Used Cpm Pellet Press 9042-12 for sale (31,913)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, PCS-G control desk, IVS - Ink Volume Setting, Grafix dry spray > RYOBIMATIC dampening system, Ryobi RPC semi-automatic plate change > Preset - automatic size device > Suction feed board > Automatic blanket, roller and impression-cylinder washing device > High pile delivery, non-stop delivery Technotrans LED UV dryer Interdeck between 1st and 2nd unit Podpfx Agsy Hx Ims Djgk 45 million

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Pjdju Thhropfx Ag Dsgk Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h Podpfx Agjx A U Nce Dogk bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: new, load capacity: 12,000 kg, lifting height: 4,500 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,610 mm, motor manufacturer: Cummins, gearing type: converter, fork length: 1,520 mm, turning radius (outer): 4,300 mm, front tire type: pneumatic tires (air-filled), front tire size: 10.00-20-16PR, rear tire size: 10.00-20-16PR, overall weight: 15,300 kg, color: red, Equipment: CE marking, cabin, head guard, lighting, seat heater, sideshift, Lonking LG120DT 12-ton diesel forklift in excellent working condition, built for heavy-duty industrial applications. Fitted with a 4.5m 3-stage free lift (triplex) mast, side-shifter and fork positioner for precise and efficient load handling. Powered by a reliable Cummins diesel engine, offering strong performance and durability for ports, warehouses, logistics yards and manufacturing environments. Key features: - 12,000 kg lifting capacity - 4.5m triplex mast (free lift) - Side-shifter and fork positioner Pedey A Ng Eepfx Ag Dogk - Front double-row wheels for improved stability - Hydraulic steering priority system - Travel OPS safety system - Comfortable suspension seat - Cab heater - Reversing camera - Heavy-duty industrial chassis Well-maintained machine, ideal for demanding lifting operations.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 40 t, table length: 1,030 mm, Equipment: CE marking, documentation/manual, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Make: Bystronic Model: Xpert 40/1030 Psdpfx Agey D Smws Djgk Tonnage 400 kn / 40ton Back gauge: 6axis back gauge Bending length 1030 mm / 1metre Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Xpert 40/1030 ByVision Bending control with 22 Inch Full HD display and touch technology

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 5 h, load capacity: 16,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,130 mm, power: 168 kW (228.42 HP), motor manufacturer: Cummins, fork length: 2,400 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 12.00-20 / 20PR, rear tire type: pneumatic tires (air-filled), rear tire size: 12.00-20 / 20PR, overall weight: 22,400 kg, color: red, Equipment: CE marking, air conditioning, cabin, front guard, lighting, pallet forks, sideshift, 🔧 Key Specifications: • Year: 2025 • Operating hours: 5 h • Fuel type: Diesel • Capacity: 16,000 kg • Lowered mast height: 3,130 mm • Max lift height: 4.50 m • Power: 168 kW (228 hp) • Fork positioner: Yes • Mast type: Triplex • Fork length: 2,400 mm • Side shift: Yes • Cab type: Full cabin (Closed) with Airco • Oil cooler: Yes • CE certification: Yes ✨ Highlights: ✅ Carefully selected from trusted sources with verifiable history ✅ CE certification and full documentation included ✅ Equipped with Side-shift & Fork positioners ✅ Airco for operator comfort ✅ Oil cooler for optimal performance ✅ Ready for immediate transport and operation Psdpfx Agoy Hpmao Djgk ✅ Comprehensive technical documentation available ⚙️ Condition: Clean, fully operational machine in excellent condition. Immediate availability from our Sittard stock. 🌍 Location & Delivery: 📍 Located in Sittard, the Netherlands 🚚 Worldwide delivery possible 💰 Competitive EXW pricing (excluding VAT) Reliable first-owner machines with complete service history and expert technical support. Benefit from one of the largest European stocks of new and used equipment. All machines are CE certified, and ready for immediate use. Spare parts and professional assistance available upon request. 🚚 Delivery: • Crane loading available on request for hassle-free handling at departure • Flexible dispatch options tailored to your destination and logistics preferences • All shipping handled professionally by Colle Rental & Sales logistics team

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 16,000 kg, lifting height: 4,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), motor manufacturer: Cummins, gearing type: converter, fork carriage width: 2,500 mm, fork length: 2,400 mm, fork width: 250 mm, fork thickness: 100 mm, ground clearance: 350 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 12.00-20 / 20PR, rear tire type: pneumatic tires (air-filled), rear tire size: 12.00-20 / 20PR, overall weight: 23,700 kg, color: red, Equipment: CE marking, air conditioning, front guard, head guard, lighting, pallet forks, sideshift, 🔧 Key Specifications: • Year: 2025 • Operating hours: 0 h • Fuel type: Diesel • Capacity: 16,000 kg • Load center distance: 1200 mm • Lowered mast height: 3,695 mm • Max lift height: 4,000 mm • Engine: Cummins 6-cylinder – 168 kW (225 hp) • Mast type: Duplex • Fork length: 2,400 mm • Side shift: Yes • Fork positioner: Yes • Cab: Full cabin (EGO) with air conditioning • CE certification: Yes ✨ Highlights: ✅ Brand new, unused machine ✅ Cummins 6-cylinder engine (168 kW) – powerful & reliable ✅ Full cabin with air conditioning for maximum operator comfort ✅ Equipped with side-shift & fork positioners for precise handling ✅ Air tyres 12.00-20 / 20PR (6 pcs) for heavy-duty applications ✅ Oil cooler for optimal performance under load ✅ LED rotating beacon & back-up alarm for enhanced safety ✅ Working lights front & rear for low-light conditions ✅ CE certified with full documentation ✅ Ready for immediate deployment ⚙️ Condition: Brand new, unused forklift in perfect condition. Available directly from our stock in Sittard. 🌍 Location & Delivery: 📍 Sittard, the Netherlands 🚚 Worldwide delivery available Psdpfx Agey Hpk Sj Djgk 💰 Competitive EXW pricing (excl. VAT) 📝 Description: The Kalmar DCG160-12 is a heavy-duty diesel forklift designed for demanding industrial and port operations. With a lifting capacity of 16,000 kg and a maximum lifting height of 4.0 metres, this machine delivers outstanding performance in intensive applications. Powered by a robust Cummins 6-cylinder Stage V engine (168 kW), the forklift ensures reliable and efficient operation. The hydrodynamic Powershift transmission guarantees smooth handling, while the fully enclosed EGO cabin with air conditioning provides excellent operator comfort. This unit is equipped with air tyres (12.00-20 / 20PR), oil cooler, LED rotating beacon, back-up alarm, and working lights at both front and rear. The inclusion of side-shift and fork positioners allows precise load control, making it ideal for heavy-duty material handling tasks. 🚚 Delivery: • Crane loading available on request • Flexible shipping options worldwide • Professionally handled by Colle Rental & Sales logistics team

Condition: new, Year of construction: 2026, pressing force: 150 t, DURENDUS 150 T Workshop Press – C-Frame Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered according to a specific customer order. We can supply this machine from stock or manufacture a new one for you – gladly taking individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in the workshop and industrial sector. Base price: €6,900 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to the respective application. The base version represents the basic functional model – in practice, it is most often expanded with additional equipment and configured to suit specific projects. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure control - Sideways movement of the ram (900 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data & Information: Pgodpfxjy Hrkuo Ag Dok ==== General Information Design: Workshop press Pressing force: 150 t (adjustable option) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Clear depth: 400 mm Daylight: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Approach speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Lever control Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Dual-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, mounting press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for our hydraulic systems.

Condition: new, Year of construction: 2026, pressing force: 120 t, DURENDUS 120 T Workshop Press – Single-column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered on behalf of a customer. We can offer you this machine from stock or manufacture it new – including consideration of individual options. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €6,450 net Options (on request): The listed options are based on realized customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is most often extended with additional equipment and project-specifically configured. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Pressure adjustment - Lateral movement of the ram (900 mm) - Press brake tool - Anti-rotation cylinder with manual stroke adjustment - V-profile straightening fixture in combination with table plate - LED lighting - Foot pedal - Cooling ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working Area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeam with bolt locking Chain mechanism for table adjustment Pressure gauge for pressure display Emergency stop switch CE certification Two-coat paint finish according to RAL Psdoy Hqwgopfx Ag Djgk ===== Press-in, press-out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they also fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our core strength is in special purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 100 t, DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered to a customer as a custom order. We can supply you with this machine from stock or manufacture it new – with pleasure, also taking into account specific individual options. This is a hydraulic workshop press suitable for pressing, straightening, and assembly operations in workshop and industrial settings. Base price: €5,990 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine for each specific application. The base machine is a functional standard version – in practice, it is often equipped with additional features and configured project-specific. - Table plate with X-shaped T-slot 650 × 900 × 90 mm - Pressure adjustment - Lateral displacement of the press ram (700 mm) - Bending tool - Anti-rotation cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling ===== Technical Data + Information: ==== General Information Design: Workshop press Press force: 100 t (optionally adjustable) Total weight: approx. 900 kg Dimensions (W × D × H): 1,600 × 900 × 2,550 mm ==== Working Area Clear width: 1,000 mm Open depth: 350 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,000 / 620 mm Ram stroke: 400 mm Cylinder diameter: Ø 190 mm Piston rod: Ø 115 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.5 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Pgedpfsy Hqqaex Ag Dok Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer coating according to RAL ===== Pressing, pressing-out, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed the Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety standard NR 12, which is based on these. Our core strength is custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulic systems mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 80 t, DURENDUS 80 T Workshop Press – C-frame Press – 900 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered to a customer-specific order. We can supply this machine from stock or manufacture it new for you – also taking your individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial settings. Base Price: €4,990 net Options (on request): The listed options are based on realized customer projects and enable precise adaptation of the machine to the specific application. The base machine provides a functional standard configuration – in practice, it is usually expanded with additional equipment and project-specific configuration. - Table plate with X-shaped T-slot 600 × 900 × 30 mm - Pressure adjustment - Lateral movement of the press ram (600 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Footswitch - Cooling ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 80 t (optionally adjustable) Total weight: approx. 800 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working Area Pgodpfx Aoy Hqlqeg Dek Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Usable cross beam width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 180 mm Piston rod: Ø 100 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 7.5 mm/s Return speed: 10.9 mm/s ==== Hydraulics & Drive Pump capacity: 11.5 l/min Motor power: 3 kW Hydraulic tank: 24 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 3.5 kW ==== Equipment Height-adjustable cross beams with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-coat paintwork according to RAL ===== Pressing, extraction, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, single-column press, assembly press, straightening press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian National Safety Standard NR 12, which builds upon these standards. Our major strength is custom machine engineering and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses mainly use components from leading European manufacturers.

Condition: used, Year of construction: 2001, Amada HFE 80-25 SL Hydraulic Press Brake. S/No. VO11137 (2001), Remanufactured JTES 2018 Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Pgsdpfx Aey D Rhyjg Djk

Condition: used, Year of construction: 2022, Bystronic Xpress 80/2100 Hydraulic Press Brake. S/No. Xpress 22334EU (10/2022), Max Press Force 800KN, Max Working Length 2100mm, Max Stroke 200mm, Machine Weight 6000kg Psdpoy D Rbaofx Ag Dogk Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake. S/No. XACT 22040SE (02/2022), Max Press Force 1600KN, Max Working Length 3100mm, Max Stroke 200mm, Rapid Approach, 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 10,500kg Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Pedpfxsy D N R Ho Ag Dsgk

Condition: used, Year of construction: 2021, Bystronic Xact Smart 225/4100 Hydraulic Press Brake. S/No. XACT21278SE (08/2021), Max Press Force 2250KN, Max Working Length 4100mm, Max Stroke 200mm, Rapid Approach 140mm/s, Working Speed 1 - 10mm/s, Return Speed 115mm/s, Machine Weight 15,000kg Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Pgsdpfey D N Rajx Ag Dek

Condition: good (used), machine/vehicle number: 3380, Year of construction: 2023, load capacity: 33,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 6,800 mm, total width: 3,430 mm, operation weight: 41,580 kg, additional equipment features: Particle filter, Equipment: lighting, Kalmar DCG330-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00-25 Wheel size – Steering wheel: 16.00-25 Pgedpfx Ajyuidgog Djk

Condition: good (used), machine/vehicle number: 3152, Year of construction: 2005, load capacity: 16,000 kg, lifting height: 4,540 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 1,600 mm, total length: 5,700 mm, total width: 2,550 mm, additional equipment features: Dual tread, Equipment: lighting, Kalmar DCE160-12 from Uniktruck Wheel type – Drive wheel: Supersoft Wheel type – Steering wheel: Supersoft Wheel size – Drive wheel: 12.00-20 Pgodpjyuh Rlefx Ag Dek Wheel size – Steering wheel: 12.00-20

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm Pgedpfx Aged S D Dnj Dsk -Length: 3020 mm -Weight: 22 kg

Condition: used, mileage: 327,000 km, power: 177 kW (240.65 HP), first registration: 11/2014, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, * Net price * Automatic transmission * Leaf / Air suspension * Air conditioning * Hill start assist * Drop sides * Lashing eyes * LxWxH: 7.34 x 2.49 x 2.50 * Unladen weight: * German vehicle * Good condition WhatsApp: Errors and prior sale reserved!! Sale takes place with exclusion of any warranty!! - We speak Russian - We speak English - We speak Polish Psdpfjy Hm Dpjx Ag Dsgk

Condition: good (used), machine/vehicle number: 2258, Year of construction: 2021, load capacity: 16,000 kg, lifting height: 6,090 mm, mast type: triplex, fork carriage width: 200 mm, fork length: 2,440 mm, total length: 5,510 mm, total width: 2,550 mm, operation weight: 23,052 kg, additional equipment features: Hyster Tracker, Equipment: lighting, Hyster H16.00XD-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Pgodpfxeyuhl Ao Ag Dok Wheel size – Drive wheel: 12.00-20 20 PR Wheel size – Steering wheel: 12.00-20 20 PR

Condition: good (used), machine/vehicle number: 20339, Year of construction: 2018, load capacity: 25,000 kg, lifting height: 4,360 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 3,500 mm, total length: 6,280 mm, total width: 3,300 mm, operation weight: 37,570 kg, Equipment: lighting, Hyster H25.00XM-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 14.00-24 Pedeyuhinspfx Ag Dogk Wheel size – Steering wheel: 14.00-24

Condition: new, Year of construction: 2026, pressing force: 60 t, DURENDUS 60 T Workshop Press – Single-Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered to a customer. We can supply this machine from stock or manufacture it anew – including any custom options you may require. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €4,550 net Options (upon request): The options listed are based on previous customer projects and offer targeted adaptation of the machine to suit specific applications. The base machine represents a functional standard version – in practice, it is usually equipped with additional features and tailored according to project requirements. - Worktable with X-shaped T-slot, 600 × 900 × 30 mm - Pressure regulation - Lateral displacement of the press ram (600 mm) - Bending tool - Anti-rotation cylinder with manual travel setting - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data + Information: ==== General Specifications Design: Workshop press Pressing force: 60 t (optionally adjustable) Total weight: approx. 750 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working Area Clear width: 900 mm Open throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 150 mm Piston rod: Ø 95 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 8 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 8.5 l/min Pgjdpfx Agoy Hi D Ej Dek Motor power: 2.2 kW Hydraulic tank: 22 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2.5 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Dual-layer coating according to RAL ===== Press-fitting, pressing out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian safety regulation NR 12, which extends upon these standards. Our key strengths are in the field of special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. The hydraulics of our presses primarily utilize components from leading European manufacturers.

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Psdpfx Agoyutvyo Degk About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, Joos vacuum table with silicone membrane Versatile press suitable for veneering, coating, form gluing, 3D veneering, and edge banding, among other applications. With certain limitations, this press can serve as an alternative to a hydraulic veneer press. Features a new, heat-resistant silicone membrane—extremely stretchable and easy to clean. Also suitable for thermoforming preheated thermoplastic materials such as acrylic glass or solid surface materials. Internal frame dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm. Working height approx. 900 mm. Equipped with a Becker VT4.40 vacuum pump, 400V, 1.5 kW with 40 m³/h output, and two 200-liter vacuum tanks for convenient operation and rapid evacuation. Electronic vacuum pressure switch automatically stops the pump once the preset vacuum is reached, preventing continuous operation. Mobile on four lockable swivel casters. Frame can be easily lifted and secured with two catches. Double-frame design allows for fast membrane exchange. Currently fitted with a new silicone membrane. The grooved base plate ensures rapid vacuum distribution. CE marking. Original paintwork, with touch-ups in some areas. The silicone membrane and base plate have been replaced – the machine is immediately ready for use. Psdpfxey Hl Hps Ag Degk Dimensions approx. 3100 x 1550 x 1020 mm (LxWxH). Weight approx. 550 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse – see “More offers from this seller.”

Condition: used, Year of construction: 1997, functionality: fully functional, Nominal force: 500 kN Max. eccentric load: 80 kN Max. bending length: 2000 mm Table length: 2000 mm Table width: 60 mm Table height: 965 mm Clearance between press beams: 370 mm Stroke: 100 mm Throat depth: 400 mm Distance between columns: 1690 mm Max. pressure: 31.6 MPa Number of cylinders: 1 Pjdpfxey Hqkas Ag Djgk Oil capacity: 45 l Motor power: 6 kW Max. approach speed: 79 mm/s Max. working speed: 10 mm/s Max. return speed: 80 mm/s