Used Dms Gripper for sale (1,225)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine Hjdpfx Abjzt Nbzefjfk - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Year of construction: 2023, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Magni hydraulic telescopic boom JT 2500 I / 2.5 tons / suitable for RTH & TH series / year of manufacture: 2023 / NEW / in stock & immediately available Price: €7,890.00 net / €9,389.10 gross - Max. load capacity, retracted: 2,500 kg - Max. load capacity, extended: 1,500 kg - Length, extended: 2,690 mm - Length, retracted: 1,790 mm - Automatic attachment recognition: yes This attachment is suitable for the RTH and TH series. Product code: ATT-04-021 We have many other attachments for Magni in our warehouse that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Hfodpfxezr Tw Ds Abfjk In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 022235 = Further information = New: Yes Please contact Marius Herden for further information.

Year of construction: 2025, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Holp Vario bucket VL.112.700 / MS10 / HARDOX / Wear plates / Year of manufacture: 2025 / NEW / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Excavators from - to: 14 tons – 25 tons - Own weight approx.: 570 kg Hedpjzr Twwjfx Abfsfk - Capacity SAE: 700 liters - Angle of repose: 54 ° - Radius of excavation base: 150 mm - Incl. wear plates - The bucket is made entirely of HARDOX. Advantages of the Holp Vario bucket: - Large surfaces - Robust design with high-quality materials - Minimum weight due to optimized triangular construction - Round base - Two working openings - Rectangular working opening - V-shaped - The Vario bucket impresses with high performance and clean operation. It enables precise dumping through the V-shaped opening and offers very high excavation performance in drag operation. Wherever more speed and flexibility are needed when handling a wide variety of tasks, the Vario bucket is a real asset on the construction site: it is faster, more adaptable and safer. We have many other Holp products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! Internal ID: 501171 = Further information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Marius Herden for further information.

Condition: excellent (used), cutting dimensions: 4300x4300mm label printer 4 air tables table length: 2.2m 7 grippers pneumatically extending supports for cutting veneered boards unit for angled cutting main motor power: 18kW trimmer motor power: 2.2kW cutting height: 125mm saw carriage feed rate: 0-150m/min pusher beam feed rate: 0-90m/min control system: CadMatic 4.0 year of manufacture: 2011 operating hours: 5800h Hjdpfx Abjzuk S Rsfofk 6-month warranty on mechanical parts!

Condition: excellent (used), Cutting dimensions 4300x4300 mm label printer 4 air tables table length 2.2 m 7 grippers pneumatically extendable stops for cutting veneered panels angle cutting unit main motor power 18 kW scoring saw motor power 2.2 kW cutting height 125 mm Hjdpfx Abszuk Sksfofk saw carriage feed speed 0-150 m/min pusher beam feed speed 0-90 m/min control system: CadMatic 4.0 year of manufacture 2011 operating hours: 5800

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 7000 is a fully automated portal nailing machine for the flexible production of pallets and crates, even with large workpiece dimensions. With up to three individually adjustable nailing head pairs, two work areas, and a generous Y-axis travel of 1,250 mm, it is designed for maximum efficiency and high flexibility. A 12-inch touch display, automatic height adjustment, and numerous expansion options support user-friendly operation. Offline programming allows new programs to be created and simulated outside the machine, reducing setup times and preventing downtime. The integrated automatic path optimization further increases the cycle output and ensures resource-efficient operation. Applications: Standard stringer and block pallets Special pallets & custom solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Crate walls & wooden packaging Nailing bridge with rotary table: Robust frame construction with a tilt angle of 65° for ergonomic operation Machine length: approx. 7000 mm Rotary table with 2 work areas: Work area per side (L x H): 3000 x 1700 mm Cladding of the rotary table with plywood panels for custom templates Option: Clamping brackets for use with custom templates Option: Modular pallet clamping system for inserting loose boards and blocks Frequency-controlled nailing bridge: Up to three independently controlled nailing head pairs for complex nailing patterns Accommodation of up to 6 nailing heads Coverage of the entire work area with the nailing heads Collision monitoring: The movement of the feed cylinder is constantly monitored Nailing heads: Industrial nailing heads or hand-held devices Nail length max.: 130 mm Equipment of the nailing heads with Maxi-Coil magazines for up to 1000 nails Nailing shoes for limiting the insertion depth Option: Stapling devices, drilling heads Robot: Type: Kuka KR210 R3100-2 (Alternatively: similar manufacturer or refurbished robot possible) Gripper with clamping jaws for pallet removal and stacking Product weight max.: 80 kg Stacking height max.: 2800 mm Normal and interleaved stacking Option: Retrofitting the robot at a later date Buffer conveyor (Optional): For buffering several pallet stacks Hfodperallrjfx Abfjk Fully enclosed by a robust plastic modular belt Programming: Simple, intuitive programming on the 12-inch touch panel directly on the machine. With the entered parameters, the pallets or crate parts are completely recorded or visualized. Programming of the removal and stacking process via robot is also done directly on the touch panel – no robot knowledge required by the customer. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German and English Option: Board width measurement for decreasing board widths Safety equipment: Safety fence around the entire system including access monitoring Emergency stop button on the outside of the machine and on the control panel Safety laser scanner to protect the rotary table Safety light curtain for pallet removal

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Hfjdpfx Ajycckcebfek Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Year of construction: 2014, condition: used, Year of manufacture: 2014 New: No Attachment suited for: Construction machines General condition: very good Technical condition: very good Visual appearance: very good Please contact Ernst van Hek for more information Hjdpfeylkg Djx Abfsfk Engcon EC30 Tiltrotator (2014) with Integrated Gripper Boost the efficiency and versatility of your heavy excavator with this robust Engcon EC30 tiltrotator. Previously mounted on a Komatsu PC240, this unit comes equipped with the highly desirable integrated grapple cassette, making it a perfect all-around tool for demanding groundworks. Specifications & Features: – Make & Model: Engcon EC30 – Year of Manufacture: 2014 – Previous Machine: Komatsu PC240 (Suitable for excavators in the 22–33 ton weight class) – Upper Mounting: Fixed (Pin-on direct mount) – Lower Quick Coupler: S70 System – Additional Option Included: Integrated grapple cassette for easy handling of pipes, posts, and debris – Hydraulics: Complete with hoses and heavy-duty tilt cylinders as pictured Additional Attachments Available: Need matching tools? We also have a selection of buckets available in stock that are compatible with the S70 quick coupler system. Contact us to put together a complete package!

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: Hodezq Tzaepfx Abfefk E-mail:

Year of construction: 2015, condition: used, functionality: fully functional, Epilog Fusion 40 / 120 Watt, laser engraving and laser cutting system - 120 Watt CO2 "WaveGuide" laser source, according to the last service on August 5th, 2024, laser power 132 Watt - Working area 1016X711mm - 2" focus lens - Drive: brushless DC servo motors for crystal-clear cutting edges in acrylic glass - Max. material thickness 362mm - Max. weight of workpiece: 91kg - Laser safety class 2 - Interface: Ethernet, freely programmable IP address - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, machine LED lighting Hfjdpfovvha Sjx Abfek - Large format viewing window made of safety glass - Laser beam expansion, base frame on castors - Honeycomb cutting table - Round engraving unit for cylindrical objects with roller system Extraction: vacair UML 1350 extraction system - Recirculation system with 3 levels -Filter - Filter: particle filter HEPA H14, pre-filter cassette - Activated carbon cassette 43kg (with HEPA) - Fan output 1350 m³/h - Pressure 10,000 Pa - Separation level >99% - Suction/exhaust air nozzle DM 125mm - - Sale only to traders - Exclusion of any guarantee or warranty claims - Sale with invoice and VAT - No liability for spelling errors, typos - Sale as seen, later complaints excluded Machine in very good condition, few operating hours - Machine is very well maintained and clean New prices: Round engraving unit, built in 2019, €1840/net Laser Fusion 40 /120 watts, built in 2015, €55,000/net Vacair UML 1350 extraction system, built in 2021, €5,450/net Total: €62,300/net

Condition: used, Gripper width: approx. 550 mm. Hjdpfx Abozr D Nkofofk

Condition: used, functionality: fully functional, Gripper width: 800 mm Opening width: approx. 1,200 mm with quick-change coupling Hfodpfx Abszr D I Tjfok

Condition: used, Year of construction: 2014, turning diameter 160 mm swing diameter 210 mm turning length 210 mm Control Siemens Sinumeric 840 D Hedpfx Aboyan Riofsfk total power requirement 34/26,5 kW weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113

Condition: used, Brand : CMZ Hjdpfx Abezq Rzkofsfk Model : TL-20 Cnc : FANUC 32i Fabricate year : 2011 Distance between centers: 730 mm Bar picth: 67 mm Main spindle bore: 73 mm Max Workpiece diameter on slider: 510 mm Maximum turning diameter: 430 mm Maximum diameter on bench: 680 mm Automatic turret: Yes Motorized turret: No Spindle speed: 50-4000 rpm External dimensions: 3800x1850x1920 mm Machine weight: 5.400 KG Machine equipped with: Automatic door opening and closing Preseter Chain chip extractor Air-powered chip extractor for plastic, aluminium etc. Internal gripper holder

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,838 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2020. It features an X-axis travel of 1100 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a clamping area of 1400 x 560 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 120–630 mm • Clamping area: 1400 x 560 mm • Spindle power: 13 kW (40% DC) / 9 kW (100% DC) • Spindle torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool magazine: 30 pockets (double gripper, loaded through spindle, programmed via control panel) • Max. tool diameter: 80 mm (130 mm with free adjacent pockets) • Max. tool length: 300 mm (from spindle face) • Max. magazine load: 120 kg • Feed drives: AC drives with ball screws • Feed rate (X/Y/Z): 30 m/min • Rapid traverse (X/Y/Z): 30 m/min Additional equipment • Renishaw tool probe • Renishaw workpiece probe • Clamps/workholding set Hfjdpfx Abezibzxsfek Technical Specification Taper Size SK 40

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Like-new and excellently maintained M.A.N. 18-ton TGS flatbed truck with Palfinger PK 14.502 SH crane featuring 6-stage outriggers and a side reach of approximately 17 meters and a vertical reach of approximately 20 meters, remote control, 5 + 6 control circuits, 6.20 m long flatbed, payload 6.1 tons, 470 hp engine, wheelbase 5.50 m, with only 9,300 km, auxiliary drive, rear air suspension, intarder, air conditioning, auxiliary heater, digital mirror replacement system MAN Opti_View, and more. Equipment: 20,500 kg permissible total weight TGS TN long cab with bed and rear window Wheelbase 5,500 mm Euro 6 e engine 4x2 drive Unladen weight 11,860 kg Payload 6,140 kg at 18,000 kg permissible total weight Payload 8,640 kg at 20,500 kg permissible total weight New aluminum flatbed with split side panels and 4-way adjustable loading ramps Flatbed dimensions approximately: Length 6.20 m x Width 2.48 m x Height 60 cm Palfinger PK 14.502-SH folding crane, foldable behind the cab The crane has been inspected at a Palfinger workshop Crane inspection certificate valid until October 2026 Max. lifting moment 13.8 mt Only 610 operating hours according to the hour meter PAL com P7 remote control Engine Start/Stop with RPM increase Crane with 6-stage outriggers Slew and gripper control Oil cooler 10.5 kW Crane outreach up to 16.80 meters Lifting capacity at approximately: 4.20 m / 2,950 kg // 6.20 m / 1,840 kg // 8.20 m / 1,300 kg // 10.30 m / 970 kg // 12.50 m / 780 kg // 14.60 m / 660 kg // 16.80 m / 530 kg 2-point hydraulic support with pivoting supports Transport position monitoring HPSC additional function 2nd ballast Auxiliary drive, gear-dependent, type NH/4c, without flange, f=0.97, position approximately 3:30 Differential lock in rear axle MAN TipMatic 12.26 DD transmission MAN intarder with MAN EVBec, adjustable Transmission function MAN Idle Speed Driving Transmission function Rocking mode Air conditioning, Climatronic Water auxiliary heater, 4 kW Trailer hitch, ring spring type 400 G 150A with compressed air connections Permissible total weight of tractor and trailer 44,000 kg Trailer load 26,470 kg Front axle leaf spring, rear axle air-suspended Front axle 9,200 kg, rear axle 13,000 kg Axle ratio i=2.85 Stabilizer for front and rear axle Hill start assist MAN EasyStart Full brake assistant Emergency brake assistant EBA EBS ABS ASR ESP Lane departure warning LDW MAN Attention Guard Reversing warning Cruise control Sun visor Multi-function steering wheel MAN EasyControl control panel, 4 functions that can be operated from the outside with the door open Electric glass sunroof Electrically adjustable and heated exterior mirrors Electric windows MAN SmartSelect infotainment control with touchpad and direct selection buttons MAN Media System Professional Navigation 12.3 inch MAN Sound System Digital side mirrors Hfsdpfxsy Rwbts Abfsk Driver comfort seat, air-suspended with lumbar support, shoulder adjustment and heating Seat covers in comfort quality 2 air horns on the roof 2 rotating beacon mounts prepared Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2475

Condition: used, mileage: 20,514 km, power: 220 kW (299.12 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Like-new 18-ton Mercedes-Benz 1830 Actros truck with a loading crane and a 7.20 m long special platform body in a low-bed design, Hiab loading crane with 3 hydraulic extensions and remote control, additional 5th + 6th hydraulic control circuit, and only 125 operating hours, air-suspended front and rear axles, payload 7,580 kg, loading height approx. 1.19 m, air conditioning, automatic transmission, navigation system, GVWR 40 tons, trailer load 35 tons (technically possible). The truck has only 20,500 km on it, one owner, and more. Equipment: M-cab Classic-Space with rear window Wheelbase 5,550 mm Payload approx. 7,580 kg Weight variant 18.0 t (8.0/11.5) Unladen weight 10,420 kg Engine OM936 R6 7.7 l with 220 kW (299 hp) and 1200 Nm torque Engine Euro 6 D Drive 4x2 Loading crane Hiab X-HiDuo 092 B-3 with hydraulic 3-way extension Crane has only 125 operating hours! UVV-certified crane, next inspection in 04/2026 XS Drive remote control additional floor control Lifting capacity at approx. 3.10 m / 2,450 kg // 3.90 m / 1,840 kg // 5.50 m / 1,260 kg // 7.30 m / 900 kg // 9.20 m / 700 kg according to the manufacturer Possible crane extension with 1 mechanical extension up to 11.30 m at 580 kg for an additional charge 2-point outrigger support Rotary servo and gripper control with 5th + 6th hydraulic additional circuit Platform body dimensions: 7.20 m x 2.45 m x 0.55 m high Loading height in driving position approx. 1.19 m. Platform with split 0.55 m high aluminum side panels and folding Kinnegriprungs All-round lashing rail in the floor profile on the outside 2 large plastic toolboxes at the rear right and left Automatic transmission G 211-12/14.93-1.0 Mercedes-Benz PowerShift 3 Transmission oil cooler Predictive Powertrain Control Differential lock in rear axle Air-suspended front and rear axles Front axle 8.0 tons, rear axle crown wheel 440, hypoid 13.0 tons Axle ratio i = 3.583 Air conditioning Electronic braking system with ABS, ASR and ESP High Performance Engine Brake Active Brake Assist 5 Disc brakes on front and rear axles Lane Keeping Assist Turning Assistant Attention Assist Traffic Sign Assistant Navigation system Storage compartment in the cab Cruise control Trailer coupling Rockinger D40 with air pressure connections Permissible total weight 40,000 kg Trailer load with continuous braking system 22,000 kg Trailer load with continuous braking system 35,000 kg technically possible Trailer load with SDAH/ZANH 18,000 kg Multi-function steering wheel in leather design Work lights LED daytime running lights and taillights 290 liter aluminum tank Sun visor Comfort central locking system 2 air horns on the cab roof Electrically adjustable side mirrors and electric windows Driver's air-suspended comfort seat with velour seat covers German vehicle, one owner Top condition with only 20,500 km Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2603 Hjdjzahxgjpfx Abfsfk

Condition: used, Year of construction: 2007, Work table dimensions: 3050 x 1240 mm Passage opening: 170 mm Travel range X-Y-Z: 3500 x 1790 x 340 mm Main milling head: Electric spindle with HSK 63 F tool holder Speed range of 600 - 24000 rpm, continuously adjustable via inverter Motor power 8.5 kW from 12,000 rpm (S1) Clockwise/counterclockwise rotation Rotary axis Vector (C-axis): For use with angular gearheads. Angular gearhead Mimatik HSK 63 F Tool changer RAPID 12 (travelling type) Drilling head F11 with grooving unit - 7 independent vertical spindles (4 right and 3 left) - 4 horizontal spindles (1+1 spindles in the X-axis / 1+1 in the Y-axis) Integrated, independent grooving saw unit with saw blade DM 120 mm Work table ALU Vacuum pump 250 cbm/h Power 5.5 kW Max. vacuum (connection) 0.9 bar Control: ESA-GV KVARA 6 with Office PC User interface: Xilog Plus Operating system: Windows XP Cable remote control Hfedpfx Aozr H Ivjbfok Central extraction port: 200 mm Weight: approx. 2700 kg Space requirement: approx. 5700 x 4100 x 2600 mm without control cabinet Control cabinet 600 x 800 x 1900 mm Storage location: Supplier

Condition: excellent (used), power: 43 kW (58.46 HP), chain condition: 60 %, Year of construction: 2011, operating hours: 8,204 h, Equipment: air conditioning, rubber tracks, CATERPILLAR 308D year 2011 operation hours: 8.204 hrs. ROPS Airco Radio Monoboom Stick: 2,20 meter All hydr. lines (hammer-, gripper-, scissor-) quick coupler OQ45 1x bucket with 750mm width Hfjdpfx Abozrt Amefek U/C: approx 60% good trackshoes: 450 mm width blade support Misubishi engine with 43 kW CE Operation weight: 8,5 to.

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system Hjdpsvuw R Rsfx Abfefk - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply Hsdpfx Abozrv Dgsfefk The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode Hedpfxexzix Ae Abfsfk • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: used, mileage: 393,564 km, power: 368 kW (500.34 HP), first registration: 05/2021, fuel type: diesel, empty load weight: 14,910 kg, maximum load weight: 12,690 kg, overall weight: 27,600 kg, tire size: 385/55 22,5, tire condition: 30 %, axle configuration: 6x2, wheelbase: 4,900 mm, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 7,120 mm, loading space volume: 17 m³, loading space length: 7,120 mm, loading space width: 2,490 mm, loading space height: 960 mm, Year of construction: 2021, operating hours: 393,564 h, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, Equipment: ABS, air conditioning, cabin, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, trailer coupling, truck registration, Vehicle number for inquiries: 412411 Scania, R 500 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * ESP * Power windows * Cab * Automatic climate control * Crane * Leather interior * Alloy wheels * Air suspension * Navigation system * Lifting axle * Retarder / ZF Intarder * Seat heating * Auxiliary heater * Cruise control * On-board computer * Differential lock * Local distribution > 7.5 tons * Steerable axle * Rear-axle steering * Digital tachograph * Radio CD * OBU preparation * Air horns * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Lane change warning * Hydraulic suspension support * Rotary drive and gripper control * Remote control * Transmission type: Automatic * Suspension: Air / Air * Gross vehicle weight: 27,600 kg * Tare weight: 14,910 kg * Payload: 12,690 kg * Permissible gross vehicle weight: 27,600 kg * Tire condition, 1st axle: 30% - 30% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 30%|30% - 40%|40% - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: 30% - 30% - Tire size: 385/55 R22.5 * Wheelbase: 4900 mm * Tire sizes: 385/55 R22.5 * Interior dimensions: L = 7120 mm, W = 2490 mm, H = 960 mm * Interior volume*: 17 m² * Pallet spaces: 17 * Crane: Palfinger PK 22001L TEC 7 * Radio remote control * 2892 crane operating hours * Kinshofer pallet fork * Rear view camera * Central lubrication system * Additional grapple * On request, we will send you a video and more pictures. Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service Hsdpfx Abey S Rcysfsfk * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2010, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, overall weight: 6,700 kg, Equipment: CE marking, Biesse Rover C 6.50 Config. 3 CNC machining centre 5-Axis Description Numerically controlled machining center ROVER C 6.50 Working fields - configuration 3 :X = 4600 mm; Y = 1535 mm; Z = 275 mm Hodpfx Aszqdmajbfjfk CE Safety devices 8 ATS panel supports - L = 152 5 mm - 32 sliding bases Automatic positioning of 8 panel supports and sliding bases (EPS X-Y ) Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas in X 8 rear reference stops with a stroke of 115 mm 8 Stops with a stroke of 140 mm positioned at 1175 mm (L= 12 80 - 1525 - 1800 mm) 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. 4 removable central stops with a stroke of 140 mm (2 Lh + 2 Rh) incl. of the pneumatic system Sensor for the detection of lowered stops Pneumatic system for lifting bar supports with double pneumatic stroke 6 lifting bar supports with double pneumatic stroke (H=74mm)uniclamps Vacuum system for a 250 m3/h pump 1 x 250 m3/h rotary veins vacuum pump for standard vacuum system Composition C3-A1 Operating unit with 5 interpolating axes Prearrangement for the assembly of chip deflectors with pneumatic or inductive sensor on a 5-axes operating unit Composition C3-P2 Chain tool changer with 33 places at 120 mm center distance Iron gripper on chain toolchanger for chip deflector compatible with 5-axes electrospindle RH Chip deflector for 5-axes operating unit Liquid cooling unit for liquid cooled systems Automatic lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 196520 € 3714.23 € 2000 mm 730 mm 2000 x 600 mm 2x 1000 x 600 mm 2100 mm 5 - 30 m/min 0 - 2250 mm/min mm 685 mm 0 - 675 mm/min 0.001 - 0.04 mm 560 mm 500 - 2200 1/min 11 kW 5.5 kW 6225 mm 07 mm 2305 mm 6530 × 00 ×3350 (brutto mm 10200 kg 1600 kg 1150 kg 1600 kg Dm. 405 x 75 x 127 mm je 3,1 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Hfedpjxpizmefx Abfjk Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed 30 m/min Integrated machine body temperature control Turbide-coated double V-guides Hydraulic table drive with cooling Linear guides with recirculating ball screws and AC motors for precise positioning in the X and Z axes Automatic lubrication with a pressure switch for automatic stop in case of pressure drop Electro-magnetic chuck 2x 1000 x 600 mm Coolant system with automatic paper filter and magnetic separator (500 l) Automatic dressing device mounted on the table, without diamond, with automatic compensation Grinding wheel flange with 1 grinding wheel Grinding wheel balancing stand LED machine light Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH OPTIONS (PRICES ON REQUEST): Complete enclosure of the work area Oil mist extraction