Used Eht Ehps 110-3550-4050 for sale (5,847)

Condition: ready for operation (used), Heidenhain BC 110BF TFT monitor unit. 374 964-01, serial number: 24807913A, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Guodpfxsi Eagae Aqgoh

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Gujdsi Ebhhepfx Aqgjh

Condition: ready for operation (used), Indramat MAC093A-0-PS-4-C/110-A-0/WI560LV Permanent magnet three-phase servo motor SN:19865,used, normal signs of wear, 100% functional, scope of delivery as per photos Gedpfxjumfv Ie Aqgouh

Condition: used, mileage: 184,000 km, power: 70 kW (95.17 HP), first registration: 12/2011, fuel type: diesel, overall weight: 2,800 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Mercedes Vito 110 CDI / handbrake defective / Battery 100 Ah, wideband loudspeakers at the front, rear door (opening angle 180 degrees), wooden floor in the cargo area, metallic paintwork, radio preparation, seat belt system with warning system (driver’s side), socket (12V connection) in the cargo/passenger compartment, lining in the cargo/passenger compartment: plywood, auxiliary heater Adaptive brake light, airbag on the driver’s side, design: Vito panel van, exterior mirrors aspherical, both, exterior mirrors mechanically adjustable from the inside, both, mounting rails for roof rack, brake assist, windshield with antenna, generator 180 A, interior filter: pollen filter, body/superstructure: panel van, body/superstructure: compact, solid cargo compartment partition, steering wheel (steering column mechanically adjustable), truck registration, model revision, engine 2.1 L - 70 kW CDI, wheelbase 3200 mm, tire repair kit with compressor, low emissions according to exhaust standard Euro 5, sliding door cargo/passenger compartment on the right, seat cover/upholstery: fabric Lima, steel rims 6.5x16 Gedjumfzdepfx Aqgsuh

Condition: ready for operation (used), Indramat 093B-0-GS-2-C/110-A-2 Servo motor SN: 26939,used, good condition, 100% functional, scope of delivery as per photos Gjdoq N Ud Sepfx Aqgouh

Condition: used, PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter Gsdpfxsrfzt Tj Aqgjuh -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 Gjdpfx Aorgtfgoqgjuh -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Stephan Werke, gear motor -Speed: approx. 110 rpm -Engine: Type ZD434 -Power: 2.2 kW 1430 rpm -Design: B3 -Protection class: P 33 / E -Number: 1x motor available -Price: per piece Guedeptf Iaspfx Aqgjh -Dimensions: 640/270/H295 mm -Weight: 64 kg/piece

Condition: good (used), Absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, rotary indicator, resolver, rotary pulse encoder -Manufacturer: TR-Electronic, rotary encoder -Type: CE 65M -Item No.: 110-00210 -Voltage: 11-27 V -Shaft: Ø 10 x 20 mm -Dimensions: Ø 65 x 132 mm -Weight: 0.6 kg Gjdpfx Aqeqyi Ugsgsuh

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Godsrddh Iopfx Aqgeuh Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Gujdpfxed Nqlcs Aqgeh Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Fan efficiency: 82.9% Shaft power: 73.8 kW Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Voltage: 400 Volt / 50 Hz Year of manufacture: 1995

Condition: used, Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool for: press brake -Support for: press brake tool -see drawing: at the photos -Number: 2x documents available -Price: per piece -Dimensions: 3600/110/H32 mm -Weight: 76 kg Godpfx Ajfiqrmeqgeuh

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm Godpfxefldb Ns Aqgouh -Dimensions: 460/160/H120 mm -Weight: 36 kg

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, This 2 shaft rotary shear will completely refurbished. The cutting unit is equipped with 58mm blades, but can be adapted on request. The drive power is 2 x 75 kW. Godpofdvd Isfx Aqgsuh Fast knive change system incl. coupling. The machine includes a hydraulic pressure device, a feed hopper and a electrical cabinet including Siemens S7 control and coloured HMI 9". Painting can be adapted in a RAL colour on request.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Gsdoffh Atspfx Aqgjuh Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: new, bending length: 2050sheet thickness: 3upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: Guodpfx Aqjd Ab N Ajgoh - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.136,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: new, bending length: 1250sheet thickness: 4upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel Gedpfx Aqod Ab N Eogjuh - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 827,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: good (used), Oxy-fuel cutting device, Gsdpod Dti Iofx Aqgouh with rotary table ideal for cutting weld seams Rotary table diameter 285 mm Maximum cutting diameter 600 mm Overall height 1150 mm Width 900 mm Depth 500 mm

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Gedped N Apqofx Aqgeuh -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: 4 tank rollers -Load capacity: 30 t (7.5t per piece) -Support height: 110 mm Gedpfewx Hcijx Aqgsuh -Plates: 3x Ø 140 mm / 1x width 135 mm -Submission/Price: complete -Dimensions of transport case: 1005/200/H165 mm -Total weight: 57 kg.

Condition: like new (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 45 mm, Engel Victory 500/110 Tech Horizontal injection moulding machine with 110 tons clamping force, brand Engel, model Victory 500/110 Tech. Year of manufacture: 2004. Approx. 69,000 automatic operating hours. Includes a fully equipped production cell: ENGEL ERC 43/1-EA Robot (2004), conveyor belt, and safety fencing. The injection moulding machine is delivered RE-conditioned by our expert technical team and in optimal working condition. We can offer our customers on-site commissioning service, ensuring proper machine operation upon installation completion. Technical Details: Screw diameter: 45 mm Guodpsw Hbiajfx Aqgsh Year of manufacture: 2004 Operating hours: 69,000 Opening stroke: 507 mm Injection volume: 318 cm³ Injection pressure: 1016/(1603 increased) bar Maximum distance between platens: 800 mm Minimum/Maximum mould thickness: 300 mm (min) / 500 mm (max) Platen dimensions: 740x680 mm

Condition: new, power: 132 kW (179.47 HP), Year of construction: 2026, MCK 110 Mobile Jaw Crusher system, it breaks, sifts and washes stones. This special design facility consists of two groups. Guedpfx Aewfr N Uoqgeh The first group crushes the stones to the desired size with a mobile jaw crusher. The second group crushes them smaller. Also, the second group doing screening and washing stones. You can contact us for our customized solutions.

Condition: good (used), Year of construction: 1991, spindle moulder, spindle moulder, wood milling machine Godpowhbthjfx Aqgsuh -Manufacturer: SCM, table milling machine type T 110 A with table extension -Drive: 4 kW -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/8,000/10,000 rpm -Table extension: with stops on both sides see photos -Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm -Total weight: 550 kg

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Year of construction: 2002 Condition: very good Godeu D Udwopfx Aqgsuh Hablamos español Nous parlons français We speak English

Condition: new, GMN TSE 110 - 6000 / 1.75 high-speed spindle, SN:R346578, unused in opened original packaging, 100% functional, scope of delivery as per photos. Gujdpfx Aqsx Erp Uogeh