Used Eckert Cutting Technology Gmbh Laser Cutting Machine for sale (114,575)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, Submitting a bid obligates you to collect the item by September 21, 2026! TECHNICAL DETAILS Sheet size: max. 3,048 x 1,524 mm Z-axis stroke: 70 mm Sheet thickness steel: 20 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminum: 12 mm Positional deviation Pa: ± 0.1 mm/m Positional scatter Ps: ± 0.05 mm Table load capacity: 750 kg Table changeover time: approx. 35 s Ndsdpfx Agjzwmn Tsrjb Positioning speed X/Y axis parallel: max. 100 m/min Positioning speed X/Y axis simultaneous: max. 140 m/min Axis acceleration X/Y: max. 12 m/s² Cutting speed: max. 50 m/min MACHINE DETAILS Beam source: ByLaser 4400 Laser type: CO₂ laser Laser power: max. 4,400 W Wavelength: 10,600 nm Machine weight: 12,000 kg Laser weight: 1,700 kg EQUIPMENT 2 cutting heads with 5-inch and 7.5-inch lenses

Year of construction: 2021, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM Nsdpszxu Nnsfx Agrsdb MIN CIRCULAR SECTION: 20 mm MAX CIRCULAR SECTION: 152,4 mm MAX SQUARE SECTION: 152,4 X 152,4 mm SOURCE: IPG fibra 3000W ; 3000 W CONTROL UNIT: CUTLITE PENTA Z32 ACCESSORIES: FUME EXHAUSTER ; ETHERNET PORT ; USB PORT NOTE: AUTOMATIC BAR LOADING 6500mm; BAR UNLOADING UP TO 6000 mm; TUBE UNLOADING CUTTED ON THE BELT - MAX LENGHT 5000mm; CAPACITIVE SENSOR; No 2 INNER MONITORING WEBCAMS; ADDITIONAL X AXIS FOR HIGH-SPEED DRILLING; ALMA SOFTWARE

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, laser power: 8,000 W, CNC laser cutting system TruLaser 5030 Fiber (L68) 8000 Watt with LiftMaster X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 8000 Watt Standard equipment: Machine - Enclosed machine frame - Power supply for TruDisk integrated into the machine - Torque drive in combination with linear direct drives - Enclosed beam guidance via laser light cable (LLC) - Machine cooling unit (water-air) - Integrated control cabinets - Integrated cabinet - Automatic pallet changer in longitudinal direction - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 4001 with one LLC outlet - LLC according to standard layout (cable directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005). Cutting head - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Online condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Ndedozv Trvopfx Agrsb Control system - SINUMERIK 840D SL control system - Simple workshop programming - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - Microweld - AdjustLine - Multi-sheet processing - Condition Guide - Extended machine sensor system for Condition Guide - 19" touch color screen Data transfer - USB interface - RJ-45 network connection - Central Link - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust extraction system - Machine cladding, certified viewing window, door on the right - Electric roll-up roof + Solid-state laser TruDisk 8001 with 1 LLC outlet - BrightLine fiber - High-speed cutting package - Smart Beam Control (intelligent beam monitoring) - Performance package for fusion cutting + Smart Nozzle Automation - Nozzle changer - Automatic nozzle inspection + High-speed cutting package Eco + Integrated camera 1 for process monitoring (view of the first 2.5m) + CoolLine + Copper cutting package (includes cutting data) + Brass cutting package (includes cutting data) Automation + Basic LiftMaster unit - incl. stainless steel grid (tine spacing 67mm, interchangeable tines), suction frame, stripping device, double sheet detection, symmetrical arrangement) + Loading station - for stack height up to 200mm + Separation of thin sheet metal - Available for sheet thicknesses s = 0.8-2.0mm + Unloading platform + Loading platform + Right-hand arrangement

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for Njdpfx Asktffzsgrsdb un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW, including loading on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine Ndedpfx Aezv Sa Esgreb - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination Nodezlpb Sspfx Agrjdb - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine, only 4,300 cutting hours. Ndedpoivg Hgsfx Agreb This Prima Industrie Platino 1530 4.0kW CO2 laser cutting machine was manufactured in Italy in 2011 and installed at the end of 2011. Equipped with a PRIMACH 20 L control unit.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,500 h, machine/vehicle number: 1703226006, control type: CNC control, degree of automation: manual, actuation type: pneumatic, laser type: fiber laser, laser power: 500 W, table length: 800 mm, table width: 1,100 mm, working length: 600 mm, working width: 1,000 mm, Equipment: dust extraction, emergency stop, fume extraction, DEN / Bystronic FCCB 1012 – 500 W Fiber Laser Machine Njdpeyg E Ilofx Agrodb For sale is a DEN / Bystronic FCCB 1012 fiber laser machine with 500 W power. The machine is ideal for precise cutting and processing tasks in metalworking. Scope of delivery includes: Laser machine DEN / Bystronic FCCB 1012 (500 W Fiber) suitable extraction system all associated parts and components Original purchase price was 110,000 euros

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Nedpfx Agozlr Rpjrjdb Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: excellent (used), functionality: limited functionality, Year of construction: 2016, The laser is sold without a laser source, as a source of spare parts. All components are in very good condition. Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical parameters: Laser type: Fiber laser Working area: 3000 mm × 1500 mm Additional equipment: Donaldson Torit DCE DFPro-4SPK – Extraction and filtration system for laser fumes Infeed/outfeed table – automatic loading and unloading table Ndsdpfxjyhppvs Agrjb Light curtain – light protection system

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Nodpfxoyuvcij Agrsdb Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Nsdpfx Agszu Avzeredb Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 Workpiece dimensions6000 x 2000 mm Type of LaserFanuc Power4000 Watt ControlFanuc Longitudinal travel X-axis6100 mm Ndsdpfx Agjvkkkporjb Cross travel Y-axis2020 mm Hight travel Z-axis280 mm Travel speed84 m/min Max cuttingthickness in steel20 mm Max cuttingthickness in Inox15 mm Motor Power95 kW Length16 500 mm Depth5300 mm Hight2050 mm Weight26 000 kg Shuttle tableyes MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE IS STILL RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL

Condition: new, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 12001 G, laser hours: 1 h, laser power: 12 W, laser wavelength: 1,080 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 14 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, overall weight: 8,000 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, JFY BFC+ 12 kW Fiber Laser with TRUMPF Laser Source – a new sheet metal cutting machine We offer the modern JFY BFC+ 3015 12 kW fiber laser, equipped with a high-quality TRUMPF laser source. The machine is designed for precise, fast, and efficient sheet metal cutting in manufacturing and service facilities. The JFY BFC+ 12 kW is an excellent solution for companies involved in sheet metal processing, the production of steel structures, machine components, housings, industrial components, and ventilation elements. The 12 kW power ensures high cutting performance and broad capabilities for processing various materials. The machine combines JFY's robust construction, a stable cutting process, and TRUMPF laser technology. Thanks to the TRUMPF source, the user benefits from high beam quality, excellent process repeatability, and reliability in daily production. Key advantages of the machine: * Laser source power: 12 kW, * TRUMPF laser source, * Fiber laser technology, * High cutting speed, * Stable edge quality, * Precise cutting head with autofocus, * Robust machine construction, * Intuitive operation, * Quick production setup, * Ability to cut various materials, * High part repeatability, * Excellent value for money, * Technical and service support in Poland. Applications: * Cutting of carbon steel, * Cutting of stainless steel, * Cutting of aluminum, * Cutting of structural elements, * Production of housings and machine components, Ndedpfjhyml Asx Agrjb * Production of ventilation elements, * Serial and single-item production, * Laser cutting services. Commercial information: The machine is available from ANFAN Sp. z o.o. – the official representative of JFY International in Poland. We can prepare a customized machine configuration based on the customer's needs, including the working table size, loading and unloading system, and additional equipment. Please contact us for a detailed offer, technical specifications, and delivery terms.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Ndodpfx Aev Hxbbogrob

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Nedpfeg Ev T Ejx Agrsdb Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Ndodpfx Aswqqwbjgrob

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Nodpfx Aexxa Ucegredb

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Ndjdsy Rtf Uepfx Agrsb

Year of construction: 2015, condition: ready for operation (used), A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible. Njdpjy D Trnefx Agredb

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Njdpfswbuzfsx Agrjdb

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Ndedpfoxaph Usx Agrjb

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Ndodpfxsv Ip R Ae Agrjb

Condition: ready for operation (used), Year of construction: 2008, Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg. Ndodpfxettv T Ss Agrob

Year of construction: 1999, condition: ready for operation (used), Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible. Nodpfx Agswty Eaerjdb