Used Cylinder Head Pressure Testing Machine for sale (79,923)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0032703, Accessories: - Reference plate 63.3 HRC Duedpfjx E U U Hjx Ad Nst - Reference plate 58.5 HR30N - Test weights 150, 100, 60, 45, 30 kgf - Preload weight - V-anvil - Spirit level - Diamond indenter - Steel ball indenter 1/8" - Steel replacement balls 1/8" - Dust cover - Operating manual The diamond indenter is slightly damaged below the tip (minor chipping – see photos).

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg. Dedpfsm Rg Npjx Ad Neut

Condition: good (used), Year of construction: 2008, Mabeg Feeder SPS UV2 + C: UV Drying tunnel with material cooling Dusdpew Eb Uajfx Ad Net Automatic Stacker: SPS AUTOSTACK 2

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Width: 1850 mm Dsdpfx Adow Sdwio Njut Height: 1800 mm Depth: 1200 mm

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Dsdoxpq Nljpfx Ad Nout Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: refurbished (used), functionality: fully functional, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single flank rolling tests on bevel gears with evaluation Picture shows machine in actual condition as retrofit / modernized. Performance description: Wheel diameter: 450 (300) mm Dodpfx Adstncnho Nsut Axle angle: 90 degrees Hypoid: +/- 60 mm Space requirement approx.: 1.4 x 0.8 x 1.5 mm Machine weight approx.: 1,100 kg Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to prior sale

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis Dsdpfxswn D Uhs Ad Njut For technical questions and further information, you can contact us at any time.

Condition: used, Article Description: Electric Test Cylinder Manufacturer: Zwick / Roell Model: BX1-EZ010.A1K-000 10 KN with test frame control electronics 2 x force transducers test software user manual Item Condition: used item Scope of delivery as shown in the pictures Contact us if you have any questions Shipping: The stated shipping costs apply to deliveries within Germany Worldwide shipping (please ask for shipping costs outside of Germany) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to a shipping within Germany Sale only to business customers without any warranty or guarantee Djdpfjwp Hr Ssx Ad Nsut Deviations from technical data as well as errors in the description of the articles may occur and are reserved.

Condition: good (used), SAIMP fast head milling machine Visualizer included Duodpjimq Eqefx Ad Not Complete with vise

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm Dsdpst Hw Aaefx Ad Nout max. module 34 min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module Djdpfxet Hw Ebe Ad Neut total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 min. module 1,5 total power requirement 1 kW Dsdpfot Hwptjx Ad Nsut weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: like new (used), Year of construction: 2003, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, total width: 24,000 mm, total length: 52,000 mm, total height: 10,500 mm, overall weight: 2,000 kg, air pressure: 6 bar, compressed air connection: 6 bar, drill diameter: 180 mm, working height: 1,050 mm, 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Technical data: glass thickness 2-50 mm bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm maximum measurement machine frame to drilling center: Dodpfxsrg E Hce Ad Neut

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm Dsdpfx Adjvxwxcs Nout CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll Dodsxw D Udepfx Ad Nsut - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Dusdpfjw Slcgex Ad Njt Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Duodjw Slbvjpfx Ad Njt Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Professional embroidery machine model HE1504: Heads: 4 Needles: 15 Applications: hats / t-shirts / flat embroidery / etc. Embroidery area: 400 x 450 mm Hat embroidery area: 270° Maximum speed: 1000 SPM Motor: Servomotor The embroidery machine comes with: Frames in various sizes, including one for hats; Duodpfx Aderfnq Se Njt Bobbin winder; Additional table for large-format working; Case with various tools for machine operation. Brand new, available for immediate delivery!

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range: 25 – 85 mm Vertical stroke of master gear slide: 40 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Duedpfx Aewkgr Ied Not Diameter of measured gear, max. (clamped between centers): 80 mm Maximum distance between centers for clamping of measured part: 200 mm Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Standard master gear arbor, diameter: 12,7 mm

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range for basic slide: 16,5 – 90 mm Vertical stroke: 50 mm Dujdewkhmtepfx Ad Not Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Measuring accuracy: up to 1 μm Standard master gear arbor, diameter: 12,7 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Ball and cylinder forming machine Brand Vemag Model BallControl XXL Year of production 2021 ⁃ For forming meat balls and cylinders ⁃ Capacity up to 200 strokes per minute depending on portion size for unfilled products ⁃ For connection to the main VEMAG HP-E series filling machine Flow distributor ⁃ Base unit, flow distributor pipes, connecting pipes in a stainless steel housing, ⁃ The distributor is mounted on a movable slider, which facilitates assembly and disassembly, ⁃ Servo drive of the cut-off plates - with full control via the VEMAG filling computer, Dujdpev Ihd Uefx Ad Njt ⁃ Metal safety guards, ⁃ Mobile design, ⁃ Frame made of stainless steel, ⁃ Dosing directly onto a 1 x 1 m tray, ⁃ Dosing onto a 1 x 1 m tray ⁃ Belt width 1000 mm, ⁃ With metal tray dispenser 1m x 1m ⁃ Trolley for dismantled parts for washing and hooks for hanging molding sets x 2pcs.

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm Dsdpfxoucpqtj Ad Njut

Condition: new, Year of construction: 2025, HEAD AND TAIL BAND MACHINE Duodoh S Uv Ejpfx Ad Njt MAGRAF KV-10 PLUS

Condition: new, Year of construction: 2025, HEAD BENDING MACHINE Model; MAGRAF KV-10 Dusdpfx Aedif Ized Nst

Condition: as good as new (ex-display), 20 pcs Cylinder arm machine for leather -1 needle -Thread trimmer Dodpfxoikqpkj Ad Nsut -3 transport -220v -Efka motor