Used Clevertech Complete Palletiser Line for sale (21,252)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Njdez D S Sbepfx Agrsdb Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. Ndodpfx Agoz Azx Rerjb 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.

Condition: good (used), functionality: fully functional, For sale: a log feeding line with a turner (Interlog AB). The complete line includes: Log feeding conveyor, length 43 meters Ndodpfx Agjz Az Awerjb Metal detector Log conveyor Log turning device Log dropping conveyor Hydraulic unit and hydraulics All existing electrical and electronic equipment belonging to the line The line has been dismantled and packed into transport packages (a total of 3 loads). The individual components can also be sold separately. The line is located in Sweden. Please contact us, and we will gladly answer your questions and provide you with a good offer!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0700922, input voltage: 400 V, type of input current: three-phase, KÖNIG ECO TWIN 800 WITH CLASSIC REX T6/5S SK58 – 2018 Ndodjzyv Nrspfx Agreb Complete König line for the automatic production of rolls and bakery products. Year: 2018 The line consists of a König Classic Rex T6/5S dividing-rounding machine combined with an Eco Twin 800 pre-fermentation and shaping line. Features: * Manufacturer: KönIG * Model: Eco Twin 800 * Year: 2018 * Dividing head: Classic Rex T6/5S * Piston size: SK58 * Weight range: 35 to 85 g * Operation in 5 or 6 rows * Nominal width: 800 mm * Eco Twin capacity: * Up to 5,040 pieces/hour in 6 rows * Up to 4,200 pieces/hour in 5 rows * Maximum capacity of the Classic Rex head: * Up to 9,000 pieces/hour in 6 rows * Up to 7,500 pieces/hour in 5 rows * Integrated pre-fermentation * Siemens Simatic control * Integrated elongation roller * Automatic product depositing onto baking sheets * Several interchangeable stamping tools available * Quick tool changes * Cutting/stamping station depending on configuration Products that can be produced: The line allows for the production of a wide variety of rolls, including: * Round rolls * Stamped rolls * Kaiser rolls * Cut rolls * Elongated rolls * Elongated and cut rolls * Elongated and stamped/pressed rolls * Double rolls * Various special shapes depending on the stamping tool used Several stamping tools are available with the line. The Eco Twin is a compact and versatile line that allows for the production of a wide variety of products with quick changeover times. Machine can be viewed and tested by appointment. Photos, videos, and additional technical information available upon request. Photos taken before cleaning.

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Nsdpfx Agszhifieredb Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter Njdpfxoxw Ux Ho Agrsdb drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, We offer an very special development line of water transfer printing with complete know how of CUBIC - JAPAN EQUIPMENT CAN BE USED FOR ALL KIND MATERIALS, PLASTIC, WOOD, METAL AND OTHER.... Nsdpfxjvk Ev Hs Agrsdb Specifications Manufacturer COLOR DEC Model ITALY-CUBIC LAB 2000 Year 1996 Condition Used COMPLETE CUBIC PLANT- 3D WATER TRANSFER PRINTING EQUIPMENT LOOK ATTACHED PHOTOS Include complete production equipment for 3D watertransfer print. -washing machine -transport system for clean room -clean room humidity device -storage for the CUBIC FILMS - heating-drying cabine for lack drying -bath with halfautomatic floating system- possiblle to make more parts at once, depende from the size of printing parts Equipment is in perfect working condition, ready to use. FOR ADDITIONAL PHOTOS WE CAN SEND BY EMAIL. ALL DOCUMENTATION WILL BE PRESENT TO BUYER.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021 ! Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Ndedpfxozfbi Io Agrob Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 2019, REF: MM6469 Ndodjzp E Sbepfx Agrob Complete tube filling and sealing system, comprising of the following equipment: 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2188, input voltage: 400 V, product width (max.): 1,500 mm, SWAH LCP-01 A high-performance, automated production line for the manufacturing of rectangular ductwork. The SWAH LCP-01 is a robust European system designed to transform coil material into finished, reinforced rectangular duct sections with maximum efficiency. Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model: LCP-01 • Year of Manufacture: 2003 • Serial No. (M. No.): 2188 • Application: Fully automated production of rectangular ducts from coils. This line is a complete system, including • 4 Decoilers Station: To hold and feed heavy sheet metal coils (allowing for quick changes between different material thicknesses or widths). • Straightening & Leveling Unit: Ensures the sheet metal is perfectly flat before processing. • Beading/Stiffening Station: Automatically forms longitudinal stiffening ribs (V-profile) to ensure the structural integrity of the rectangular ducts. • Automated Notching & Cutting: High-precision hydraulic system for cutting to the exact programmed length. • Folding/Bending: Processes the material for easy "L" or "U" shape formation or full duct sections. • Material Thickness: Galvanized Steel: 0.4 mm – 1.2 mm Stainless Steel: 0.4 mm – 0.8 mm Condition & Availability • Status: Fully operational and in good working condition. Nodszbh Auspfx Agredb • Ready for delivery

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Ndedswu Aa Nopfx Agrjb Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Nedpjz D Taaefx Agredb Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors Nodpfx Agjzg Epujrjdb • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length Nedpsz Dv Uysfx Agrsdb - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KRONES SPIRIT / WHISKY COMPLETE FILLING LINE CONDITION IS EXCELLENT 500 BPM 700ml / 750ml / 1000ml YEAR 2003 KRONES ISOFILL VARIOJET 108 HEAD FILLER - 72 HEAD RINSER Nsdpfxjzn N T He Agrjdb ZALKIN 18 HEAD CAPPER KRONES TOPMATIC LABELLER KETTNER CASE PACKER / DE-PALLETISER / PALLETISER PLUS MUCH MORE PRICE GBP £155,000.00 EXW CONACT INDASSOL NOW FOR DETAILS

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Nodpfx Agez D Dxgerjdb Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Njdpfxezuukqs Agrjdb Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line Ndodep T Tghjpfx Agrjb

Condition: used, Year of construction: 2017, Overview Ndedpfsz Dtymjx Agrsb Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Ndodey Tp Sispfx Agrob Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Ndsdpfx Aoy Ua Rxjgrob Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Nedpfozp Hbqex Agrodb Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Nodpfeyz Ia Isx Agredb Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me.

Condition: used, Second-hand SAC window production line comprising: - Automation - SAC Type P5 (left-hand) - SAC Type P5 (right-hand) - SAC Type T400 - Window tool set IV 72/92 for sashes Nodpfx Ajz Dttysgrsdb Technical data: - On request

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun Ndjdpfx Agjx H Tadoreb - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel