Used Felder K700 S for sale (69,145)

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Iijdpfx Anezcqxus Hef Delivery terms: ex warehouse

Condition: ready for operation (used), functionality: fully functional, Equipment: foot remote control, Geka Hydrocrop Hydraulic Ironworker Model: 70 S Angle (90 Degrees):130 x 130 x 13mm Flat: 450 x 15mm Round: 45mm Iiedpfxjzux N Rj An Hsf Square:45mm Punching: 28 Dia Through 20mm Dimensions: 2000 x 1200 x 2000mm High Weight: 1800 Kgs

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: Fanuc, spindle nose: HSK 32, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used CHIRON FZ 08 S vertical machining center, manufactured in the year 2000. Iiedpfxozqfyne An Hof The machine was used for single-shift operation. As it is our only Fanuc machine, we are now selling it. The machine has a memory expansion and was refurbished by Chiron in 2013. Unfortunately, no documents about this are available anymore after more than 10 years. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, cutting length (max.): 3,000 mm, cutting height with scoring (max.): 40 mm, cutting width at rip fence: 1,250 mm, trimming length: 3,000 mm, Equipment: saw blade guard, - Austrian-made - With scorer TECHNICAL SPECIFICATIONS: - Table carriage length: 3000 mm - Max. main blade diameter (without scorer): 315 mm - Max. main blade diameter (with scorer): 250 mm - Blade bore diameter: 30 mm - Max. cutting height with 250 mm blade: 40 mm - Spindle lock - Main blade adjustable up/down and at an angle - Blade guard - With carriage - Cutting width at the fence: 1250 mm - Main motor: 4 kW - Fence with latch: 1700 / 2600 mm - Scorer - Max. scorer blade diameter: 80 mm - Scorer spindle diameter: 20 mm - Scorer motor: 0.65 kW - Extraction port diameter: 100 mm - Shipping dimensions (L/W/H): 325 / 190 / 130 cm Ijdpfx Ansxm Rm Ss Heif - Weight: 500 kg

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Ijdpfxozuvyao An Heif Year of manufacture: 2014, available from the end of August.

Condition: good (used), Code: 0435 Brand: FELDER - AUSTRIA Model: G 560 - CE Standard Automatic edge bander with grinding units for applying wooden, abs, pvc, veneer edges to joinery, furniture, custom-made furnirture, panels, doors, kitchens and other items – CE Standard Technical data: Iedpfxezkhlgo An Hsif Edge thickness 0,4–5 mm Min/max panel height 10/60 mm Workpiece feed speed 9 mt/min Configuration: Adjustable infeed guide Set of 2 diamond infeed grinding units for perfect panel grinding Tool diameter 60 mm Bore 25 Tool height 60 mm N° 4 cutting edges Rotation speed 12000 rpm Motor power 1,1 Kw each Gluing unit Pvc shears End cutting unit: Blade diameter 100 mm Bore 20 – Blade inclination 0-5°– Blade rotation speed 12000 rpm End trimming unit: Tool diameter 77 mm Bore 20 – Rotation speed 12000 rpm Edge scraper unit Glue scraper unit to remove any glue residue Touchscreen control panel Support table for large panels Soundproof protection cabin Suction inlets: 1 Ø 120 mm – 2 Ø 80 mm Compressed air 6–7 atm Overall dimensions mm 3200 x 900 x 1500 mm Weight kg 900

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm Iedpjww Hhvsfx An Hsif - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Year of construction: 2022, condition: like new (used), functionality: fully functional, REF: MM6430 1 x Easibelt Coveya horizontal mobile conveyor with inverter. Manufacturer - Coveya Ltd Model - EB300 S/S. Date of manufacture - 2022. Belt dimensions - 10500mm L x 300mm W (270mm useable) x 920mm H (height adjustable frame). Distance between flights on belt - 950mm. Condition - Excellent, used for one season packing advent calendars. Ijdpsy Unm Isfx An Hjif

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet Ijdpfxjxxavms An Heif

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: GLAA000683IA, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, Shop-Floor package The Shop-Floor capability package ensures reliable results even in the challenging conditions of shop-floor environments. Advanced multi-sensor structural thermal compensation enables GLOBAL S to compensate for fluctuating temperatures (15-30 °C range) while covers and bellows provides a higher level of protection from dust and dirt. The package includes a selection of options ideal for shop-floor dimensional inspection workflows. The kit includes: • Advanced multi-sensor structural thermal compensation • Machine accuracy specifications in the Shop-Floor Temperature range 15-30 °C • Machine improved accuracy specifications in the Extended Temperature range 16-26 °C • Bellows and cover for the X axis and Y axis (left side). Accuracy: MPE (E0,MPE/ E150,MPE) = 1.5 + L/333 μm MPE (THP)/ MPE (τ)= 2.9/45 μm/seconds Measuring range: X = 500 mm; Y = 700 mm; Z = 500 mm; High speed: Max 3D speed: 500 mm/s Max 3D acceleration: 1700 mm/s2 DC241 Controller NJB Jog-Box PROBING CONFIGURATION HH-A-T2.5° Automatic Probe Head The HH-A-T2.5 is a ram mounted probe head that is capable of indexing in 2.5° increments and can achieve 12,240 unique positions. The head features a number of new innovations including an embedded controller and capacitive crash protection. Technical Specifications: • Indexable axis A (Roll): +105°, 2.5° index • Indexable axis B (Pitch): +180°, 2.5° index • Rotation Speed: 90° in 2.5 sec. • Max applied torque: 1.4 Nm • Probe Mounting: TKJ Kinematic Joint • Max. Extension bar: 450 mm HP-S-X1S Scanning Probe The HP-S-X1 supports all the standard probing modes like: Single Point Probing, Self-Centering as well as Continuous High Speed Scanning for fast and accurate form and profile measurements. The HP-S-X1S kit includes: HP-S-X1S scanning probe, Styli stet and the AC/DC probe interface. HP-S-X1S Technical Characteristics • Probe Type: Analogue • Probe Dimension: Ø 30 mm x 109 mm • Styli Length Range: vertical: 20 - 115 mm; horizontal: up to 20 mm • Max. Styli Weight: 20 g (incl. styli clamping) Iodezuk Acepfx An Heif • Styli holder Weight: 7 g or 8 g • Stylus Joint: M3 thread • Over Travel Range: ± 2 mm in all axes Ceramic Calibration Sphere: Ø 25 mm TOOL CHANGER HR-X1 Automatic Styli Changer Rack – HR-X-400 The HR-X1S / H styli changer is available from min. 3 ports to max. 9 ports. It allows a fast styli changes, in automatic mode, during the measuring cycle Standard version supplied with 3 ports - HP-X1-P-SF. Styli holder HP-S-X1S-1 (2 pieces) Styli holder HP-S-X1S-2 (1 piece) PC DELL 3630 Workstation Desk Extension PC-DMIS CAD++ EATON 9SX 2000 UPS

Condition: excellent (used), Thickness planer Felder D963 Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Iiodpfoxdmu Tox An Hef Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS Iiedpfsw H Rzxsx An Hsf – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Milling machine Year of construction: 2025 Work table, clamping surface: mm 1500 x 1000 Table height: mm 750 Number of T-slots: 7 Size of T-slots DIN 650: mm 18 Travel distances X-axis: mm 1500 Y-axis: mm 1000 Z-axis: mm 700 Distance: Table top edge - Spindle bottom edge min/max: mm 150 / 850 Main spindle drive for speed 8000 min-1 Tool holder: SK 40 AC motor, frequency-controlled: kW 26 at 44% duty cycle Speed range: min-1 15 – 8000 Torque: Nm 245 Coolant system Band filter system Feed drives Iiodjzvbaujpfx An Hjf X-axis AC servo motor: kW 3.5 Y-axis AC servo motor: kW 2.0 Z-axis AC servo motor: kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect position measurement system. Accuracy Positioning accuracy X and Y axes over 1000 mm: mm ± 0.0150 Repeatability X and Y axes: mm ± 0.0075 Positioning accuracy Z axis: mm ± 0.0150 Repeatability Z axis: mm ± 0.0075 Tool magazine, 24-position mounted on the left side of the machine - Tool positions: 24 - Tool shank (DIN 69871 / 69872): SK 40 - Max. tool diameter: mm 76 - Max. tool length: mm 250 - Max. tool weight: kg 8 Machine control: Heidenhain iTNC530 Ex works, unloaded, plus statutory VAT. No guarantee.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE Iisdpfx Anoztpw Nj Hsf - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 1973, rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Iedjzvfdqopfx An Hoif Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen

Condition: good (used), functionality: fully functional, *Description* Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm - *Square bar*: 40 x 40 mm - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Iedpfx Anozt Swlo Hjif Sold with punches. Heavy weight, mounted on a steel base.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN524545, Year of construction: 2016, operating hours: 9,317 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: simplex, construction height: 3,071 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,700 mm Load center distance: 500 mm ISO class: 2 MACHINE DETAILS Mast type: Simplex Drive type: Internal combustion engine Rated power: 38.0 kW Overall height: 3,071 mm Own weight: 4,100 kg EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Iodpfx Anozu Nhqo Hjif Heater Full cab

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Iiedpfjvph Hxex An Hjf

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Iedoyux Egopfx An Heif Gluing unit

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fanuc S-500iB robot, R-J3iB with 7th axis/motor Serial number: R06837005 Year of manufacture: 8/2006 Controller: R-J3iB Number of axes: 6 Max. payload: 15 kg Max. working range: approx. 2757 mm Profibus Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on site. Free loading / ex works. Iisdpfxozmtg Us An Hsf The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address.

Condition: used, functionality: unexamined, Adapter and gluing machine VEA 520 see images Ijdpjzua Izjfx An Hsif untested, price includes loading

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, WE OFFER AN VERY NICE MACHINE, COMING FROM SWITZERLAND FROM THE FIRST OWNER. Manufacturer STAMA-GERMANY Model MC331 S -5 AXIS Year 2005 Condition Used Description WE OFFER AN VERY NICE CONDITION STAMA 5 AXIS MC331 5XIS MACHINE GOT AN NEW SPINDLE IN 2019 ITS READY FO OPERATION Ex. Medical Implant Factory was used for service own production High precision (3 Months Measuring protocol) 5 Axis simultaneous High pressure coolant IKZ 20 Bar Clamping system included Brand STAMA Type: MC331 S Year of build: 2005 Travel x-axis: 700mm Travel y-axis: 400mm Travel z-axis: 360mm Speed till n= 1000rpm Chip conveyor: Yes Coolant pump: Yes -NUMBER OF axis 5 Iedevkyp Iopfx An Hoif Engine power (kW): 21.00kW Electric connection: 400V Total dimension H: 2700mm Total dimension W: 2480mm Total dimension L: 4500mm Machine weight: 7800kg Range A - axis 360000° Range B - axis 360000° Power supply X-axis 10000 mm/min. Feed Y-axis 10000 mm/min. Power supply Z-axis 10000 mm/min. 2x 30 pieces tool

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Isdpfezub Hrex An Hoif Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: used, Year of construction: 2004, functionality: fully functional, On offer: SCM SI 300 S panel saw – with scoring saw, blade up to Ø400 mm The machine is used, has undergone a technical inspection, is in fully working order, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its separately driven and adjustable scoring saw, and the possibility of using a main blade with a diameter of up to 400 mm. Manual adjustment of the blade height and tilt angle allows the machine to be adapted to the cutting task, while the maximum workpiece length of 2700 mm allows for convenient formatting of larger parts. Specifications: • Manufacturer: SCM • Model: SI 300 S • Year of manufacture: 2004 • Main motor power: 4.0 kW • Scoring saw motor power: 0.75 kW • Saw blade speed: 4000 rpm • Scoring saw speed: 8500 rpm • Diameter of the currently installed blade: Ø300 mm • Maximum blade diameter: Ø400 mm • Maximum cutting height with Ø300 mm blade and 90° angle: 85 mm • Maximum cutting height with Ø400 mm blade: 97 mm • Manual blade height adjustment • Manual blade tilt angle adjustment: 90–46° • Scoring saw adjustable manually up/down and side to side • Table length: 1600 mm • Table width: 350 mm • Maximum workpiece length: 2700 mm • Maximum cutting width to fence: 1030 mm • Dust extraction outlets: Ø120 mm and Ø60 mm • Weight: 590 kg • Working table height: 900 mm • Overall dimensions: 240 × 320 × 157 cm (L × W × H, with side trolley and dust extraction hose) Applications: • Formatting of wood-based panels • Cutting solid wood • Trimming parts to a specified dimension • Performing straight and miter cuts • Cutting laminated boards using the scoring saw • Processing parts up to 2700 mm in length • Preparing material for further processing steps Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine. Iijdpfxjzubfhj An Hsf

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle Iodpfx Ajwlfdxen Heif o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.