Used Edge Sander Holzprofi Ksm2600 Special Accessories for sale (32,954)

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles Lredpfxezmkxho Am Uop 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Lsdpfxoznu Dwo Am Ujrp Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Feed speed 8 m/min. Lsdpfx Ajzmy N Nom Ujrp Weight 900 kg

Condition: used, Year of construction: 2018, total width: 1,800 mm, total height: 2,200 mm, total length: 1,900 mm, Colour: Grey Empty weight: 1.500 kg Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - └ Unit 1: - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 150 - - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 Lredpfxsyz U Dme Am Uep - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1900mm x 1800mm x 2200mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, mileage: 15,300 km, power: 735.5 kW (1,000.00 HP), first registration: 11/1998, fuel type: diesel, overall weight: 44,000 kg, axle configuration: 8x8, color: red, driver cabin: day cab, gearing type: automatic, Year of construction: 1998, Equipment: all wheel drive, car registration, Airport fire truck, body Ziegler - Z 8, maximum speed 120 km/h - 0 to 100 in 25 s. Water/foam roof monitor, powder front monitor. 11,000-liter water tank - 1,100-liter foam tank. Ziegler pump - MAN pump engine - 311 HP. Special signals. Rapid intervention. Overall length: 12.20 m, height: 3.50 m, width: 2.95 m. Well-maintained - ready for use. Lredpfxoxa Ezws Am Uop

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Available Immediately MAN TGS 35.510 – EURO 6, TipMatic – Automatic Transmission 8x2 Three steered axles Steerable/lift axle Front stabilizer approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Entry steps Checker plate floor Removable drop sides 9 x LED lights Retractable over-width markers extendable to 3500 mm wide Start/Stop Warning beacons 8 x stake pockets Ledpfxjwuhxwo Am Ujrp 6 x lashing eyes, 6500 daN Toolboxes Trailer coupling (AHK) Storage compartments Storage boxes 20-foot container locking system Perforated side profile with lashing eyes, 2500 daN Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point stabilizers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, wire rope winch, cross remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory set for winch operation, foldable roller, quick coupling between main boom and fly jib, and more…

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Ledjx A Nntepfx Am Uerp Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: good (used), Year of construction: 1985, Edge sander for solid wood with a star-shaped sanding pad for rounding edges Ledpfx Aeir Ukuem Usrp with oscillation

Condition: used, mileage: 303,000 km, power: 205 kW (278.72 HP), first registration: 11/2018, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 6,210 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 51 m³, loading space length: 8,527 mm, loading space width: 2,485 mm, loading space height: 2,418 mm, Equipment: ABS, air conditioning, cruise control, low noise, tail-lift, traction control, Permissible total weight: 19,000 kg, Cargo area (L x W x H): 8,527 mm x 2,485 mm x 2,418 mm, Cargo volume: 51 m³, Fabric seats, Air/leaf suspension, Tail lift, Digital tachograph, Low noise: CEE 92/97, Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Comfort driver seat, Air-suspended driver seat, 2-passenger bench, Radio/CD, Multifunction display, Bluetooth mobile phone prep, Lane keeping assist, Multifunction steering wheel, Electric windows, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote, Front underrun protection bar, Twin rear wheels, Spare wheel, Hill start assist, LED daytime running lights, Speed limiter, Voltage converter, Emergency brake assist, Anti-spray equipment, DROPSIDE BODY WITH SLIDING CURTAINS AND RETRACTABLE DHOLLANDIA 1,500KG TAIL LIFT, AIR CONDITIONING. Lodey Hn Uiepfx Am Uerp

Condition: used, Year of construction: 2000, total height: 1,600 mm, total length: 4,300 mm, total width: 840 mm, Colour: Grey - Details: - └ Description: The machine needs to be repaired - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: 404 - Number of units [pcs]: 6 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 15.8 - Power [kW]: 10.2 Lrjdpfx Ajykafaom Ujp - Transport dimensions: 4300mm x 840mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Custom-built triggering table for heads, shoulders, etc. 200 cm length Worktop 115x60 cm, triggering area No PVC panel included Stainless steel table offered without PVC worktop Approx. 20 tables in stock Lrsdpfx Amsykmrme Uop On many tables, the height and incline of the worktop can be mechanically adjusted

Condition: ready for operation (used), Hole Punch Centre cut Lrodeir A Haspfx Am Uop Slim line stitching heads

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Ledpfx Aox Twcpem Uerp

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Lodpfxey Dd Igj Am Ujrp Location: Nattheim

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Volvo FMX 500 6x2 with steering axle and Fassi loading crane: * Electro-hydraulically steered trailing axle * Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle * FMX safety day cab * 4900 mm wheelbase * Exhaust emissions in accordance with Euro 6 Stage D, with SCR, particulate filter and exhaust gas recirculation * Diesel engine 12.8 l, 510 hp/375 kW * 2,550 Nm engine brake Volvo Engine Brake * Automated 12-speed transmission * Liftable axle * Rear axle RSS1370A, single ratio, 13 t axle load, GZG 70 t * Drive axle ratio 2.64 * Driver Comfort driver package * Heated and electrically adjustable rear-view mirrors, robust, wide-angle mirror on both sides * Steel roof hatch, manually operated * Exterior sun visor * Interior sun visor with driver's mirror * Radio reception: AM/FM and DAB (analog & digital) * USB connection * 6 loudspeakers * Bluetooth connection for two telephones * Second driver info display, 7" bdisplay * Naviagation system * FMX lighting package * Bi-xenon headlights with automatic headlight range control * Headlight cleaning system * Automatic light switching between daytime running lights and dipped headlights * Rain sensor * Air suspension on front axle * Stiff front stabilizer bar * Reinforced rear stabilizer bar * Volvo Dynamic Steering (VDS). Active, electronically controlled steering assistance * Rear air suspension * Electronic level control * 2 batteries, 24V/225 Ah * Battery indicator in the display * 405 L aluminum tank on the right, D-shaped, 710 mm high, 1030 mm long * AdBlue tank on the right, usable capacity 64 liters * 2 foldable wheel chocks * Rockinger 400 G-150 trailer coupling * Central towing device at the front, reinforced * Electrical connection for trailer/semitrailer, 15-pin * Trailer/semitrailer connection Duomatic. * Trailer connections in the center * Stationary trailer brake (active up to 7 km/h) * Steel air reservoir * Aluminum rims Dura-Bright EVO (polished) * 2x VA tires 385/65R22.5 Continental * 4x AA tires 315/70R22.5 Continental * 2x NLA tires 385/55R22.5 Continental * Alternator 150A/4200W * Double fuel filter on the engine * Water separator for use with regular fuel quality in Central Europe * Power take-off, transmission side * Multifunction leather steering wheel * Steering wheel adjustment, height and tilt * Digital tachograph 4.0, generation 2 * Speed limiter 90 km/h * Cruise Control (cruise control) * Electronic Stability Program (ESP) * Adaptive cruise control (ACC) with collision warning and emergency braking function * Lane departure warning with steering assistance * Air conditioning with automatic temperature control and sun sensor * Immobilizer * Electric windows * Side sun visor, driver's side * Reversing alarm * Rear view camera, supplied loose, * Preparation for OBU (toll device, Toll Collect) * Wireless remote control, multifunctional * Comfort driver's seat, air suspension, heated, * Passenger comfort seat, air suspension, heated * Two armrests on the driver's seat * Auxiliary heating cab * Standard interior lighting * Additional thermal insulation for cab rear and side walls * Connection for air gun in driver's cab (gun & holder included) * Tinted windows * Front underride guard * Manual tilting device for the driver's cab * Front mirror * Daytime running light LED, "V-light" * Two rotating amber rotating beacons on the front cab roof * Jericho horn / compressed air fanfare * Roof antenna and preparation for CB radio * 4x work lights Lrsdpfx Ajrrtl Hsm Uep * Trailer de

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Lredpfozmf I Djx Am Ujp Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: new, Year of construction: 2026, The professional cast-iron belt–disc sander CORMAK BDS6x10 is a versatile workshop machine that ensures precise and stable machining of wood and plastics thanks to the combination of belt sanding and disc sanding functions. Main Advantages Two functions in one – a belt sander and a disc sander with the possibility of operating the belt both vertically and horizontally, maximizing application flexibility. Higher efficiency – the 750 W (S1) motor provides increased torque and constant rotational speed (2980 rpm). Enlarged working surfaces – a larger sanding disc (254 mm) and a wider belt (1219 × 150 mm) for more efficient processing of large workpieces. Precise angle machining – an adjustable work table (332 × 170 mm) with a miter gauge enables accurate sanding at a 45° angle. Lsdpexy Hrqsfx Am Ujrp Stability and durability – the base made of grey cast iron suppresses vibrations, ensuring maximum precision and long machine life. Efficient dust extraction – a 50 mm extraction port allows effective connection to an external dust collection system. Construction and Operating Parameters The BDS 6x10 belt–disc sander is built on an exceptionally rigid and stable grey cast-iron base, which minimizes vibrations generated during intensive operation. The 332 × 170 mm work table is designed for stable guidance of the workpiece and includes… Technical Specifications Motor power: 750 W Voltage: 230 V / 50 Hz Rotational speed: 2980 rpm Cable length: 1.8 m Table dimensions: 332 × 170 mm Dust extraction port: 50 mm Belt dimensions: 1219 × 150 mm Belt speed: 8 m/s Sanding disc diameter: 254 mm Sound power level: 93.3 dB(A) Sound pressure level: 80.3 dB(A) Gross weight: 41 kg Package dimensions: 495 × 760 × 470 mm

Condition: new, Year of construction: 2026, This sander is a machine designed for smaller carpentry workshops. Small dimensions allow for very high mobility of the machine. Movable table, graphite guide ensures constant speed and smooth belt movement, machine bed made of gray cast iron, linear gauge for precise grinding at an angle, high stability thanks to a solid base, discharge device. Technical data: Belt size [mm] 1220 x 150 Disc size [mm] 225 Work table size [mm] 310 x 190 Max. grinding length [mm] 590 Diameter of the suction nozzle [mm] 60 Grinding at an angle [º] 0º -45º Belt speed [m/s] 5.5 Disc speed [m/s] 23 Total engine power [W] 750 Lrjdpfx Amsvugrke Uop Weight [kg] 54 Warranty [months] 12 For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CORMAK MSM250 Belt and Disc Sander with Stand – A Professional Machine for Multiple Applications The CORMAK MSM250 multifunctional belt and disc sander is a modern and efficient combination sanding machine designed for industrial, workshop, and woodworking use. By combining both belt and disc sanding functions, this unit offers maximum flexibility and efficiency when working with metal, wood, and plastics. Equipped with high-quality NSK bearings, this sander operates extremely quietly, smoothly, and reliably over long periods. This sets it apart from the competition and ensures professional-grade performance. The belt sander with stand features a balanced rotor supported by ball bearings and a powerful motor with copper windings, delivering high torque – essential for intensive sanding tasks. An integrated 38 mm dust extraction port allows easy connection to a dust collection system, improving both comfort and safety during operation. Additionally, the CORMAK MSM250 disc sander with stand is equipped with an adjustable work rest and an IP54 protection rating – ensuring precision and operator safety. If you're looking for a reliable bench sander with universal application, the MSM250 model will meet the expectations of even the most demanding users. Key Features: Combination belt and disc sander – maximum functionality Industrial-grade NSK bearings – quiet operation and high durability Suitable for sanding metal, wood, and plastics – versatile applications Copper-wound motor – reliability and performance 38 mm dust extraction port – clean and safe workspace Stable stand – user comfort and ergonomic design Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 40 Belt size 1020 x 75 mm Belt grit P 80 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Voltage 400 V Ljdpfxoxfgw Rj Am Usrp Dimensions 570 x 310 x 1410 mm Weight 32.5 kg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods up to 40%

Condition: new, Year of construction: 2026, Industrial bench grinder equipped with two 300 mm diameter discs. The stable and rigid construction ensures quiet and vibration-free operation. Machine description Rotor design based on bearings from the world's best manufacturer NSK, ensure quiet and smooth operation and a long service life of the machine Powerful drive motor with high torque Adjustable guards made of durable plastic for effective spark protection Fitted with 35 mm diameter suction port, with possibility of connecting an extraction unit Adjustable workpiece supports Unlike the competition, the machine is equipped with industrial bearings from world-class manufacturer NSK. Technical specifications DIMENSION OF THE DISPLAY 300 x 50 mm disc, grinding wheel bore 75 mm GRINDING WHEEL GRIT K 36 / K 60 suction nozzle diameter 2 x 35 mm NUMBER OF RPM 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW Lrsdpfxjvlkwfo Am Usp VOLTAGE 400 V DIMENSIONS 700 x 430 x 1170 mm WEIGHT OK. 78.5 kg

Condition: new, Year of construction: 2026, The brush grinding machine with a base, equipped with 250 mm diameter wire brushes included in the set, makes this model ideal for both professional applications and hobbyists. The stable and rigid construction ensures quiet operation with no vibrations. Description of the CORMAK BMS2080 twin-brush sander Ljdpovlkm Tefx Am Uerp Rotor design based on bearings from the world's best manufacturer NSK, for quiet and smooth operation and long machine life Powerful drive motor with high torque Main switch and safety ‘mushroom’ switch Adjustable, sturdy workpiece supports Robust, stable base with tool cabinet Equipped with 50 mm diameter suction port, with possibility of connecting an extraction unit Technical data of the grinder BMS2080 SANDER DISPLAY SIZE 250 x 80 mm disc or grinding wheel bore 25,4 mm suction nozzle diameter 2 x 50 mm RPM NUMBER 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW VOLTAGE 400 V DIMENSIONS 800 x 440 x 1170 mm WEIGHT OK. 95 kg

Condition: new, Year of construction: 2026, CORMAK BMS250 Brush and Disc Multifunctional Sander – A Modern and Efficient Solution for Industrial Use The CORMAK BMS250 multifunctional brush and disc sander is a modern and high-performance combination machine designed for industrial, workshop, and woodworking applications. By integrating both brushing and disc sanding functions, this unit ensures maximum flexibility and efficiency when working with metal, wood, and plastics. Fitted with high-quality NSK bearings, the machine operates exceptionally quietly, smoothly, and reliably over extended periods. This feature sets it apart from competitors and guarantees professional performance. The brush sander with a stable stand features a balanced rotor mounted on ball bearings and a powerful motor with copper windings, providing high torque – essential for intensive sanding tasks. An integrated 60 mm dust extraction port allows for easy connection to an extraction system, improving both work comfort and operator safety. Additionally, the CORMAK BMS250 disc sander comes with an adjustable work rest and an IP54-rated enclosure, ensuring precise operation and protection for the user. If you're looking for a dependable bench sander with versatile capabilities, the BMS250 model will meet the demands of even the most discerning professionals. Lrjdpfsxfgz Nox Am Uep Key Features: Combined brush and disc sander – maximum versatility Industrial-grade NSK bearings – quiet operation and long lifespan Suitable for sanding metal, wood, and plastics – wide range of applications Copper-wound motor – durability and high performance 60 mm dust extraction port – clean and safe workspace Stable base – ergonomic and comfortable operation Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 36 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Dust extraction port diameter 60 mm Voltage 400 V Dimensions 600 x 400 x 1130 mm Weight 24 kg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods of up to 40%

Condition: new, Year of construction: 2026, Industrial bench grinder equipped with two 250 mm diameter discs. The stable and rigid construction ensures quiet and vibration-free operation. Machine description Rotor design based on bearings from the world's best manufacturer NSK, ensure quiet and smooth operation and a long service life of the machine Powerful drive motor with high torque Adjustable guards made of durable plastic for effective protection against sparking Adjustable workpiece supports Technical specifications SANDER BOARD SIZE 250 x 32 mm disc or grinding wheel bore 32 mm GRINDING WHEEL GRIT K 36 / K 60 RPM 2960 rpm MOTOR POWER S1 0,9 kW Lrjdpfx Amsvlkvhj Uep MOTOR POWER S6 1,5 kW POWER 400 V DIMENSIONS 530 x 310 x 1150 mm WEIGHT 32,5 kg

Condition: new, Year of construction: 2026, The Cormak M200S sander is a professional tool with high performance and precision. Equipped with a powerful drive motor, it provides fast and efficient grinding of various materials. The rotor design based on ball bearings ensures motor reliability and quiet operation. Plastic guards protect against sparks. This is a versatile tool that is easy to use thanks to the speed control and ergonomic handle. Ideal for professionals and hobbyists. Features of the M200S disc grinder The Cormak M200S grinder is a professional grinding tool that offers an excellent combination of high performance, precision and durability. Thanks to the rotor design based on ball bearings, this grinder guarantees motor reliability and quiet operation, which is important for both intensive use in the workshop and in domestic applications. The powerful drive motor of the Cormak M200S sander is equipped with high torque, which translates into efficient material removal and a fast surface finish. The number of revolutions provides the optimum sanding speed for a variety of materials. The motor power of 0.9 kW allows efficient material removal and rapid achievement of the desired results. Designed for use with 400 volts, ensuring stable power supply and efficient operation. Regardless of the type of material, be it wood, metal or plastic, this sander will meet all requirements. Lrjdpfx Aevlkttjm Ujp Equipped with a 200x32 mm fi sanding disc, it enables larger surfaces to be sanded efficiently. An important aspect that contributes to work safety is the Cormak M200S sander's plastic guards. As well as providing protection from sparks, the guards are lightweight yet robust, making them easy to manoeuvre and reducing operator fatigue. In addition, the intuitive control panel provides convenience and ease of use. If you are looking for a professional sanding tool that offers reliability, high performance and precision, the Cormak M200S sander is an excellent choice. Its robust construction, powerful motor, protective guards and ability to connect a dust extraction system make it an indispensable tool in the workshop, carpentry shop or during renovation work. Check the specifications and compare prices to find the best deal for your needs. Technical specifications of the M200S disc sander SIZING DIAGRAM 200 x 32 mm disc or grinding wheel opening 32 mm DISC GRANULATION K 36 / K 60 RPM NUMBER 2850 rpm MOTOR POWER S1 0,9 kW MOTOR POWER S6 1,5 kW VOLTAGE 400 V DIMENSIONS 520x300x1130 mm WEIGHT 26 kg

Condition: new, Year of construction: 2024, functionality: fully functional, UNITEK NICE 950 2N RKRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Sanding roller, rubber-coated, Ø 150 Finishing pad 50 mm Sanding belt motor power 15 HP Sanding belt speed 18/16 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning rollers Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 2 pcs. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Belt motor power 20 HP Automatic conveyor belt centering Oscillating cleaning blower, timer-controlled, 2 pcs. UNITEK NICE 950 1N KRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 1 pc. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Oscillating cleaning blower, timer-controlled UNITEK NICE 650 1N KRT Working width 650 mm Sanding belt size width x length 670 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/sec Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Self-centering of sanding belts using the system “ECO GEAR SYSTEM” Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness 2 rollers on infeed and outfeed table 1 dust extraction port Ø 160 Automatic work thickness positioning Lsdoznwp Ajpfx Am Ujrp Additional equipment (included in the price): Mobile cleaning blower for the sanding belt Warranty 12 months on spare parts.