STOP CYLINDER SCREEN PRINTING MACHINE

SPS Vitessa XP2

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Dodpfjrp D Nlox Af Hsla Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Fully overhauled Dljdpjriui Tefx Af Hea

Condition: good (used), Year of construction: 2000, operating hours: 46,516 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATED MACHINE • TYPE : EK 102-50 • SIZE : 102 x 114 Dledpfovm Ab Ejx Af Hja • YEAR : 2000 • WORK : 46.516 Hours DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Electrical Cabinets Very Good Condition Available Immediately

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available Dodpfx Afjxbyf He Hjla - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm • Weight: 240 kg

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: RV014301, Year: 2001 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 420 x 297 mm Maximum printing size: 1050 x 730 mm Sheet thickness: 0.075 - 0.8 mm Maximum feeder height: 675 mm Maximum feeder capacity: 600 kg Feeder speed: 400 - 3,000 sheets/hour Screen frame outer dimensions: 1300 x 1170 mm UV dryer Dlodpfx Afjxy E Dxj Hoa Equipped with: - Stream Feeder - Pull Side Lays - Suction Feed Belt - Deep Pile Delivery - Natgraph 2-lamp UV dryer with hot air module - Trumax Hyperstack Technical specifications: Maximum mechanical speed: 1,000 - 3,000 sheets/hour Maximum sheet size: 1,020 x 720 mm Minimum sheet size: 560 x 370 mm Printing speed (IPH): 900 ～ 3,300 Print thickness: 0.1 ～ 0.8 mm

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Dlsdpfx Ajvy Aipjf Hsa Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee Dlodpfxerllhko Af Hsa

Year of construction: 2007, condition: excellent (used), functionality: fully functional, For sale 4-colour offset rotary press GOSS M 600 C for printing magazines, books and advertising prints in large editions from 2007, with a mechanical capacity of 55,000 copies/hour. Equipment: - JF-55 faller - OMNICOM control system - Autoplate – automatic plate changing Dlsdpfxexp Ebce Af Hja - QUADTECH registration and cut-off control system - Closed colour loop - CCS ICON QUADTECH - Automatic blanket cleaning - Baldwin - Print silicone application - Gluing system for inserts – Robatech - Receiving and cutting of inserts - Muller Martini - Cross Stacker - Muller Martini - Central trimming waste extraction - Ecocool dryer - with integrated afterburner and heat recovery - Shaftless drive

Condition: good (used), Year of construction: 1998, functionality: fully functional, In Production SWEDEN; year: 1998 Size max: 1400×1100 mm Min size: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Thickness: 0.6-10mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on the materials: up to 1500 sheets/hour, Dlsdpfxev Ta Txj Af Hea The machine was technically sound at the time of dismantling. Cleaned. Dismantled.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Faster than the equivalent sliding-table press, the fixed-table Printmaster is perfect for medium and long production runs, delivering excellent quality results with virtually any material up to 4 mm thick. And because the machine prints incredibly fast, the Printmaster is undoubtedly the best on the market. Among its many sophisticated features is the patented dual gripper system that ensures perfect registration and quiet operation. The Printmaster can also be equipped with various optional systems and accessories that make it even more versatile, faster and easier to use. Integrated PLC control system. Independent LCD touch panel with setting and monitoring of printing parameters: - Job parameter storage system. - settings diagnostics. - Variable stroke lengths of scraper and flood coater. - Adjustable clamp, scraper and flood coater speeds. Motorized off-axis contact adjustment. Hardened, self-balancing stop points combined with "locking" fingers for material control. Maintenance-free toothed belt drive for the scraper carriage. Double gripper bar shuttle system. Folding feed table. Fiber-optic registration control. Prepared for the addition of a feeder. High-strength steel lifting columns. Anodized aluminum work surface. Printing frame insertion. Multi-purpose self-adapting clamps. Pneumatic scraper pressure equalizer. Pneumatic scraper and flood coater changeover. Pneumatic clamping of printing frame and back bars. Horizontal flooding. Choice of flooding: immediate or delayed. Timer for machine stop to allow peeling action. Djdpfx Ajuptf Asf Hjla Adjustable peeling at 6 levels. Adjustable blowing system. Foot pedal.