engine, 130 hp, year 2005, inspection currently valid. Gsdpfx Ajyr Nwuelmobl

Condition: excellent (used), mileage: 141,020 km, power: 96 kW (130.52 HP), first registration: 11/2011, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro4, suspension: steel, total length: 5,800 mm, total width: 2,120 mm, total height: 2,200 mm, Year of construction: 2011, BELGIAN REGISTRATION CERTIFICATE = Further Information = General Information Cab: single Technical Information Engine displacement: 2,488 cc Axle Configuration Suspension: leaf spring Front axle: articulated Rear axle: dual wheels Weights Unladen weight: 2,260 kg Payload: 1,240 kg Gross vehicle weight: 3,500 kg Functional Tipping body: rear Gbsdpfx Ajyl Ib Sjlmel Condition Technical condition: very good Visual condition: very good Further Information Contact Thierry Leemans for more details.

Condition: used, functionality: fully functional, mileage: 282,522 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cruise control with active prediction Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Gbodpfxoyr Rkvs Almel Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Gsdpfx Ajymf Iljlmsbl Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: used, mileage: 467,000 km, power: 315 kW (428.28 HP), first registration: 02/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,990 mm, total width: 2,520 mm, total height: 3,960 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, power mirror, second fuel tank, Front axle: Steering; Tyre profile left: 60%; Tyre profile right: 60% Rear axle: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Number of cylinders: 6 Engine capacity: 12.777 cc Empty weight: 7.793 kg Carrying capacity: 11.407 kg GVW: 19.200 kg = Additional options and accessories = - Air horn - Air suspension - Alarmsystem - Aluminium fuel tank - Heated driver's seat - Line assist - Lock diff - Outside temperature display Gbodpfxsylxpts Almel - Radio/CD player - Roof and side spoiler - Side skirts - Sleeper cab - Spotlights - Vehicle heater - Visor

Condition: used, FANUC A06B-6120-H075 Welcome to the Fanuc A06B-6120-H075 servo amplifier, a masterpiece of precision and performance. precision and performance. This servo drive is the ideal solution for industrial industrial applications that require the highest accuracy and reliability. and reliability. Developed by Fanuc, a global leader in CNC control technology CNC control technology, the A06B-6120-H075 stands for quality and innovation. With its impressive performance and robust design, this servo amplifier is this servo drive is perfectly suited to meet the most demanding requirements of modern Gbjdpfx Alsr Dgzvjmsl modern manufacturing environments. Its precise control and fast response time ensure outstanding performance in various applications applications, from machine tool control to robotics. Discover the unrivaled precision and reliability of the Fanuc A06B- 6120-H075 servo drive and take your industrial applications to a new level of performance. a new level of performance.

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,610 mm, loading space width: 1,850 mm, loading space height: 350 mm, loading space volume: 2.7 m³, color: silver, construction height: 1,180 mm, working width: 2,000 mm, steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,100 kg - Payload: 2,400 kg - Interior dimensions: 361 x 185 x 35 cm (L x W x H) - Overall exterior dimensions: 514 x 200 x 118 cm (L x W x H) - Loading sill height: 72 cm - Tires: 185/70R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional! - incl. vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: solid steel drop sides, hot-dip galvanized, removable - Drop side height: 35 cm - Chassis: high loader, KNOTT parabolic spring axle - Tipping function: yes, three-sided - Hydraulics: electric & can be tipped with emergency hand pump - Tipping angle: approx. 45 / 47 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at an extra charge - Lashing eyes: 8. Ramps: at extra charge - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Hot-dip galvanized and reinforced solid steel drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Tailgate can also be swivelled - Solid steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - e-hydraulics for tipping with battery in the box and cover - built-in battery - integrated battery charger, and charge level indicator - emergency hand pump fitted - automatic reverse drive - parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - ramp shaft as preparation for ramps - sturdy angle lever locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - corrugated grille attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Godpfx Alju Hr Rtjmobl

Condition: good (used), Danfoss FC-102P45KT4E20H1XG 45kW/60HP 131F0340, 3x380-480Vfrequency inverter. Gjdjpugc Eopfx Almebl Item condition: Used 60kg Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - you can find in our store! International shipping costs on request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 Gedsibichopfx Almobl - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2000, Manufacturer: Demag Type: DH520 H20 4/1 F10 Year of manufacture: 2000 lifting capacity appr.: 8.000 kg hook path appr.: 10,000 mm trolley track appr.: 1,400 mm Reeving: 4/1 Godpokqm Aisfx Almsbl Thruster group: FEM/ISO 2m/M5 Working speeds: hoist appr. 0.8/8.0 m/min trolley appr. 5.0/20.0 m/min Certification of the remaining service life of appr. 80% by an inspection expert Equipped with: - Mechanical fine lift F10 - Rope and bottom block 4/1 - trolley

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler Gbedpfx Alsvvl Ugomsl • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Gbsdpjyguk Aofx Almol Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3630x1790x1760 mm Weight 4300 kg Gedpev A Hpfefx Almebl Total power requirement 42,6 kw

Condition: ready for operation (used), Year of construction: 1970, Double sanding bench with tilting device Type:R20 1 H Grinding wheel diameter 200 mm. Godpfxotwnxue Almebl

Condition: good (used), The scope of delivery includes: 1x Shelf Connector, used Manufacturer: Stow Type: Pal Rack NS Material color: Sendzimir galvanized Total length: approx. 150 mm Shelf spacing: approx. 150 mm Gbodpov Ua S Rsfx Almel Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Drill hole diameter: approx. 11 mm Weight: 0.200 kg | pc. 2x Screws M10 x 35 mm 2x Nuts M10 4x Washers M10 Your contact person: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: as good as new (ex-display), The scope of delivery includes: 01x shelf connector, second choice (new) Manufacturer: Kimer for shelf spacing: approx. 200 mm Material color: sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | pcs. Godpfx Ajrnrdgjlmebl Remark: This is a II. Wahl product, new and unused. II. Choice means that there may be dust deposits, minimal scratches or soiling may be present. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Polypal for shelf distance: approx. 545 mm total length: approx. 610 mm profile dim.: U 50 x 15 mm Weight: approx. 0,650 kg | pcs. Godpfsi Igcaox Almebl General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used ( for lateral fastening to the shelf uprights ) Total length: 391 mm Shelf distance approx.: 289 mm L - profile: 40 x 40 mm Gjdpfx Alji A Iu Ajmebl dimension center - center drill hole: approx. 353 mm Weight: 0.39 kg | pcs. Material color: sendz. galvanized

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Polypal Included in delivery: 1x shelf connector, used Gbedpfx Aswmng Sslmol for shelf spacing: 250 mm Total length: approx. 310 mm U-profile dimensions: approx. 50 x 15 mm Material color: Sendzimir galvanized Material thickness: approx. 2 mm Drill hole diameter: 10 mm Weight: 0.270 kg | each includes: 2x M10 x 35 mm screws 2x M10 nuts 2x M20 washers Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Polypal Included in delivery: 1x shelf connector, used Gbedpfx Aowhkbzolmol for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material color: Sendzimir galvanized Drill hole diameter: 11 mm Weight: 0.250 kg | each includes: 2x screws M10 x 35 mm 2x nuts M10 2x washers M20 Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the shelf connector: Shelving system: SLP The scope of delivery includes: 01x shelf connector, used for shelf spacing: 310 mm Total length: 310 mm Cross section: L 25 x 25 mm Material thickness: approx. 3.00 mm Material color: orange Drill hole diameter: 13 mm Weight: 0.460 kg | piece 04x screws M10 x 35 mm 04x nuts M10 Gbodpfxovuxy Ts Almel Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of supply includes: 01x shelf connector, used Manufacturer: Schäfer Type: PR600 Material colour: RAL 5010 blue Total length: approx. 280 mm Distance between shelves: approx. 200 mm L-profile: approx. 40 x 40 x 3 mm Weight: 0.400 kg | each 02x bolts M8 x 20 mm Godpjwv Rg Hsfx Almobl 02x nuts M8 04x washers M8 Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and the scope of supply.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2024, next inspection (TÜV): 04/2025, * Krampe HP 20 Halfpipe tipping trailer * Hardox floor plate * Hydraulic tailgate Gsdpfx Ajuckmijlmsbl * Mechanically folding rear underrun protection * BPW axles * Drum brakes * Drawbar with K80 ball coupling * 40 km/h approval -----Internal vehicle number: 9395----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us via WhatsApp Whatsapp Whatsapp