Used Eberlei Für Werbeschilder for sale (14,775)

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  - Capacity: max. 1,500 bph (1,000 bph were actually run)  - Bottled product: Beer   - Included formats: 0.33l longneck, 0.5l NRW  - Closure: Crown cap  Iijdpjxgfr Nefx Aphoh Scope of delivery  - Bottle washer | SEN | 1989 (overhauled and installed in 2020)  - Isobaric filler block | Shandong Yuesheng | 2019   - Rinsing positions: 14   - Filling positions: 12   - Capping positions: 5   - With pre-evacuation   - Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  - Dry tunnel | Shandong Yuesheng | 2019  - Labeler incl. laser printer   - Collecting table  

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Iiodpfxsxlkg Ao Aphjh On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Power take-off gearbox, hydraulic pump gearbox, gearbox, spur gear gearbox, reduction gearbox, reversing gearbox -PTO gearbox: Hydraulic pump gearbox with incoming profile shaft -PTO shaft input: 1-3/8" 6 teeth -Output splined shaft: 35x31 Z-18 -Wave spacing: 204 mm -Bolt circle: Ø 155 mm / M12 -Translation: i = 1:1 -Dimensions: 350/205/H220 mm Isdsvum Sdopfx Aphoih -Weight: 13.2 kg

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: Iijdpfxswh U Avs Apheh - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: good (used), Included in delivery: 1x post protector, used Manufacturer: Nedcon Material color: blue Total height: approx. 900 mm Post protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Iodpfx Apsv N Twvshoih Material thickness: approx. 4.00 mm Leg dimensions: approx. 65 x 65 mm Deflector height: approx. 50 mm Hole spacing: approx. 60 mm Hole diameter: approx. 11 mm Suitable for frame profile width: 100 mm Including mounting hardware Consisting of: 4x hexagon screws M 10 x 35 mm 4x hexagon nuts M10 8x washer M10 Your contact person: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional shipping or transport of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Bezel, steady rest, lynette -Steady: for crankshaft grinding machine -Dimensions: see photos -Dimensions: 420/110/H270 mm -Weight: 20.8 kg Ijdpev Rmt Tjfx Aphoih

Condition: good (used), Bezel, setting stick, lynette -Bench: for crankshaft grinding machine -Peak height: 170 mm -Dimensions: see photos -Dimensions: 205/115/H220 mm Iedowv Na Sspfx Aphsih -Weight: 11.1 kg

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  - Capacity: Max 6,000 b/h - Formats: - 0.210L, - 0.355L, - 0.500L glass bottles - 26mm metal crown caps - Dimensions: - Width: 5,300 mm - Depth: 2,630 mm - Height: 2,860 mm - Weight: 8,000 kg - POWER SUPPLY: - Main: 460V – 60Hz – 3F+N+T - Auxiliary: 24V DC - Machine main motor: 4 kW Iisdpfx Apovm U Dlohsh - Installed power: 9 kW Scope of Delivery  - Triblock (rinser, filler, and capper) - Selfadhesive Labeller with 2 stations - Conveyors

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic Ijdpfx Asvptt Rephoih - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: ready for operation (used), KUKA Rotor with Binder 86 61109H31 Brake for 1FK6081-6AF71-1ZZ9-Z Motor SN: P46100/T0,used, good condition, 100% working, scope of delivery as per photos Isdju Uxabjpfx Aphoih

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Ijdpfewczfajx Aphjih

Condition: used, Year of construction: 2009, Overview  This model 4300 DE-ST9 sleeve labeling machine was manufactured by FUJI SEAL EUROPE B.V. in 2009. Photos and an operational video are available, as well as the general layout of the line. Technical details  Manufacturer: FUJI SEAL EUROPE B.V. Model: 4300 DE-ST9 Year of manufacture: 2009 Last format: 0.25 liter  Ijdpfxju Rwdys Aphsih

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Ijdpeuud Irsfx Aphsih Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: like new (used), End boards for bar former Iiedpfx Apox Il Hxohoh

Condition: ready for operation (used), Wittenstein stator for TPM 050-004I-600K-OW0-075UL274 motor SN: 1599476, used, in good condition, 100% functional, scope of delivery as per photos. Isdpfx Ajx Dwkfephjih

Condition: ready for operation (used), Mitsubishi BKO-R8612 power board for Mitsubishi SX10 wire EDM machine, used, normal signs of wear, 100% functional, delivery as per photos. Iiedpsx Dw I Rsfx Apheh

Condition: like new (used), functionality: fully functional, mileage: 108,000 km, first registration: 03/2022, maximum load weight: 962 kg, next inspection (TÜV): 03/2026, fuel: diesel, color: white, number of seats: 3, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, fog lights, onboard computer, rear view camera, start-stop system, traction control, FIAT DUCATO VAN 30 CH1 - 2.2 MJET3 120 HP - EURO 6D COMPANY VEHICLE – ONE OWNER – FULL SERVICE HISTORY PAYLOAD: 962 KG AIR CONDITIONING TOUCH SCREEN RADIO BLUETOOTH REAR VIEW CAMERA MULTIFUNCTION STEERING WHEEL VAT EXPOSED €14,900.00 + 22% VAT = €18,178.00 VAT INCLUDED 24-MONTH WARRANTY TAILORED FINANCING AVAILABLE ALSO WITHOUT DOWN PAYMENT, WITH FLEXIBLE INSTALLMENTS AND FINAL BALLOON PAYMENT TRADE-INS AND VEHICLE SCRAPPAGE POSSIBLE Iiodpfsykk D Tex Aphoh MILEAGE CERTIFIED ON BOTH CONTRACT AND INVOICE. Although we strive to accurately describe all vehicle features, discrepancies in listed equipment and/or photos may occur. We invite you to verify all details with one of our consultants, who are at your disposal for any additional information.

Condition: new, Year of construction: 2026, Mobile Workshop and Accommodation Container For sale is a brand-new mobile container in striking red, perfectly suited as a workshop, storage, or break room on construction sites. Iedpfx Apew Itl Iehoih We are happy to provide further information upon request.

Condition: ready for operation (used), KUKA rotor with binder 86 61104H23 brake for 1FK7034-5AZ91-1ZZ9-Z S09 motor, the screw in the thread of the rotor is torn off, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Iedpfeu Tm E Nox Aphsih

Condition: used, Altarfalztasche MBO 76 Online-Video-Inspection by Skype-Video Iiodeh Ax I Sepfx Aphjh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Fensterfalztasche - Altarfalztasche - Gateway Buckle Stahl für K/T 94erwith deflector with control box Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Iodpeh Ax Rmjfx Aphsih Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: like new (used), We are offering a second-choice deep support beam from the manufacturer SSI Schäfer for sale. This deep support beam is suitable for a frame depth of 1,250 mm and a crossbeam width of max. 55 mm. The scope of delivery includes: 01x deep support beam, used Manufacturer: SSI Schäfer Material color: RAL 5010 blue Overall length: approx. 1,264 mm Isdpfx Apsh Et Aqjheih For frame depth: approx. 1,250 mm Crossbeam support: approx. 63 mm Clear span: approx. 1,130 mm Profile dimensions: U-profile 50x50x3 mm Weight: 4.58 kg | per piece General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), 4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S Iiodpfx Aoh Eu Trsphjh

Condition: new, Pressure gauge, pump monitoring device for ABEL pumps, NEW. We need the pump type / series and the machine number from you. Most spare parts available from stock. Your reliable service partner and spare parts supplier for ABEL pumps. Isdpfx Apeiyp R Hshoih

Year of construction: 1940, condition: used, Automatic universal gear hobbing machine for manufacturing spur gears and helical gears. Largest milling diameter: 120 mm Smallest milling diameter: 5 mm Smallest tooth pitch: Module 0.30 Largest tooth pitch: 2 mm Largest milling length: 100 mm Complete with all accessories. Iiedpfx Ajkw T Rmopheh