Used Double End Tenoner Side Sizing for sale (44,729)

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, One side tenoning machine .Face levelling saw , vertical milling cutter .Sliding table on slides .Machine wigo cast iron , stable .Heads set at an angle .Machine has a pneumatic clamping gate .Manual displacement . Pedpfx Anovfv A Hoysrb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2650x950x1850 mm Prjdpfx Anevz Ewreyjb Weight 2100 kg Total power requirement 15 kw

Condition: excellent (used), CATALOGUE NUMBER 7964 TECHNICAL DATA - max. width of workpiece: 630mm - max. thickness of workpiece: 250mm - from above: - toothed feed roller - deflector rolls - pressure roller - toothed feed roller, 2 pcs - pressure roller - 4-knife planing shaft, 630mm, 15kW - pressure roller - smooth feed roller - from below: - adjustable infeed table - toothed feed roller - 4-knife planing shaft, 630mm, 7.5kW - adjustable draw roller in the lower table, 2 pcs - electric height adjustment - lifting motor 0.65kW - 6 feed speed settings - feed motor 4kW - diameter of dust extraction nozzle 2x160mm - dimensions (L/W/H): 1780x1850x1700mm - weight approximately 3000kg ADVANTAGES - new knives installed - manufactured by the German brand KUPFERMUHLE - very good condition - used planer Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR Prjdpszx Rknefx Anyob (Prices are subject to change due to significant fluctuations)

Year of construction: 2026, condition: new, planing width 405 mm total power requirement 15 kW Weight 1900 kg Prjdpoyk Ibpsfx Anyeb

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Podpfxoxg Rhpo Anysrb

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Pedpfx Ajuqd S Asnyorb Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 1986, Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Pjdjuqdqlepfx Anyorb Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Year of construction: 1981, condition: used, pressure 63 t stroke 6-60 mm no. of strokes 90-550 Hub/min 300 mm table surface area 780x600 mm ram surface 807x460 mm tool hole in ram Ø 40 mm ram - range of adjustment 80 mm total power requirement 15 kW Podpslp U R Isfx Anyorb weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2900x2000x3000 m

Condition: used, Year of construction: 1996, machine/vehicle number: 96T233, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - Tilting blades 45° Pedpfxjqmpl Ae Anyerb - N. 2 motors 1.1 kw - Blade diam. 330 mm - V. 380/50 - S/N 96T233 - Year 1996

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x900x1700 mm Prodpfx Anevz Ezqjysb Weight 1900 kg Total power requirement 15 kw

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Psdjpp Tkfopfx Anyjrb Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1500x1650 mm Weight 2200 kg Total power requirement 40,3 kw Predpfx Aovz Em Henysb

Condition: used, machine/vehicle number: 005854, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3300 mm Prodsv Hinxjpfx Anyjb Max feed speed: 30 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: good (used), Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: -Shelf: with 3 uprights each, height 5.4 m Psdpfx Anocn Am Isyjrb -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width 910 mm upper combination unit lower combination unit two feed speeds Pedpfx Anjzxqa Neysrb belt oscillation electronic material thickness setting material thickness gauge Table with vacuum pump on the second unit Year of manufacture: 2009 New conveyor belts installed in 2023

Condition: used, Year of construction: 1999, machine/vehicle number: 99T318, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES Podpfx Aeqmpnaenyorb - Working length 3300 mm - 4.5 kw - Blade diam. 330 mm - V. 380/50 - S/N 99T318 - Year 1999

Year of construction: 2021, condition: new, The prices mentioned in this advertisement are valid as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of steel as a raw material is limited and currently unpredictable. Therefore, we kindly ask you to inquire about the current prices and availability! We will be happy to provide you with an up-to-date offer! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW -: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Price for transport within Germany (excluding islands): €425 (net)! Of course, you can also create longer or shorter rack units by omitting or adding more frames (or by using different bay widths); this example with 4 frames is just the most common rack solution! A cantilever rack system, hot-dip galvanized, consisting of: 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized Predpsddmr Nefx Anyob IPE 160 / 80 with 2x3 adjustable arms of 1.20 m, 500kg load capacity per arm with cross braces approx. 1.30 m Rack uprights, double-sided, approx. 4160mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable rack arms each Load capacity with load center at 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m! Special sizes (different bay widths) are also available upon request, but they will also incur an additional cost and have a longer delivery time as they need to be manufactured separately! If you do not specify any deviating bay widths, we will deliver the rack with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x1100x1720 mm Weight 2500 kg Total power requirement 19,5 kw Prjdpfx Asvz El Aonyeb

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Predewuz R Hopfx Anyeb Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Prodpfx Aneddmq Toyob Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. Prsdpfszuzp Tox Anysb 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 4.185 (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/100 each with 2 x 3 adjustable Arms 1.20 m, 860kg load capacity per arm with bandages approx. 1.30 m Pjdpfx Aeddmqyonyjrb Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 860 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Year of construction: 2017, condition: new, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW - : Price ex-works including loading! 1 racking unit with 4 uprights: €3,210.00 (net)! Transport within Germany (excluding islands): €550.00 (net) A cantilever racking system, hot-dip galvanized, consisting of: 4 racking uprights, double-sided, approximately 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable arms, 1.20 m, 750kg load capacity per arm with cross braces approximately 1.30 m Racking uprights, double-sided, approximately 3500mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Pjdpsddmtqjfx Anyjrb Load capacity with load center at 600 mm: 750 kg per arm / 2250kg per upright with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available in stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will apply to the stated price for lengths from 1.50m! Custom dimensions (different center distances) are also available on request, but will incur a surcharge and have a longer delivery time as they need to be manufactured specifically. If you do not specify any different center distance, we will supply the racking with a center distance of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approximately 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) are selectable! Please contact us!

Condition: new, weight of the machine ca. 392 kg Prsdpfx Aevwgfvsnyob

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 610 mm, number of blades: 4, extraction connection diameter: 150 mm, number of planer blades: 4, planing height: 190 mm, – German-made – For wet wood Pjdpfexykn Asx Anysrb TECHNICAL SPECIFICATIONS: – Planing width: 610 mm – Planing height: 190 mm – Motor power: 2 x 5.5 kW – 4-knife cutterheads – Four feed speeds: 6 / 9 / 12 / 18 m/min – Two upper toothed feed rollers – One upper smooth feed roller – Two support rollers in the table – Row of anti-kickback fingers – Extraction port diameter: 150 mm – Machine dimensions (L/W/H): 160 / 140 / 170 cm – Weight: 1500 kg