Used Ebm-Papst Edge Banders Ebm Kdp 117 Slk-P 2007 for sale (44,638)

Condition: used, Year of construction: 2014, machine/vehicle number: 3237006, Manufacturer: Formcook Model: PRoGRILL 1175 TFEF Year: 2014 Condition: Used Serial Number: 3237006 Stock Number: 3066 Belt width: 1100 mm Cooking length: 10000 mm Heating: thermal oil, 189kW + electric, 128kW Lrsdpfx Aoy Ib Tbemtsp Exhaust: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Water: 15,4 l/min for belt washer Power: 3 x 400V, 50Hz, 168kW Dimensions: 10000 x 2200 x 2450 mm

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Lrodpfxjyqdmzo Amtjp Vehicle not prepared Errors and prior sale excepted.

Condition: good (used), Perfecta SL-10 P Paper Stack Lift with Sidewall The device is in perfect technical and visual condition. Virtually unused. Equipped with an adjustable sidewall for easy stacking. Designer look. Lifting capacity: 1000 kg Plate size: 900 x 1300 mm Power supply: 380 V Lrjdpfjzlag Sox Amtjp Weight: 650 kg The lift is very easy to move, mounted on wheels. The control panel is adjustable to the right and left. Lifting is operated by a photocell. Quiet hydraulic unit.

Condition: ready for operation (used), Main drive unit of a Jensen Senking P72 SEW Eurodrive Lsdpfx Ajy Ukq Aemtjrp K127 UV2001.4

Condition: good (used), Three-phase motor, electric motor Lrjdpsdlw D Usfx Amtsp -Power: 2.2 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP 44 -Dimensions: 380/236/H270 mm -Weight: 38 kg

Condition: good (used), End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg Lrodpfogfcm Rex Amtsp

Condition: good (used), Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: P&D, drip tray -Drip tray: Type Ljdpsw H Nwfofx Amtjrp -Collection volume: 180 liters -Load capacity: 800 kg -Grating: galvanized -Dimensions: 1210/1240/H285 mm -Weight: 493 kg

Condition: good (used), Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Schroff / Papst, fan assembly type 60700-018 with 3 axial fans -Axial fan: Papst Type 4850 N -Voltage: 220 V / 9 W -Dimensions: 480/180/H40 mm -Weight: 2.7 kg Lsdpfxsuqf Hbj Amtsrp

Condition: used, Three-phase motor, electric motor -Power: 4 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 Ljdpfx Amjdwlqdotorp -Dimensions: 395/300/H225 mm -Weight: 41 kg

Condition: used, Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 490/325/H270 mm -Weight: 71 kg Lredocncriepfx Amtjp

Condition: used, Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm Lodpfx Aecqudkemtjrp -Construction: B3 -Protection class: IP 55 -Dimensions: 445/340/H260 mm -Weight: 55 kg

Condition: used, Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS Lrjdpeb S Hufsfx Amtjp -Stations: 10 -Price: per station -Weight: 0.4 kg/piece

Condition: used, mileage: 111,700 km, power: 120 kW (163.15 HP), first registration: 01/2010, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro5, number of seats: 6, loading space length: 3,600 mm, Equipment: ABS, central locking, Sprinter 516 CDI Double cab, 6 seats ONLY 111,700 KM – ORIGINAL! Belgian registration Good condition Price: €10,990 net Lsdpfxezhhlzo Amtorp

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M6 Endermolab 1I or optional 2I Beauty and therapy device Body and facial device (new) Endermo lift (Ergo lift) Newest world patent for the face Tested by training instructors (beauty and therapy) Completely refurbished and revised Fresh maintenance performed New hose Reconditioned roller head KM80 from 2013 New roller head KM70 or therapy head TR50 New roller head KM50 New controller from the previous owner Device has been freshly refurbished New valves, new seals, new hose New capacitors, new filters, etc. New price: 39,980 Euros net Suitable for Endermologie body and Endermologie face Optional upgrade to Ergo lift patent 2014, plus 2,000 Euros Lipo massage and Endermolift technology can be performed Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual specifications Optional starter kit (bodywear, filters, caps, flyers) A high-quality device in the upper class of the medical beauty league! Not junk like ultrasound or radio frequency from China. Ergodrive, Ergo lift 12 months warranty from the date of purchase, valid only in conjunction with a 2-day training course and final exam Start your Endermology season now. A 100% natural mechanostimulation ensures a painless but intensive treatment. The treatment is highly addictive. Customers come with the goal of strengthening and firming connective tissue, reducing cellulite, and men wanting to tighten their stomachs. My customers typically lose 2 clothing sizes and, scientifically proven, it promotes metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This procedure is patented and has the quality of a Swiss watch movement. I have been treating and trading with older LPG used devices for 18 years, and the results of the latest generation have prompted me to support the new Integral and sister model Endermolab as well as the Alliance. We will also support you with user questions after the purchase. Facts about LPG 40 years of experience World market leader in the medical beauty segment European company 175 verifiable clinical and scientific studies 80,000 devices produced Ljdpfxscgy Hdo Amterp Presence in 100 countries 12 million treatments performed 200,000 treatments per day Leasing possible through our in-house bank, e.g. 399 Euros per month. Pictures are similar, we constantly have new devices on offer YOU are important to us even after the purchase! Nationwide references available Doctors, therapists, cosmetologists, etc.

Condition: used, Year of construction: 2013, Edge Profile Grinder With Fanuc robot Teach pendant and controller Ledpfszpammjx Amtjrp Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Ljdpsxcal Ajfx Amterp

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Lrodpfjk Unitox Amtop Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED Lrsdpfx Aji Riytemtep work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. Ljdpozcf Dljfx Amtorp The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: excellent (used), Socket outlets, flush-mounted boxes, touch-protected boxes, Schuko sockets, explosion-proof wall sockets, power connectors -Manufacturer: CEAG, Power connector EX plug 16A 3-pole unused original packaging Lrjdpfx Asyilx Hsmtop -Type: GHG5117306R0001 -Number: 1x power outlet available -Cardboard dimensions: 200/95/H100 mm -Weight: 0.3 kg

Condition: new, functionality: fully functional, Year of construction: 2026, ///TECHNICAL PARAMETERS //Crusher Crusher Opening (L*W)(mm): 1100 x 750 mm Max. Feed Grain Size (mm): 650 mm Width of Discharging Port (Adjustment Range) (mm): 70-200 mm Motor Power (kW): 110/132 kW(High Performance) Capacity (T/H): 150-400 t/h Feeding System Lrodoyni Ulepfx Amtop HopperVolume (m3): 7 m3 //Whole Machine Total Weight (T): 52 t Transport Size (mm): 15.000 x 3.000 x 3.700 mm Total Working Power (kW): 162.5 kW Motor Power (kW): 112 kW

Condition: like new (used), Year of construction: 1999, functionality: fully functional, operating hours: 24 h, total width: 1,000 mm, total height: 2,500 mm, overall weight: 1,200 kg, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion Lredpfx Asurb R Eomtsp

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,925 h, load capacity: 8,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,550 mm, drive type: Elektro, Multi-directional forklift Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Lsdpfxjx Ef N Es Amterp Battery year: 2023 Fork positioner, heater, full cab,

Condition: used, Year of construction: 2019, operating hours: 2,971 h, machine/vehicle number: 4KF3743, fuel type: diesel, motor manufacturer: Kubota Z482 E4BG2-EUP-1, General information Field of application: Construction Weights Empty weight: 393 kg Functional Generator capacity: 2,5 kVA Dimensions of cargo space: 123 x 64 x 68 cm Other information Fuel consumption: 0.7 Liter/Hour at 75% Load Generator: Sincro SK160SA1 Frequency: 50 Voltage: 230 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 120 l Production country: BE Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Single phase generator Multiple units in stock Lrodpfx Amezcuf Sstop Stage V generator StV

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. Lrjdpfx Amofn N U Hstsp The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.