Used Cordia Column Drilling Machine for sale (67,219)

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Kedpezcnnaefx Anwjdn Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, operating hours: 3,800 h, functionality: fully functional, Good morning, I am selling a complete set ready for drilling operations: - Vermeer D7x11a horizontal drill, 2003, ~3800 operating hours. It underwent a major overhaul a few years ago, has almost a full magazine of Hunting drill rods, and is in very good technical and visual condition. - Vermeer mixing unit with a 120 l/min bentonite pump, 2003. Tank capacity: 1200 l. - Iveco Eurocargo 100E18 E5 truck, 2012, ~290,000 km. Equipped with an additional tank (1100 l), shelving, a water transfer pump, a water filling system, a Cintropur filter, tool holders, and a custom-made external aluminum toolbox. Aluminum ramps are also included. The vehicle has undergone a full service at an authorized Iveco workshop. Oils, filters, front and rear brakes, new headlights and windshield, and new batteries have all been replaced. The vehicle is in excellent condition. - An additional D7x11a drill for parts - the machine is practically complete, missing only a few elements and parts. The engine is in working order. I will include a starting drill rod, a drilling head, a locking sleeve, and 3 reamers (90-230 mm) with the drill. Kjdpfx Anszd Ribjwodn The set is currently used only occasionally, but it is ready for operation at any time.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 891149, 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Kdjdpezcg Ifjfx Anwen Depth adjustment from 0 to 80 mm

Condition: excellent (used), functionality: fully functional, Models BM5139 Hang 107-30 electronic professional - 4-Head BM5138 Urbaniak - 2-Head BM5105 Hang Piccolo eye letting machine BM5137 Hang Cito Borma 54S - 1-Head BM4822 Hang 136D - 2-Head BM4434 Hang 106-T25 - 1-Head BM3196 Hang 106DT20 2-Head Further details on request Kdodpetuwa Isfx Anwon

Condition: excellent (used), machine/vehicle number: M100037, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 45 mm, spindle mount: MK 4, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 2,650 rpm, rotational speed (min.): 30 rpm, total width: 900 mm, total length: 1,900 mm, total height: 2,200 mm, table width: 760 mm, table length: 1,120 mm, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: CE marking, CARIMATI CTU 40/45 x 1000 radial drill press in excellent overall condition, fully functional machine, tested and ready for use. Key features: drilling capacity 45 mm Morse taper MK4 spindle speed 30 – 2650 rpm automatic feeds 0.05 – 0.3 mm/rev spindle stroke 250 mm table stroke on column 1000 mm power supply 400V three-phase complete with chuck, vise, and quick-change chuck column and head locking coolant system machine complies with CE standards Transportation is the responsibility of the buyer. Loading onto the truck will be carried out by us. Kdjdpfx Anjzdqklewon If customized/tailor-made packaging is required for transport, the related cost will be borne by the buyer. Machine sold as is, with no warranty.

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 Ksdem Twc Tspfx Anwjdn > year99 > With Heidenhain TNC 426 > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position > Drive power 28 kw > Weight 12 to

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Kodpfxjyl Idao Anwsdn Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle Kdodemnntmepfx Anwon - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Ksdpfetzctmsx Anwjdn Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Weeke through-feed drilling machine BST 500, with drilling heads on the right and left sides, 5 units underneath, none above. Kjdpfezb El Hsx Anwodn 5 drilling machines in stock, sold individually.

Condition: used, Year of construction: 2020, total height: 2,100 mm, total length: 2,000 mm, total width: 2,500 mm, Colour: Grey Price: On request - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 975 - Working range Y [mm]: 1321 - Working range Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling unit: Yes - Software: Biesse works - Saw unit present: Yes - Safety feature: - Spindle speed control: Variable - Voltage [V]: 400 Kjdpfx Anjx Ad R Newjdn - Current consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC-Steuerung Control: Heidenhain iTNC 530 Storage location: Halberstadt Kdjdpfjzc Dzpsx Anwjn Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) Kodpox Hfh Tsfx Anwedn - Main vertical spindle (milling unit) 7.5kW - Automatic revolver-type tool change system, 10 positions Available revolver units: 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) 5. Milling 6. Milling 7. Milling

Condition: defective spare-parts repository (used), Year of construction: 1971, machine/vehicle number: 9604, functionality: not functional, tool diameter: 50 mm, spindle mount: MK 5, rotational speed (max.): 1,700 rpm, total width: 1,100 mm, total length: 2,600 mm, total height: 3,500 mm, overall weight: 4,000 kg, Function: Turret hub defective (does not move up or down) Drilling capacity (steel): 50mm Speed: 1700 rpm Overhang: 45mm - 1500mm Workpiece height range: 470mm - 1500mm Sleeve travel: 680mm, quill travel: 350mm Spindle mount: MK5 Max. tool weight: approx. 30kg Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm Weight: approx. 4000kg An on-site inspection is possible. Kedpfx Ajzcqcmonwsdn

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Kdsdpfxoyry Rfj Anwon Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 1962, x-travel 6300 mm y-travel 2200 mm workpiece height 1835 mm Table area 6000x1835 mm Rest 2 Side head 2 number of T-slots 7 T-slot - distance 240 mm T-slot - width 28 mm bed length 14650 mm column daylight 2075 mm feed 5-60 m/min workpiece weight 15000 kg weight of the machine ca. 55 t dimensions of the machine ca. 14,65x4,37x4,05 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Kdodpfx Ansyqud Dowon If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Kdedjzdqttspfx Anwjn Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 24 Total number of tool changer positions: 16

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min column diameter 350 mm voltage 400 V Kjdpezcqyfsfx Anwsdn total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: used, drilling capacity: 23 mm, Equipment: type plate available, Fast radial drilling machine – bench drilling machine Donau Werkzeugmaschinen DR23 radial drilling machine Serial number 2062-4 Operating voltage 380 volts with neutral conductor, 50 Hz, 3-phase Drilling capacity: up to approx. Ø 50 mm Speed range 58 - 1275 rpm Threading device, overhang 920 mm Machine lamp Kedpfx Anowybqqswedn Base plate, table size approx. 1100x400 mm Motor power approx. 1.5 kW, without coolant system 2 T-slots at the rear left Weight: approx. 1,200 kg The arm can be swivelled, adjusted in height, and moved in length and depth. At the push of a button, the desired position can be fixed by swiveling, pulling, and pushing. An inspection while the machine is running is possible after prior appointment. Price negotiable. Our asking price is €1,680.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and omissions. Sale only to countries within the EU.

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling?  No CNC knowledge is required thanks to a user-friendly interface. Kdodpozdb Nmefx Anwon  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation.  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability.  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? The MDX center is a robust, clearly structured machine with minimal follow-up costs. An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Condition: used, table width: 695 mm, table length: 1,200 mm, BOHNER & KÖHLE Knee-Type Milling Machine / Router, used, equipped with: rotary table, clamping surface approx. 1,200 x 695 mm, milling spindle with 1.5 HP, speed range: 700, 1,400 and 2,800 rpm. Kdodpfjzdrn Sox Anwen The bevel gear, which can be seen in picture no. 5, is not included in the scope of delivery! Technical specifications: weight approx. 3000 kg dimensions (l x w x h) approx. 2400 x 2300 x 2750 mm.

Condition: used, Display unit Condition: Like new Included in delivery: Kdjdpfeyamc Djx Anwon Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Kdjdpfsv Ntb Iox Anwon Bit This item is an unused display unit.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Kdedpfx Asw Rhk Renwsn Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 Ksdpfx Anot Rkcuswodn travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000