Used Danfoss Hawe Hydraulikmotor for sale (203)

Condition: excellent (used), em: D-8061-Flowmeter-Siemens/Danfoss MAG1100 F, Digital MAGFLO Flow meter Type MAG 6000 Transmitter with touch display. Secondhand size DN15 (1/2") Max. flow: 20m3/h Max. Press: 20 Bar/290 psi Max. Temperature: 130 c/166 f Min. Temperature: -30 c/-22 f Year 2012 Input 60 V max 0.125 A For more informations please contact us! Blodsirfbwepfx Af Roh From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: excellent (used), Year of construction: 2015, Lahntechnik KES 04F1-01 Slide-in Chiller Manufacturer: Lahntechnik Designation: 154688 Type: KES 04 F1-01 Rated Voltage: 400 V Rated Current: 9.68 A Rated Power: 4.55 kW Control Voltage: 24 V DC Protection Class: IP 54 Rated Cooling Capacity: 4.0 kW Refrigerant: R134a Max. Operating Pressure of Refrigeration Circuit: 25 bar Weight: 100 kg Bjdox Rp Rtspfx Af Relh Year of Manufacture: 2015 Grundfoss CM5-3 A Multistage Centrifugal Pump Danfoss MTZ28 JE4AVE Compressor Swep B10THx20/1P-SC-M Plate Heat Exchanger Further items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. Bsdjwl Afyopfx Af Rjlh If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English.

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg Bsdpfxex Tdyze Af Rslh 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Year of construction: 2010, condition: refurbished (used), Span approx. 6.5 m Lifting height under pulleys approx. 6.0 m Total height approx. 7.9 m Blodpfx Aemdrymef Rjh - Tyres 16.00-25 N°4, 10 kg/cm², 2 of them driven - 2 hoists separately and jointly controllable - Iveco diesel engine 74 kW, 2200 rpm - Hydraulics Bosch-Rexroth, Sauer-Danfoss - Electrical control Siemens, Télémécanique - Operating hours only approx. 600 hours

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Bjdpok Sgwaofx Af Rolh Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 20,800 mm, total length: 7,890 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth Bsdpfx Afox Avyce Relh - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, SAB163BF Screw Unit Amonia with HELMKE 90KW motor/2985/3550rpm frequency driven with oil separator OHU6022D Total refurbished in 03/2020 Bodjxawpyjpfx Af Relh Running hours since refurbishment: 17724h Cap.= 289 KW at -30C°/+40C° Swept Volume= 1404/1689m3/h with Siemens Control and Danfoss frequency converter

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) Bodpsgu N Alsfx Af Relh -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 2550 mm Press force: 135 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2100 mm Forward speed: 120 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 150 liters Main motor power: 7.5 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 850 mm Table width (G): 110 mm Length (L): 2950 mm Height (H): 2200 mm Width (W): 1500 mm Weight: approx. 6000 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: Bedpfogu Nzrjx Af Relh -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2025, Delivery ex works TR Cutting length: 3030 mm Sheet thickness (42kgf / mm): 8 mm Sheet thickness (70kgf / mm): 4 mm Cybelec Cybtouch 8 touchscreen CNC control All-steel welded construction Automatic cutting angle adjustment Automatic cutting gap adjustment Working table with roller balls Hold-down-system Hardened and grounded upper and lower blades with 4 cutting edges Foldable front finger guard (CE compliant) Bljdpfxjgu Nu Es Af Rjh Adjustable cutting stroke length 1 meter angle stop on the left with scaling 1 meter front sheet metal supports (2 pieces) CE light curtain on the rear of the machine (900 mm) Cutting line lighting Bosch Rexroth or Hoerbiger / HAWE hydraulic system Bosch Rexroth or ECKERLE hydraulic pump SIEMENS / Schneider / ABB / Omron Electronic Components Documentation in German or English CE conformity

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and stepless frequency conversion controlling. Including infeed conveyor, no product no bag function, easy change of packaging size. WEINVIEW Touch Screen, OMRON Relay, SCHNEIDER AC contactor, PANASONIC servo driver and motor, DANFOSS frequency converter. - Specifications: bag sizes: L(100-230)xW(100-150)xH(40-100)mm; max. speed of the machine in neutral: 50 cycles/minute; power: 380V, 3.7kW; machine dimensions: L3560xW5885xH1925mm; 3300kg. Bjdpfx Ajv Nmbnof Rolh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and PLC. Including infeed conveyor, no product no bag function, easy change of packaging size. SIEMENS PLC, WEINVIEW Touch Screen, OMRON Relay and Coder, SCHNEIDER AC contactor, PANASONIC servo driver and motor, DANFOSS frequency converter. - Specifications: Bag sizes: L(100-230)xW(100-200)xH(40-100)mm; max. speed of the machine in neutral: 40 cycles/minute; power: 380V, 3.6kW; machine dimensions: L3560xW5885xH1925mm; weight: 3300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Blsdov Nmbbopfx Af Roh

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Bsdpfxex A Nn Te Af Rolh Volvo Dynamic Steering (VDS) 330 L aluminum tank, right side AdBlue tank usable volume 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Step E - onboard diagnostics Cab color: Signal White Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side Front mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic switching between daytime running and dipped beam Automatic headlight leveling LED daytime running lights, “V-light” Front LED fog lights Static LED cornering light Two LED roof beacons (orange), mounted front of cab roof Cab roof penetrations, both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from steering wheel Roof antenna and CB radio preparation Accessory mounting rail, front Original manufacturer emblems/type designations Emission type plate (Euro...) L-plate (low noise vehicle -96) Flatbed body as steel/welded construction, permanently mounted, low-profile design Length approx. 4,800 mm, width approx. 2,480 mm Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning 6 stakes pockets per side (3 per side) Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled Sturdy front wall consisting of welded frame with recessed stake storage pockets Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color Toolboxes between the rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space Sand-blasted, powder-coated and painted in vehicle color Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20 for twin-line operation with folding sheave and accessories. Infinite slewing range All hydraulic cylinders double acting Piston rods hard chromed Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°) Electronic overload cut-off system with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff and optical alarm at 90% and 100% Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (180l) with filter

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Bljdpox A Npdsfx Af Roh Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Bsdpfx Asx A Nntjf Rolh Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 Bledpfxowmh Hrs Af Roh IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel Commercial tonnage: 35 t Main wheelbase: 2,980 mm Wheelbase between front axles: 1,795 mm Wheelbase between rear axle and trailing axle: 1,350 mm Exhaust silencer, side-mounted, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side 1-cylinder air compressor, 360 cc, with economy system Pneumatically regulated air processing Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency brake assist Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard light activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e Heated fuel filter for fuel up to purity class 25 Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge) Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double linkage system with PROLINK (overbending articulated arm up to 12°) Electronic overload switch-off with FX900 FASSI stability control FSC including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load-holding valves XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m Outriggers operable via radio control with proportional control block IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Bljdpfxjwllmao Af Rjh Standard color RAL 3020 traffic red - all cylinders painted black Load hooks and mounting shackles (short / 500mm) Transport position: folded transversely to the direction of travel Attention: Observe vehicle voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II IE742 connection box Low-profile subframe 180° hydraulically tiltable outriggers / both sides Control system for auxiliary function "winch / xhe-dynamic" Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on articulated arm LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support beams) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Bledpfx Afju A T Hzs Roh Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions Bedpfx Ajw Dgi Tef Rjlh - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, Hydraulic power unit with HILMA hydraulic pump Hydraulic power pack, hydraulic unit Type: 5034-4302 Operating pressure: max. 500 bar Flow rate: 1.2 litres/min. Bedpfoxf Uyyex Af Rolh Motor power: 0.75 kW Tank capacity: approx. 4.5 litres Power supply: 400 Volt, 50 Hz - HAWE piston pump, type R 1.5 - 1 piece HAWE 2/2-way valve, type WGR 2-1 (230 V DC) - Pressure regulator Required space (L x W x H): 280 x 260 x 480 mm Net weight: 25 kg Good condition

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 38,900 mm, total length: 9,800 mm, · Drehung 360 Grad (durchgehend) · Nennleistung 175 kW (238 PS) bei 2.300 U/min · Max. Drehmoment 975 Nm bei 1.380 U/min · Hubraum 5,13 l · Zylinderzahl 4 in Reihe · Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung · Kühlanlage Wassergekühlter Ladeluftkühler · Antrieb: Hydrostatisch · Modell Danfoss / Rexroth · Max. Druck 480 bar · Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. · Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt · Typ Achsen mit Planeten-Endantrieben · Hinterachse Lenkende Pendelachse mit hydraulischer Sperre · Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad · Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt · Feststellbremse Negativbremse, hydraulisch betätigt · Reifengröße 445/65 R22,5 · Max. Fahrgeschwindigkeit 40 km/h · Max. Zugkraft am Lasthaken 152 kN · Steigfähigkeit 65% · Wenderadius (mit Gabelzinken) 6.970 mm · Dieselkraftstoff 270 l · AdBlue 40 l · Motoröl 16 l · Kühlflüssigkeit 40 l · Max. Betriebsdruck 350 bar · Anlagentyp Load sensing · Betriebspumpe Danfoss / Rexroth - Verstellpumpe · Verteiler für Ausleger- und Oberwagenbewegungen Danfoss - Elektroproportionalventil SIL 2 · Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren · Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie Bedpfx Aoxd E Npof Rslh

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Blsdpfjxwp S Iex Af Roh Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Bock, Bitzer, Carrier, L'Unite, Danfoss in stock Bodpfjw Nf S Aex Af Rolh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of cooling: air, overall weight: 2,310 kg, total width: 1,100 mm, total length: 4,400 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 265.5 kW (360.98 HP), HEAT PUMP KEYTER KWE6270QEP4W 265,5 Kw Heating capacity: 265.5 kW / 75.6 tons (40/45 — 7°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Condenser: Copper / Aluminum Heat exchanger: Plate Type of refrigerant: R410A Blodpfx Afevf Ebxo Roh Compressors: 2 pcs. DANFOSS DSH240A4APC + DANFOSS DSH295A4APC (scroll) Number of fans: 3 pcs. EBMPAPST A3G800-AU25-01 Hydraulic module: 2 pcs. water pump EBARA 30/1 50-160/7.4 expansion vessel. Weight: 2310 kg. Dimensions: 4.4 x 1.1 x 1.8 m. Working hours: 1024/1024/1477/1474 h. Condition: Excellent