Used Erlo Gp.40 for sale (22,169)

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. Bdodpoq Nyuvjfx Ad Aeb 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: used, machine/vehicle number: 008407, X axis working area: 6700 mm Y axis working area: 1520 mm Bodoycdaxepfx Ad Asdb Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 48

Condition: used, machine/vehicle number: 008471, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Bdedpfeywaf Uox Ad Aob Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008473, X axis working area: 4900 mm Y axis working area: 1680 mm Working Table: Pod and Rail Bdedpfoywaf Iox Ad Aob Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Stamp speed: 7.5 m / min max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Bdodjcxb Nmspfx Ad Aeb Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Bdodpsy H I Ngofx Ad Aob • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, maximum load weight: 37,400 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 01/2020, next inspection (TÜV): 02/2027, total width: 2,550 mm, total height: 1,750 mm, Year of construction: 2020, Stated prices are exclusive of BPM and apply only for export. Bedey Iq Syspfx Ad Ajdb

Condition: excellent (used), Year of construction: 2019, operating hours: 6,854 h, lifting height: 4,100 mm, fuel type: gas, mast type: duplex, power: 55 kW (74.78 HP), total height: 2,840 mm, total length: 3,000 mm, total width: 1,450 mm, color: other, Year of manufacture: 2019 Bdjdpfx Adex Adubs Ajb Empty weight: 6.350 kg Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE

Condition: excellent (used), Year of construction: 2018, operating hours: 11,085 h, lifting height: 4,100 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), motor manufacturer: Volkswagen, total height: 2,870 mm, total length: 3,050 mm, total width: 2,020 mm, color: other, Equipment: air conditioning, Year of manufacture: 2018 Empty weight: 6.255 kg Bsdpfxjwvl Sqo Ad Aedb Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Blower - Radio - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE Double tyres, Airconditioning, Durwen forkpositioner and side shift, Mast suspension

Condition: used, axle configuration: 3 axles, first registration: 06/2015, color: other, Year of construction: 2015, Empty weight: 4.930 kg Axle 1: left 12 mm right 12 mm Axle 2: left 10 mm right 10 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers! Bedpfsy In U Sex Ad Aodb

Condition: good (used), Year of construction: 2015, operating hours: 19,297 h, load capacity: 4,000 kg, lifting height: 6,015 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, FULL cabin LINDE control - Duo pedal !!! Led spotlights Road lighting Linde pilot system Bdjdpsy Itdfefx Ad Aob

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2011, suspension: air, tire size: 385/65R22.5, color: grey, Year of construction: 2011, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Bdodpfxjyrgi Us Ad Aob Weights Empty weight: 5.680 kg Carrying capacity: 32.320 kg GVW: 38.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks

Condition: used, axle configuration: > 3 axles, first registration: 04/1997, loading space length: 8,650 mm, loading space width: 2,750 mm, suspension: steel, tire size: 235/75R17,5, wheelbase: 1,100 mm, Year of construction: 1997, Drivetrain Drive: Wheel Axle configuration Tyre size: 235/75R17,5 Suspension: leaf suspension Axle 1: Double wheels Axle 2: Double wheels; Steering Axle 3: Double wheels Axle 4: Double wheels Weights Empty weight: 9.600 kg Carrying capacity: 30.400 kg Bdedpfxjy Ib Nis Ad Ajb GVW: 40.000 kg Functional Make of bodywork: GHEYSEN VERPOORT Height of cargo floor: 87 cm

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be Bsdjydh Agjpfx Ad Asdb lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Year: 2006 Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Bjdjy Icgispfx Ad Aedb Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Bdsdpoy Ipbmofx Ad Aob Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: good (used), Year of construction: 2007, Traverses X Y Z: 1270 x 660 x 635mm, Table 1321 x 584mm, Bdedpoy Eyauofx Ad Ajb Spindle Speed 0 – 7500rpm, Spindle taper BT 40, Spindle Motor 20Hp, HAAS Control, 20 Station tool change, coolant

Condition: used, SPECIFICATIONS Drilling capacity steel Ø 35 mm Drilling capacity cast iron Ø 40 mm Tapping M25 Spindle taper Mk 4 Spindle diameter Ø 60 mm Spindle travel 180 mm Max. distance spindle - table 80 mm Min. distance spindle - table 870 mm Floor / table area 700 x 600 mm Power 2.2 kW Spindle speeds / ranges 65 - 1750 VARIO rpm Bdjdpfxjy Hmpro Ad Asb DIMENSIONS Length 1200 mm Width 800 mm Height 2400 mm

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,403 h, load capacity: 4,000 kg, lifting height: 3,480 mm, fuel type: diesel, mast type: telescopic, construction height: 2,250 mm, fork carriage width: 1,400 mm, fork length: 1,200 mm, empty load weight: 6,591 kg, drive type: Diesel, Diesel Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical Condition: Very good Front Tire Type: Superelastic Front Tire Size: 250-15 Rear Tire Type: Superelastic Rear Tire Size: 250-15 Bsdpfey Iicdox Ad Aedb Description: In addition to this unit, we offer a wide range of forklifts and warehouse equipment. All of our machines are workshop-inspected and FEM 4.004 certified. Please contact us via email or by phone. You can also find us at hsr-gabelstapler. Of course, we are also interested in buying your used equipment, regardless of whether you purchase a vehicle from us. Lease-purchase and financing at attractive conditions are available upon request. We will be happy to provide you with comprehensive and professional advice regarding our vehicles. Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, particle filter, full cabin, safety light, interior mirror, exterior mirrors, joystick, wiper, single-pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,261 h, load capacity: 4,000 kg, lifting height: 3,680 mm, fuel type: electric, mast type: telescopic, construction height: 2,650 mm, fork carriage width: 1,040 mm, fork length: 2,350 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Superelastic Front tyre size: 250-15 Rear tyre type: Superelastic Rear tyre size: 21x8-9 Battery voltage: 80V Battery capacity: 930Ah Bdedpfoy Iib Tsx Ad Aob Battery manufacturer: Habat Battery type: PzS Battery year: 2009 Description: In addition to this machine, we offer further forklifts and warehouse equipment. All our machines are workshop-inspected and FEM4.004 tested. Please contact us via email or phone. You can also find us at hsr-gabelstapler. We are also happy to purchase your used machine, even if you don't buy a vehicle from us. Lease-purchase and financing on favourable terms are available upon request. We are happy to advise you professionally and in detail about our vehicles. Side shift, 3rd valve, rear work light, front work light, half cabin, interior mirror, rotating beacon, windscreen wiper, single-pedal drive, LED, seat,

Condition: used, ► 40-foot HIGH CUBE (HC), used, sea transport-ready ◄ ✍️ Dimensions External: 12,192 x 2,438 x 2,896 mm (LxWxH) Internal: 12,032 x 2,352 x 2,698 mm (LxWxH) Door opening: 2,340 x 2,585 mm (WxH) Bdodpfjy Ihppsx Ad Aeb ⚙️ Features: Wind and watertight Cargo worthy (suitable for international transport) Refurbished and ready for immediate use 5-year valid CSC certificate (comparable to vehicle inspection) ⤴️ Additional services on request: Custom modifications such as conversions, repainting, and much more available ⚡️ Fast delivery possible, including unloading Please provide postcode for a non-binding offer _____ ✅ We are happy to provide you with a tailor-made quotation.

Condition: good (used), Capacity up to 40 mm Mount: Mk-4 Bsdpsy Ht H Rjfx Ad Asdb Left/right rotation Variable speed with variator drive

Condition: like new (used), functionality: fully functional, We offer high-quality conversions of sea containers – perfect as mobile offices, break rooms, retail spaces, or tiny homes. The containers are robust, weatherproof, and can be individually equipped according to customer specifications. Equipment (example shown in pictures): - Basis: 20ft or 40ft High Cube sea container - PVC or wood flooring - Double-leaf door with insulated glass - Windows with tilt function and security locks - Walls available painted or insulated on the inside - Optional: electrics, heating, insulation, furniture, and air conditioning Technical specifications: - 20ft: approx. 6.06 m × 2.44 m × 2.90 m - 40ft: approx. 12.19 m × 2.44 m × 2.90 m - Material: Corten steel (wind- and waterproof) Bjdpfoy Ihz Esx Ad Aodb - Nationwide transport and delivery possible ✅ Ready for immediate use ✅ Robust, durable steel construction ✅ Custom designs available ✅ Modern appearance

Condition: used, functionality: fully functional, ► 40-foot HIGH CUBE (HC), used, sea transport-ready ◄ ✍️ Dimensions External: 12,192 x 2,438 x 2,896 mm (LxWxH) Internal: 12,032 x 2,352 x 2,698 mm (LxWxH) Door opening: 2,340 x 2,585 mm (WxH) ⚙️ Features: Wind and watertight Cargo worthy (suitable for international transport) Refurbished and ready for immediate use 5-year valid CSC certificate (comparable to vehicle inspection) ⤴️ Additional services on request: Bdedsy Ihn Sjpfx Ad Aob Custom modifications such as conversions, repainting, and much more available ⚡️ Fast delivery possible, including unloading Please provide postcode for a non-binding offer _____ ✅ We are happy to provide you with a tailor-made quotation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Bjdpfjy Iddpex Ad Aodb Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp