Used Case Taper for sale (5,486)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 27,660 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle motor power: 20,000 W, table load: 1,000 kg, number of slots in tool magazine: 36, number of axes: 5, This 5-axis HERMLE C 32 U was manufactured in 2017. It features a maximum X-axis travel of 650 mm, Y-axis travel of 650 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed range of 20 - 18,000 rpm and a tool magazine capacity of 36 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C 32 U universal machining centre we have for sale. Contact us for further details. Blsdpfxozxdrxe Aqwel - Spindle Power (100%/20% ED): 10 / 20 kW- Spindle Torque (100%/20% ED): 87 / 180 Nm- Swivel Rotary Table Diameter: 650 x 540 mm- Swivel Range (A-Axis): +/- 130°- Swivel Range (C-Axis): 360°- Tool Magazine Capacity: 36 positions (standard) + 50 positions (additional magazine)- Rapid Traverse (X-Y-Z): 45 - 45 - 40 m/min- Max Acceleration: 6 m/s²- Internal Coolant Supply: 80 bar- Coolant Tank Capacity: Main tank 100 L, IKZ tank 1100 L- Power Consumption: 37 kVA (Nominal: 45 kVA)- Supply Voltage: 400 V / 3PH / 50 Hz- Nominal Current: 60 A- Control Voltage: 24 V DC Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm) Bedpfx Aqszipzyswsll

Condition: used, Technical details: drum diameter: 400 mm revolutions per minute: 980 U/min total power requirement: 2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control Bsdpfx Aqjft Tipswoll -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray This is not a used machine! Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal Blodpfx Aqozxqvdewel - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Bedpfjzw Ucxox Aqwell Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Blsdpfozw Ug Rox Aqwjl Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: like new (used), Vertex BS-1 Semi-Universal Dividing Head Semi-Universal Dividing Head Vertex Type/Model: BS-1 Condition: Like new, in original packaging Technical data: Center height: 128 mm Swivel range: -10° to +90° Spindle taper (internal): MK3 Spindle bore: 20 mm Weight: approx. 36 kg Scope of delivery: see images Bjdozw H Duepfx Aqwsll Inquiry item: Shipping costs will be provided in an individual offer.

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) Bjdpszw I Hkofx Aqwjll - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: used, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 04/2020, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6.1 L2 long wheelbase, 4Motion / all-wheel drive with differential lock, with a gross vehicle weight of 3.2 tons. From first owner and with optimal equipment, ideal for trades and businesses, e.g. as a service vehicle / workshop vehicle. Workshop fit-out from ALUCA (see below). All-wheel drive (4Motion, 4M, 4x4, 4WD) with mechanical rear differential lock. Underbody protection (engine and transmission) made of aluminum. Trailer hitch, 2.5-ton towing capacity, removable. Mounting rails for roof rack. Auxiliary heater, programmable and with remote control. Climatic air conditioning with pollen filter. Driver assistance systems: - Park Distance Control (PDC) front and rear, optical and acoustic display. - Rear view camera. - Cruise control with speed limiter. - Trailer stabilization. - Side wind assist. - Brake assist (HBA). - Driver fatigue detection. - Tire pressure monitoring system. - ABS, ASR, ESP. Light and Visibility Package: - Automatic headlights. - Automatic windshield wipers. - Automatically dimming interior mirror. Audio-navigation system Discover Media (touchscreen color display): - Navigation with TMC. - Radio (FM). - USB, Bluetooth audio, web radio, BT streaming. - Hands-free system for mobile phone with Bluetooth. - App Connect (Apple CarPlay, Android Auto, Mirror Link). - Mobile Online Services Car-Net. - Voice control for radio, media, telephone, navigation. Multi-function display Plus / on-board computer. Electrical Package 1: - Electric windows. - Electrically adjustable and heated exterior mirrors. Central locking with remote control. 2nd battery with separator relay. Heated windshield washer nozzles. Spare wheel in driving condition and jack. Additional equipment: Airbag package: - Front airbags. - Side airbags in the seats. - Head airbags in the B-pillar. Sliding door to the cargo area on the right with tinted window. Rear door with tinted window, heated, windshield wiper. Wheelbase 3400 mm. Bjdpfxszw Nz Ae Aqwoll Truck registration - N1. 6-speed manual transmission. Adjustable steering wheel. Comfort driver and passenger seat with armrests on both sides, foldable, adjustable: - Seat height, backrest, lumbar support. Seat cover fabric. Non-smoker package. Heat-insulating glazing. Cargo area equipment: ALUCA workshop fit-out (similar to Bott, Sortimo, Würth). Shelving with storage compartments on both sides, shelf compartments, 10 drawers, cabinet compartment and 4 tool / small parts cases (ALU). Fold-out vise. Cargo area partition with window, upholstered in the driver's cab (noise-insulated). Robust, plastic-coated wooden floor. Headliner. Load securing through eyelets and mounting rails. Bright LED lighting. Cargo area dimensions: - Length at the bottom: approx. 282 cm - Length in the middle: approx. 270 cm - Length at the top: approx. 258 cm - Height: approx. 134 cm Mounted tires: Winter tires 215/65 R 16 on steel rims with approx. 9/9/9/9 mm tread depth. Additional tires: Summer tires 205/65 R 16 on steel rims with approx. 3 / 3 / 3 / 3 mm. Maintenance history from VW: 02.2021 / 26,283 km Inspection with oil change. 02.2022 / 54,685 km Inspection with oil change. 03.2023 / 79,989 km Inspection + brake fluid + oil change. All-wheel drive coupling (Haldex). 07.2023 / 85,852 km Oil change. 07.2023 / 85,852 km Action 5711 Critical 01. 03.2024 / 94,392 km Inspection. 04.2025 / 109,843 km Inspection with oil change + brake fluid + interior air filter. 03.2026 / 126,180 km Inspection with oil change + interior air

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle HardoX steel tipper, 86 m³ First registration 01/2023, from first owner Dimensions (L x W x H) 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight 9,640 kg Floor made of continuous 5 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Pneumatically foldable rear underrun protection Straight front wall, with interior ladder Rear portal doors 50:50, pneumatic secondary release Reinforced tarpaulin cover HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST crank-type landing gears, full load capacity SAF axles with large disc brakes, 430 mm 1st axle: lift axle WABCO trailer EBS with overrun protection RSS WABCO Smartboard Bodpfjzwr Urox Aqwjll Raising and lowering device Automatic tipping lowering Tires: 6x 385/55 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss finish Aluminum step ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING; with us, full-service rental options are immediately available.

Condition: good (used), Year of construction: 2004, operating hours: 38,930 h, functionality: fully functional, machine/vehicle number: 16495, spindle speed (max.): 18,000 rpm, Make: HERMLE Type: C600U Control: HeidenHain iTNC 530 Year: 2004 X - Travel 600 mm Y - Travel 450 mm Z - Travel 400 mm A - Axis 110 ° B - Axis 360 ° Table Ø 280 mm Feed rate X-Axis 35000 mm/min. Feed rate Y-Axis 35000 mm/min. Feed rate Z-Axis 35000 mm/min. Feed rate A-Axis 10 Degrees/min Feed rate B-Axis 15 Degrees/min Spindle Taper 40 ISO/Bt/Mk Power on spindle 15 kW Bedpfszwt Hpox Aqwoll Speeds / ranges 18000 Rpm ATC / revolver 30 Chip conveyor No

Year of construction: 1991, condition: ready for operation (used), Available immediately, ex works: Drill press, Metalac Type BR 32 Year of manufacture 1991 Spindle taper MK 3 Drilling capacity: 32 mm steel, 40 mm cast iron Automatic feed Blodpfozwuhbex Aqwel Table: 600 x 470 mm Drilling stroke: 180 mm Overhang: 280 mm 2 vices Coolant system Weight: 750 kg Price: EUR 1,250.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 2,860 mm, total width: 2,760 mm, table width: 700 mm, table length: 1,200 mm, overall weight: 7,390 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Quaser MV184P/12B was manufactured in 2015. It features a travel distance of 1020 mm on the X-axis, 610 mm on the Y-axis, and 610 mm on the Z-axis. The machine is equipped with a Siemens 828D controller and has a maximum rotational speed of 12000 rpm. If you are looking to get high-quality machining capabilities, consider the Quaser MV184P/12B vertical machining centre we have for sale. Contact us for further details. Bsdezw Dcbspfx Aqwoll • Operating hours: 8,500 h • Functionality: Fully functional • Spindle speed control: Infinitely variable Additional equipment • Chip conveyor Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2025, operating hours: 600 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 225 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 800 mm, spindle motor power: 18,500 W, total height: 2,365 mm, total width: 2,085 mm, overall weight: 8,900 kg, controller manufacturer: FANUC, controller model: 0iTF PLUS, product length (max.): 4,210 mm, number of axes: 5, This 5-axis Leadwell LTC-25iSMY was manufactured in 2025. It features a maximum turning diameter of 590 mm and a turning length of 770 mm. The machine is equipped with a powerful spindle speed of 3500 rpm and a robust tool head with 12 positions. If you are looking to get high-quality turning capabilities, consider the Leadwell LTC-25iSMY horizontal turning machine we have for sale. Contact us for further details regarding this machine. • Capacities • Max. turning diameter above the bed: 590 mm • Max. turning diameter above the transverse support: 590 mm • Max. turning diameter: 430 mm • Max. turning length: 770 mm • Max. rod diameter: 78 mm • Max. workpiece weight: 39 kg • Axes and travels • Z2 (counterspindle) travel: 780 mm • Min. C1 axis positioning increment (main spindle): 0.001 • Min. C2 axis positioning increment (counterspindle): 0.001 • Main spindle • Chuck size: 254 mm • Spindle taper: A2-8 • Spindle bore: 89 mm • Spindle drive type: Fanuc A P30/6000i • Counterspindle • Max. speed: 4000 rpm • Chuck size: 210 mm • Taper: A2-6 • Max. rod diameter: 66 mm • Power: 15 kW • Spindle drive type: Fanuc A 12/7000i • Turret / tooling (EWS tool head) • Clamping system diameter: BMT65 • Number of positions: 12 • Max. external tool size: 25 x 25 mm • Max. internal tool clamping diameter (threading): 40 mm • Neighbor tool change time: 0.8 s • Max. tool change time: 1.3 s • Max. speed of driven tools (axial): 4000 rpm • Max. speed of driven tools (radial): 4000 rpm • Rotary tool drive power: 4.5 kW • Rapid feeds • X: 15,000 mm/min • Z: 20,000 mm/min • Y: 7,500 mm/min • Z2 (counterspindle): 20,000 mm/min • Control • Fanuc 0iTF PLUS with 15" LCD, Manual Guide i, Ethernet • Machine input: 65 kVA Additional equipment • Collet clamping • Hydraulic chuck 254/3 (10"), bar max Ø77 mm, 3500 rpm • Renishaw HPMA tool probe (motorized arm) • High-pressure coolant 20 bar through tool head • Workpiece blow-off nozzle above main spindle • Workpiece blow-off nozzle above counterspindle • Cassette chip conveyor with chip container • Counterspindle with chuck 203/3 • Workpiece removal shovel with container • Preparation/interface for bar feeder • Beacon alarm (machine status light) • Oil separator for coolant emulsion (from lost lubrication) • 3 pcs axial rotary unit BMT65 • 3 pcs radial rotary unit BMT65 • 4 pcs double-sided holder for external turning BMT65 Blsdpfxjzw D Drj Aqwjl • 4 pcs double-sided holder for internal turning BMT65 • 1 pc single-sided holder for internal turning • Filtermist extraction FX5002 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table length: 4,500 mm, total height: 3,400 mm, total width: 5,390 mm, total length: 11,100 mm, workpiece weight (max.): 9,000 kg, overall weight: 22,500 kg, spindle motor power: 22,000 W, spindle nose: ISO 50, Fixed-bed milling machine built by Nicolás Correa in 2002, fitted with a Heidenhain TNC 426 CNC control and electronic handwheel. Working table measuring 4,500 × 1,100 mm with eight T-slots, 22 mm wide and spaced approximately 125 mm apart. Maximum permissible table load of 9,000 kg. Axis travels of 4,000 mm in X, 1,250 mm in Y and 1,500 mm in Z. Blodezw Hgvepfx Aqwel Universal milling head with manual positioning, hydraulic tool clamping and ISO 50 spindle taper. Main spindle rated at 22 kW with infinitely variable speed control across a range of 20 to 3,000 rpm. Cutting feed from 2 to 5,000 mm/min; rapid traverse of 15,000 mm/min on the X axis and 10,000 mm/min on the Y and Z axes. Compensation on the Y and Z axes, through-spindle coolant supply and provision for a fourth axis. The machine is supplied with a shared fourth axis, 400 mm in diameter. CE marked. Condition: axis movement is correct, with no unusual noise or vibration. Measured deviation of approximately 0.15 mm. The milling head is functional and shows slight play. The machine has been kept under basic maintenance and is in working industrial condition. Approximate weight between 22,500 and 24,000 kg. Approximate overall dimensions of 11,100 × 5,390 × 3,400 mm.

Condition: refurbished (used), Machine is located at our premises in Burscough. We welcome any inspections prior to sale. Spindle Diameter 4" / 101.6mm Spindle Taper 50 INT Main spindle travel 30" / 762mm Spindle speeds 10 - 1300rpm Vertical Y Travel - 48" / 1219mm Main Motor 25 HP Equipment - Facing head, outer (tailstock) steady Vast amount of tooling, rotary table, angle plates. DRO Pendant control Bodpfxozwmrls Aqwoll This machine has undertaken a full machine rebuild and all slides re ground. Exceptional condition

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 600 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Matsuura H. Plus 405 was manufactured in 2006. It features an X-axis travel of 600 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm, along with a 360° rotary B-axis. The machine has a maximum workpiece size of 700 × 850 mm and a tool changer capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the Matsuura H. Plus 405 horizontal machining centre we have for sale. Contact us for further details. • B-Axis: 360° rotary table • Rapid Traverse X/Y/Z: Up to 60 m/min • Pallet Size: 500 × 500 mm • Maximum Workpiece Size: 700 × 850 mm • Maximum Workpiece Weight: 400 kg • Pallet Changer: 2-position • Main Spindle Speed: Max. 12,000 rpm • Tool Holder Options: SK40 / BT40 / HSK63 • Max Spindle Drive Power: 15 / 22 kW • Maximum Spindle Torque: 187 Nm Bsdpozwp S Usfx Aqwell • Tool Changer Capacity: 60 tools • Chip-to-Chip Time: Approx. 3.5 sec. Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 1963, Maximum height: 100 mm Distance between centers: 500 mm Grinding wheel diameter: 300 mm Maximum grinding wheel speed: 2,825 min-1 Grinding head can be rotated 90° to the left and right Maximum workpiece speed: 750 min-1 Spindle taper MK 4 Tailstock 3-jaw grinding chuck 125 mm Faceplate 160 mm ER 40 collet chuck with 28-piece collet set Bsdpfozxqt Nox Aqwell Fixed center Grinding wheel flange with grinding wheel Wet grinding device

Condition: good (used), Year of construction: 2007, *Description:* Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Made in France. High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* - *Make / Model*: CINCINNATI CA NC 320V 380 Bodpfx Ajzvgn Roqwsll - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement - *Equipment*: Emergency stop, speed chart *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Blsdpfozv Sfbjx Aqwjl Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Bledpjzv Smfofx Aqwel Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2004, operating hours: 4,611 h, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 3,000 rpm, table load: 7,200 kg, number of axes: 3, This 3-axis MTE BF 2200 Bed Type Milling Machine was manufactured in 2004. It features a substantial X-axis travel of 2,000 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a large table size of 2,200 × 1,000 mm and can handle a maximum table load of approximately 7,200 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 2200 machine we have for sale. Contact us for further details. Blsdpjzv Ubrofx Aqwjl • Table size: 2,200 × 1,000 mm Technical Specification Taper Size SK 50

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, controller manufacturer: HEIDENHAIN, controller model: TNC410M, spindle speed (max.): 3,000 rpm, table load: 13,000 kg, number of axes: 3, This 3-axis MTE BF 4200 was manufactured in 2002. It features an impressive X-axis travel of 4,000 mm and Y-axis travel of 1,200 mm, with a robust table size of 4,200 × 1,000 mm and a maximum table load of 13,000 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 4200 bed type milling machine we have for sale. Contact us for further details. Table size: 4,200 × 1,000 mm Technical Specification Taper Size SK 50 Bsdpfjzv Ucvsx Aqwjll

Condition: used, x-travel 2000 mm y-travel 1600 mm z-travel 800 mm control Siemens 840 D boring spindle diameter 150 mm bore spindle turning speed range 4-1500 U/min Feeds, stepless (Y, Z) 1-9999 mm/min Rapid Feed Y, Z, W 10000 mm/min Boring spindle taper ISO 50 Milling spindle taper ISO 60 surface area 1600 x 2000 mm Bledpfx Aqszv Ulkowsl workpiece weight max. 12500 kg total connected load 90 kW weight of the machine ca. 32200 kg

Condition: used, Year of construction: 2015, x-travel 570 mm y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min spindle taper ISO 40 SK quill stroke 127 mm Bsdozv Ul Rspfx Aqwell table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions