Used Ersa Ecoselect 2 for sale (77,019)

Condition: used, mileage: 25,000 km, power: 335 kW (455.47 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #448 Mercedes-Benz Arocs 2546 L 6x2 with KRÜGER SSP 14-1 Body: KRÜGER Fahrzeugbau * Tank material: stainless steel 1.4301 * Approx. 14,000 liters (air volume) * Approx. 1,000 liters of flushing water volume (unpressurized) * Emptying via rear tipping Chassis: Mercedes-Benz Arocs * 2546 L 6x2 V 11 * Powershift 3 transmission * 455 hp/335 kW * EURO 6e * Fuel capacity: 510 l * Cab color: MB 9147 Arctic White * 2x LED rotating beacons on the cab * Rear view camera * Navigation * Air conditioning system CVS VacuStar W1600 vacuum system, approx. 1540 cm3/h at 400 mbar * Fully hydraulic, low-maintenance drive * Suction hose reel for 80 m DN 75, hydraulic Speck NP30/100-150 high-pressure system, 100.0 l/min at 150 bar * Fully hydraulic, low-maintenance drive * Small hydraulic high-pressure hose reel for approx. 80 m DN 13, hydraulic Special features: Lower and upper suction nozzles in DN 100, remote-controlled * Aluminum tool box on the right and hose tray on the left * Hand washing device * High-pressure gun and various holders * Soundproofing panel on the left * 6x LED ambient lighting * Radio remote control * Tiltable scrap box * Ladder with bracket and anchor points * Advertising board on the left and right Container * Rearview camera * Vice Iasdpfxev Nu Shs Ab Njt For further detailed information and/or pictures, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is responsible for verifying the condition and features of the goods. The sale is subject to our terms and conditions and excludes any warranty.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Iaedjupwa Ropfx Ab Not Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Ijdpfjv Sut Rex Ab Noat

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates Iodexbhp Hjpfx Ab Neat - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types Iedpofpif Dofx Ab Nsat -Chuck size: Ø 210 mm -Weight: 124.2 kg

Condition: like new (used), functionality: fully functional, color: orange, Year of construction: 2014, Our company is offering for sale a Sandvik DD210V One Boom Face Drill Rig for tunnels up to 25 m² UNIVERSAL 360 GRADE, "as new" condition,purchased directly from France and not used. The sale is due to the postponement of a planned project. Price: €330,000 Location: Albania Condition: As new – fully original machine, inspected, tested, and repainted. Main Technical Data: Manufacturer: Sandvik , Model: DD210V One Boom Face Drill Rig for gallery section up to 25m2, Year of manufacture: 2014, Operating hours:935 hours (767 drilling only), Engine: Deutz water-cooled, Power (Power Pack 1): 45 kW (60 hp), Electrical supply: 380V–440V, 60Hz; Boom: B14NV; Feed (Left): NTV 6/10 Split feed; Drifter (Left): HL510Bar; Ansul Fire Suppression System. Isdpfx Asxpvyvjb Njat

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad Iedpfjxaa N Nex Ab Neat engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, total length: 1,240 mm, total width: 835 mm, Hello, Ijdpfx Absupumuo Noat I sell sheeted containers - metal 1/2 new - dimensions 1240 x 835 x 500 mm - weight of the container about 55 kg - payload 1000 kg - new containers - price 115 eur/net/unit. - sale only against VAT invoice

Condition: new, functionality: fully functional, machine/vehicle number: 18262080, empty load weight: 580 kg, maximum load weight: 2,120 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,150 mm, color: black, Year of construction: 2026, Load area approx. 2150 mm x 4000 mm External dimensions approx. 2160 mm x 5550 mm Permissible total weight: 2700 kg Payload: approx. 2120 kg (payload may vary depending on optional equipment) Manufacturer: Temared Iedpfevr S Edox Ab Noat Special features - Car transporter trailer "Universal" - Steel frame (bolted) - Ramp compartment under the loading platform - Loading ramps (steel) - Hand winch (manual) - 8 lashing rings in side profiles - 2 lashing rings in the front frame profile - Additional longitudinally mounted lashing rings in the frame profile Further equipment - Floor: wooden panel - Tyres: 195/55R10C - Chocks + bracket Running gear - Rubber torsion axle with independent wheel suspension | V-drawbar with towing hitch | Jockey wheel | Electrics - 12 Volt | 13-pin plug | Side marker lights | Clearance lights If you would like to buy this trailer or have further questions regarding car transporter trailers, please use our internal car transporter trailer reference "No. 18262080".

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Iodpfsx Tqg Ujx Ab Nsat Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: used, mileage: 1 km, axle configuration: 4x4, gearing type: automatic, Year of construction: 2007, GVW: 1 kg Ijdsx R T Uvepfx Ab Njat Please contact Emal Jaweed for more information

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Iodpfxeuprqwe Ab Njat Used, functional condition

Year of construction: 2019, condition: used, Sharpening machine for TCT bandsaw blades Forestone 2 Iaodpfxoyabv Ss Ab Njt

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Isdpfx Aeih Dxdeb Neat Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Iaodpfx Aocnxa Sob Net Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Isdpfxsd Hx E Ij Ab Neat Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: new, Year of construction: 2025, Description Isdpfx Abeff Hdpe Noat Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm Iodpfxoff Hdmo Ab Neat fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Isdpfx Abodqzh Tj Njat Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Ijdpfx Asff Efcob Neat Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: new, Year of construction: 2025, CASADEI PF 520 M Tersa - Professional planer with 520 mm planing width and motorized adjustment of the planing table. large dimensioned jointer tables made of grey cast iron, hardened and tempered sturdy cast steel construction for precision and longevity the stable dressing fence is easily movable and offers a large supporting surface large dressing fence, inclinable 90° - 45 the inclination of the fence can be easily read from the workplace standard with auxiliary fence large four-blade shaft, precision bearing mounted smooth running due to precision unit and heavy cast iron construction powerful 7,0 kW (S6) motor maximum user safety with simplest operation Scope of delivery: PF 520 M Tersa Swivelling auxiliary fence TX-Matic planing shaft protection device Reinforced main motor 7,0 kW Iedpfxob D Sble Ab Njat Technical data Total length of the planing tables 2960 mm Planing width 520 mm Dimensions planing fence 1100 x 160 mm Swivel range planing fence 90 - 45 Max. chip removal chip removal 8 mm Planing shaft Ø / number of planing knives 120 mm / 4 pcs. Speed 5000 1/min Motor power 400 V / 50 Hz / P2 / S1 7,0 kW (9,0 PS) Suction nozzle diameter 120 mm Weight Location: ex stock Bitburg Immediately available

Condition: new, Year of construction: 2026, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Iodpfsih Dxlex Ab Nsat Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5,0kW Sliding carriage and table sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2001, condition: excellent (used), Weishaupt GL 30/2-A dual fuel burner -Version Z: Output 300-2150KW: year of construction:2001 Iaodjf Src Repfx Ab Njt Oil throughput 40-180 kg/h With existing fittings Dungs DN50 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: not inspected (used), Year of construction: 2010, Machine is operational to our best knowledge. Has integrated cooling system and auto width adjustment. Iasdpfeu E H R Eex Ab Njt Ask for further details! Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!

Condition: used, mileage: 178,123 km, power: 240 kW (326.31 HP), first registration: 04/2012, fuel type: diesel, empty load weight: 17,155 kg, maximum load weight: 8,845 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, next inspection (TÜV): 01/2026, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 4, total length: 10,045 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, traction control, Zöller Medium XXL No. A0002260 Zöller 456.130 120/240/1100/U5 sunblinds, side camera Non-binding offer—subject to changes and prior sale—The sale takes place excluding any warranty—All information provided without guarantee! Iodpewp Hduofx Ab Neat