Used Cosma Rc 400 for sale (20,824)

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: 1. Mill 2. Raw material filling unit Ksdpfjx T Ar Nsx Am Njlr 3. Air filter 4. Electrical switchgear

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: Klsdpfsyh Hwusx Am Nor 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Klodpey Dhudjfx Am Nor

Condition: excellent (used), mileage: 24,700 km, first registration: 04/2023, fuel type: electric, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: electricity, color: white, gearing type: automatic, loading space length: 7,800 mm, loading space width: 2,460 mm, loading space height: 2,530 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, traction control, = Additional options and accessories = - Reversing camera - Adaptive cruise control - Lane departure warning system - Radio and audio system - Speed limiter - Sun visor = Special features = Kljdpfey Anbzsx Am Njr W1T98302010604640 ACTROS e 400 ex-demonstration truck with Lamberet cooling unit = More information = Front axle: Steerable Unladen weight: 14,570 kg Payload: 12,355 kg Gross Vehicle Weight (GVW): 27,000 kg Body manufacturer: LAMBERET Refrigeration unit: electric Roadworthiness test: valid until Dec. 2026 Technical condition: very good Optical condition: very good

Condition: excellent (used), mileage: 18,700 km, first registration: 10/2023, fuel type: electric, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: electricity, color: white, gearing type: automatic, Year of construction: 2023, Equipment: ABS, central locking, cruise control, electric window regulation, fog lights, power assisted steering, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Adaptive cruise control - Roof spoiler - Lane departure warning system - Multimedia system - Radio and audio system - Speed limiter - Stability control - Sun visor = Details = W1T98302010604264 MERCEDES E ACTROS 400 EX DEMONSTRATION TRUCK WITH AJK HOOKLIFT 20 TON = More information = Klodpfx Amey Am E Ej Nor Axle configuration Front axle: Steerable; Left tyre profile: 90%; Right tyre profile: 90% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Left inner tyre profile: 90%; Left outer tyre profile: 90%; Right inner tyre profile: 90%; Right outer tyre profile: 90% Rear axle 2: Tyre size: 315/70R22.5; Left tyre profile: 90%; Right tyre profile: 90% Weights Empty weight: 13,819 kg Payload capacity: 13,105 kg GVW: 27,000 kg Maintenance, history and condition APK (Dutch MOT): certified until Dec. 2026 Technical condition: very good Optical condition: very good Warranty Warranty: W1T98302010604264

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C13K2W900259, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Field of application: Construction Weights Empty weight: 4.879 kg Functional Generator capacity: 400 kVA CE mark: yes Other information Fuel consumption: 62.2 Liter / Hour at 75% Load Generator: Caterpillar LC6114B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 842 l Transport dimensions (LxWxH): 4,93x1,62x2,22 Additional information Kljdpfx Amswby Abo Nsr Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: RZB00174, fuel type: diesel, motor manufacturer: C9.3B, General information Field of application: Construction Weights Empty weight: 2.300 kg Functional Generator capacity: 400 kVA Klodpfxsxxn N Ue Am Nsr CE mark: yes Other information Fuel consumption: 61 L/hr at 75% load Generator: SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Transport dimensions (LxWxH): 2,662x1,12x1,766 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: excellent (used), mileage: 1,080,000 km, power: 291 kW (395.65 HP), first registration: 02/2014, fuel type: diesel, tire size: 385/65R,22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 620 l, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, spoiler, traction control, = Additional options and equipment = - 8,000 kg front axle - 600 liter diesel tank - Adaptive cruise control - Aluminum fuel tank - AS-TRONIC gearbox - Heated mirrors - Comfort driver’s seat - Roof spoiler - Differential lock - Remote central locking - Speed limiter - Air conditioning - Refrigerator under bed - Air horns on cab roof - Multifunction steering wheel - MX engine brake - Radio/CD player - Sleeper cab - Sun visor - Toolbox = Remarks = ORIGINAL DUTCH, NICE & CLEAN CONDITION DAF FTCF400 SPACECAB 4x2 TRACTOR UNIT WITH AS-TRONIC GEARBOX, AIRCONDITIONING & COMPLETE SPOILER SET ON CABIN!! 400HP, EURO 6!! AS-TRONIC GEARBOX!! MX-BRAKE!! AIR CONDITIONING WITH ATC!! FRIDGE UNDER BED!! AIR HORNS ON ROOF!! SKY-LIGHTS!! SUN VISOR!! COMPLETE SPOILER SET ON CAB!! ETC!! TRUCK IN NICE, CLEAN & GOOD DRIVING CONDITION, READY FOR THE JOB!! MORE DAF CF/XF EURO 2/3/4/5/6 IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! Klsdpeyfh H Iefx Am Nor SHIPMENT, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.: "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Transmission: AS-TRONIC (12 GEARS), 12-speed, automatic Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max axle load: 8,000 kg; Left tire tread: 80%; Right tire tread: 80%; Suspension: leaf springs Rear axle: Tire size: 315/70R22.5; Twin tires; Differential lock; Max axle load: 11,500 kg; Left inner tire tread: 60%; Left outer tire tread: 60%; Right inner tire tread: 60%; Right outer tire tread: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,356 kg Payload: 13,144 kg gross vehicle weight (GVW): 20,500 kg Functional Load compartment volume: 620 l Body manufacturer: ZF Loading platform height: 116 cm Condition Technical condition: very good Optical condition: very good Identification Registration number: 73-BDN-3 Further information Please contact the Sales Department or Erik Engel for more information.

Condition: good (used), mileage: 945,652 km, power: 291 kW (395.65 HP), first registration: 02/2014, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, spoiler, General information Model code: ### Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Klodpfx Amjy Ai Rqe Nor Weights Empty weight: 7.354 kg Carrying capacity: 12.146 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Aluminium fuel tank - Armrest - Car kit - Low-noise - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto

Condition: used, Centre height 125 mm Distance between centres 400 mm Max. longitudinal travel 440 mm Grinding wheel 400x50x127 mm Max. grinding diameter 250 mm Max. table load 80 kg Max. workpiece weight between centres 80 kg Grinding wheel speeds: number (steps) 3, 1500-1800 rpm Angular displacement +/- 45° Workpiece spindle head: - stepless speeds 30-675 rpm - rotatable 90° Spindle taper 5 MT Tailstock taper 3 MT Table speed stepless 0.05-5.50 m/min External grinding wheel motor 3 kW Ksdpfx Aoylcpkom Nolr Machine weight approx. 1500 kg

Condition: used, Year of construction: 2011, We are offering this very rarely used oil temperature control unit. It was used for research purposes. The unit still contains the thermal oil. The two connection hoses (without guarantee) are also included. Please send your price proposal—and allow us some time to respond, as we handle this alongside our main business activities. Kljdpfoyk Dw Tex Am Nor The unit must be dismantled and disconnected by your own qualified personnel, insofar as this has not already been done. All transport-related procedures and requirements must be carried out at your own cost and risk. The buyer is liable for any (consequential) damage that occurs on the premises. Collection must be completed within 14 days after the sale.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.3 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA U 400 wire EDM machine was manufactured in 2000. It features a table travel of 600 x 400 mm and a Z-axis travel of 400 mm, accommodating a maximum workpiece size of 1200 x 880 x 400 mm with a weight capacity of 850 kg. If you are looking to get high-quality wire EDM capabilities, consider the ONA U 400 machine we have for sale. Contact us for further details. • Auxiliary table travel (U/V): 80 x 80 mm • Maximum workpiece size (X/Y/Z): 1200 x 880 x 400 mm • Maximum workpiece weight: 850 kg • Taper cutting angle at 100 mm (Z): 18° • Maximum taper cutting angle: 30° • Wire characteristics (bare): Cu 63% / Zn 37% • Wire tensile strength: 900 N/mm² • Wire spool type: DIN 125 / DIN 160 • Guide type: Closed diamond • Position resolution (X/Y/U/V): 0.001 mm • Minimum programmable increment: 0.001 mm Kjdpfxsy Dgrze Am Nelr

Condition: new, mileage: 300 km, power: 154 kW (209.38 HP), fuel type: electric, number of seats: 26, gearing type: automatic, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Mercedes Sprinter eSprinter electric * 113 kWh battery * Up to 450km range * DC 115KW * 15 seats * 10 standing places * Wheelchair space * Roof air conditioning for the passenger compartment * Automatic transmission * Cruise control * Multifunction steering wheel * Air conditioning for driver * Swivel seat for driver * Roof air conditioning * Parking heater * Heating passenger compartment * LED lighting white and blue * USB charging stations in the passenger compartment * Handrails * Stop buttons * Wheelchair ramp * Reversing camera * Anti-slip floor * Electric swing doors * Folding seats * Assistant systems * Preparation for destination display * Roof hatch * Rear low-floor Kodov Tghijpfx Am Njlr * Bus extension * Financing possible * Deposits possible * Intermediate sale, errors and changes excepted

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 24288, power: 550 kW (747.79 HP), pressure: 4 bar, nominal heat output: 550 kW (747.79 HP), tank capacity: 1,546 l, operating pressure: 4 bar, Equipment: type plate available, We are offering this used MAWERA FU 400 RIA heating system, year of manufacture 2005. Kljdpfjy D A A Nsx Am Njr Operating pressure: 4 bar Output: 550 kW If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, mileage: 537,000 km, power: 291 kW (395.65 HP), first registration: 07/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, color: blue, gearing type: automatic, emission class: euro6, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,540 mm, Year of construction: 2017, Equipment: ABS, air conditioning, navigation system, parking heater, tail-lift, DAF CF 400 REFRIGERATED TRUCK 6x2 Steering lift axle Ksdjy A Aigepfx Am Nelr Air suspension Stainless steel storage boxes Roof spoiler Automatic transmission 1 owner German vehicle Differential lock Original paint Alloy wheels Tyres approx. 50-60% Refrigerated body Swing doors Thermo King diesel power unit Printer BÄR tail lift 2000 KG etc.

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: Klsdpfxsyz T R Eo Am Ner - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: good (used), Catalogue number 7872 TECHNICAL DATA Klodpfxjyaalrs Am Nsr - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm Kodpfx Asyy Rqasm Nolr - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7906 Technical specifications: - Track width: 400mm - Working width of roller: 400mm - Max saw blade diameter: 450mm - Saw blade bore diameter: 70mm - Max cutting height: 160mm - Table width with extension: 720mm - Table length: 1900mm From above: - Kickback fingers/ejectors: 2 rows - Sliding roller, metal, pressure type - Kickback fingers/ejectors - Sliding roller, metal, pressure type - Shaft with saw blades - Smooth sliding roller, metal From below: - Guide rail - Kickback fingers - Track - Electric body lifting - Central track lubrication - 2 feed speeds + stepless adjustment - Feed motor: 0.9kW - Main motor: 30kW - Extraction port diameter: 260mm - Overall dimensions (L/W/H): 2350x1800x2200mm - Weight approx: 2000kg ADVANTAGES – Italian manufacture – New track and sliders – Very good condition Klsdpjynknyefx Am Nor – Used multirip saw Net price: 55,900 PLN Net price: 13,300 EUR depending on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7948 Technical data: - track width: 400mm - working width of shaft: 400mm - max blade diameter (mounted: 350mm): 450mm - blade bore diameter: 70mm - max cutting height (with 450mm blade): 160mm Kljdpfx Ameyxrbke Nor - table width with extension: 710mm - table length: 1900mm From above: - dogs/kickers: 2 rows - sliding roller, metal, pressure - dogs/kickers - sliding roller, metal, pressure - shaft with saw blades - smooth sliding roller, metal, sliding From below: - guide bar - dogs - track - electric body lifting - central track lubrication - 2 feed speeds + stepless - total power: 32kW - overall dimensions L/W/H: 2050x1800x1530mm - weight approx. 2000kg Advantages: – Italian production – very good condition – DTR documentation (technical manual) – used multi-blade saw Net price: 48,900 PLN Net price: 11,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers Kljdpsyf A Ruefx Am Ner - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Suitable for: use on lathe; machining center; milling machine Chuck can be mounted on milling table or machining center using a mounting flange. Ksdpfx Amjy Apnce Njlr Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: good (used), Year of construction: 1999, - Maximum sanding width (mm): 390 - Maximum sanding height (mm): 390 - Sanding pad from above: 1 - Sanding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Conveyor belt: for material feed - Feed speeds (m/min): 6/11/16 - Extraction connection diameter (mm): 150 Kedpfxjy Avzvj Am Nolr - Constant table height - Pneumatic sanding belt oscillation - Pneumatic sanding belt tensioning - Special HBS sanding shoe: for contour sanding with thickness variations up to 4 mm or warped workpieces - Selector switch for contour sanding / calibrating - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness sensing - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

Condition: used, Year of construction: 2020, Packaging machine Fully automatic side sealing machine Profi Packer Manufacturer: Schlichter Model: SCV 400 Pro Year of manufacture: 2020 Longitudinal sealing: continuous Photoelectric sensors: horizontal and vertical (standard) Compressed air: 6 bar Transport speed per minute: min. 5 meters, max. 30 meters Film core Ø: 76 mm Maximum film roll Ø: 350 mm, up to 700 mm with optional fold-down module! Maximum film roll width: 650 mm Sealing bar width: 300 mm Product width min. and max.: 50 mm to 410 mm Product height min. and max.: 1 to 250 mm Product length min. 50 mm, max. unlimited Film thickness: from 7 to 80 μm Film material: Polyolefin fine shrink films, polyethylene, PVC; PLA and other bio films Performance per minute: up to approx. 85 cycles Machine dimensions (L x W x H): 2,200 x 1,680 x 1,800 mm Weight: 800 kg Shrink tunnel: Model: SCT 400U Year of manufacture: 2020 Passage width: 450 mm Kodjxuglmjpfx Am Nelr Passage height: 280 mm Heating capacity: 14 kW Dimensions (L x W x H): 2,065 x 1,065 x 1,340 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling Klodpjx Rvciefx Am Njr - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse