Used Fischer Xdl-Xymz for sale (219)

Condition: ready for operation (used), Year of construction: 2007, Manual light metal circular saw Metallkraft LMS 400 - Working condition - Year of manufacture: 2007 - Spare saw blade included - Can be tested on-site under power Godpex Tz R Dsfx Adgoub - Shipping via freight company available at extra cost - On-site loading with forklift - Invoice with VAT included

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm Gedpsvri Nmjfx Adgoub - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: new, Year of construction: 2025, Bam house 7x4.5m with suction floor for mineral blasting agents (glass, ceramics, corund, grenade sand our.). Gujdpjd Naafofx Adgeb Magnetic separator, cyclone, treatment, material bunker, Radiant refill, free-beam pressure blower, filter system with cleaning. Lining the walls with 4mm fabric gum. Ceiling flap for crane loading. For questions about technical specifications, etc., please contact us in writing or by phone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert-Georg Fischer-Schiffmann and Seidl-Oliver Fritz GmbH & Co. Kg with the long-time known contacts

Condition: new, Year of construction: 2025, Blast room 12x5m with blasting carriage and flat conveyor floor. Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reprocessing unit, material bunker, blasting media refilling, free jet pressure blower, filter system with self-cleaning. Wall lining with 4mm fabric-reinforced rubber. For questions regarding technical specifications, please contact us in writing or by telephone. The machines have been produced at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts. Gsdpfodhlikjx Adgeub

Condition: new, Year of construction: 2025, Container blasting machine. Gusdpfx Adjdkbvcsgjb 5.89 x 2.35 x 2.69 m Container machines with built-in machine room. Flat funding base, Schneckenförderboden, bucket elevator, treatment, pressure blasting tank 100 l, filter system, extraction soil, opening as a manual blasting cabin. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Images may include optional accessories.

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 1102 S with carriage and turntable. Gjdpodhl Ngsfx Adgsub Width: 1500mm depth: 1235mm height: 995mm Lift door pneumatic. Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Gujdpfx Adjdtq Anogeb Questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Extraction ground, Waffle floor mineral abrasive about 7000x4200mm without grid East surface with suction and collecting boxes For questions about technical specifications, etc. contact us in writing or by telephone. Gsdpfx Ajdz Ayvedgjub Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, Year of construction: 2025, Slingshot wheel type suspension line type 1.15 2T Use Dundy 1000mm Houldn 1500 load 500kg with 2 hours of sling wheels 7.5kW with filter system and suspended dust filter. For questions about technical specifications, etc., please contact us in writing or by phone. Gsdpfx Adedrr U Sjgoub The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert-Georg Fischer-Schiffmann and Seidl-Oliver Fritz GmbH & Co. Kg with the long-time known contacts.

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. Gujdpfefnh Rvox Adgsb If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station Guodpjrnkwrefx Adgob - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: used, TECHNICAL DETAILS - distance between centers : 600 [mm] - center's height : 175 [mm] - table orientation : 11 [°] UNIVERSAL GRINDING WHEEL HOLDER HEADSTOCK - left grinding wheel dimension : 400 x 50 x 127 [mm] - right grinding wheel dimension : 225 x 20 x 76,2 [mm] - motor power : 3 [kW] - spindle speed : 1500 / 1700 / 2200 - grinding-wheel holder headstock orientation : 270 [°] PART HOLDER HEADSTOCK - part-holder headstock orientation : 360 [°] - spindle speeds : 20 - 400 [Rpm] - internal taper : Morse 5 - motor power : 0,9 [kW] Gsdpfsuhbywex Adgsub TAIL STOCK - internal taper : CM4 - quill stroke : 30 [mm] DIMENSIONS - floor surface : 2580 x 1680 [mm] - height : 1670 [mm] - weight : 2200 [kg] EQUIPMENT - FISCHER internal spindle: 14,000 [rpm]

Condition: ready for operation (used), Spine enhancement with NAGEL SP PLUS SQUARE PRESS. Flat, rectangular pressing of the brochure spine by means of a special pressing system. Max. number of sheets per brochure: up to 30 sheets (80 g/m² paper) Max. output (sets/hour): Single pass 1600/hour, double pass 1400/hour Brochure formats min. (mm): 70 x 105 Brochure formats max. (mm): 350 x 250 Power supply (V): 230 Volt Gujdpfx Adsx Ek D Djgeb Shingle delivery / Operating instructions included. Net weight (kg): 100 Gross weight (kg): 120 Please note: Our offers concern used machines, which may show signs of wear (such as minor scratches or yellowing).

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Ceramic measuring plate from Johannes Fischer Aschaffenburg in laboratory quality, 1000x1000mm Flatness less than 1µm (!) Incl. cabinet base with 2 doors Guodpfsix Ahqsx Adgeb Measuring protocol on request for an extra charge

Condition: used, functionality: fully functional, machine/vehicle number: H2X392X0055.., Year of construction: 2020, operating hours: 1,652 h, load capacity: 2,500 kg, lifting height: 4,715 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,154 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift truck Chassis number: H2X392X0055.. Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Good Gedpfx Ajx I Taaedgeub Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, heater, STVZO, full cabin,

Condition: used, functionality: fully functional, machine/vehicle number: H2X393J04292, Year of construction: 2018, operating hours: 7,509 h, load capacity: 3,000 kg, lifting height: 4,650 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, fork length: 2,200 mm, drive type: Diesel, Diesel forklift Chassis number: H2X393J04292 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Solid rubber Front tires condition: 80 - 100% Rear tires type: Solid rubber Gujdjx Ixq Djpfx Adgjb Rear tires condition: 20 - 40% Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, STVZO, full cabin, SE tires, white.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Gedpfx Aed Amifodgoub Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: used, functionality: fully functional, machine/vehicle number: FN5095.., Year of construction: 2016, operating hours: 3,382 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,490 mm, empty load weight: 5,814 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN5095.. Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: JH Battery type: PzS Battery year of construction: 2016 Guedpevxxq Tofx Adgjb Battery condition: 60 - 80% Sideshifter, SE tires black, not white as shown in the pictures! 3rd valve, 4th valve, rear working lights, front working lights, roof cover, front windshield, half-cab, full free lift,

Condition: like new (used), Year of construction: 2024, Pallet rack 5m high, Nedcon, 1,000kg / pallet, approx. 720 storage locations - second-hand - : Guodjttwi Depfx Adgob Price: 21.250.- € (net) incl. delivery within Germany (without islands)! Example configuration - other configurations on request! Price per frame: € 146.50 (net) Price per trusses: 29.-€ Accessories: Price per corner collision protection 90 degrees: € 55 (net) Price per support collision protection: 14.-€ (net) Manufacturer: Nedcon Type: Pallet rack Year of manufacture: current new goods Shelf load: 3.000kg Max. Pallet weight: 1.000kg Max. usable bay load: 9,000kg (other bay loads on request) Frame Quantity: 66 pieces Frame height: 5m (other frame heights up to 7.50m available at short notice) Frame depth: 1.10m Frame bracing: bolted (frames are not delivered pre-assembled) Cross beams Quantity: 360 pieces Clear width: 2.70m (also available in 1.80m and 3.60m) Incl. ground anchor Condition: New Available: Delivery time approx. 2 - 3 weeks Location: INGABE: Project name: Example 5m high User: Alexander von Westernhagen Company: Alexander v. Westernhagen Transport Country: Germany Postal code: 60000 Project area: A Country: DE Width of goods: 800 mm Height of goods: 1250 mm Weight of goods: 1000 kg Pallets per compartment: 3 pallets Pallets per compartment end: 0 pallets Number of levels: 3 levels Total number of bays: 10 bays Number of bays End: 0 bays Number of single rows: 2 row(s) Number of double rows: 2 row(s) RESULT: Shelf load: 3000 kg Bay load: 9000 kg Net bay width: 2700 mm Net bay width end: 2700 mm Distance level to level: 1500 mm Frame height: 5000 mm Frame height end: 5000 mm Frame width: 1100 mm Beam height: 110 mm Number of pallet spaces: 720 units Shelf length: 28100 mm Minimum space requirement: 28300 x 17200 mm MATERIAL LIST: Id PartNo Description Amount Corr. UnitWeight Material 1 50320 Set Frame 1006820 5000x1100 450_2,R5019 54 0 61,37 FRAME 2 50320 Set frame 1006820 5000x1100 450_2,R5019 12 0 61,37 FRAME 3 50340 Set of supports CC1104015A-275 PR2-4HK 2700 360 0 14.54 BEAM 4 50346 Set of spacers NR screwed L200, se 44 0 0.36 ACC 5 57859 Anchor Fischer FAZ II plus M12/ 10 mech 264 0 0.1 ACC

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hang 101-60 oiling machine Electric double oiling machine Can be used for paper, cardboard, plastics or for forgery-proof documents. Gjdpjrmnc Nefx Adgoub For inserting 2 eyelets at a fixed distance of 80 mm, with push-button release Punching and eyeletting in one operation. * Eyelet type 270 * Inner diameter 5 mm // Height: 6.5 mm // Outer diameter: 9.4 mm * Ease 10 - 50 sheets (standard 80 g/sqm copy paper), pre-punching is recommended for more than 25 - 30 sheets * Automatic eyelet feed via magazine * Weight 50kg Very good condition

Condition: like new (used), functionality: fully functional, HANG 101--50 Electric Eyeletting Machine Electric single-head eyeletting machine 101--50 PiccoStar for eyelets No. 269 / 270 Ø 5.0 mm Automatic eyelet feed Suitable for paper, cardboard, plastics, etc. Ideal for contracts and certificates Punches and eyelets in a single operation (the eyelet punches the hole) Continuously adjustable rear and side stops ensure precise alignment Push button for triggering the eyeletting process With self-piercing eyelets: up to 30 sheets at 80 g/m² paper or material thickness up to 3 mm With pre-punched material: up to 50 sheets at 80 g/m² paper or material thickness up to 8 mm Weight: 36 kg / Voltage: 230 Volts / Tools / Operating manual. Guodpfxewvh Alo Adgob The machine is in as-new condition.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 87624-17, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 860 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 20, No reserve price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Travel X-axis: 760 mm Travel Y-axis: 550 mm Travel Z-axis: 300 mm Feed rate X-axis: 30 m/min Godpfjwvi Szox Adgeub Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Table width: 550 mm Table length: 860 mm Table load capacity: 800 kg Spindle speed (max.): 42,000 rpm Spindle type: FISCHER MFW-1230-42 Spindle taper: HSK-E40 Number of tool magazine positions: 20 Tool holder diameter: 40 mm MACHINE DETAILS Serial number: 87624-17 Overall height: 2,800 mm Overall length: 3,400 mm Overall width: 2,300 mm Total weight: 6,500 kg EQUIPMENT - Documentation/manual - Stepless speed control - Tool package

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10901-157, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 860 mm, rotational speed (max.): 42,000 rpm, number of slots in tool magazine: 20, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item on time between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 550 mm Z-axis travel: 300 mm X-axis feed rate: 30 m/min Y-axis feed rate: 30 m/min Z-axis feed rate: 30 m/min Spindle Maximum spindle speed: 42,000 rpm Tool holder: 40 mm Spindle interface: HSK-E40 Working spindle: FISCHER MFW-1230/42 Number of tool magazine slots: 20 Gjdjwvi S Iopfx Adgsub Table Table width: 550 mm Table length: 860 mm Table load capacity: 800 kg MACHINE DETAILS Overall height: 2,900 mm Overall length: 4,200 mm Overall width: 2,600 mm Overall weight: 6,500 kg Voltage/phases/frequency: 400/3/50 V/Ph/Hz Max. current consumption: 6.1 A (50 Hz) Rated power: 3.2 kW (50 Hz) Degree of protection: IP44 EQUIPMENT - Documentation/manual - Continuously variable speed control - Digital AC servo drives with Sercos interface - Precision, preloaded, backlash-free ball screws - 20-position tool changer - Includes tool package

Condition: reconditioned (used), Year of construction: 1998, operating hours: 44,675 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, workpiece weight (max.): 800 kg, table width: 860 mm, table load: 1,500 kg, travel distance W-axis: 635 mm, Equipment: documentation/manual, Fully overhauled and in perfect condition as per original specifications and accuracy. 6 Axis X-Y-Z-C-U 7th axis CNC-rotary table with tailstock in option Control: Fanuc 15 MB Grinding Spindle 60S speed 9,000 to 60,000 rpm Gjdpfx Ajwb Db Uodgsub Hi-Cut system with full enclosure CBN Form rotary dressing with Fischer spindle and Dr. Kaiser diamond wheel This machine is under power and can be seen in our facility in Gals, Switzerland Garantee of 6 months Shipment, installation and training can be provided

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling Guedpfxjuhbxmj Adgeb - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft