Used Case Taper for sale (5,379)

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Gooseneck * with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading Platform * Telescoping loading platform with rear taper of approximately 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approximately 2,850 x 970 x 400 mm (L x W x H) * Wheel recesses with square ladder rails approximately 15 x 15 mm, as well as widening in the lower area * A pair of fixed wheel recesses between the 1st and 2nd axles, approximately 1,610 x 970 x 400 mm (L x W x H) * Incl. 3-part removable galvanized covers over the wheel recesses (W approximately 670 mm), max. point load 5 t/piece. * Recess in the taper and extending into the loading platform to accommodate the excavator arm (approximately 2,900 x 750 x 210/290 mm (L x W x H)) Hjdpfsz Sh H Hex Aqgjfn * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Two-part Steel Ramps * One pair of galvanized two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood flooring approximately 48 mm thick * Ramp with hydraulically extendable and foldable ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length when in the driving position. Kingpin Supports * JOST kingpin supports (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load 50 t) Axles * BPW axles and suspension, 2 axles fixed, 1 axle steerable * Technical axle load: 12,000 kg each * Electro-magnetic reverse locking system via reverse gear and manually activated Air Suspension * with lifting and lowering valve. Axle tool Tires * 235/75 R 17.5 3PMS – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Braking System * WABCO braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets * Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint Finish * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Top coat with 2 layers of 2K topcoat, solid color in R

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Hfodpfx Aqsz N Alwjgsn Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: excellent (used), mileage: 653,168 km, power: 163 kW (221.62 HP), first registration: 03/2013, fuel type: diesel, tire size: 245/70R17.5, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: intarder, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 9,300 mm, total width: 2,600 mm, total height: 3,460 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 7,330 mm, loading space width: 2,490 mm, loading space height: 2,280 mm, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, soot filter, tail-lift, traction control, General information Year of construction: 2013 Technical information Number of cylinders: 6 Engine capacity: 6.693 cc Axle configuration Tyre size: 245/70R17.5 Brakes: disc brakes Front axle: Max. axle load: 4480 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 8480 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Weights Empty weight: 7.916 kg Carrying capacity: 4.074 kg GVW: 11.990 kg Functional Tail lift: Dhollandia, tail lift, 1500 kg Cooling: -30 °C to 30 °C Make of bodywork: Kiesling T1000R Cooling engine: diesel and electric Wall thickness: 10 mm Interior Interior: black Condition Technical condition: very good Visual appearance: very good Number of keys: 2 Other information Cool unit make: Thermo King Cargo space outer length: 733 cm Cargo space outer width: 249 cm Cargo space outer height: 228 cm Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - ATP Certificate - Datarecorder - Heavy duty engine brake Hsdpezaa Dhjfx Aqgefn - Particulate filter - Radio/Cd/Audio system - Side door - Spare wheel - Speed limiter - Standby 380V - Twin wheel axle - Visor = Remarks = VIDEO: DAF LF 45.220 Cooling case GVW 11990 KG Euro EEV ( Euro 5B ) Thermo King T1000R Diesel Cooling Stand-by 380V -25 C / +25 C Internal dimensions of the loading space: L. 733 cm / W. 249 cm / H. 228 cm ( 18 Euro pallets ) Cooling works great Dhollandia Tail lift / LBW / Loading board ( 1500 KG ) Technically in very good condition Cool unit brand: Thermo King

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z: 500 x 450 x 400mm, Table size 500 x 630mm, C axis 360, B Axis -5 / +110°, maximum workpiece diameter 630mm, maximum workpiece height 550mm table load 200kgs, Spindle taper BT40, 19kW Spindle Motor, Spindle Speed 12,000rpm, Heidenhain Control, 30 Station ATC, spindle probe, Swarf conveyor, through spindle coolant Hfjdpfxsz R Nv Hs Aqgon

Condition: excellent (used), mileage: 292,860 km, power: 120 kW (163.15 HP), first registration: 11/2018, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 80 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 7, emission class: euro6, suspension: steel, total width: 2,210 mm, permissible axle load (axle 1): 1,860 kg, permissible axle load (axle 2): 2,250 kg, loading space length: 3,890 mm, loading space width: 2,090 mm, loading space height: 2,000 mm, Equipment: ABS, AdBlue, EBS, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, navigation system, parking heater, power assisted steering, power mirror, seat heater, soot filter, traction control, General information Year of construction: 2018 Registration number: V-438-TK Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Front axle: Max. axle load: 1860 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 50%; Tyre profile right: 50% Hfodpfow N D Rkex Aqgjn Weights Empty weight: 2.680 kg Carrying capacity: 820 kg GVW: 3.500 kg Functional Cooling: -20 °C to 20 °C Make of bodywork: ISONORT V300MAX Height of cargo floor: 100 cm Cooling engine: diesel and electric Wall thickness: 8 mm Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Other information Cool unit make: Thermo King Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - Heated door mirrors - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Stability control - Standby 230V - Vehicle heater = Remarks = VIDEO: Mercedes Sprinter 316 CDI 2.2 CDI 163 HP Euro 6 Isonort Cooling Case Thermo-King V300MAX +20 C / -20 C (Cools, freezes and heats) Stand-By 230V / Day and night cooling Automatic, Cruise control, Air conditioning Climate control, Parking heater / Webasto Internal dimensions: L. 3884 mm / W. 2088 mm / H. 19980 mm Technically and optically in very good condition Cool unit brand: Thermo King

Condition: excellent (used), mileage: 85,691 km, power: 118 kW (160.44 HP), first registration: 08/2020, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 6,800 mm, total width: 2,100 mm, total height: 2,400 mm, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 2,600 kg, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, soot filter, traction control, trailer coupling, General information Year of construction: 2020 Technical information Engine capacity: 2.998 cc Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 2100 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Max. axle load: 2600 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 2.801 kg Carrying capacity: 699 kg GVW: 3.500 kg Max. towing weight: 3.500 kg (unbraked 750 kg) Functional Make of bodywork: JPM Pump: Yes Tipper: Back Maintenance, history and condition APK (MOT): New APK (MOT) upon delivery Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information Hfjdpfx Aex Hqkajqgjn = Additional options and accessories = - Double cab - Heated door mirrors - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Side door - Spare wheel - Toolbox - Twin wheel axle = Remarks = Video of the vehicle in operation: Very neat Iveco Daily 35C16 3.0D Double cab 6-seater Steel tipper Wheelbase 410 cm Transfer case 3.5T tow bar 85,000 km verifiable, very neat

Condition: used, Year of construction: 2002, Control Heidenhain TNC 426 M x-travel 1.350 mm y-travel 1.150 mm z-travel 870 mm Feed ( x / y / z) 0 - 10.000 mm/min NC rotary table 1.100 x 1.000 mm table load capacity 1.500 kg T-slots (number x width x distance) 8 x 18 H12, 1 x 18 H7 x 1 mm spindle tunring speed 12.000 U/min drive capacity - main spindle 100/40% ED 20/24 kW torque 191 Nm tool taper HSK-A63 number of tool places 46 Pos. max. tool diameter 80/130 mm max. tool length 300 mm max. tool weight 8 kg Max. magazine capacity 200 kg Condition: used Technical features & accessories: Hsdpfoz St Syjx Aqgjfn - MTA TAEEVO015 cooling unit - Belt filter - Chip conveyor Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Soco System One Man Packing Station Mobile box erector Carton case sealing machine Top and bottom tape heads Hfodjhlp Nxjpfx Aqgon Model: T-100 380 V, 3 Ph Plastic rollers, roller width: 670 mm Height adjustable legs Total dimensions: 1030 mm x 810 mm x 1660 mm.

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Hfodjrtrx Rspfx Aqgon Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 Hodpfowwaruox Aqgsfn tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Hjdpfxjyf Ncqe Aqgefn Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: used, Year of construction: 1988, x-travel 870 mm y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück Hodpjxlkw Uofx Aqgjfn total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Hodpjxaqa Sofx Aqgjfn Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: new, mileage: 200 km, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 9,250 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, MAN TGS 35.520 8x2-6 BL CH Basic Data ? New MAN Truck Generation ? Euro 6e ? Cab: TN (narrow, long, normal roof) ? Wheelbase: 4,105 mm ? Rear overhang: 1,250 mm * Refrigerator * Auxiliary heater * Sun visor Axles & Chassis ? Front axle: 9,200 kg, tapered, steered ? 2nd front axle: 9,200 kg, tapered, steered ? Rear axle: HY-1350, 13,000 kg ? Tag axle: 9,000 kg, steered, liftable ? Axle ratio: i = 3.08 ? Air suspension on rear axle ? Digital axle load display ? Shock absorbers and stabilizers on all axles Tires ? Front axle/2nd front axle/tag axle: Continental 315/60R22.5 EcoPlus HS3 ? Rear axle: Continental 315/70R22.5 Conti Hybrid HD3 ? Rims: Alcoa Dura-Bright EVO, 9.00x22.5 ? Tire pressure monitoring system TPM Cab ? Cab mounting: Comfort ? Electric glass sunroof ? Central locking with remote control ? LED package Plus ? High beam assistant ? Automatic driving lights ? 2 all-round warning lights, LED, yellow ? Reversing warning ? Climatronic air conditioning ? Water auxiliary heater 4 kW ? Lower bunk with slatted frame ? Multifunction leather steering wheel ? Professional instrument cluster 12.3" ? Digital tachograph with remote download ? MAN Media System Professional Navigation 12.3" ? Advanced sound system with subwoofer Hodez Shh Rspfx Aqgsfn Seats ? Driver's seat package Premium, air-sprung, heated ? Co-driver's seat: un-sprung, adjustable Assistance Systems ? ESP ? ASR? Adaptive Cruise Control ACC Stop & Go ? Emergency Braking Assistant EBA ? Lane Departure Warning LDW ? Lane Change Assist LCS and Turning Assist ? Attention Assistant MAN AttentionGuard ? Front Detection? Traffic Sign Recognition ? Reversing Motion System Paintwork ? Top coat, cab: RAL 5002 ULTRAMARINE BLUE ? Top coat, door extension and steps ? Top coat, fender ? Top coat, bumper ?_____ WIESE superstructure for work platform and construction machinery transport Superstructure dimensions ? Length: approx. 9,250 mm minus storage box in front of the front wall: 500 mm ? Width: approx. 2,550 mm ? Loading height: approx. 1,050 mm unladen Substructure ? Steel welded construction, weight-optimized ? Longitudinal and transverse members made of laser-cut special profiles ? Short transverse member spacing for high point loads ? Rear end sloped for low angle of approach ? Outer frame profile 90° with holes for lashing straps Front wall & floor ? Front wall reinforced, 200 mm below the upper edge of the cab ? Premium front wall with roller shutter ? Storage box, 3-part, inside in front of the front wall ? Grid floor for 5,000 daN wheel load ? Steel sheet boxes with Triflex coating over axles Load securing ? 7 pairs of heavy-duty lashing rings 8 t in the outer frame ? Longitudinal members with Multi-X contour, lashing points 2.5 t ? 7 pairs of heavy-duty lashing rings 8 t in the longitudinal members ? 2 lashing eyes 8 t at the rear, in the center? Outer frame profile with max. lashing holes for lashing straps 2 t * Storage boxes in stainless steel design, right and left adapted to the superstructure contour Ramps WFB 20 S-2 ? Load capacity: 18,000 kg per pair ? Length: approx. 4,360 mm (2,725 mm + 1,635 mm) ? Width: approx. 850 mm per ramp ? 2 single/extension ramps, laterally adjustable ? 2 hydraulic cylinders for opening/closing and extending ? 2 hydraulic cylinders for lateral adjustment ? Surface: non-slip grid profile ? Usable as a loading and unloading ramp ? 1 integrated support foot per ramp? Incl. safety flashing lights ? Tension bar as transport safety device Rear supports

Condition: new, mileage: 10 km, power: 96 kW (130.52 HP), fuel type: diesel, overall weight: 2,400 kg, color: white, gearing type: automatic, number of seats: 2, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Your direct contact: Andreas Kawa, Head of Sales, Commercial Vehicles – Phone: | Email: Special equipment: Load compartment package Worksite package Wooden load compartment floor and side walls Winter package Comfort Connect package Additional equipment: Airbag, passenger side, airbag, passenger side, deactivatable, airbag, driver side, traction control system (ASR), automatic lighting function (Coming Home, Leaving Home), automatic activation for headlights, individual passenger seat, on-board computer, parking assistance system at the rear with parking sensors on the sides, increased payload, driving assistance system: emergency call and assistance system (CITROEN Connect), rear double doors without glazing, rear double doors (opening angle 180 degrees), body/superstructure: box van, head airbag system, load compartment partition without window, model revision, engine 1.5 L – 96 kW diesel FAP, parking brake, electric, wheelbase 2975 mm, safety package, automatic activation for headlights, low emission according to emission standard Euro 6e, sliding door, right side, without window, side airbag, front, side protection strips, black, front left seat, adjustable tilt, seat cover/upholstery: fabric Curitiba, smartphone station, audio controls on the steering wheel, USB connection, digital instrument cluster (10.0 inches), inductive charging cradle for smartphone (wireless charging), special paint finish Ice White/Kaolin White, start-stop system, automatic door unlocking (in case of accident), lashing eyes in the load compartment, auxiliary heater. Hfjdpfxjzy Ttns Aqgen Errors, changes, and interim sales: The information regarding the equipment in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information purposes. Binding equipment features are exclusively subject to the purchase contract.

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display Hfsdpek Dpp Sofx Aqgjn - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: used, mileage: 21,000 km, power: 58 kW (78.86 HP), first registration: 11/1989, overall weight: 3,500 kg, fuel type: diesel, color: red, next inspection (TÜV): 03/2028, gearing type: mechanical, loading space width: 1,730 mm, loading space length: 3,250 mm, loading space height: 1,830 mm, Year of construction: 1989, total length: 5,350 mm, total width: 1,975 mm, total height: 2,700 mm, number of seats: 2, 1st hand – German volunteer fire department vehicle. TÜV (technical inspection) valid until 03/2028. An expert opinion according to §23 StVZO in conjunction with §21 StVZO as a "vintage vehicle, special-purpose vehicle, fire department vehicle, equipment carrier" (for an H-approval) dated 09.03.2026 from TÜV Rheinland is available. Engine oil with filter / brake fluid / 4x glow plugs / windshield wiper blades – NEW – replaced in a specialist workshop in 2026, invoice available. Until recently, it was registered with the original owner, including the original vehicle registration document from 1989. Only 21,000 kilometers driven in total. Very well-maintained Bremen Transporter T1 in the medium-length version with the sturdy, factory-installed metal high roof. Body condition in detail: 2 rust spots (rear right wheel arch and left side panel). The front right wheel arch has already been repaired; otherwise, it is in good original condition all around. Normal signs of wear and tear are present. The underbody is in good condition. This 308 D was explicitly sold to us by the original owner as "accident-free." New winter tires (DOT 2022). High 270-degree rear doors and fog lights, rear axle stabilizer, and reinforced shock absorbers. Otherwise, it is an absolute basic version. No seatbelts. No power steering. No ABS. Simply pure 1980s – back then, they could still build durable, reliable cars. In any case, very little can go wrong here. Engine: OM 601, 4-cylinder naturally aspirated diesel with 79 hp. 5-speed manual transmission. 127 km/h is stated as the maximum speed. When the sliding door is opened, a large step extends mechanically. The vehicle was used by the fire department as an equipment carrier and has some shelving units that can be easily removed when not in use. Conversion manufacturer: Hermann Schmitz KG in 5901 Wilnsdorf near Siegen. Registered as a "Miscellaneous Motor Vehicle, Fire Department Vehicle." Unladen weight 2320 kg (including all fittings). Permissible total weight – original from the factory and unchanged to this day – 3500 kg. This means that this 308 D-KA can be driven immediately with the new passenger car driver's license. The special warning system has already been removed by the fire department before the sale and is no longer available. Hjdjw Tpfujpfx Aqgefn The vehicle runs very well; the transfer journey on the highway was a real pleasure. This offer applies only to commercial businesses and freelancers of any kind and industry, as well as to authorities / emergency services. Unfortunately, we do not sell directly to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net. Taxation according to §25a UStG (German VAT Act) as a municipal vehicle. Therefore, no 19% VAT will be added. At the same time, the VAT cannot be separately calculated from the purchase price.

Condition: new, Year of construction: 2026, OPTIturn TU 2004V - Lathe with stepless speed control and digital speed display Image shows OPTIturn TU 2004V Lathe with stepless speed control and digital speed display Precise machining Sturdy, ribbed prism bed made of cast steel, inductively hardened and precision-ground Hardened and ground bed guide rails Hardened spindle nose (DIN 6350) Guaranteed spindle nose runout accuracy better than 0.009 mm Automatic longitudinal/lead screw drive Hfjdpfx Ajcnxrcjqgjn With longitudinal, cross, and compound slide Right/left rotation selectable on the control panel Emergency stop switch Chuck guard Thrust bearing Lead screw mounted in two sintered bearings Large threading range through change gear set Simple and quick speed change via V-belt Change gear drive EMC filter class B (for use in private households) Equipment details: Digital speed display Easily readable digital speed display Chip guard on the compound slide Four-position tool holder rotatable Roll-formed trapezoidal thread Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scale 0.02 mm Main spindle Hardened and mounted in adjustable precision tapered roller bearings Tapered roller bearings in P5 quality Cylindrical centering socket Hardened spindle nose with Ø 21 mm spindle bore Chuck Runout accuracy better than 0.04 mm Scope of supply: Three-jaw chuck Ø 100 mm, center-mount Fixed center MK 2 Fixed center MK 3 Splash guard Chip tray 4-position tool holder Change gear set Operating tool Model OPTIturn TU 2004V Article no. 3420310 Technical data Electrical connection 230 V / 1 phase ~50 Hz Power of spindle drive motor 600 W Spindle taper MK 3 Spindle bore 21 mm Through-hole three-jaw chuck 20 mm Tool holder mounting height max. 12 mm Center height 100 mm Distance between centers 300 mm Turning diameter max. 200 mm Turning diameter over cross slide 110 mm Bed width 100 mm Spindle speed 150 - 2,500 min-1 Number of speeds 2 speeds, speed electrically adjustable Travel of compound slide 55 mm Travel of cross slide 75 mm Longitudinal feed in range 0.1 / 0.2 mm/rev Pitch - Metric in range 0.25 - 3 mm/rev (14) Pitch - Inch in range 44 - 8 TPI (12) Tailstock mounting MK 2 Tailstock - quill stroke 65 mm Dimensions (L x W x H) 830 x 425 x 360 mm Net weight 61 kg

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm Hfodpfxjqlckpo Aqgsn - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Hsdor Hr Arepfx Aqgjfn Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: new, Original SKF Explorer spherical roller bearing, type 23040 CC/W33, available from surplus industrial stock. The bearing is unused and supplied in its original SKF protective packaging, secured with strapping. Hjdpfx Aoz R Ub Ueqgjfn Technical Specifications: Manufacturer: SKF Series: SKF Explorer Model: 23040 CC/W33 Bearing type: Spherical Roller Bearing Bore diameter: 200 mm Outside diameter: 310 mm Width: 82 mm Weight: Approx. 23.3 kg Design: CC – Two-row spherical roller bearing Lubrication: W33 – Annular groove and lubrication holes in the outer ring Country of manufacture: Sweden Condition: Unused surplus stock Packaging: Original SKF protective case Applications: Suitable for heavy-duty industrial applications, including steel mills, conveyors, gearboxes, mining equipment, and industrial machinery. This SKF Explorer bearing is designed for high radial loads and can accommodate shaft misalignment. Location: Botlek Rotterdam, The Netherlands Delivery terms: EXW (Ex Works) Shipping can be arranged upon request. Please contact us for further information or a quotation.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. Hfodpfxoz Rmn Eo Aqgon About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Binder Temperature Testing Chamber MK 240 Type: MK240-400V The Binder temperature chamber in the MK series is designed for heat and cold tests in the range of -40 °C to +180 °C. The MK is particularly an efficient alternative to custom solutions, especially for cyclical temperature tests. For sale is a Binder temperature testing chamber MK 240 for use in industry, research, development, and quality assurance. Technical data: Temperature range: -40 °C to +180 °C Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Average heating rate: approx. 5.0 K/min (according to IEC 60068-3-5) Cooling time: from +180 °C to -40 °C approx. 110 minutes Average cooling rate: approx. 4.5 K/min Internal volume: approx. 228 liters Maximum load per shelf: approx. 30 kg Maximum total load: approx. 70 kg Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Feedthroughs: 2 x Ø 70 mm Number of doors: 1 Shelves: 2 (standard) / max. 6 Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg Scope of supply Hfsdoy Nicmspfx Aqgen Scope of supply as shown in the images Grid pattern tester with accessories in a transport case Condition Used Optical condition as shown in the images Normal storage and signs of use Important note: All information has been compiled to the best of our knowledge based on the images, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: used, FARO Measuring arm / 3D coordinate measuring arm FARO Prime measuring arm Mobile 3D measuring system / Portable CMM for industrial metrology For sale is a used FARO Prime measuring arm including accessories, transport case, and HP laptop. The measuring arm is suitable for mobile 3D measurements, quality control, component testing, reverse engineering, toolmaking, fixture construction, and industrial metrology. Technical data Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 10.09.2013 Calibration date according to certification: 25.06.2015 Revision: 28.1 Made in Switzerland Measuring range: approx. 1.8 m (6 ft) Axes: 6 Hfedpjzc Erpsfx Aqgon Single point accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Bluetooth wireless technology Integrated battery operation Temperature compensation Portable measuring arm technology USB interface Compatible with multiple probe systems Weight of measuring arm: approx. 9.3 kg Total weight including case and accessories: approx. 35 - 50 kg Equipment Mobile FARO Prime measuring arm Reference sphere / Calibration sphere Measuring probes / Probe set Base plate / Mounting plate Transport case HP EliteBook laptop Software data carrier USB dongle Operating instructions / Manuals Accessories according to pictures Application areas 3D coordinate measuring technology Quality assurance Incoming goods inspection First article inspection Component control Reverse engineering Tool and mold making Fixture construction Mechanical engineering Automotive industry Aerospace technology Condition Used Optical condition according to pictures Scope of delivery as shown in the pictures A complete technical function test has not been carried out Scope of delivery 1x FARO Prime measuring arm 1x Transport case 1x HP EliteBook laptop 1x Reference sphere 1x Base plate Measuring probes / Probe set Software data carrier USB dongle Documents and other accessories according to pictures The table shown in the photos, or other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Vemag hamburger forming system, comprising of: Hedpfx Aqexnyd Ajgefn 1 x Vemag Robot 500 vacuum filler with double-screw feed. Serial number - 128 3767. Date of manufacture - 2008/2009. Maximum filling rate - up to 2,500 kg/h, depending on product. Portion weight range - 5g up to 30,000g. Portion speed - up to 450 portions/min (depending on product, casing, portion size). 1 x Vemag FM 250 Forming Machine. Previously used to form hamburgers. Serial number - 2500328. Forming set - for 80mm diameter burger pucks. Portion weight - up to 300 portions/min (depending on product, thickness, weight). Product weight - 15g up to 1,000g, per portion. Product height (thickness) - 10mm to 100mm, infinitely adjustable (depending on product shape).