Used Fischer Xdl-Xymz for sale (221)

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 450 mm z-travel 300 mm CNC-control Roeders RMS6 table-size 700 x 550 mm max. table load 800 kg spindle turning speed range 42.000 U/min feed stepless 0 - 30.000 mm/min rapid traverse 30 m/min drive capacity - spindle motor 14 kW tool change unit Pick-up 18 Pos. voltage 400 V total power requirement 20 kVA weight of the machine ca. 5,2 t Nljdpfxefff Rfj Akujb dimensions of the machine ca. 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system

Condition: used, functionality: fully functional, machine/vehicle number: FN615268, Year of construction: 2020, operating hours: 2,469 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN615268 Nodow H Eiqspfx Akujlb Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Solid rubber Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: JH Battery type: PzS Battery year: 2023 Battery condition: 80 - 100% Side shifter, integrated lateral lift, front work lights, overhead guard, front windscreen, STVZO, full free lift,

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm Nlodpfeuxft Sox Akusb centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement Nljdpfx Asuxfu Nekueb - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Nljdpfx Aeuxfucjkusb Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: good (used), functionality: fully functional, machine/vehicle number: 3005, Foellmer Motor Perforating Machine 45 ME with creasing and micro-perforation tool (see image) Activation: Electrically via foot switch. Working width: 45 cm / Table size: 60 x 35 cm Performance: Up to 15 sheets (depending on material) Dimensions H x W x D in mm: 1120 x 600 x 1000 Weight: 117 kg Connection: 400 V / Operating manual included. Shipping at buyer's expense possible. Collection possible. Our offers concern used machines, which may show signs of use (minor scratches or yellowing). Nsdpfx Aswu Dvfskujlb

Condition: like new (used), functionality: fully functional, Equipment: compressor, MORGANA Digifold Pro By combining creasing and folding in a single unit, the Digifold Pro becomes a highly productive, user-friendly, and mobile finishing center. Perforating is also possible, further expanding its application range. With speeds of up to 6,000 sheets/hour and a maximum format of up to 900 x 358 mm, the new Digifold Pro offers even greater flexibility. A large touch-screen display makes operating the Digifold Pro and all other Pro Generation machines easier. Versatility The Digifold Pro can be used in three different modes as required: - As a creasing machine - As a folding machine - As an integrated creasing and folding machine, performing both functions in a single pass. Feeder: suction feeder draws paper from below Paper format: max. 900 x 358 mm // min. 210 x 140 mm Paper weight: max. 400 gsm // min. 100 gsm Number of creases per sheet: 9 Max. number of folds per sheet: 2 Number of program memory slots: over 1,000 Min. distance between two creases: 40 mm Min. distance between two folds: 70 mm Min. crease distance from leading edge: 50 mm Min. fold distance from leading edge: 50 mm Min. crease distance from trailing edge: 50 mm Min. fold distance from trailing edge: 50 mm Fold length: 70 mm; Max. fold length up to 450 mm (automatic feed), up to 1,800 mm (manual feed) Njdowndzbjpfx Akuelb Fine adjustment: 0.1 mm increments Max. speed (A4): 6,000 sheets/hour Dimensions (L x W x H): 1,980 x 655 x 1,265 mm Weight: 190 kg Power supply: 230 V Shipping at buyer’s expense. 3-month bring-in warranty. All our offers are for used machines, which may show signs of use (minor scratches or yellowing).

Condition: refurbished (used), functionality: fully functional, overall weight: 600 kg, type of input current: AC, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in very good condition. The PowerSquare is not only versatile, but also extremely easy to operate and produces unbeatable professional brochures. Nsdpsxn Rdaefx Akujlb • Booklet maker for brochures up to 56 sheets / 224 pages at 80 gsm • Heavy-duty wire stitch head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic format adjustment, automatic wire length adjustment • 2 new front edge trimmer blades • 1 - 6 stitches, evenly distributed on the spine. Production of brochures without staples also possible. • Wire from spool: up to 291,500 stitches • Machine has been completely overhauled and operates without defects • Fully automatic machine setup • Immediately operational / production starts from brochure 1 • Test run possible by arrangement • Automatic triggering • 230 Volt / 600 kg • Format range from 120 x 200 mm to 370 x 520 mm Produce unbeatable professional brochures with the PSQ 224. Euro 27,900.00 plus VAT. Shipping / delivery available. Please note our offers refer to used machines, which may show signs of previous use (minor scratches or discoloration). Collection possible, shipping possible, installation and instruction available.

Condition: good (used), Crew container interchangeable body, Nledpfx Aeyxpbbekueb The container is self-sufficient, can be charged, and has power supply. It is insulated. Side door and 2 hinged doors. Dimensions: 600x250x250 cm.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° Nledpeyv A Dkjfx Akujb C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm Nedpey H Ncbjfx Akuelb - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: used, mileage: 768,718 km, power: 368 kW (500.34 HP), first registration: 09/2013, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,000 mm, color: white, gearing type: automatic, suspension: steel-air, Equipment: air conditioning, cruise control, differential lock, navigation system, parking heater, White color, leather seats, pneumatic leaf spring suspension, lift axle, intarder, digital tachograph, fifth wheel coupling: Fischer, electronic brake system (EBS), brake assist, automatic climate control, stationary air conditioning, adaptive cruise control, independent heating/preselection, comfortable front seats, pneumatic front seats, height-adjustable driver’s seat, driver’s armrest, heated front seats, headlamp washer system, radio/CD, Bluetooth mobile phone preparation, parking assistance, leather multifunction steering wheel, front lumbar supports, electric windows, roof spoiler, fog lights, electrically adjustable and heated mirrors, immobilizer, central locking with remote control, rear differential lock, front underrun protection bar, sun visor, spare wheel, fridge box, axle load indicator, hill start assist, LED daytime running lights, 2x7-pin socket connection, telematics system, speed limiter, cab suspension, pneumatic cab suspension, FMS data interface, 7-pin trailer connector, EEV calibration, INDUSTRIAL VEHICLES Iveco Stralis AS440S50 Road Tractor COLOR: WHITE YEAR: 2013-09 KM: 768,718 GVW: 26,000 cc: 12,882 Euro 5 FUEL: DIESEL Njdpfxjyw Av Aj Akuelb

Condition: used, functionality: fully functional, machine/vehicle number: H2120X00.., Year of construction: 2020, operating hours: 1,256 h, load capacity: 3,000 kg, lifting height: 4,980 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork length: 2,200 mm, drive type: Diesel, Diesel Forklift VIN: H2120X00.. Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Nsdpfswlwp Hex Akujlb Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Solid Rubber Rear Tires Condition: 40 - 60% Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Full Cabin

Condition: used, mileage: 680,000 km, power: 375 kW (509.86 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 * Telligent manual transmission with clutch * Tipping hydraulics * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder * Mega cab Nedpfxsyq A Drj Akuelb * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and smokes * Camshaft likely damaged Special equipment: Work lights on rear cab wall (top), audio system: Radio Truckline CC 65 / 70 with cassette deck, 220 Ah battery, comfort cockpit, air horn, movable cab entrance, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, auxiliary drive MB 2C, Voith retarder, low-maintenance fifth wheel, Fischer fifth wheel coupling, circuit breaker, seats in cab: driver's comfort suspension seat incl. horizontal suspension, sun visor, 24V socket in cab, straight front axle, transmission oil cooler Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, electrically adjustable and heated exterior mirrors, wide-angle exterior mirror heated (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf / air, electric window lifters, 80 A alternator, 16-speed transmission, interior filter: pollen filter, body/chassis: tractor unit, fuel tank: 400 litres, engine: 16.0 litre 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3300 mm, fifth wheel coupling: mounting height 150 mm, disc brakes, steel rims 9.00x22.5, cab control, Telligent shifting, Telligent brake system with ABS+ASR, front underrun protection, CB radio pre-installation, telephone/fax pre-installation, immobilizer, central locking incl. key, permissible total weight 26.0 t

Condition: used, Year of construction: 1995, functionality: fully functional, grinding height: 100 mm, grinding length: 3,250 mm, We are offering this used Löffler KSL-100 MG edge sanding machine, year of manufacture 1995. Manufacturer: Löffler Maschinenbau GmbH Langenaltheim / Bavaria Model: KSL-100 MG Serial number: 95.005/6/95 Nljdpfx Akeythu Isueb Year of manufacture: 1995 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Njdpfx Akedrtansujlb

Condition: used, Year of construction: 1995, functionality: fully functional, - CNC Milling Machine Fadal, Model VMC 15XT A CNC vertical machining center by Fadal, model VMC 15XT. Here are some key specifications and features: Manufacturer/Model: Fadal VMC 15XT. Travels (typical for VMC 15XT): approx. (762 × 406 × 508) mm (X/Y/Z). Equipment: Features an automatic tool changer and a spindle designed for precision machining. Origin: The machine was manufactured in the USA. Nledpfeyl I Tuox Akuob - NDM-40 with Siemens SINUMERIK System 6 This machine comes from an industrial environment and is of robust construction. It is equipped with an enclosed work cabin and a tool turret. Ideally suited for metalworking, workshops, training centers, or as a reliable production machine. Features: CNC Control: Siemens SINUMERIK System 6. Tool turret. Enclosed cabin. Emergency stop and full operator panel. Industrial-grade design. Optical condition consistent with age (signs of use present, see photos). - CNC Lathe NDM-25 Technical Data & Features of the Georg Fischer NDM 25 The NDM 25 was designed as a robust machine for precision manufacturing, including applications in the automotive and aerospace industries. Manufacturer: Georg Fischer (+GF+). Machine type: CNC lathe. Control unit: Most commonly equipped with Siemens 820 T control, but other older units such as General Electric or Kongsberg have also been installed or retrofitted. Axes: 2 axes. Turning length: 600 mm. Swing over bed: 400 mm. Turret: 12 positions. Chuck capacity: 250 mm. Equipment: Typically features a tailstock and a chip conveyor. Availability and Maintenance. - CNC Lathe NDM-16 The NDM 16 is a CNC lathe manufactured by the Swiss company Georg Fischer (+GF+) and typically equipped with Siemens controls. Technical Details The Georg Fischer NDM 16 is designed for shaft machining and is frequently used in industrial metalworking environments. Machine type: CNC lathe / turning center Manufacturer: Georg Fischer (+GF+), Switzerland Control: Various CNC controls have been used, including Siemens 840 C or older models such as General Electric Mark Century 1050 HL or Siemens Sinumerik 5 TS. Capacity: Turning diameter up to 250 mm and turning length up to 800 mm, depending on specific machine configuration. RhyMech AG lists specific capacities of 450 mm diameter and 500 mm length (170 x 500). Power: Rated at around 22 kW (30 HP). Tool system: Fitted with a 12-position VDI tool disc. The NDM 16 was produced in the 1990s and is now primarily found on the used machinery market. There are also other machines with similar nomenclature, such as the SCHIESS PENSOTTI NDM 160 vertical lathe, which is, however, a different type of machine. - EXCEL-810 CNC Vertical Machining Center "CNC" stands for Computerized Numerical Control, meaning the machine is computer-controlled. "Vertical" refers to the spindle orientation, which in this case is vertical. These machines are widely used in manufacturing and mechanical engineering for producing complex parts. Fully functional and equipped with a range of different tools. Various tools are also available (see pictures).

Condition: used, functionality: fully functional, machine/vehicle number: FN5624.., Year of construction: 2018, operating hours: 1,250 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN5624.. Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Super elastic Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: JH Battery type: PzS Battery year: 2018 Nlodeylqrgspfx Akusb Battery condition: 60 - 80% Sideshift, fork positioner, third valve, fourth valve, rear work light, front work light, roof cover, front windshield,

Condition: good (used), functionality: fully functional, total width: 500 mm, total length: 7,000 mm, plate height: 600 mm, Granite measuring beam from Johannes Fischer Aschaffenburg Dimensions: 7000x500x600 mm Milled recess in the upper running surface Drill holes on the top Quality grade is still being verified (likely better than grade 0 according to DIN876) Nlsdpfxeym R U Rs Akusb Optional additional machining available at extra cost

Condition: like new (used), functionality: fully functional, total width: 1,000 mm, total length: 4,000 mm, plate height: 400 mm, Granite surface plate by Hahn & Kolb (Johannes Fischer Aschaffenburg) Dimensions: 4000x1000x400 mm Nljdpfx Asym R Tmskujb Surface will be newly finished to grade 00 (or as requested) Optional stand or supporting legs available.

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Nedsu T Rhbopfx Akuelb

Condition: used, mileage: 733,382 km, power: 331 kW (450.03 HP), first registration: 01/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,750 mm, loading space volume: 16 m³, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Scania R 450 B 6x2*4NB Flatbed with Atlas Crane + JIB 190.2E-A4 VIN: 9229185 Chassis / Attachments: Nlsdpfxewyhdqs Akuob * Full air suspension * Lift axle / Steering axle * Wheelbase: 4,750 mm // 1,350 mm * Tires: 1st + 3rd axles 385/65R22.5, 2nd axle 315/80R22.5 * Remaining tire tread: 1st axle ~520/30%, 2nd axle ~30%, 3rd axle ~70/30% * 1 x aluminum diesel tank, 700 L * 1 x AdBlue tank * 1 x hydraulic tank * 5 x PVC toolboxes by Suer * Fixed trailer coupling * Duomat Body: * Fischer special superstructures, Neumalsch * Loading area: 7.00 m x 2.48 m x 0.90 m, approx. 16 m³ * Bulkhead 2.20 m * Perforated outer frame with lashing eyes * Hardwood plywood flooring * Kinnegrip folding side stanchions * Side underrun protection (aluminum) Crane: * Atlas crane 190.2E-A4 * Year: 2017 * JIB * Rear outriggers * Radio remote control * Lifting capacity: 2.0 m = 7,340 kg, 4.6 m = 3,720 kg, 6.5 m = 2,580 kg, 8.4 m = 1,940 kg, 10.4 m = 1,490 kg, 12.4 m = 1,230 kg, 14.4 m = 1,000 kg + JIB Cab / Driver's Cabin: * CR 20 H * Skylights // LED * 1 x sleeper berth * Leather steering wheel * Refrigerator * Automatic climate control * Stationary air conditioning * Auxiliary heating * Scania Infotainment Premium * Aux, USB, BT * Scania AEB = Emergency braking assistant * Scania ACC = Adaptive cruise control * Scania LDW = Lane departure warning Engine / Transmission: * 331 kW / 450 HP // 12,742 cm³ // Euro 6c * Opticruise 2 pedal / automatic * Retarder * Differential lock Weights: * Gross weight: 26,000 kg * Payload: 11,800 kg * Curb weight: 14,200 kg Other: * German vehicle New general inspections, safety checks, or weight downgrades/upgrades are available on request. We're happy to assist in obtaining export/transfer license plates, as well as transporting your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical and printing errors. Subject to alterations, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is of utmost importance to us, we offer our customers an outstanding full-service package and provide a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to assist you with organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/temporary license plates. Handling customs formalities We are happy to assist you in handling customs matters.

Condition: used, mileage: 733,382 km, power: 331 kW (450.03 HP), first registration: 01/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,750 mm, loading space volume: 16 m³, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Scania R 450 B 6x2/4NB Flatbed with Atlas Crane + JIB 190.2E-A4 VIN: 9229185 Chassis / Attachments: * Full air suspension * Lift axle / Steering axle * Wheelbase: 4,750 mm / 1,350 mm * Tires: 1st & 3rd axles: 385/65R22.5, 2nd axle: 315/80R22.5 * Remaining tire tread: 1st ~ 520/30%, 2nd ~30%, 3rd ~70/30% * 1 x Aluminum diesel tank, 700 L * 1 x AdBlue tank Nedpfx Aewyhctokujlb * 1 x Hydraulic tank * 5 x PVC storage boxes by Suer * Fixed trailer coupling * Duomat Body: * Fischer special bodywork by Neumalsch * Loading area: 7.00 m x 2.48 m x 0.90 m – approx. 16 m³ * Front wall height: 2.20 m * Outer frame with lashing rings * Wooden floor, phenolic coated panels * Kinnegrip folding side stanchions * Side underrun protection (ALU) Crane: • Atlas Crane 190.2E-A4 * Year: 2017 * JIB * Rear stabilizers * Radio remote control * Lifting capacity: 2.0 m = 7,340 kg; 4.6 m = 3,720 kg; 6.5 m = 2,580 kg * 8.4 m = 1,940 kg; 10.4 m = 1,490 kg; 12.4 m = 1,230 kg; 14.4 m = 1,000 kg +++ JIB Cab / Driver's Cabin * CR 20 H * Skylights / LED lighting * 1 bed * Leather steering wheel * Refrigerator * Automatic climate control * Standalone air conditioning * Auxiliary heating * Scania Infotainment Premium * Aux, USB, BT * Scania AEB = Emergency Brake Assist * Scania ACC = Adaptive Cruise Control * Scania LDW = Lane Departure Warning Engine / Transmission * 331 kW / 450 HP // 12,742 cm³ // Euro 6c * Opticruise 2 Pedal / Automatic * Retarder * Differential lock Weights * Gross vehicle weight: 26,000 kg * Payload: 11,800 kg * Unladen weight: 14,200 kg Miscellaneous * German vehicle New main inspections / safety checks or weight reductions/increases available upon request. We are happy to assist you in obtaining export/temporary license plates, as well as organizing delivery of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for misprints & errors, changes, prior sale and mistakes excepted!---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person to assist them in buying or selling vehicles. Convince yourself! Our Service for You: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/short-term plates. Handling customs formalities We are happy to assist you in customs procedures.

Condition: good (used), functionality: fully functional, You are bidding on a used paper cutting machine. All functions are operational. IDEAL 4850-95 EP guillotine cutter with automatic clamping and programmable backgauge control. 450 mm cutting length | electro-mechanical blade drive | automatic clamping | electrically driven backgauge with “EP” control module | electronic handwheel with infinitely variable speed for fine manual backgauge adjustment | dual-guided clamp bar, independently controllable from the blade | precision backgauge spindle | adjustable backgauge bar with fine pitch and plastic sliders | two side guides each on the front and rear tables | solid steel blade carrier and adjustable blade guides | complete with stand and paper storage shelf | SCS (Safety Cutting System) with comprehensive safety package: electronically monitored, pivoting safety guard on the front table; transparent safety cover on the rear table; main switch and safety lock with key; two-hand cut activation with repeat cut lock and simultaneous operation control; 24-volt control; patented IDEAL safety drive; automatic retraction of blade and clamp from any position; disc brake for immediate blade stop; blade change device with covered cutting edge; blade depth adjustment accessible from outside; simple front blade replacement without removing housing parts. Power supply: 230 V / 50 Hz / 1 phase, Rated motor output: blade drive 1.1 kW, clamp drive 0.32 kW, carriage drive 0.1 kW, Dimensions (H x W x D): 1230 x 755 x 970 mm, Weight: 215 kg, Colour: pearl grey. Nlsdpjyfpqnsfx Akusb

Condition: used, Year of construction: 1992, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Nlodpeq Tdh Eofx Akujb Flatness of the measuring surfaces < 1µm Slightly damaged corners, measuring surfaces are in order Measurement report on request for an additional charge