Used Cormak Mp140 Workshop Washer for sale (7,426)

Condition: used, functionality: fully functional, machine/vehicle number: 33142, mileage: 33,900 km, power: 335 kW (455.47 HP), first registration: 11/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, KROLL superstructure with water recovery: The mileage of the offered vehicles may vary, as some vehicles are currently being rented! Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, engine brake, gearbox lock for auxiliary drive, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assistant, attention assistant, Active Sideguard Assist, starting aid, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable, liftable and load-relieving 9 t trailing axle, axle load measuring device, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: 1st and 3rd axles 385/65R22.5, 2nd axle 315/80R22.5 Kdedpfx Ago Aaz Scj Aeu Total tank volume 14 m³; closure bottom over the entire cross-section of the tank, which can be opened upwards with 2 hydraulic cylinders; lid locking with clamping claws, hammer-head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder; the unlocking can only be done under vacuum; level indicator: with 2 internal floats and an external scale; calibrated in 500 l steps for each piston position; discharge chute made of aluminum; emptying via pneumatically operated piston; piston with manhole DN 450 mm; tank division: locking of the pneumatic piston manually in 3 different positions; vacuum pump: VacuStar WR 2500 (2,500 m³/h at 400 mbar), water-cooled, mechanically driven via cardan shafts, lower and upper suction and discharge connections DN 100 with Perrot M coupling and blind cap, pneumatically operated; suction hose cassette with telescopic boom DN 125: the boom arm can be telescoped hydraulically up to 2,000 mm; the telescopic boom can be swiveled 180°, either together with the high-pressure hose reel or, after releasing a pneumatic lock, also independently of the high-pressure hose reel; the in- and out-movement of the suction hose is carried out hydraulically; incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling; sludge water drain DN 80; high-pressure pump: URACA P 3-45 (approx. 348 l/min at 205 bar), drive mechanically via cardan shafts, pipelines/fittings: water filling via a Storz-C connection; water pressure can be adjusted continuously; large HD hose reel: hydraulically swiveling 180°; hydraulically driven; speed adjustment continuously adjustable; pressure line to the reel in DN 32 mm; sewer cleaning hose: DN 25 mm - 240 m long; small hose reel: hydraulically driven with 60 m HD hose DN 13 mm; spray gun for max. 200 bar operating pressure; low water warning system; residual water emptying pneumatically via the compressed air system of the chassis; water recovery system "Kroll Recycling System WRS 1", all working functions fully automatic combined operation of suction and high-pressure cleaning, variable water and sludge chamber, emptying by discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention; rotating beacon mounted on the rear of the vehicle at the top; halogen work spotlights; removable and swiveling with 20 m cable; ambient lighting: 4 LED spotlights (one each on the right and left and on the boom); switchable from the control panel; control panel: mounted on the rear right of the superstructure and on the high-pressure hose reel; stainless steel with louver; illuminated; radio remote co

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, operating pressure: 210 bar, empty load weight: 175 kg, warranty duration: 6 months, temperature: 98 °C, KARCHER HDS 1000 BE PETROL HOT WATER WASHER Manufactured in 2021 The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. NEW 12V 50Ah starter battery. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient HONDA GX390 petrol engine ensures stable operation even during prolonged use. With operating parameters of 210 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Kdodpfjya Aziex Ag Asu Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Pumping capacity (l/h): 450 - 900 Operating pressure (bar/MPa): 40 - 210 / 4 - 20 Max. water supply temperature (°C): 80 - 98 Fuel consumption (kg/h): 5.6 Engine type: GX 390 Engine manufacturer: HONDA Weight (kg): 175.7 Dimensions (L x W x H) (mm): 1100 x 750 x 785 EQUIPMENT: NEW 12V 50Ah STARTER BATTERY NEW durable German R+M pressure gun NEW stainless steel pressure lance NEW 10m reinforced steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE HIGHEST FEATURES FEATURES: Open oil system - no operating time limits Highly readable and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, This listing is for 1 of 2 Mikura Autura 1000 Microplate Washer Kdodpfexzg Axex Ag Asu The Mikura Autura 1000 is an automatic microplate washer designed to wash and fill 96-well and 384-well microplates (including deep well formats) for biochemical and immunological assays. It’s engineered for reliable, repeatable performance with high precision and adaptability for a range of workflows

Condition: excellent (used), KronenDouble pass flume system 1 x All s/s Kronen flume washer model GEWA 3800V with vibration outfeed. Overall length approx. 3.4 m 1 x Kronen flume washer type IA-T 2600/3800. Water wheel type system with vibration table. Overall dimensions approx. 4.2 m long. Can sell separately or as a system. Kedpfx Aox Tf Nqsg Asdu

Condition: new, Year of construction: 2026, CORMAK TH410S Thickness Planer with Spiral Cutter Head The CORMAK TH410S thickness planer with a spiral cutter head is an advanced woodworking machine designed for professional users who require maximum precision, durability, and operating comfort. The spiral cutter head equipped with 72 replaceable carbide inserts provides exceptional surface quality, significantly quieter operation, and lower consumable wear compared to traditional straight knife cutter heads. Main advantages of the CORMAK TH410S thickness planer with spiral cutter head Spiral cutter head with 72 inserts – ensures smooth cutting, reduces vibration and noise by up to 50%, and provides significantly longer service life compared to conventional straight knives. Replaceable carbide inserts – individual segments can be rotated or replaced when worn or damaged, reducing operating costs. Ground cast iron table – provides optimal material sliding and stable workpiece guidance. Three feed speeds – allows adjustment of the processing speed according to the type of wood and production requirements. Digital height indicator – enables precise thickness adjustment with accuracy up to 0.1 mm thanks to the indicator mounted on the handwheel. Chain drive system – ensures smooth and precise material feeding through the machining zone. Advanced safety features – compliance with occupational health and safety requirements and technical documentation standards ensures safe operation. Design and technology The CORMAK TH410S thickness planer is based on a robust steel and cast iron construction, providing high rigidity and resistance to vibration. The 95 mm diameter spiral cutter head is equipped with 72 carbide inserts arranged in a spiral pattern, ensuring continuous cutting and eliminating the risk of tearing wood fibres, even when processing hard and resinous wood species. The extraction and sound-insulating cover provides quick access to the cutter head and simplifies maintenance operations. Precision and working efficiency With a planing range from 5 to 230 mm and a working width of 410 mm, the machine enables processing of both thin boards and thick structural elements. The cutter head speed of 4050 rpm and powerful 3.0 kW (S1) motor ensure high performance even during intensive operation. The use of a spiral cutter head allows achieving a high-quality surface finish without the need for additional sanding, significantly reducing preparation time before further processing. Standard equipment Spiral cutter head with 72 carbide inserts Digital thickness adjustment indicator Feed drive with chain transmission Extended table with support rollers Sound-insulated dust extraction cover Complete safety guards compliant with technical documentation and workplace safety standards Technical specifications Parameter Value Thickness planing width 410 mm Thickness adjustment range 5–230 mm Planer shaft diameter 95 mm Number of knives (spiral inserts) 72 pcs Planer shaft speed 4050 rpm Feed speed 6 m/min Dust extraction connection Ø100 mm Kdsdpfx Agox Dlp As Asu Motor power 4.2 kW Motor power S1 100% duty 3.0 kW Voltage 400 V Extraction outlet diameter 100 mm Gross weight 263 kg Dimensions Parameter Value Width 1110 mm Depth 710 mm Height 1020 mm Table size – width 930 mm Table size – depth 410 mm

Condition: used, Year of construction: 2020, Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Technical data  - Capacity: 12 kegs/hour - Cleaning stations: 2 - Heating: Steam Kdodpfxsxcul De Ag Asu - Formats: S-type kegs

Year of construction: 2002, condition: used, This listing is for a Lancer Washer Infeed Type 1600 PCM DPSS The unit is in full working condition and is ready for immediate release. Lancer 1600 PCM Stainless Steel Washer Overview The Lancer Washer Infeed Type 1600 PCM DPSS is a superior pharmaceutical production washer designed to exceed all GMP requirements Ehret Technologies – Trio-Tech International. This industrial-grade washing system is specifically engineered for pharmaceutical and laboratory applications where stringent cleaning standards are essential. Key Features Designed to provide an adequate cleaning process using mechanical, thermal and chemical cleaning properties ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Multi-level washing capabilities for maximum efficiency GMP (Good Manufacturing Practice) compliant design Pharmaceutical-grade construction and validation Chamber Specifications Internal chamber dimensions: 33 5/8"H × 27 3/4"D × 27 3/4"W ETO Sterilizer - Fully Automatic ETO Sterilizer, Hospital Sterilizer Manufacturer Large capacity design for high-volume processing Multiple rack positions for flexibility Construction & Materials 316L Stainless Steel Construction: Pharmaceutical-grade stainless steel throughout for corrosion resistance and easy sanitization cGMP Compliant: Meets current Good Manufacturing Practice requirements Robust Design: Built for continuous industrial use in demanding environments Kedpfoxhfkujx Ag Aodu Control System Microprocessor-controlled operation Multiple programmable wash cycles Process monitoring and documentation capabilities Applications Pharmaceutical manufacturing equipment cleaning Laboratory glassware and instrument washing Medical device processing Research facility applications Biotechnology equipment cleaning Technical Specifications Model: 1600 PCM (Pharmaceutical Cleaning Module) Construction: 316L Stainless Steel Compliance: cGMP, FDA regulations Operation: Automated wash/rinse/dry cycles Chemical Integration: Automated detergent and rinse aid dosing Validation: IQ/OQ/PQ documentation available Benefits Ensures consistent, validated cleaning results Reduces manual labour and contamination risk Meets strict pharmaceutical industry standards Large capacity increases throughput Automated operation improves efficiency and traceability This washer represents Lancer's commitment to providing pharmaceutical-grade cleaning solutions that meet the most demanding industry requirements for cleanliness, validation, and regulatory compliance.

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) Kdjdpfx Agsxhgd No Aju 230V (single-phase, 2.8 kW)

Condition: new, Year of construction: 2026, Model CORMAK BS370SA – Modern Automatic Band Saw for Metal The CORMAK BS370SA model is a modern automatic band saw designed for efficient series cutting of pipes, profiles, and solid materials with various geometries. Its robust construction, full automation, and high cutting accuracy make this machine ideal for use in production plants, tool workshops, and metalworking companies where repeatability and reliability are essential. Key Features of the Machine Automatic cutting cycle: clamping, material feeding, cutting, and arm return are all performed without operator intervention. Angle cutting capability across the full working range – up to 45° to the left and 60° to the right. Inverter-controlled band speed adjustable smoothly between 5–90 m/min. Hydraulic control of the arm and vise, ensuring precision and user comfort. Material feed system equipped with a 2450 mm roller conveyor, 370 mm feed per cycle, and ±0.2 mm accuracy. Controller with operator panel: allows programming of cutting parameters, monitoring part quantity, and error signaling. Construction and Technology The CORMAK BS370SA band saw is built on a rigid welded frame, ensuring operational stability and vibration reduction. The hydraulic feed and clamping system, precision blade guides, and stepless speed control guarantee high quality and safe operation. The machine is equipped with a roller conveyor to facilitate automatic material feeding. Kdsdpexiv Hcofx Ag Aeu Precision and Performance Thanks to high-quality components and modern technical solutions, the CORMAK BS370SA band saw delivers repeatable and precise cuts. Adjustable cutting speed and hydraulic blade pressure ensure long tool life and full control over the machining process. Applications This machine is recommended for facilities involved in serial production, processing of steel, aluminum, and non-ferrous metal components. It is especially suitable as a band saw for pipes, profiles, and solid parts in the steel structure, prefabrication, and precision manufacturing industries. Standard Equipment Control console on a separate pedestal Hydraulic control of the vise and arm Roller conveyor for automatic material feeding Arm position memory Blade cleaning brush Cooling system with pump Bimetal band saw blade CE declaration of conformity and operation manual Technical Specifications Main motor power 1.5 kW (400 V) Hydraulic motor power 0.75 kW (400 V) Blade dimensions 3160 x 27 x 0.9 mm Cutting speed (stepless) 5–90 m/min Saw frame rotation angle Up to 60° Workpiece Cutting Capacity Angle Round ● Square ■ Rectangular ▅ 90° 270 mm 260 mm 370 x 220 mm 45° 240 mm 180 x 180 mm 240 x 160 mm 60° 160 mm 100 x 100 mm — Machine Dimensions Length: 3970 mm Width: 1850 mm Height: 1763 mm Net weight: 770 kg Gross weight: 925 kg The machine is also equipped with an additional roller conveyor: Length: 2450 mm

Condition: good (used), Year of construction: 2002, 040 USED Semi-Stal tunnel basket washer. EXTERNAL DIMENSIONS (in cm.): - H: 230, - W: 250, - L: 1150. Kjdpfx Agsvy Uxij Asdu WASHING BASKET DIMENSIONS (in cm.): - W: 40, - H: 20-25. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2026, The KDP220TOP blasting cabinet is an industrial sandblasting machine designed for professionals looking for a precise, safe, and efficient solution for surface treatment. Thanks to its top-opening design with telescopic cylinders and a spacious working chamber, this model is ideal for blasting wheels, engine components, hinges, and steel structures. The integrated DC23 dust extraction system ensures a clean and comfortable working environment in industrial conditions. Main Advantages of the Machine Top-opening cabinet with telescopic cylinders – makes loading heavy and large components easier. Efficient working chamber – provides 220 litres of internal volume. Professional blasting gun with four interchangeable ceramic nozzles (4, 5, 6, and 7 mm). Dust-free operation – thanks to perimeter seals and an effective dust extraction system. Wear-resistant integrated working gloves – provide safe and comfortable operation. Efficient internal lighting system – improves visibility during blasting operations. Compatible with various abrasives – including corundum, quartz sand, glass beads, and abrasive granulates. Blasting hose located in the lower part of the tank – improves ergonomics and ease of use. Kdjdpfjvzqf Uex Ag Aeu Construction and Sandblasting Technology The KDP220TOP blasting cabinet is a robust steel construction designed for intensive industrial use. The upper lid supported by telescopic cylinders simplifies loading and unloading operations, while the large front door with a rubber perimeter seal ensures excellent chamber tightness. The viewing window measuring 540 x 250 mm, equipped with replaceable protective films, provides a wide working field without blind spots. The interior features a stable support grid and efficient lighting, allowing precise control of the cleaning process. Dust Extraction System – DC23 The integrated DC23 dust extraction system efficiently removes fine dust particles from inside the cabinet, improving operator safety and working comfort. The 16-litre bag filter captures solid particles, while the powerful 1200 W motor and vacuum pressure above 12 kPa ensure effective separation of contaminants. The flexible 2-metre connection hose allows convenient installation of the extraction system. Standard Equipment KDP220TOP blasting cabinet Blasting gun with 4 ceramic nozzles (sizes 4, 5, 6, and 7 mm) 4 protective films for the viewing window Rubber gloves integrated with the cabinet housing 12 V working light powered by 230 V supply Two extraction connections: 63 mm and 90 mm Stable internal working grid DC23 dust extraction system with filter and connection hose Polish-language operating manual Technical Specifications – KDP220TOP Blasting Cabinet Parameter Value Air consumption 400–700 L/min Maximum operating pressure 8 bar Air connection 1/4" quick coupling Abrasive tank capacity approx. 18 kg Extraction connection diameter 63 mm Viewing window area 540 x 250 mm Front height 370 mm Internal cabinet dimensions (L x W x H min–max) 840 x 550 x 370–550 mm External cabinet dimensions (L x W x H min–max) 890 x 560 x 1118–1380 mm Weight 49 kg Technical Specifications – DC23 Dust Extractor Parameter Value Model DC23 Voltage 220 V Power 1200 W Vacuum pressure >12 kPa Inlet diameter 45 mm Filter capacity approx. 16 l

Condition: new, Year of construction: 2026, CORMAK TS250 / 400V Table Saw The CORMAK TS250 / 400V is an industrial-grade table saw designed for high efficiency and reliability in professional woodworking shops, furniture manufacturing facilities, and craft workshops. Thanks to its three-phase power supply, stable construction, and robust technical parameters, the machine enables fast, accurate, and repeatable cutting of solid wood and wood-based materials. Main advantages of the machine 2.2 kW (S1) / 3.1 kW (S6) motor – provides high working power even during long-term operation under heavy loads. Large cutting depth – up to 80 mm at 90° – allows machining of thick wooden elements. Blade tilt adjustment from 90° to 45° – enables precise bevel and angled cuts. Sliding table with 1000 mm travel – ideal for processing large panels and workpieces. Blade speed of 4000 rpm – ensures clean and precise cuts without burning the material. 890 mm table height – provides an ergonomic and comfortable working position for the operator. 400V three-phase power supply – guarantees stable operation even during intensive use. Construction and technology The TS250 / 400V table saw is based on a rigid welded steel construction resistant to vibrations and dynamic loads. High-quality mechanical components and a reliable drive system allow efficient processing of hardwood, plywood, MDF, HDF, and composite materials. The blade height and tilt adjustment system operates smoothly and precisely thanks to screw-guided mechanisms. The solid parallel fence with an accurate adjustment system allows quick and safe positioning of the workpiece. Kjdpfx Asvxhhbjg Ajdu The housing and working components have been designed for convenient operation and safe use. The table construction allows easy expansion of the working area, especially when combined with additional accessories. Precision and work efficiency The TS250 model offers a maximum cutting depth of 80 mm at 90° and 56 mm at 45°, making it a versatile solution for a wide range of woodworking applications. Thanks to the 400V power supply and optimized blade speed, the table saw provides industrial-level cutting quality and repeatability, both for individual production and serial manufacturing. Applications The TS250 / 400V is an ideal solution for: Woodworking and furniture manufacturing companies – for cutting furniture carcasses, countertops, fronts, frames, and mouldings. Craft workshops – requiring a durable and accurate machine for processing wood and wood-based materials. Production of structural components – for machining boards, panels, and construction materials. Installation and assembly companies – for precise cutting of components directly at the workplace. Standard equipment Carbide-tipped saw blade 250 × 30 × 2 mm Parallel fence Sliding table Blade guard Blade height and angle adjustment system Optional equipment Dust extraction system with 100 mm connection port Format sliding table for large panels Additional saw blade sets Technical specifications Parameter Specification Maximum saw blade diameter / bore 254 mm Blade speed 4000 rpm Blade tilt range 90° – 45° Maximum cutting depth at 45° 56 mm Maximum cutting depth at 90° 80 mm Sliding table travel 1000 mm Cutting width on right side of blade 620 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 400 V Weight 125 kg Machine dimensions 1090 × 1330 × 910 mm

Condition: new, Year of construction: 2026, CORMAK TS250 / 230V Table Saw The CORMAK TS250 / 230V is a professional table saw designed for woodworking shops, craft workshops, and furniture manufacturers looking for a reliable machine for accurate and efficient cutting of wood and wood-based materials. Its compact dimensions, robust construction, and single-phase power supply make it an excellent choice for users with limited workspace who still require high precision and performance. Main advantages of the machine 254 mm saw blade diameter – enables cutting materials up to 80 mm thick at a 90° angle. 2.2 kW (S1) / 3.1 kW (S6) motor – provides stable power even during intensive operation. Blade speed of 4000 rpm – ensures clean and smooth cutting results. Blade angle adjustment from 90° to 45° – allows precise bevel and angled cuts. Efficient sliding table – with up to 1000 mm travel, ideal for formatting larger workpieces. 620 mm cutting width on the right side of the blade – enables processing of wide panels and furniture boards. Compact design and 230V power supply – allows operation in workshops without access to a three-phase electrical system. Design and technology Kdsdpsvxhhzefx Ag Asu The TS250 / 230V is based on a stable steel frame that provides high rigidity and effective vibration damping, resulting in improved accuracy and operator comfort. The spindle is powered by a 2.2 kW motor (S1), allowing long-term continuous operation, while the increased S6 power rating of 3.1 kW provides additional performance reserves when cutting harder materials. The blade height and angle adjustment system is based on precise guides and trapezoidal screws, ensuring stable settings even during extended operation. The working table height of 890 mm has been ergonomically designed for comfortable operation. The parallel fence and sliding table provide secure and accurate material guidance along the cutting line. Precision and working efficiency The CORMAK TS250 table saw enables precise cross-cutting and rip-cutting operations. The maximum cutting depth of 80 mm at 90° and 56 mm at 45° allows processing of most standard wooden components. The rigid construction and accurate blade guidance at 4000 rpm ensure smooth cutting edges and minimal material waste. Applications The TS250 model is suitable for: Woodworking workshops – for manufacturing furniture, cabinet fronts, frames, and structural components. Service workshops – wherever mobility, compact dimensions, and high precision are required. Craft workshops – for professionals working with various wood species. Individual users – who have access only to single-phase power but require industrial-level cutting quality. Standard equipment Carbide-tipped saw blade 250 × 30 × 2 mm Parallel rip fence Sliding table Blade guard Integrated blade height and angle adjustment system Optional equipment Dust extraction system with 100 mm port Format sliding table for larger workpieces Additional saw blade sets Technical specifications Parameter Specification Maximum blade diameter / bore 254 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 56 mm Maximum cutting depth at 90° 80 mm Sliding table travel 1000 mm Cutting width on the right side of the blade 620 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 230 V Weight 125 kg Machine dimensions 1090 × 1330 × 910 mm

Condition: new, Year of construction: 2026, CORMAK TS250CL Table Saw The TS250CL is a high-quality table saw designed for professional users who require reliability, precision, and a compact machine design. The saw combines advanced technical solutions found in higher-class models with an accessible and practical format. It is an excellent choice for small woodworking workshops, furniture production, and craft applications, providing high cutting efficiency for various wood materials. Main advantages of the machine Maximum blade diameter of 254 mm – enables deep and precise cuts at different cutting angles. 2.2 kW (S1) / 3.1 kW (S6) motor – provides stable power output even during intensive operation. Blade tilting range from 90° to 45° – allows accurate bevel cutting. Compact construction – ensures efficient use of limited workshop space. Stable and expandable work table up to 1000 mm in length – provides precise material guidance. Efficient dust extraction system with 100/25 mm ports – improves cleanliness and operator comfort. Design and technology The TS250CL table saw is built on a solid welded frame that provides excellent rigidity and vibration resistance. The main mechanical components are manufactured from high-quality steel and cast iron, ensuring long service life and reliable operation. The machine is powered by an induction motor with 2.2 kW continuous power rating (S1), with an increased output of 3.1 kW in S6 mode. This allows efficient cutting of hardwood and wood-based materials. The 254 mm carbide-tipped saw blade provides effective cutting with a maximum depth of 80 mm at 90° and 65 mm at 45°, meeting the requirements of most woodworking applications. The blade speed of 4000 rpm ensures clean, accurate cutting lines and high-quality finished surfaces. Precision and working efficiency The rigid construction combined with precise blade guidance allows the TS250CL table saw to deliver repeatable and accurate results. The possibility of extending the work table up to 1000 mm makes handling larger workpieces easier and more comfortable. Smooth adjustment of the cutting angle and height significantly improves daily operation, allowing the user to quickly adapt the machine settings to different production requirements. Applications The TS250CL table saw is an ideal solution for: Woodworking workshops – for cutting solid wood, MDF boards, plywood, and laminates. Furniture manufacturers – where dimensional accuracy and high-quality surfaces are essential. Craft workshops – as a versatile and compact professional table saw. Individual users – looking for a reliable machine for a professional home workshop. Standard equipment Circular saw blade 250 × 30 × 2 mm Work table extension Dust extraction ports 100/25 mm Safety guards and limit stops Optional equipment Parallel guide system Cross-cut sliding carriage for repetitive cuts Dedicated dust extraction system Technical specifications Parameter Specification Maximum blade diameter / bore 254 × 30 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 65 mm Maximum cutting depth at 90° 80 mm Cutting width with table extension 750 mm Maximum cutting length 1000 mm Dust extraction port 100/25 mm Working table dimensions 635 × 420 mm Working table dimensions with extension 635 × 1500 mm Motor power 2.2 kW (S1) 230V / 3.1 kW (S6) Weight 110 kg Machine dimensions 1450 × 1000 × 1100 mm Kedpfx Aovxhkisg Aodu

Condition: new, Year of construction: 2026, CORMAK TS315 Table Saw The CORMAK TS315 is a robust, efficient, and precise table saw designed for intensive use in professional woodworking and manufacturing facilities. Equipped with a 315 mm diameter saw blade and a rigid industrial-grade construction, this panel saw is ideal for cutting solid wood, MDF, HDF boards, as well as plastics with similar properties. The powerful motor and extensive working capabilities make the machine suitable for even the most demanding users. Main advantages of the machine 315 mm saw blade – enables cutting materials up to 100 mm thick at a 90° cutting angle. Powerful motor 2.8 kW (S1) / 3.3 kW (S6) – ensures stable operation even under maximum load. Blade speed of 4250 rpm – provides high-quality, smooth cutting results. Sliding format table 1600 × 238 mm – allows comfortable handling of large furniture panels and sheet materials. Stable industrial construction – reduces vibrations and improves machining accuracy. Multi-section table system – table extensions and widening elements increase the total working area. Precision rip fence – ensures repeatable dimensions during serial cutting operations. Design and technology The TS315 table saw has been developed as a professional woodworking saw, combining a heavy-duty structure with carefully designed ergonomics. The machine body is made of high-quality steel, providing maximum rigidity and resistance to deformation during intensive operation. The table system, including the main table, sliding format table, extensions, and widening sections, allows comfortable handling of large workpieces. This significantly improves workflow efficiency and increases operator safety. Smooth adjustment of cutting height and blade angle is carried out using precise handwheels, allowing quick setup according to the requirements of each task. All moving components are mounted on bearings, while the guide mechanisms ensure long-lasting and trouble-free operation. Precision and working efficiency Thanks to the large 315 mm blade diameter, the TS315 table saw can cut materials up to 100 mm thick while maintaining excellent accuracy. The blade speed of 4250 rpm guarantees clean, precise cuts without burning or tearing of the material. The sliding format table combined with precision guides enables accurate material positioning and perfect angle cutting, which is essential when processing furniture boards, cabinet fronts, and structural components. The CORMAK TS315 table saw is suitable for: Professional woodworking factories – for intensive daily production work. Furniture manufacturing – precise cutting of large MDF, HDF, plywood, and laminate panels. Craft workshops – as a versatile professional table saw. Specialized production facilities – for cutting PVC, ABS panels, and materials with similar density. Standard equipment Saw blade 315 × 30 × 3.2 mm Mitre gauge Parallel rip fence Sliding table Table extension and widening section Technical specifications Saw blade dimensions 315 × 30 × 3.2 mm Blade speed 4250 rpm Maximum cutting height at 90° / 45° 100 / 75 mm Maximum cutting width with rip fence 940 mm Kedsvxhm Dspfx Ag Asdu Main working table dimensions 800 × 365 mm Table extension 760 × 600 mm Table widening section 500 × 350 mm Sliding format table 1600 × 238 mm Dust extraction port diameter 100 mm Motor power S1/S6 2.8 kW / 3.3 kW Power supply 400 V Weight 245 kg Machine dimensions 1540 × 2400 × 1300 mm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Kdedpfxewqw Tpe Ag Aou Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.

Condition: new, Year of construction: 2026, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software Kdedpfx Aswcd Tmeg Aju OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Workspace 600x900x300 mm DSP control Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MClL-800?OSK+KK, input voltage: 400 V, type of input current: three-phase, type of cooling: air, total width: 2,330 mm, total length: 2,150 mm, total height: 2,800 mm, sheet thickness aluminum (max.): 2 mm, continuous operating pressure: 0.5 bar, table length: 1,150 mm, Equipment: hot water, type plate available, Industrial rotary spray washer with fume extractor and ion exchange station. Designed for washing steel, aluminum, non-ferrous metal elements with a maximum load of 250 kg and dimensions of 1000x800 mm. Technical documentation and completed swewis are available for the station. More information at the phone number. Kjdpswnbh Ejfx Ag Aodu

Condition: repair required (used), Year of construction: 2019, machine/vehicle number: N1000065258, "FLOOR WASH MACHINE TERA 1102 - NILFISK SC 6500-1100D, Serial NO. N1000065258 , Construction date 28.02.2019" Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Kdedpfjv Axycsx Ag Aeu Terms of delivery: EXW Sebes, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: N1000065167, "FLOOR WASH MACHINE TERA 1102 - NILFISK SC 6500-1100D, Kdodsv Ax Awspfx Ag Aju Serial NO. N1000065167 , Construction date 28.02.2019" Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Sebes, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: new, Year of construction: 2026, The CORMAK MJ45-KB4 sliding table saw is an industrial panel saw with a scoring unit, designed for precise cutting of furniture boards, plywood, and other wood-based materials. The 2600 mm sliding table and robust construction ensure repeatability and high cutting quality. Key advantages of the machine Scoring unit with a separate motor – eliminates chipping on laminates and veneers. Aluminum sliding carriage running on hardened steel guide bars – ensures rigidity and smooth feed. 2600 mm sliding table – reliable handling of large and heavy panels. Main motor 5.5 kW – consistent cutting quality in continuous operation. Tilt range 0–45° – flexibility when cutting angled components. Extendable telescopic fence up to 3100 mm – fast and repeatable settings. Rotational speeds 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal adjustment to material type. Cast iron body – vibration damping and cutting system stability. Construction and technology The design is based on a torsion-resistant cast iron body, which stabilizes the saw unit and minimizes vibrations. The aluminum carriage moves on hardened rods, ensuring long-term precision. The outrigger table facilitates handling large panels without additional support. Adjustment mechanisms with clear readouts (including angle indication on the handwheel) allow for quick and precise setup. Precision and performance The MJ45-KB4 sliding table saw ensures clean edges thanks to the 125 × 20 mm scoring blade and stable guide geometry. The cutting height range up to 90 mm at 90° and 56 mm at 45° allows processing of a wide range of formats and thicknesses. Two main blade speeds enable parameter adjustment to the material type, maintaining dimensional repeatability and reducing the need for rework. Applications The machine is dedicated to workshops and production facilities seeking a stable panel saw with a scoring unit for serial cutting of furniture and structural elements. It meets the requirements of plants where quality, dimensional accuracy, and reliability in multi-shift operation are essential. Kjdpoywkc Dsfx Ag Asdu Standard equipment Scoring unit with separate drive 2600 mm sliding table on guide bars Dial indicator for blade tilt Telescopic fence up to 3100 mm (front/rear mounting on support table) User manual in Polish CE declaration of conformity Optional equipment Set of saw blades for wood and laminate Dust extraction systems Panel transport trolley Technical specifications Sliding table length: 2600 mm Cutting width: 1250 mm Saw tilt: 0–45° Cutting height at 90°: 90 mm Cutting height at 45°: 56 mm Max main blade diameter: 315 mm Max scoring blade diameter: 125 mm Main blade speed: 4000 / 6000 rpm Scoring blade speed: 8000 rpm Main motor power (continuous S1/S6): 5.5 kW Scoring motor power (continuous S1/S6): 0.75 kW Weight: 650 kg

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Ksdpfxjyy Nl Nj Ag Aodu Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 116 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HD 16/15-4 CAGE COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 150 bar and 1600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. Kodpfxew S Ixko Ag Ajdu TECHNICAL DATA: Power supply (~/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 500 - 1600 Operating pressure (bar): 30 - 150 Maximum pressure (bar): 190 Connected power (kW): 7.5 Power cable (m): 5 Weight (kg): 116 Dimensions (L x W x H) (mm): 957 x 686 x 1080 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Highly legible and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Large wheels facilitate transport over uneven terrain

Condition: used, Year of construction: 2011, Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  - Capacity: 1,500 – 2,500 crates/h (adjustable) - Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h - Crates in machine: 48 pieces - Crate format: customizable - Running direction: transverse - Spray pressure: approx. 4.0 bar - Lye tank volume: approx. 1.0 m³ - Treatment section length: approx. 34 meters - Main pump: 15 kW, 80 m³/h - Drive units: - Main drive: 0.33 kW - Crate infeed: 0.55 kW - Crate outfeed: 0.55 kW - Dimensions: - Length: 3,000 mm - Width: 2,000 mm - Height: approx. 5,000 mm - Crate infeed height: 1,100 mm - Crate outfeed height: 4,100 mm - Weight: approx. 1,500 kg - Water connections: - Cleaning water inlet: R 1 1/4” - Rinsing connection: R 3/4” - Construction: stainless steel (except drives) - Control system: LOGO controller Kedpfx Ajwu S Susg Asdu - Electrical installation: per customer specification Scope of Delivery  - Spiral crate washer (upper unit) - Lower tank body

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: Simens, controller model: SINUMERIK 808D, total height: 2,700 mm, total length: 2,800 mm, total width: 2,300 mm, table width: 500 mm, table length: 1,000 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, The machine was purchased in August 2025 together with a lathe – listed in a separate advertisement – and has only been operated for testing purposes (up to 20 hours of operation). Due to a shift in business priorities, we will not be initiating the planned production. Additionally: 12,000 rpm spindle, 4th rotary axis, TS27R tool measurement probe Kodpfx Aeyi Apreg Asdu The machine is under a lease agreement with PKO Leasing S.A. until August 2028. Leasing terms will be provided upon contact. Lease transfer is preferred, although a cash purchase is possible with the lessor's consent.