Used Eisele Lms I for sale (54,267)

Condition: used, functionality: fully functional, power: 24 kW (32.63 HP), color: orange, operation weight: 2,400 kg, Year of construction: 2020, operating hours: 2,400 h, Hamm HD12 i VT combination roller, new model Year of manufacture: 2020 24 kW Kubota engine, type D1803-CR Kdsdpszzpibefx Ag Asu 2,400 - 3,320 kg Edge cutting wheel 120 cm working width

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Ksdpfx Agozx Un Re Ajdu Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: used, mileage: 345,000 km, first registration: 06/2023, fuel type: diesel, gearing type: automatic, emission class: euro6, Equipment: air conditioning, central locking, Road tractor, automatic transmission, Veb, 345,000 km, side skirts, spoiler, air conditioning, rear air suspension. The price indicated above is excluding 22% VAT + transfer of ownership fees. Kdodpfxezxnq Se Ag Aju

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Kdsdpfx Agezwwndj Asu Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: new, I am selling new valves, dampers, and condensate pots, everything shown in the picture, also available individually. Purchased from Textilka, Switzerland. High-quality products, total weight approximately 4.5 tons. Kdjdpfxjzzfdzs Ag Aeu

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. Kjdjzyrpnjpfx Ag Asdu In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. Kjdpfezcpu Isx Ag Aedu The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: excellent (used), Year of construction: 2019, operating hours: 15,708 h, machine/vehicle number: 700167604, type of input current: three-phase, We offer this Bühler SORTEX A MultiVision I grain sorting machine in very good condition, manufactured in 2019. Manufacturer: Bühler Kjdpozbh Hmsfx Ag Aedu Model: SORTEX A MultiVision I Year of manufacture: 2019 The Multi Vision high-resolution inspection system focuses on the slightest color variations as well as light and dark color defects. The patented PROsize technology sorts products and foreign materials that have the same color as the quality product, using size characteristics. The machine is equipped with near-infrared spectroscopy (NIR) technology for visual color analysis. This allows the sorter to detect defective pieces or foreign objects of any color, even black. It also enables the detection of color defects. The machine is equipped with a new optical sorter, which achieves up to 50% higher rejection rates. SpectraVision was designed to provide maximum yield. Newly designed internal full-color cameras provide the best color resolution even for the smallest color defects, while new InGaAs cameras take the detection of foreign material (FM) to a new level. Innovative ejection algorithms significantly minimize false rejects, and new calibration and tracking algorithms improve machine consistency and reduce the number of false rejects. Default modes and programs for each product are pre-set and tested by SORTEX experts for optimal machine settings right out of the box. A simple user interface design and individual sensitivity control for each defect make it easy for the operator to maintain optimal machine performance. The machine's performance can be monitored from anywhere in the world, in accordance with Industry 4.0 standards. Machine setting changes are recorded and stored in the Bühler Insights system, and the SORTEX monitoring system enables real-time monitoring of sorting performance and emergency alerts.

Condition: new, PNOZ m EF 8DI4DO Kodpozgf Absfx Ag Aedu 772142 PILZ Partially unpacked for photography – unused item from stock clearance.

Condition: used, cutting range for steel to 0,5 - 120 mm capacity at 100% 440 A mm cutting medium PerCut 451 dimensions ca. 1030 x 680 x 1450 mm weight ca. 600 kg water cooling unit KWE 360 control PGC Contour Cut Kdodpozginhjfx Ag Aju Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means considerably higher flexibility. The inverter technology allows the highest marking quality and functionality. The HiFocus 440i neo is ideally suited for steel service centers, steel producers and distributors because it can be combined with 2D or 3D CNC-controlled guiding systems like gas cutting machines, robots and pipe cutting machines. With HiFocus neo the user benefits, compared to competitors, from higher speeds when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to optimised technology, the consumables are handled gently and the plasma cutting process is more efficient

Condition: used, mileage: 234,809 km, power: 345 kW (469.07 HP), first registration: 03/2025, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, VOLVO FH 460 4x2 I-SAVE, dual-circuit hydraulic system* – first registered: 03/03/2025 * 234,809 km Kodpfxszig Evo Ag Aedu * Automatic transmission * EURO 6 * 12,777 cc * 345 kW (469 hp) * Tires: * 1st axle: 385/55 R 22.5 * 2nd axle: 315/70 R 22.5 * Sleeper cab * Rear cabin suspension: air suspension * Tipping hydraulic system * Standard passenger seat * Driver's seat: Komfort, air-suspended * Seat upholstery: leather * Automatic climate control * Parabolic suspension (front) * Air suspension (rear) * Refrigerator box * German truck * Compact retarder * Engine is running! * Accident damage as shown in the pictures * All information without guarantee

Condition: used, Wilhelm Stehle 2/24 milling cutter sharpener Kedpfjzhuddox Ag Aodu

Condition: used, mileage: 330,000 km, first registration: 06/2023, fuel type: diesel, fuel: diesel, brakes: VEB, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, central locking, retarder, Road tractor, automatic transmission, Veb retarder, 330,000 km, side skirts, spoiler, air conditioning. Kdjdjzrpgbopfx Ag Aju Price listed above plus 22% VAT + transfer of ownership fee.

Year of construction: 2020, condition: used, functionality: fully functional, The i-Mark digital cutting machine Consisting of the I-Mark feeding system and the Graphtec CE-6000-60 Plus cutting plotter. The i-Mark system, as a digital cutting machine, enables operator-free contour cutting of adhesive films and digital prints on cardboard, screen prints, and other printing products. The movable arm of the digital cutting machine, which is equipped with a vacuum suction system, lifts the sheets from the input tray and feeds them to the plotter. Depending on the thickness and stiffness of the sheets, the i-Mark digital cutting machine can process 40 to 120 sheets. While the machine is running, additional sheets can be added without stopping the machine. The system is equipped with an internal vacuum compressor, which does not require any external air connections. The i-Mark digital cutting machine. Kdodpsz A D Tbsfx Ag Aou

Condition: new, Year of construction: 2012, functionality: unexamined, machine/vehicle number: Modelo Y15V # de Serie C12070192, screw diameter: 22 mm, displacement volume: 36 cm³, injection pressure: 1,417 bar, injection weight: 44 g, ejector stroke: 200 mm, plate length: 240 mm, plate width: 200 mm, plate height: 40 mm, total length: 1,200 mm, total width: 1,200 mm, total height: 2,400 mm, overall weight: 700 kg, heating capacity: 2 kW (2.72 HP), power: 2.2 kW (2.99 HP), type of input current: AC, input frequency: 60 Hz, input voltage: 220 V, I am selling 3 Guan Ming Y-15 V machines and 1 Y-25V machine, all new from old inventory. They have been stored in their original packaging since they were received from China in 2012 and have never been put into production. There are 3 machines with a capacity of 15 tons and 1 machine with a capacity of 25 tons. The Y-15V machines have a 22 mm screw and a maximum injection capacity of 44 grams. The Y-25V machine has a 30 mm screw and a maximum injection capacity of 103 grams. All 4 machines are located in Tepotzotlán, State of Mexico. They are sold without molds, accessories, or spare parts. Price plus VAT. Loading, crane, maneuvering, insurance, and transportation are the responsibility of the buyer. Kdjdpsz Aby Uefx Ag Aou The machines are sold subject to inspection and testing by the buyer. Payment must be made before the machine(s) are removed.

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Kdsdpfx Aozb Iihsg Aou Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Max. axle length wheel set:26450mm Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Ksdpjy Uvgcofx Ag Aodu Number of slides: 2 Length: 3500mm Width: 2000mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Kjdpfx Asy Ufgrsg Aodu Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: Kdedpfxjy Ufgxe Ag Aou The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts.

Condition: used, Euro Classic range – Inox finish Electrical power 400 V three-phase Power supply 3N~ 50/60 Hz Maximum power 9.5 kW Average hourly consumption 4.5 kW/h Capacity 9 pizzas Ø 30 cm Tray capacity 2 x 600 x 400 mm Chamber 930 x 930 x 170 mm Kedpfx Agjzx Dzts Aedu Maximum temperature 450 °C Independent digital regulation for dome / hearth Dome, hearth, walls, and bottom made of refractory material Heating elements inserted into the stone Counterbalanced door with lower swing Panoramic glass window Protected internal halogen lighting External dimensions 1320 x 1260 x 400 mm Net weight 200 kg Stackable up to 3 chambers General description The Italforni Euro Classic EC9-I professional electric pizza oven features a 930 x 930 x 170 mm chamber that can bake up to 9 pizzas with a diameter of 30 cm simultaneously or accommodate 2 trays of 600 x 400 mm. It reaches 450 °C and benefits from independent electronic digital regulation for the dome and the hearth. What makes this model stand out Its chamber is entirely made of high-density refractory material: dome, hearth, side walls, and bottom. This design promotes insulation, thermal homogeneity, and temperature recovery, as advertised for this model. The armored “hy•pe” heating elements are inserted directly into the stone to limit energy loss. Key advantages Capacity of 9 pizzas Ø 30 cm Independent dome / hearth regulation Entirely refractory chamber Maximum temperature of 450 °C Counterbalanced door with panoramic window Protected internal halogen lighting Stackable up to 3 chambers, and a smoke extraction module is possible.

Year of construction: 1999, condition: used, Saw blade diameter: 300 mm Manual material clamp Kdedpfx Ajw Im Treg Aju Minimum quantity spray device Good condition 120 kg

Condition: new, functionality: fully functional, machine/vehicle number: YV2RT40A6SA373948, mileage: 683 km, power: 375 kW (509.86 HP), first registration: 10/2025, fuel type: diesel, empty load weight: 8,336 kg, maximum load weight: 9,664 kg, overall weight: 18,000 kg, tire size: 385/55 + 315/70 R 22.5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,700 mm, next inspection (TÜV): 10/2026, fuel: diesel, fuel tank capacity: 975 l, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, full service history, hill-start assist, lane keeping assist, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, second fuel tank, soot filter, spoiler, tire pressure monitoring, traction control, our vehicle number: #30738 Volvo FH 500 Standard Tractor Unit Cab: AERO Globetrotter XL, rear air suspension Euro 6 DPF diesel particulate filter Additional brake: Retarder Wheelbase 3,700 mm Full air suspension Tyres: 385/55 + 315/70 R 22.5 Alloy wheels 2x diesel tanks: 610 + 365 liters Automatic transmission: I-Shift Automatic climate control Auxiliary heater Stationary air conditioning I-Park Cool ABS EBS ASR Differential lock Cruise control ESP ACC adaptive cruise control AEBS advanced emergency braking system Lane keeping assist Driver fatigue alert Side collision avoidance assistant Turning assistant I-Torque incl. I-Roll & brake cruise control I-See 2 beds Electrically adjustable, leather, air-sprung driver's seat/heated/ventilated Refrigerator Info & Media package High DAB+ Camera monitor system (CMS) Reverse and right-side close-range camera Full side skirts LED cornering lights LED daytime running lights LED headlights with adaptive high beam Headlamp cleaning system LED fog/work lamps Light/rain sensor Air horn Electric windows, 2-way VAS Tire pressure monitoring system Electric sun blind Sun blind left/right Leather multi-function steering wheel On-board computer Electric sunroof Central locking with remote control Kdedpfxsx A Ew Do Ag Aeu Traffic sign recognition Reversing warning system TV pre-installation Hill start assist Leasing or hire purchase/financing available on request!

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine Kdodpfsx A Uc Asx Ag Asu * ​​Product on order * Net price

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, travel distance X-axis: 1,700 mm, travel distance Y-axis: 400 mm, controller model: Siemens 840 D, No reserve price – guaranteed sale to the highest bidder! The machine underwent a full overhaul in 2015 and was retrofitted with a Siemens 840 D CNC control system! TECHNICAL DETAILS Kdjdpfjx Db S Tex Ag Aju Faceplate diameter: 2,000 mm Turning diameter over table: 2,200 mm X-axis travel: 1,700 mm Z-axis travel: 400 (+550) mm Stepless faceplate speed range: 0.28–160 rpm Center height over table: 1,140 mm Main spindle diameter: 285 mm Spindle bore: 100 mm Torque at faceplate: 25,000 Nm Max. workpiece weight: 5,000 kg MACHINE DETAILS Control: Siemens 840 D Total power requirement: 75 kW Dimensions & Weight Space required: approx. 6 x 3.5 x 3 m Machine weight: approx. 21 t

Condition: used, mileage: 243,582 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, Volvo FH 500 Globetrotter XL Retarder I-Save * German vehicle * EURO 6 E * Retarder * Leaf / air suspension * XL cab * I Park Cool (stationary air conditioning) * Auxiliary heating * 2 beds * Refrigerator * ACC adaptive cruise control * Turn assist system * Emergency brake assist * Roof hatch * Dual fuel tank system * Navigation system * Roof and side flaps * Multifunction steering wheel * LED headlights * Automatic transmission * Differential lock * Central locking with remote control Kedpfx Agjx Tb Dwe Ajdu Subject to prior sale and errors excepted! Sale exclusively according to our General Terms and Conditions (GTC) Important Notice: Despite carefully checking all details in our offer, errors may still occur. Some of these result from transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal Information: This sales listing does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. All information provided here is without guarantee and does not constitute warranted characteristics.