Used Double Band Decoiler for sale (13,782)

Condition: excellent (used), Double bench grinder / grinding stone Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Redpsy Hfyijfx Ad Ast 380 Volt 1.5 kW Height without pallet: 1200 mm Width: 610 mm Depth: 400 mm Weight: 139 kg with pallet

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, We are offering this used HAAS GR-510 gantry milling machine, year of manufacture 2015. Model: GR-510 Manufacture date: 02/2015 Voltage: 354-488 V Phases: 3 Frequency: 50/60 Hz Full load current: 20 A Maximum load current: 35 A Short-circuit interrupt capacity: 10,000 A Wiring diagram: 96/0284 Short-circuit current: 5,000 A Arc protection rating: 208-240VAC models HRC-1; 360-480VAC models HRC-2 Part number (P/N): 29-10048 Rjdpfx Adeyxx Azs Aot If you have any questions or require further information, please feel free to message or call us.

Condition: excellent (used), Year of construction: 2011, input voltage: 400 V, Equipment: CE marking, Mitre Band Saw - For left mitre cuts up to 60° and right up to 45° - Cutting speed: 37 and 74 m/min. - Automatic saw frame lowering with rapid approach to the workpiece and shut-off at end of cut - Quick-release vise in T-slot, sliding for quick position change Rodpfjy Id Dcsx Ad Aot - Chip removal brush - Automatic cooling system - Machine base - Incl. 1 HSS-Biflex saw band 2765 x 27 x 0.90 mm Cutting capacity: 90° Round Ø 255 mm Square 240 mm Rectangle 300 x 180 mm 45° Round Ø 210 mm Square 190 mm Rectangle 210 x 100 mm 60° Round Ø 135 mm Square 115 mm Rectangle 140 x 90 mm

Condition: used, faceplate diameter 2500 mm swing diameter 2700 mm turning height 1600 mm turning speed range - milling 1,18 - 32,5 U/min turning speed range - milling 4,25 - 117 U/min workpiece weight 10000 kg side head - cross travel 800 mm ram head - cross travel 45 degrees - 1000 mm ram head - cross travel 30 degrees - 1000 mm total power requirement 80 kW Rsdpfjyuqidsx Ad Ast 2-Axis D.R.O. 5 positions turret

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) Rsdpfxey H Hzbe Ad Aot - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: good (used), Year of construction: 2003, Manufacturer: KASTO | Model: Funktional A | Serial Number: 6420 102 076 | Year of Manufacture: 2003 | Motor Power: 2.5 kW | Automatic metal band saw | Electric main drive | Hydraulic clamping and feed system | Integrated material feed with roller conveyor | Roller conveyors on both sides | Hydraulic material vise | Saw band guide with coolant supply | Control panel with controls and emergency stop | Suitable for bar and profile material | Dimensions: approx. 1700 mm x 1550 mm x 3600 mm (W x H x L) | approx. 890 kg | The stated dimensions are approximate. All other information without guarantee.| Grey | Steel Redpoyicg Isfx Ad Aot

Year of construction: 2009, condition: excellent (used), 3-axis cutting machine 2x blade diameter 550 mm usefull lenght 5200 mm Rodpey E N A Eofx Ad Ajt

Condition: used, functionality: fully functional, load capacity: 15,000 kg, High-quality double-girder bridge crane by STOCKER with a load capacity of 15,000 kg (15 t). Heavy-duty design featuring two massive box girders, an electric trolley (top-running trolley) with wire rope hoist, and a twin hoist system (yellow load hook visible). Suitable for mechanical engineering, steel construction, foundries, heavy assembly, and heavy-duty warehousing. Load capacity: 15,000 kg / 15 t Manufacturer: STOCKER Design: Double-girder bridge crane (top-running trolley) Drive: fully electric (hoisting, trolley, and crane travel) Power supply: conductor rail / festoon cable Condition: used, serviced, fully functional Redpoy H R Irofx Ad Aet Span, overall height, lifting height, and runway length available on request. Dismantling by specialist company required – on request, we can organize a quote.

Condition: new, new ! all stainless steel variable speed microcontroller 2 mixing directions pneumatic lid inspection gantry safety lid 11kW CE-approved Suitable for loader with “Easy Connect” Easy clean overall dimensions (l x w x h) : 2.180 x 1.000 x 1.600 mm + Loader for eurobins Rjdpjy Ex Rfofx Ad Aot

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Rsdpfx Adsxy Tm Is Aet

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Rsdpfx Aew D Aybed Aet

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Rjdpfew D Aw Hex Ad Aot Location: Nattheim

Year of construction: 1994, condition: ready for operation (used), English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible. Rodpfey Hvrijx Ad Aot

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear Rsdpoy Id Nlsfx Ad Aot - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2006, input voltage: 400 V, Mitre Band Saw - Supply voltage 400 V - For mitre cuts to the left up to 60° - Cutting speed 30+60 m/min - Carbide saw band guides - Automatic cooling system - Machine base with tool compartment - Includes 1 HSS-Biflex saw band 2140 x 20 x 0.90 mm Cutting range: 90° Round Ø 175 mm Square 170 mm Rectangular 190 x 130 mm 45° Round Ø 110 mm Square 110 mm Rectangular 150 x 110 mm 60° Round Ø 75 mm Square 75 mm Rectangular 100 x 75 mm Redpfoy H D Ifox Ad Ast

Condition: new, Year of construction: 2024, Radial Band Saw Rsdpfx Aombbivod Aot

Condition: used, Year of construction: 1998, x-travel 9000 mm y-travel 4350 mm z-travel 1250 mm Control Siemens 840D table-size 3500x2000 mm workpiece weight - double table 40 to workpiece weight - single table 20 to feeds x-axis 1-10000 mm/min rapid motion - x-axis 30000 mm/min feeds y-axis 1-10000 mm/min rapid traverse y-axis 30000 mm/min feeds z-axis 1-10000 mm/min rapid travel z-direction 20000 mm/min milling and drilling device M3-63KW / FW1250 max. torque on the milling spindle 3300 Nm Rjdpfoy E Tvpox Ad Aot power capacity - milling spindle 63 kW turning speed - milling spindle 5000 U/min c-axis 360 Grad positive location each C-Achse 0,001 von 0-360 G Grad tool taper Iso 50 numbers of tools in magazin 60 weight of tools max. 50 kg diameter of tools max. 360 mm tool length - max. 600 mm angular milling head HSD 70 C 650 M3 angular milling head - universal GSC 120 C 450 M3 vertical spindle unit VS 36 C 650 M3 vertical spindle unit VS 330 C distance between columns 2500 mm weight of the machine ca. 140 t dimensions of the machine ca. 22x11x6 m

Condition: used, Year of construction: 2003, used, good condition Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Rodpfxsyclxps Ad Ast Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Max. cutting height: 280 x 50 mm Max. blade diameter: 420 mm Tiltable manually 45° Linear feed pneumatic Digital displays for cutting length 4 x pneumatic workpiece clamps - 2 x horizontal, 2 x vertical Horizontal cylinders: 2 Vertical cylinders: 2 Required space approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, loaded on truck, unpackaged Transfer in as-is condition as inspected, without warranty or guarantee

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 Rjdovwgizepfx Ad Aet CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, cutting height (max.): 1,020 mm, cutting width (max.): 1,020 mm, control type: manual, pivoting range: 45 °, Saw frame with double column guide Saw band dimensions: 9500x54x1.6 mm Infinitely variable band speed: 20-100 m/min Cutting capacity at 0° round: 1020 mm Cutting capacity at 0° square: 1020 mm Cutting capacity at 0° flat: 1020x1020 mm Cutting capacity at 45° round: 675 mm, square: 675 mm, flat: 675 x 1020 mm Redpfxoy Hlfro Ad Aot Work height: 535 mm Hydraulic motor: 2.2 kW Main motor: 7.5 kW Coolant pump motor: 0.12 kW Length: 4500 mm Width: 1700 mm Height: 2800 mm Weight: 7500 kg Hydraulic vice Hydraulic band tension Stepless speed adjustment Linear guides Height adjustment via optical sensor Automatic saw frame lift after completion of cut Sensitive cutting pressure regulation Coolant pump Saw band Chip brush Operating manual in GERMAN or ENGLISH Hydraulic bundle clamping device Chip conveyor Rotary table for mitre cuts around the machine

Condition: excellent (used), Year of construction: 1999, total height: 645 mm, total length: 2,100 mm, total width: 3,240 mm, overall weight: 3,800 kg, DESCRIPTION: For sale: Friggi 1 MF 420 ACN automatic band saw, a benchmark for reliability and precision in the mechanical industry. This heavy-duty machine is designed for intensive cutting of solids, profiles, and bundles. Equipped with CNC control, it is the perfect solution for high-productivity environments requiring minimal operator supervision. Rsdpfey Ib Avex Ad Ajt Key Features: Cutting Capacity: Rounds and squares up to 420 mm (bundle cutting: 420x330 mm). Integrated Automation: CNC-programmable cutting cycles and automatic feeder for series production. Structural Precision: High-rigidity twin-column design prevents vibration, ensuring extended blade life and perfectly square cuts. Variable Speed: Electronic blade speed adjustment (18–80 m/min) adapts to various steel grades and alloys.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! Rodpfx Adsyzxa Ej Ast TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: ready for operation (used), Year of construction: 1982, An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Rodpfx Aey Hk Thod Ajt

Year of construction: 1998, condition: ready for operation (used), A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible. Rjdpfx Ajy Hk S Red Aet

Condition: used, mileage: 95,322 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 02/2021, fuel tank capacity: 80 l, CO₂ emissions: 252 g/km, emission class: euro6, color: silver, number of seats: 5, number of previous owners: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jun 2019 - Aug 2021 Cab: double Technical information Torque: 385 Nm Number of cylinders: 4 Engine capacity: 2.299 cc Transmission: 6 gears, Manual gearbox Top speed: 155 km/h Measures length/height: L2H2 Dimensions (LxBxH): 555 x 207 x 250 cm Weights Empty weight: 2.051 kg Carrying capacity: 1.449 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 9,6 l/100km (29 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 08/2026 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Bluetooth car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front fog lights - Height adjustable driver's seat Redpev N Engsfx Ad Aet - Height adjustable steering wheel - Loading floor - Multifunctional steering wheel - Panelling - Partition - Passenger airbag - Radio - Rear doors - Rear parking sensor - Remote central locking - Reversing camera - Sliding side door right - Start / stop system - Telephone enabled with Bluetooth - Third brake light