Used Chip Conveyor, Mayfran for sale (12,626)

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: Nsdpfx Ajziz S Djgrslg • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Year of construction: 2008, condition: good (used), quantity 1 STK 0 210 mm Njdezy Sbwspfx Agrolg 0 1500 mm weight 135 kg height 1900 mm length 1400 mm width 800 mm Conveyor (for chips / small metal parts). > CE marking present > Fill with oil before commissioning > Gearbox output — flanged drive, cylindrical shaft

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 220 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of slots in tool magazine: 32, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMF 220 linear, manufactured in 2001 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Control system: Siemens 810/840 D Spindle speed range - milling: 20 ~ 12,000 rpm Tool interface: SK 40 Drive power - milling spindle: 35 / 25 kW Tool magazine with 32 positions Table surface area: 2,600 x 600 mm Rapid traverse rate X-axis: 80 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Nedpfx Aezar Sqogrslg Max. tool length: 300 mm Max. tool weight: 6 kg Max. table load: 2,200 kg Chip conveyor IKZ-40 bar Prepared for Renishaw OP60 Total power consumption: kW Machine weight: approx. 12 t Space requirement: approx. 7.0 x 4.2 x 2.7 m

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: Nedpfjy Hp Rrex Agrelg - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: good (used), Year of construction: 2005, operating hours: 32,099 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 5,800 mm, total width: 4,800 mm, table width: 400 mm, table length: 500 mm, overall weight: 12,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,648 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis horizontal machining center from the manufacturer Starrag. The machine is used, has been regularly maintained, and is in fully functional condition. Machine Details - Manufacturer: Starrag - Model: CWK 400D - Year of manufacture: 2005 - Operating hours: 32,099 - Control: Siemens Sinumerik 840D - Machine weight: 12,800 kg - Footprint (LxW): 5.8 x 4.8 m Technical Data Travel paths: - X = 625 mm - Y = 650 mm Nodpfex Ib T Ijx Agrjlg - Z = 650 mm - B axis: 360° (0.001° increments) / 100 rpm - Spindle speed: 50 – 10,000 rpm (stepless) - Motor power: 24 kW / 37 kW - Torque: 250 Nm / 350 Nm Table & Pallets - 2 pallets, each 500 x 400 mm - T-slots to DIN 55201 - Load capacity: 400 kg - Pallet changer included (changeover time 8 s / 5 s) Tool Data - Interface: DIN 69893-HSK-A63 - Chain magazine with 60 tool positions - Tool diameter: 80 mm (up to 160 mm with adjacent pockets free) - Max. tool length: 350 mm - Max. tool weight: 10 kg - Total tool weight: 200 kg Equipment & Extras - Coolant system (emulsion, internal & external supply, approx. 1100 L) - Knoll coolant unit with fleece filter (30, 40, 50 bar) - Measuring probe: Renishaw - Tool breakage monitoring in magazine - Chip conveyor - Flood wash, paper band filter, cleaning gun at setup station - Fully enclosed working area to UVV safety standards - Pallet sequence mode - Network connectivity, Ethernet interface - Technical documentation & layout plan included Maintenance - Carried out regularly - Machine is fully functional All details have been prepared to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: good (used), Year of construction: 2011, operating hours: 41,800 h, functionality: fully functional, turning length: 550 mm, turning diameter: 280 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 2,100 mm, total width: 1,350 mm, quill travel distance: 500 mm, quill diameter: 60 mm, quill stroke: 125 mm, type of input current: AC, torque: 121 Nm, overall weight: 4,000 kg, chuck outer diameter: 225 mm, Equipment: documentation/manual, For sale is a TC400 52MC CNC turning machine from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, built in 2011. It is in good used condition, with 41,816 hours of active operating time, of which 15,048 hours represent machining time. The machine has not been in operation for the last 5 years and was serviced by a Spinner technician in July 2025. It features a tool turret with 12 driven tools, an automatic workpiece removal system with a conveyor belt, a chip conveyor, and 4 foot pedals. The technical documentation in German and English, the wiring diagram of the electrical lines, the service manual, the latest maintenance reports, the original invoice, and several supplementary tool brochures are included in their original form. In addition, various tools are included, which are still functional, some of which have barely been used. Manufacturer: Spinner Werkzeugmaschinenfabrik GmbH Model: TC400 52MC Machine No.: AU0474 Year of manufacture: 2011 Weight: 4,000 kg The detailed technical specifications can be found in the excerpts from the technical documentation in images 2, 3, and 4. The price of the machine includes the machine itself, some tools and accessories, as well as loading onto a truck (a suitable forklift is available). Any shipping or collection must be arranged separately and is not included in the price. The price of the machine is quoted as a net price. If you are interested, please contact us by email, direct message, or by phone. We will gladly send you a current video to demonstrate the machine's functionality upon request. Nodpfxoy Nxd He Agrolg Fitok GmbH, Moritz Hanesch, 07.05.2026, updated 28.05.2026

Condition: ready for operation (used), For sale: conveyor belt as shown in the photos. Nlodpfxsw Alxds Agreg Stainless steel construction. Please feel free to contact me for more information. Possibility of transport.

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Nedpfx Aortrzaegrjlg Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: repair required (used), I am selling the conveyor belt shown in the photos. Please feel free to contact me for more information. Njdpfozx Sxmjx Agrolg

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. Nljdpfx Agjzxz Dforjg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe Nledpfxez Ea Sxe Agreg • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: used, Year of construction: 2001, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 47 kVA, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,700 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Chiron FZ 15K S machine, manufactured in 2001. Nljdpozyyqyjfx Agrjg CNC control: Fanuc Series 18i 2-axis rotary table (A and C axes) 48-position tool changer Chip conveyor Coolant unit X-axis travel / X-axis stroke: 550 mm Y-axis travel / Y-axis stroke: 400 mm Z-axis travel / Z-axis stroke: 360 mm C-axis / C-axis: 360° A-axis / A-axis: +-100° Spindle taper: HSK A63 Weight: approximately 8700 kg Spindle speed: 20-12000 rpm If you have any questions or require further information, please send a message or contact us by phone.

Condition: good (used), For sale: a 6-meter conveyor belt, ready for operation. ✅ Length: 6m ✅ Belt width: 0.4m ✅ Transportation can be arranged ✅ Large selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs. Nljdpfx Ajz Andtjgrsg

Condition: good (used), For sale: a 6-meter-long conveyor belt, ready for operation. ✅ Length: 6m ✅ Belt width: 0.4m ✅ Transport can be arranged ✅ Wide selection of conveyor belts available on site Nledpfx Agoz Aphgerog Please contact us. We will help you choose the right conveyor belt to meet your needs.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. Nljdpfozzdh Eox Agrsg The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Condition: used, Year of construction: 2013, Technical details: band width: 600 mm conveying height: C= 1800 mm voltage: 460 / 60 V / Hz total power requirement: 3,5 kW weight of the machine approx.: 2300 kg dimension machine xH: ca. G= 8,45 x F= 1,35 x 3,0 m Slat-band chain conveyor With coolant tank incl. pump output 250 l/min. sufficient for a conveying height of 25m. Very good little used condition. Chip intake length Ax= 3000mm (attachment with sheet metal tray with rubber coating 3000 x 1100mm) Total infeed length 5000mm The chip conveyor has 4x pivoting wheels underneath and can be bolted to the floor. * Nlodpfx Asu Nupqjgrsg

Condition: used, Year of construction: 2013, Technical details: band width: 600 mm voltage: 460 / 60 V / Hz total power requirement: 3,5 kW weight of the machine approx.: 2300 kg dimension machine xH: ca. 9,0 x 1,4 x 3,0 m hinged type chip conveyor, as good as new With coolant tank incl. pump (submersible centrifugal pump) Delivery rate 250 l/min. = sufficient for a conveying height of 25m Nodpfx Asu Nupdogrelg Chip insertion length (A) 3000mm (attachment with sheet metal tray with rubber coating 3000 x 1100mm) Total insertion length 5000mm Belt width (H) 600mm Discharge height (C) above floor 1800mm The chip conveyor has 4x swivel wheels underneath and can be fixed to the floor with bolts. *

Condition: excellent (used), Year of construction: 2004, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex 200 MkIII • Control: Mazatrol PC Fusion 640 MT Pro • Year: 2004–06 • Serial No.: 169996 • Network: LAN connection • Condition: The machine is in very good technical condition and has been very well maintained. • Mainly used for machining aluminium and plastic. • Max. turning diameter: 530 mm • Max. turning length: 1,000 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 580 mm • Y-axis: 160 mm • Z-axis: 1,045 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW • C-axis: 360° full interpolation Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant B-axis • Angular range: -30° to -190° • Full indexing Tooling and Magazine Nlodpfxezwhdco Agrog • Tool magazine: 40 positions • Tool measuring arm: Yes • Tailstock: MT5 Auto • Chuck: Kitagawa B-210, 10-inch 3-jaw chuck • Collet chuck: SMW AUTOBLOK KSB-MB-A60 • Smartshift BASE quick coupling for robot • Parts catcher: Yes • Parts collector: Yes • Chip conveyor: Mayfran • Bar feeder: STC Super 65 Included Documentation • Photos of the machine • Video of the machine in operation • Service history (photo) • Manuals • Electrical diagrams • Complete machine manuals • Complete programming manuals • Complete maintenance manuals Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 1,000 mm length • 40 tool positions • Through-spindle coolant • Integrated robot interface (Smartshift BASE) • STC Super 65 bar feeder

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Nljdpez A A Dxjfx Agrjg Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: repair required (used), I am selling the conveyor belt shown in the photos. Please feel free to contact me for more information. Nodpfx Agezxc Nverslg

Condition: used, Year of construction: 2010, Technical details: weight of the machine approx.: 1400 kg dimension machine xH: G= 6,6 x 0,9 x 3,8 m total power requirement: 0,75 kW Made of sturdy sheet steel construction. This is a scraper belt conveyor. Drop-in width: F1= 480mm; Drop-in length: 750mm Ejection: height H = 3200mm Infeed (underfeed to the machine): height = 300mm + superstructure B= 370mm = 670mm and width F= 580mm and length A= 2230mm The chip conveyor is to be positioned stantionary. * Nljdpju Nun Hsfx Agreg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, overall weight: 7,600 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Nlodsz Apduepfx Agrjg X-axis travel: 300 mm Z-axis travel: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Torque at 40% duty cycle (ED) max.: 630 Nm Torque at 100% duty cycle (ED): 420 Nm Number of tool positions in tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg MACHINE DETAILS Control system manufacturer: Siemens Spindle power at 40% duty cycle (ED): 33 kW Spindle power at 100% duty cycle (ED): 22 kW Electrical connection: approx. 50 kVA Mains connection: 400 V Frequency: 50/60 Hz Dimensions & Weight Dimensions with chip conveyor: approx. 5,300 × 1,900–2,200 × 1,700–2,000 mm Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), For sale: a conveyor belt, 15 meters long, ready for operation. ✅ Length: 15 m ✅ Width: 0.65 m ✅ Transportation can be arranged ✅ Large selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs. Nlsdpfx Agozc D T Sjrjg

Condition: used, Year of construction: 2007, Technical details: conveying height: C=900 mm total power requirement: 2,8 kW dimension machine xH: ca. G 8,4 x 2,1 x 1,3 m Slat-band conveyor very good, little used condition. Cooling water tank 1300 x 2050 x 260mm discharge length D=500mm Total chip intake length approx. AX= 4120mm with sheet metal tray with rubber coating, width 230mm each (plus chip intake extension approx. 1720mm covered with profiled sheet metal). Chip intake width F1=620mm Insertion height approx. B=380mm Njdpfsu Nup Rjx Agrelg The chip conveyor has 3x pivoting wheels underneath and can be bolted to the floor. *

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. Nsdjzwbxyjpfx Agrjlg The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.