Used Cabinet for sale (3,960)

Condition: good (used), Storage location number: 3109 Manufacturer: Econoline Machine number: Njdpfxszaavws Agrjdb Type/Model: 101698G-A Table surface: 1,000 x 1,000 mm Internal height: 800 mm Accessories/Equipment: Dust extraction system LEESON 0.3 kW Condition: good Dimensions: 1,100 x 1,400 x 2,000 mm Weight: 230 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Ndedsz Agv Uopfx Agrsb - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2019, Overview This Krones VarioFlash B is a flash pasteurization system for beer and beer mix beverages, built in 2019 by Krones AG at its Steinecker plant in Freising, Germany. It pasteurizes 20 - 45 hl/h in a three-stage plate heat exchanger with energy recovery, a heat retention tube and a cooling stage. Everything is mounted on a stainless steel skid with a horizontal 2,100 l buffer tank, and a freestanding stainless steel control cabinet with touchscreen HMI completes the system. Technical data - Manufacturer: Krones AG (Werk Steinecker, Freising, Germany) - Model: VarioFlash B with cooling stage - Year of manufacture: 2019 - Machine type: flash pasteurizer with plate heat exchanger - Products: beer, beer mix beverages - Capacity: 20 - 45 hl/h - Pasteurization temperature: 71 - 85 °C - Holding time: 30 s at 45 hl/h - Max. CO₂ content: 6.5 g/l - Product inlet temperature: 5 - 15 °C; product outlet temperature: 16 °C - Energy recovery: approx. 91 % - Heating requirement at 85 °C: approx. 51 kW (approx. 90 kg/h steam at 6 bar(g), 165 °C) - Cooling requirement with water circulation at 5 °C: approx. 38 kW (5 m³/h glycol water, 2 - 10 °C) - Process water: inlet pressure 4.0 bar(g), inlet temperature 6 - 15 °C - Buffer tank: 2,100 l, max. allowable pressure -1.0 / +7.0 bar, allowable temperature -4 to +98 °C, CE marked Equipment - Plate heat exchanger with 3 stages: energy recovery, pasteurization with temperature control, cooling with temperature control - Heat retention tube with fixed length; PU control depending on temperature and flow rate - Hot water circuit with separate brazed plate heat exchanger, temperature control, circulation pump and expansion vessel - Sanitary product pumps: frequency-controlled product feed pump, booster pump for a positive pressure difference towards the unpasteurized product, frequency-controlled product pump to the filler - Horizontal stainless steel buffer tank, pneumatic valves, inline instrumentation and sanitary pipework on a tubular stainless steel frame - Freestanding stainless steel control cabinet with touchscreen HMI and main switch Condition Used. The system has been removed from production and is stored indoors. It can be inspected by appointment. Availability Njdpfxjz Ekdxe Agrjdb Immediately. Location: Germany.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,729 h, spindle speed (max.): 4,500 rpm, spindle motor power: 15,000 W, overall weight: 3,700 kg, controller manufacturer: FANUC, controller model: FANUC 0i-TF, number of axes: 3, This 3-axis Goodway GLS-2000LYS was manufactured in 2022. It features a spindle speed of 4,500 rpm and a robust 12-station driven turret. The machine includes an 8" hydraulic chuck with a bar capacity of 65 mm and a 5" sub-spindle. If you are looking to get high-quality turning capabilities, consider the Goodway GLS-2000LYS horizontal turning machine we have for sale. Contact us for further details. • CNC control: FANUC 0i-TF (10.4" display with Manual Guide) • Working hours: 17,29H 24M 34S (operating time); Part count: 10,250 • Main spindle chuck/collet: 8" hydraulic cylinder, Bellegrandi BA70 collet chuck group (bar capacity 65 mm) • Sub-spindle: 5" sub-spindle with hydraulic cylinder and ejector, Bellegrandi BA70 collet chuck group • Axes: C-axis (main & sub-spindle with disc brake), Y-axis • Turret: 12-station driven turret • Tool presetter: Renishaw HPRA manual presetter • Coolant pump: 7 bar / 3 bar M-code switchable pump and Grundfos 3/4 HP pump • Power supply: AC 380 V, 3-phase, 50/60 Hz • Nominal capacity: 30 kVA • Main breaker current: 50 A Additional equipment Nodpfez D E Ipex Agrsdb • Chip conveyor with timer • Bar feeder (included) • 20x Bellegrandi BA70 collets • Driven tool holders: 4 double axial driven tools, 2 radial driven tools • RS232 interface • Electrical cabinet heat exchanger Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2010, operating hours: 30,343 h, travel distance X-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details. Ndjdpfjz Eai Rex Agreb - Operating Hours (Main Switch On): 67,030 h 12 min- Operating Hours (Machine Fully Switched On): 45,945 h 26 min- Operating Hours (Automatic Production Mode): 30,343 h 56 min- Main Spindle Running Hours: 18,096 h 58 min- Total Tool Changes: 3,129,425- NC Control Manufacturer: Siemens- NC Control Type: 840D- Main Spindle Manufacturer: Fa. Chiron- Main Spindle Motor Manufacturer: Siemens- Main Spindle Motor Type: 1 PM 6105-2 LZ 84-9 EM 1-Z- 4th Axis Manufacturer: Fa. Peiseler- 4th Axis Type: ZAS160- 4th Axis Counter Bearing: Peiseler GP MK3- 5th Axis Manufacturer: Fa. Peiseler- 5th Axis Type: ZAS160- 5th Axis Counter Bearing: Peiseler GP MK3 - Substructure (Base Frame) Manufacturer: Hamül- Substructure (Base Frame) Type: L- Machine Structure Manufacturer: Chiron- Hydraulics Manufacturer: FMB- Hydraulics Type: 3116265- Cooling Unit (Chiller) Manufacturer: Hyfra- Cooling Unit (Chiller) Type: VWK90-D0- Central Lubrication Manufacturer: SKF- Central Lubrication Type: KAF1-M-W-S3+924- Control Cabinet Cooler Manufacturer: Rittal- Control Cabinet Cooler Type: SK3304142- Extraction System Manufacturer: Umwelttechnik 99- Extraction System Type: LCF-3000- Fire Extinguishing System Manufacturer: Total Walther- Fire Extinguishing System Type: (UE-03)K8- Coolant System 2 Manufacturer: Bürener Maschinenfabrik- Coolant System 2 Type: 001300000170- Chip Conveyor Manufacturer: Knoll- Chip Conveyor Type: 750K-1150/- X-Axis Motor Manufacturer: Siemens- Tool Magazine Chain Motor Manufacturer: Siemens- Tool Magazine Chain Motor Type: 1 FT 6034-4 AK 71-3 EA 1- Tool Magazine Linear Motor Manufacturer: Siemens- Tool Magazine Linear Motor Type: 1 FK 7063-5 AF 71-1 EH 2- Chip Conveyor Screw Motor Manufacturer: Bauer- Chip Conveyor Screw Motor Type: BS04-71V/D06LA4

Condition: good (used), Reinhardt LTV 100 Oven 200°C Manufacturer: Reinhardt Type: LTV 100 Ndodpfoxbf T Njx Agrjb Usable space: 0.65 m³ Steam chamber: 1.04 m³ Power: 10.56 kW Fresh air exchange: 1 l/min Tray with 7 supports Size W x D: 770 x 850 mm Voltage: 380 V Operating temperature: 50°C - 200°C Nominal temperature: 130°C Dimensions H x W x D 2050 x 1650 x 1180 mm Chamber: H x W x D 1000 x 800 x 950 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Ndsdpfx Agezz Rpcsreb - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Ndodpfx Ageznd Skerjb Sincerely, Leo Holland

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Ndjdpfx Aoz Agw Esgrob - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Nodpez Ag Rrefx Agrodb - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. Nodpfx Agjz Eaz Tsrodb • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm • Spindle bore: 115 mm; draw tube ID: 103 mm • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Ndsdpey Ua Rxofx Agrob Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: ready for operation (used), functionality: fully functional, WALTHER CN 550 PN TROWAL & RÖSLER Z 300 Turbo Floc Centrifuge -Walther Trowal & Rösler Turbo Floc Centrifuge -Coating in good condition -Rotational speed: 1460 RPM -Capacity: 550 liters -Motor: 3.5 KW -Pneumatic soundproof cover -Control cabinet Nedpfx Agez Dg Ikorodb -SEPARATION UNIT -Dirty water / drain system -Compound and 2 x sets of sliding stones -Documentation Dimensions: L x W x H 2 x 1.8 x 1.8 meters / Weight: 1500 kg RÖSLER Z 300 TURBO FLOC - CENTRIFUGE -Year of manufacture: 1996 -Rotor speed: 3160 RPM -Power: 4 KW -Max. throughput: 800 liters / hour -Documentation -Dimensions: L x W x H 1.7 x 1 x 1.6 meters / Weight: 480 kg Errors and omissions excepted.

Condition: used, SNOL Type: SNOL 120/350 SNOL heating and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume 120 liters Internal dimensions 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation via integrated fan, over-temperature protection Chamber made of stainless steel Door hinge on the right, includes two shelves Low power consumption Fast heating and cooling times Powder-coated housing, RAL 7035 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone. Njdpsziiutjfx Agrsdb

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Paulimot PM4000 lathe with measuring system and base cabinet For sale is a Paulimot PM4000 precision lathe, including a digital measuring system (3-axis digital display) and a matching base cabinet. The machine is ideally suited for use in workshops, model making, prototype manufacturing, training, or for demanding hobby users. The integrated measuring system allows for precise and convenient execution of work. Equipment: Paulimot PM4000 lathe Digital measuring system / digital display Sturdy base cabinet Lead and feed screw Forward and reverse operation Various feed and thread settings Ready for immediate use Technical data: Distance between centers: 900 mm Swing over bed: 310 mm Spindle bore: 38 mm Internal chuck clamping range: 4-200 mm External chuck clamping range: 65-200 mm Motor power: 1.5 kW Power connection: 400 V Ndsdpfez A Uqkjx Agrob Condition: The machine is in used and functional condition, with the usual signs of wear and tear due to age and use. An inspection and functional test on site is possible by arrangement. Scope of delivery: Paulimot PM4000 lathe Digital measuring system Base cabinet Various accessories and tools can be purchased separately. Weight: 542 kg More information on the manufacturer's website. Shipping costs are borne by the buyer; assistance with loading using a forklift can be provided. Sold from a private individual.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Highly dynamic and precise CNC laser machine solid polymer concrete machine body Nodpfsyvfuwox Agrsdb cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control

Condition: used, Dimensions (L/W/H) 1430x780x980 mm Number of drawer 10 Stück Number of floors . 0 Width of floors . mm Depth of floors . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ndsdpfxsyqwbfe Agrob If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, rotating drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 6 rotating drawers, layout/height see photos / height adjustable in a grid pattern -lockable: without key -Number: 3x drawer cabinet available -Price: per piece Ndedpfxexlynpo Agrob -Dimensions: 720/480/H1200 mm -Weight: 106 kg/unit

Condition: excellent (used), Rittal TS 8806.500 Enclosure Rittal Standard Enclosure TS 8806.500 Lighting PS 4155100 220 x 80 x 60 cm (H x W x D) Powder-coated Air Conditioning Unit Rittal SK 3304500 Nedpfxexl Td Rs Agredb EAN: 4028177251038 Further enclosures in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Second-hand control cabinet from a Venjakob drying channel, to be used as a source of spare parts or for building a new control cabinet. Nedjzrxrgepfx Agrjdb Technical data: - Dimensions: 100 x 40 x 220 cm

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors Ndodpjzlh Auefx Agrob control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Consisting of: Drawer cabinet PT01 Width: 1120 mm x Height: 1550 mm x Depth: 724 mm (12 x SL 100 mm, 1 x SL 150 mm) 12/16/20/24 individual compartments per drawer Drawer cabinet PT02 Ndodpfx Agezl Sh Uersb Width: 800 mm x Height: 1000 mm x Depth: 724 mm (4 x SL 125 mm, 4 x SL 100 mm) 12/16 individual compartments per drawer Both drawer cabinets have: 1. Drawer locking mechanism 2. Individual compartment locking mechanism

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Nodpfx Aey Au Alsgrsdb Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: not inspected (used), Year of construction: 2001, operating hours: 16,601 h, ABB robot with control cabinet was in working condition. Dismantled in working condition 5 years ago. Sold as seen in the photos. Ndedpfx Asymkb Degrsb

Condition: good (used), J-Tec sack tipping cabinet with filter extraction Entirely stainless steel Lockable by lid Full sensor present Control cabinet excl. cabling Equipped with pneumatic bunker vibrator Matching weighing hopper with vacuum filter and double K-Tron dosing screw also available Ndsdswyf Iyepfx Agrsb See our other advertisements