Used Draloric Resistance for sale (1,757)

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Gjdpeyn Uc Ijfx Almsbl Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,475 mm, A19 GW26P0201501 Refrigerated box trailer, manufacturer: Unsinn, model UKT 6°C 2513-13-14, dimensions: 2500x1350x1900 mm Refrigeration unit manufacturer: GOVI, model Arctik 1600N, serial no. 230317666A, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg Gsdpfxeyn Udro Almsbl Chassis: Unique, torsion-resistant aluminium frame for safe driving characteristics Axles, with braked version: AL-KO brake system Body: Thermo-sandwich construction * Inner and outer panel made of hot-dip galvanized and powder-coated steel sheet for robust use * Insulation: PU core * Rear double-wing door with aluminium hinges * Refrigerated compartment pressure lever lock and stainless steel door retainer * Rear frame and edging profiles made of special aluminium profiles, anodized for an attractive appearance * All-round three-sided impact protection Subject to errors and prior sale

Condition: new, Year of construction: 2026, pressing force: 180 t, DURENDUS 180 T Workshop Press – Single-column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here was built to customer specifications and has already been delivered. We can supply you with this machine from stock or manufacture a new one – gladly taking your individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Base price: €8,950 net Options (upon request): The listed options are based on successfully completed customer projects and allow targeted customization of the machine for specific applications. The basic machine offers a functional standard version – in practice, it is typically enhanced with additional equipment and customized for each project. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure setting - Lateral piston movement (900 mm) - Bending tool - Torsion-resistant cylinder with manual travel adjustment - V-profile straightening fixture in combination with table plate - LED lighting - Foot pedal - Cooling unit ===== Technical Data & Information: ==== General Information Design: Workshop press Press force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm ==== Working Area Clear width: 1,400 mm Open depth: 400 mm Mounting height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 8.1 mm/s Return speed: 11.8 mm/s ==== Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Manual lever operation Manual fine adjustment via lever Connection: 400 V / 50 Hz Total connected load: approx. 8 kW Gedpjy H A T Tefx Almsbl ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Two-layer RAL paint finish ===== Pressing, removing, assembly work, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are built according to German as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our core competence is in custom machine building and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. The hydraulic components used in our presses are predominantly from leading European manufacturers.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Gbedpsu Th S Ssfx Almel Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. Gedpfx Alox Dnb Uemobl • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Code: 0378 Brand: ORMAMACCHINE Model: NPC 6/90 E - Norme CE Hot press with electric platens for veneering, panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture, composite materials, plastics, and various - CE Standard Technical data: Platen dimensions 2500 x 1300 mm Gbedpsy I Tqrsfx Almel Total thrust 90 tons N° 6 cylinders Cylinder diameter 70 mm Stroke 400 mm Pressure 3 kg/cm² Motor 2 Hp Electric Platens: Max temperature up to 120° C, max working pressure 7 kg/cm². Platen made of a 12 mm aluminium plate which resistances are inserted in underneath a chipboard support with reinforcement tubes inside Perimeter emergency rope Double rack system Lateral guides on platens for a perfect movement further safety feature of the pressing platen Overall dimensions mm 3060 x 1650 x 1850 h Weight kg 3400

Condition: used, mileage: 97,400 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, F-MAX LUXURY LED lighting package, intarder, auxiliary air conditioning, auxiliary heating, TPMS, Alcoa alloy wheels, roof light package with chrome bar, Hornair chrome, full fairing, fully equipped, first owner, 3-year manufacturer's warranty, very well-maintained condition. Additional Technical Data ----Displacement 12,740 cc Emission Class Euro 6 Environmental Badge 4 (Green) Color: Black ----Interior Features* Adaptive Cruise Control * Auxiliary Air Conditioning * Climate Control (Air Conditioning) * Navigation System * Retarder/Intarder * Auxiliary Heating Safety & Environment* ABS * ESP * Particulate Filter Vehicle Description ----Vehicle Specifications * Engine: 500 hp * Emissions Standard Euro 6 * Transmission: 12-Speed Automatic ZF Traxon Axles and Wheels Wheelbase: 3,600 mm Front Axle * Wheel Size: 385/55R22.5 * Brakes: Disc Brakes * Suspension: Parabolic Leaf Spring * Load Capacity: 8,000 kg Rear Axle * Wheel Size: 315/70R22.5 * Brakes: Disc Brakes * Suspension: Air suspension with two air bellows * Load capacity: 11,500 kg * Fifth wheel height 1,100 mm Luxury Pack special equipment Exterior * Roof light package with chrome bracket * Chrome AIR horn * Electric cab tilt * LED low beams * Side skirts * Aluminum wheels * 1 x 600 l fuel tank * 2 x 450 l fuel tank * Fifth wheel height 1,100 mm * Fog lights * Sun visor on the cab * Roof spoiler * Side spoiler * Rain sensor * Automatic headlights Interior * 8-inch cluster display * Multimedia system with 7.2-inch touchscreen * Truck-specific navigation system * Refrigerator * Electric cab tilt * Auxiliary heating * Auxiliary air conditioning * Automatic climate control * Double armrest for passenger seat * 2nd bed + storage compartments Technical features * Cruise control * ADAPTIVE CRUISE CONTROL with ZF INTARDER * LDWS (Lane Departure Warning System) Gsdpfxoy Ifv Hj Almjbl * AEBS (Advanced Emergency Braking System) * EBS (Electronic Braking System) * ESP (Electronic Stabilization Program) * ASR (Anti-Slip Control) * ECO-Roll * Differential Lock * Adaptive Cruise Control * Max Cruise (Predictive Cruise Control) * TPMS (Tire Temperature and Pressure Monitoring System) * ADR & smart Tachograph * Truckconnect * Emergency Brake Assist HIGHLIGHTS & PACKAGES * ADPAB LUXURY PACK ENGINE, TRANSMISSION & CHASSIS * FD2AB Intarder LIGHTS & VISIBILITY * FT22050 LED Lights TECHNOLOGY & SAFETY * FT22067 Auxiliary Cooling System incl. 210 Ah AGM Battery * FT22042 Tire Pressure & Temperature Monitoring System (TPMS) Other Features * FT22069 CB Radio Antenna (antenna only) * FT_VA_BREIT Front 385/55 Rear 315/70 R22.5 * FT004 Warranty 3 (3 years from the date of purchase for the entire vehicle) * FTTANK Tank 600l R and 450l L * HORN AIR Horn Chrome * Roof Light Package with Chrome Bracket * FT22019 Saddle Height 2 Bellows Air Spring (Catalogue Height 1100mm) SAF 1.119, 1.147, C2AS, 315/70 R 22.5 Continental, 2.47, low rolling resistance Despite the greatest care, errors in the advertisement cannot be ruled out. We reserve the right to make errors and to resell the vehicle prior to purchase.

Condition: good (used), Year of construction: 2021, With patented MULTIFORCE end-lift system! The punching press automatically adjusts the cutting force to the size of the punching tool. It does not matter how resistant or thick the material to be cut is. Cutting table: 1,000 x 500 mm Arm reach: 370 mm Maximum cutting power: 25 t – 245 kN Dimensions: 1,000 x 1,140 x 1,710 mm Net weight (with oil): 1,020 kg Godpfey Inwyox Almsbl

Condition: refurbished (used), functionality: fully functional, pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 60 l, Equipment: type plate available, The Symex CML 500 is a high-performance vacuum homogenizer mixer designed for producing demanding products in the pharmaceutical and cosmetics industries. This system combines mixing, dispersing, homogenizing, heating, cooling, and vacuum processing in a closed unit, enabling precise and reproducible production—from pilot scale to industrial applications. Such systems are specifically engineered for complex processes with stringent quality requirements. Technical Highlights of the Symex CML 500: Tank - Usable volume: approx. 500 liters - Total volume: approx. 780 liters - Minimum volume: approx. 125–160 liters - Product space pressure range: -1 / +2 bar - Product temperature: up to approx. 133 °C - Heating jacket: up to +4 bar / 151 °C - Design in accordance with AD 2000 - The tank is fully pressure and vacuum-resistant, ensuring safe operations under demanding conditions. Agitator - Anchor agitator with flow breakers - Speed range: approx. 11–66 rpm - Power: approx. 7.5 kW - Frequency-controlled - Designed for highly viscous products - The agitator provides uniform mixing and optimal heat transfer. Homogenizer - Power: approx. 16–20 kW - Speed: up to approx. 3,000 rpm - High shear performance for fine dispersion - Rotor/stator system - The homogenizer ensures stable emulsions and reproducible product quality. Vacuum System - Operation under vacuum possible - Liquid ring vacuum pump (external) - Pressure and vacuum monitoring - Vacuum operation significantly reduces air entrainment and improves product quality. Heating & Cooling - Double-walled vessel (2-zone heating) - Precise temperature control - Even heat distribution - CIP system Multiple CIP Connections - Rotating spray heads (360°) - Cleaning of the entire process chamber, including pipelines Material Feed - Direct suction of liquids and powders - Feed into the homogenizer area - Fast and low-loss processing - These integrated feeding and circulation systems enable highly efficient process management. Additional Equipment - Hydraulic lid lifting device - Multi-nozzle with several connection options - Sight glass with double wiper - Vessel lighting - Dosing vessel (approx. 8 liters) - Sampling valve - Membrane and disc valves - Circulation piping for homogenization and CIP Control & Operation The system features a modern operation concept: - Touch panel control - Adjustable speed and cycle times - Process monitoring (pressure, temperature, speed) - Automatic and manual operating modes - Alarm and safety functions Gbedoy Hq I Sspfx Almjl Advantages of the Symex CML 500 - Combination of all process steps in one unit - High process reliability through enclosed design - Reproducible and stable product quality - Suitable for highly viscous and sensitive products - Hygienic design (GMP-compliant) - Flexible application for different batch sizes Delivery & Handling - Delivery ex works - Turn-key project available (incl. commissioning) - International shipping possible

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment Gedpfx Aley Ib Aismsbl • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm • C axis: pneumatic 0–90°, 30 Nm • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!

Condition: new, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Wide trailer with support wheel and lattice walls Garden Trailer 230 KIPP A wide trailer with jockey wheel from the KIPP Garden Trailer 230 series, dimensions 230 x 125 cm. The KIPP Garden Trailer 230 model is 19 cm wider than the KIPP Garden Trailer 200 model. The set includes: a support wheel, lattice sides and a flat gray tarpaulin. Sturdy support wheel from renowned German manufacturers. Galvanized steel grid sides, resistant to rust. With a flat gray tarpaulin, they create an excellent transport surface for transporting goods that require a dry and wide space during transport. An additional advantage of a wide trailer with a support wheel is the possibility of tilting it and folding the drawbar, which allows us to park the trailer vertically on the back and quickly unload loose goods. Gjdpet Id Tbefx Almjbl If you decide to purchase our new trailer, you will receive a 2-year warranty, thanks to which you can use it without fear of damage. We provide each product with a user manual and a warranty booklet. All important documents are delivered to you together with the purchased trailer. In addition, you can purchase additional equipment such as BIS side panels, tarpaulins with the H-800 frame or an anti-theft device and an aluminum cover at any time. If you have any questions or doubts while using the trailer, you can contact our specialists at any time. They will be happy to provide all the information and explain everything. In addition, our wide trailer with support wheel and lattice drop sides can be tilted thanks to an inclinable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or drop. This solution is also most commonly found in significantly more expensive caravans, which significantly improves the user experience. Another advantage of this solution is the ability to store the trailer in a vertical position with the drawbar folded in at the rear. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting in because of the protruding drawbar. You can even place it based on the front of the building or wherever you want!

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA Manufacturer: TMCI Padovan Year of Manufacture: 1994 Quantity: 2 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 150 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm Gbedpfxey Hknxe Almjl

Condition: new, functionality: fully functional, We offer a high-quality BOPP flat film (BOPPFF30040-1000) for industrial further processing. Technical Specifications: Material: BOPP flat film (PC100) Width: 300 mm Thickness: 0.040 mm Length: 1,000 linear meters Core: 76 mm Properties: Transparent, stable, and tear-resistant polypropylene film Ideal for packaging, lamination, and labelling applications High resistance to temperature and humidity Availability: Immediately available from stock. Gbedpfjyw Ib Rex Almsl 15% discount when purchasing 1 pallet with 60 rolls.

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. Gsdpfx Aoin Eztjlmebl AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 1020 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Gbodpfx Alsin Ezdjmol CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Gsdpfx Asiknp Rolmobl Tool diameter max. lowerable 180 mm

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Hidrostal C03R-RMN3R | Submersible Pump Manufacturer: Hidrostal Model: C03R-RMN3R+CEZY4-GSEQ1AF+NZ1Z10A-10 Year of manufacture: 2024 Rated power (P2): 1.50 kW Rotation speed: 1375 rpm Power supply: 400 V / 4.7 A (50 Hz) Protection class: IP68 (fully watertight under immersion) Insulation class: F Device weight: 92 kg Maximum ambient temperature: 40°C Serial number (M.NR.): 311952 Gjdpfey I Dtdex Almobl Equipment Features: Transport handle: Made of acid-resistant stainless steel 1.4404 (V4A). Handle load capacity (WLL): 150 kg. Professional submersible pump by the Swiss brand Hidrostal, designed for operation in the most demanding conditions. Thanks to its IP68 protection rating, the unit is suitable for continuous immersion in medium. Pumps from this manufacturer are distinguished by a unique screw-centrifugal impeller, which efficiently handles the pumping of sewage, sludge, as well as liquids with a high content of solids and fibrous materials without the risk of clogging. Its robust construction, weighing 92 kg, and the use of high-quality stainless steel for load-bearing components ensure longevity and safe operation even in aggressive chemical environments.

Condition: new, Year of construction: 2026, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Gbedpoin Uilsfx Almjl SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 1012 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 1200 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Gbedpfsin Ewzex Almsl Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Godpfx Ajin Eqfslmjbl

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressure: 3 bar, total width: 750 mm, total length: 2,500 mm, total height: 1,500 mm, overall weight: 120 kg, empty load weight: 75 kg, type of input current: three-phase, 3 Alfa Laval LKH-25 Sets | 7.5 kW Pump + E+H (Promag) Flowmeter + Strainer We offer for sale three (3) professional processing units manufactured in 2020. Each set consists of a high-quality centrifugal pump and a precise measuring and filtration system, mounted on an acid-resistant stainless steel pipeline. Gsdpfxey Nkcze Almsbl Set Specifications: Alfa Laval LKH-25 Centrifugal Pump: - Motor power: 7.5 kW - Capacity: 35.0 m³/h (at 3.0 bar pressure) - Construction: Hygienic stainless steel housing - Mounting: The pump is fitted with its own adjustable support legs for stable, free-standing floor installation and easy leveling. Measuring Equipment (Endress+Hauser): - Each set is equipped with an integrated electromagnetic flowmeter (models Promag P, F, or 300) installed on the pipeline. These are high-precision devices with LCD displays, suitable for operation at temperatures up to 150°C. Filtration and Fittings: - Mesh strainer: Installed on the acid-resistant stainless steel pipeline (visible in the measuring set pictures) - Standard: Hygienic, acid-resistant, fully CIP-compatible Condition and Dimensions: - Year of manufacture: 2020 - Pump weight: approx. 73 kg - Technical condition: Very good, the units have been operated in a clean production environment and regularly serviced. Application: Ideal for the food, brewing, and chemical industries where hygienic transfer of media with simultaneous precise liquid quantity measurement is required.

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Shaft diameter ø 120 mm Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Godpfsummkaox Almsbl Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Condition: new, Maximum grinding length 3200 mm Gedpfoy Hgw Aex Almebl Work area (length*width) 3180*180 mm Grinding wheel size 200*100*32 mm (can be customized) Rail: Machine guide rail with wear-resistant strip Cooling system: Water tank with integrated water pump for spray circulation cooling Grinding precision ≤0.05 mm/m Operating voltage: 380V 50Hz Machine spindle reciprocating speed: approx. 17 m/min Grinding head drive type: Belt drive Grinding head motor power (custom grinding machine motor): 4.0 kW Traverse motor power: 0.75 kW Water pump power: 0.125 kW Total power: approx. 5.5 kW Total weight: approx. 2800 kg Overall dimensions: 5350*1300*1300 mm CE certified

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023 Equipment and technical data: - Machine frame: robust, torsion-resistant steel construction - Membrane frame: opening/closing with gas pressure cylinders - Swivel castors: removable, 360° rotatable - Vacuum pressing pressure: 0.85 kg/cm² (8.5 t/m²) - Vacuum table: 3.68 m²; 31.28 t Gbodpfx Asyf R Alslmel - Membrane: natural rubber 3100 x 1500 mm - Usable area: 2920 x 1320 mm - Material thickness: 2 mm - Colour: grey - Material hardness: 53 Shore A - Tear strength: 26 MPa - Elongation at break: 690% - Temperature resistance: up to +130°C - Pressing area: 2920 x 1320 mm - Power requirement: 1.25 kW Options: - Membrane quick-change system - 200 l tank with digital pressure control, operating modes: automatic and manual - Additional vacuum outlet for further applications: vacuum bag, vacuum clamps - Becker pump 40 m³/h Dimensions: 3200 x 1400 x 1000 mm Availability: short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2026, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide Gedpfjfhv Tcjx Almsbl