Used Fitw Fitness Cube for sale (2,509)

Condition: used, maximum load weight: 12,660 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,720 mm, loading space volume: 49 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2014, Trailer No. G0113129_1 – Manufacturer: Krone. Bodjz A Rqtjpfx Ahmowu * Double-deck system * Simple corner fittings * Contour marking on the side/rear * Load certificate Code-XL * Roll-up rear door (aluminum) * Keyhole system inside * Forklift accessible * Telescopic support legs * System for rail loading * Lashing recesses * Lashing points Double-deck equipment without double-deck load beams (available at an extra charge!). Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Partially painted. Substructure with signs of use, some surface rust. Valid UVV certificate. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change; subject to prior sale. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2023, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,760 mm, Year of construction: 2023, Wagon No. G0115508_1 - Manufacturer: Krone. * Simple corner fittings * Contour markings side/rear * Code XL load certificate * Forklift accessible * Fixed support legs * Rail loading device LASI CODE XL !!!. Multiple units available!. Like-new condition!. Delivery time: IMMEDIATELY. UVV (German accident prevention regulations) applicable. Bwsdpez A Rq Tefx Ahmou Dimensions are approximate. Offer subject to change without notice. Prices are net ex works, D-59302 Oelde. Further details are available by phone or email:

Condition: used, maximum load weight: 12,620 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,240 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, loading space volume: 43 m³, total width: 2,600 mm, total height: 2,900 mm, Year of construction: 2014, Vehicle No. G0119673_1 – Manufacturer: Krone. * Floor: Aluminum floor * Double-deck configuration * Double-deck beams * Simple corner fittings * Rear door design: Rear portal doors Bwsdpfx Ahsz A Rk Hemeu * Outline marking on side/rear * Refrigeration unit * Forklift accessible * Telescopic support legs * Temperature recorder * Locking bars on rear doors: 2 * Lashing points ATP certificate – new. Leak test – new. Double-deck configuration with double-deck loading beams. Financing available upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Krone Telematics Cool W: Location monitoring, door monitoring, cooling temperature monitoring, and refrigeration unit monitoring can be activated at Krone for an additional charge. Delivery time: IMMEDIATELY AVAILABLE. Newly painted. Oil service – new. Solar panel for start-up voltage monitoring – new. Technically ready for use, body and support legs newly painted. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run to -18° C – OK!. Undercarriage (KTL) cleaned and treated with underbody protection. UVV certificate valid. UVV documents available. Interchangeable body newly painted in pure white (RAL 9010). Mobile refrigerated storage. Dimensions are approximate. Offer subject to change, and sale is subject to prior sale. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Year of construction: 2012, condition: excellent (used), Welding and cleaning line in a 90° configuration, running from right to left, consisting of a 4-head welding machine SMK 504, a cooling table, and an automatic cleaning machine EPA 479 with a turning station. Maximum welding size = 3,570 mm x 2,500 mm, currently programmed for Kömmerling 76 AD, 88 MD profiles. CNC cleaning machine with corner and shear hinge drilling device for Siegenia fittings, sealing strip holder, WINDOWS control system on the welding and cleaning machines, and safety fences. Currently set for V-groove processing. Bwjdpfsz Dihyex Ahmeu

Condition: used, mileage: 110,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6 L2 long wheelbase, 4Motion / all-wheel drive with differential lock, 110 kW, with high-quality equipment, ideal for tradespeople. All-wheel drive (4Motion, 4M, 4x4, 4WD) with mechanical differential lock (switchable) Underride protection for engine/transmission made of aluminum Trailer hitch with 2.5 t towing capacity, removable Mounting rails for roof rack Auxiliary heater, air (outlet B-pillar, lower right), programmable Climatic air conditioning with pollen filter Comfort driver and passenger seat with armrests on both sides, foldable, adjustable: - Seat height, backrest, lumbar support Seat cover fabric Simora Driving assistance systems: - PDC Park Distance Control front and rear, optical and acoustic display - Rear view camera - Cruise control - Hill start assist - Fatigue detection Bsdpfx Ahjz Dir Sjmewu - Trailer stabilization - Brake assistant (HBA) - Multi-collision brake - ABS, ASR, ESP Light and Visibility Package - Automatic headlights - Automatic windshield wipers - Automatically dimming interior mirror Audio-navigation system Discover Media (touchscreen color display) - Radio, CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free kit for mobile phone with Bluetooth - Mobile Online Services Car-Net - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Multi-function display Plus / trip computer Airbag package: - Front airbags - Side airbags in the seats - Head airbags in the B-pillar Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control 12 V socket front (2x) Spare wheel and jack Fog lights with cornering light 2nd battery with separation relay Wheelbase 3400 mm Sliding door, cargo area with tinted glass Rear door with tinted glass, heated, with windshield wiper Commercial vehicle registration N1 / van Chassis 17" Engine 2.0 L - 110 kW TDI 6-speed manual transmission Steering wheel adjustable Non-smoker package Handles on A-pillars Heat-insulating glazing Heated windshield washer nozzles Cargo area equipment: Workshop fitting by Aluca (similar to Bott, Sortimo, Würth). Left side: shelving system with long storage compartment, storage compartments, cabinet section and 6 drawers. Right side: shelving system with storage compartments, storage compartment, 4 drawers and 4 aluminum tool/small parts cases. Fold-out workbench. Cargo area partition with window, upholstered in the driver's cabin (noise reduction). Robust wooden floor. Cargo securing with lashing eyes and mounting rails. Ceiling upholstered. Ventilation. LED lighting. Cargo area dimensions: - Length bottom: approx. 282 cm - Length middle: approx. 271 cm - Length top: approx. 261 cm - Height: 134 cm Service history from VW: 02.2021 / 27,787 km oil change 07.2021 / 38,350 km inspection + action S546 crit. 02 12.2022 / 71,422 km Insp. + oil change + Haldex clutch oil change 02.2024 / 97,192 km inspection 03.2025 / 99,112 km inspection + oil change + brake fluid 11.2025 / 112,439 km Haldex clutch oil change + air filter Inspection due Mounted tires: Winter tires 215/65 R 16 on steel rims with approx. 6 mm tread depth front and approx. 8 mm rear Additional tires: Summer tires 205/65 R 16 on steel rims with approx. 4/4/5/5 mm tread depth Despite careful processing, input and data transmission errors may occur in the vehicle description including pictures. Errors and prior sale are reserved. The vehicle can be inspected

Condition: used, mileage: 82,835 km, power: 78 kW (106.05 HP), first registration: 02/2011, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro4, suspension: other, total length: 6,783 mm, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2011, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The Iveco Daily 35 S11 C30C Automatic is a versatile and robust van from 2011 with a mileage of 82,835 km. Equipped with a 2,287 cc diesel engine, it delivers 78 kW (106 hp) and complies with the Euro 4 emissions standard. The vehicle is in used condition, features a yellow paint finish, and is fitted with a green emissions badge (particulate class 4). Key features of this model include an automatic transmission, a summer-day box body, and an integrated shelving system in the cargo area. A reversing camera enhances safety during maneuvering. With a length of 6,783 mm, a width of 2,177 mm, and a height of 2,770 mm, the van offers ample cargo space, and the permissible gross vehicle weight is up to 3,500 kg. The Iveco offers various loading options and can be delivered nationwide across Germany at an additional charge. Viewing is possible at any time without prior appointment. Further details are available upon request. Bwedpfx Ajxppiqohmju Sale exclusively to commercial customers (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2023, 2023 | Ford TRANSIT | Used Commercial Vehicle - Tipper | 43277 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 25100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 39 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: The Ford transit tipper is fitted with adblue ,functioned well during the inspection. Front window screen is cracked and a small bent on the tool locker is present. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39951 Equippo" is commonly used when looking up more details online. Bsdpfx Ahey Rr Sajmswu 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Bwjdpfxozz Shyo Ahmeu Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: used, Year of construction: 1998, voltage 400/50 V/Hz output 13 kw Bedpfxszz S Ndj Ahmowu The Parker Polyflex SMM100 is a specialized hose assembly machine designed for the precise assembly of ultra-high-pressure thermoplastic hose lines. A safety three-jaw chuck ensures stable fixation and reliable force transmission during the pressing-in of fittings. In our estimation, the machine is in good used condition and can be inspectedunder power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Spark trap, spark pre-separator for ventilation ducts, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg Bwodpoz A Thnofx Ahmsu

Condition: like new (used), mileage: 10,854 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,682 mm, overall weight: 3,500 kg, empty load weight: 2,669 kg, maximum load weight: 831 kg, operation weight: 2,669 kg, first registration: 10/2020, next inspection (TÜV): 09/2028, loading space length: 3,733 mm, loading space width: 1,780 mm, loading space height: 1,800 mm, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 8.1 l/100km, fuel consumption (combined): 8.6 l/100km, CO₂ emissions: 224 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2020, total length: 6,290 mm, total width: 2,070 mm, total height: 2,580 mm, fuel: diesel, machine/vehicle number: Master L3 4 x 4, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, all wheel drive, all-season tires, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, immobilizer system, onboard computer, parking heater, power assisted steering, power mirror, sliding door, soot filter, start-stop system, traction control, trailer coupling, truck registration, Master panel van with original 10,000 km, in top condition No rental company – no delivery service – no construction site use All-wheel drive, switchable Gearbox reduction, switchable Euro 6 emission standard – green particulate matter sticker Engine: 2.3 dCI – 96 kW / 131 hp Wheelbase L3: 3682 mm AD BLUE technology ECO function for fuel-efficient driving Air conditioning Auxiliary heater with timer Cruise control Rear view camera ABS – Anti-lock braking system ESP – Electronic stability program ASR – Anti-slip control Brake assist Hill start assist 3 x seats in fabric – double passenger seat with folding table Driver’s seat with height adjustment, armrest, and lumbar support Airbag for driver + passenger Central locking with remote control Electric windows Electrically adjustable and heated exterior mirrors Side marker lights Steering column, height adjustable On-board computer Outside temperature display Gear shift indicator Radio with USB / MP3 / AUX Bluetooth hands-free system LED daytime running lights Heat-insulating glazing Storage compartment above the windshield Storage compartment on the dashboard Power steering 6-speed manual transmission Rear step bumper Cargo area partition with window LED cargo area lighting Full-height cargo area cladding Wooden cargo floor with lashing eyes for securing the load Vehicle overall length: 6290 mm Vehicle height: 2580 mm Cargo area dimensions: 3733 mm long, 1780 mm wide, 1800 mm high Permissible total weight: 3500 kg Payload: 831 kg Trailer hitch can be retrofitted for a towing capacity of up to 3500 kg Vehicle is fitted with very good all-season tires, approximately 90% tread remaining Complete service history, maintenance recently performed MOT and emissions test new Very clean German vehicle in like-new condition, from first owner Truck net price: €29,900 Errors and omissions, subject to prior sale Bodpsz Dkpfefx Ahmswu We also offer affordable financing options and warranties up to 24 months, even for commercial users. Commercial vehicles at nutzfahrzeuge-heppenheim.de Email: info-at-nutzfahrzeuge-heppenheim.de

Condition: used, maximum load weight: 13,020 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 74,550 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2016, Vehicle No. G0123012 - Manufacturer: Krone. * Simple corner fittings * Contour marking on side/rear * Load certificate Code-XL * Roll-up rear door (aluminum) * Keyhole system inside * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points Financing possible. Delivery time: AVAILABLE IMMEDIATELY. Technically ready for operation without further repairs. Partially painted. Substructure (KTL) coating with signs of wear. Valid UVV certification. UVV documents available. LASI CODE XL!!! Bjdpfxoz Dmzwe Ahmswu Dimensions are approximate. Offer subject to change, intermediate sale reserved. Prices are net prices ex works D-59302 Oelde. Further details available upon request via telephone or email.

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction Bwsdpfxjz Df Txj Ahmeu - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, mileage: 467,100 km, power: 260 kW (353.50 HP), first registration: 01/2016, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1168 * S 516 MD * Final price – price for pick-up * Retarder * French inspection certificate available. * Currently fitted with 58 seats (no reclining seats) --> therefore, seats can be added * Additional row of seats included, resulting in 60 seats * The following repairs were carried out at EVOBUS in June 2026: * Retarder replaced * Retarder control unit replaced * Exhaust gas recirculation valve replaced * Haldex separator replaced * 2 x V-belts replaced * Air tank with drain replaced * Oil separator replaced * Cost: EUR 8,500 / net * In July 2026: Air conditioning service * Side matrix (without control unit) * Interior route display * Seats adjustable in reverse * LIFT * Lifting mechanism - trunk lid on the right side * Storage compartments * Convector heater * Auxiliary heater * Air conditioning * Rear entrance * No toilet, no refrigerator * Wheelchair-accessible bus * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / mileage and condition may vary * All information without guarantee * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions. Bedpfx Ajxwr Apohmewu

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,600 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter Bwjdpfx Ajx D Dx Ajhmsu • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe Bwedpswbd Ibefx Ahmeu -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Bjdez Ari Topfx Ahmewu Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Bwjdpfod Ih Hqex Ahmeu Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Condition: used, mileage: 236,320 km, power: 120 kW (163.15 HP), first registration: 11/2012, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 09/2027, color: black, gearing type: automatic, emission class: euro5, number of seats: 5, total length: 5,008 mm, total width: 1,906 mm, total height: 1,902 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, No. 83 - You can find this and many other Mercedes-Benz vans on our website: ----Mercedes-Benz Vito 116 cdi Comfort Mixto, Euro 5, long-wheelbase version with 5 seats, stylish in obsidian black metallic with painted front and rear bumpers (factory-fitted). The vehicle comes from a single owner (!). MOT/emissions test valid until 09/2027. As a EURO 5 "facelift" model, it already features the robust OM651 engine.----Known defects: The air conditioning and auxiliary heater are not functioning.----Several extras that are rare for this model series make the Vito a special vehicle: automatic transmission, air conditioning, auxiliary heater, tow hitch with a towing capacity of 2500 kg, Comfort Mixto package, Topload package, leather steering wheel, cruise control, passenger airbag, comfort suspension, front and rear parking sensors, painted front and rear bumpers, two-way speakers front and rear, soft-touch dashboard, reading lights in the rear, metallic paint, roof rails, center console with storage compartment, seat heating, (...).----Truck registration All-weather tires Permissible total weight: 2800 kg Unladen weight: approx. 2100 kg Payload: approx. 700 kg Towing capacity: 2500 kg Emission standard: EURO 5 Wheelbase: 3200 mm VIN: WDF63960313769423 Bedpozv Dfgefx Ahmjwu 2 keys ----* Mercedes-Benz Vito 116 cdi Mixto, long-wheelbase version, EURO 5 * 1st owner, MOT valid until 10/2026, recent oil service * 5 seats * Tow hitch with 2.5t towing capacity * Painted front and rear bumpers * Auxiliary heater * Air conditioning * Comfort Mixto package * Topload package * Audio system Audio 20 (radio with CD player) * Driver's seat comfort, passenger seat comfort * Soft-touch dashboard * Reading lights in the rear * Metallic paint * Center console with storage compartment * Seat heating * Front and rear parking sensors * Comfort suspension * Exterior mirrors, electrically adjustable and heated * Airbag for driver and passenger * Two-way speakers front and rear * Electric windows * Central locking * and more ----Errors, changes and prior sale reserved Special equipment: Airbag for passenger side, towing capacity 2500 kg, audio system Audio 20 (radio with CD player), equipment package: Top Load, AUX-IN connection, exterior mirrors, electrically adjustable and heated, both, BlueEfficiency package, start/stop system for engine, soft-touch dashboard, windows for rear doors / tailgate with wiper / washer system, windows in cargo / passenger compartment: - tilting, rear left / right, rear door (opening angle 180 degrees), outside temperature display, comfort package 2, seats in the driver's cab: driver's seat comfort, seats in the driver's cab: passenger seat comfort, sun visors with mirror (illuminated), steering wheel with multifunction including trip computer, reading lights in the rear, roof control unit with reading spot driver / passenger side, interior rearview mirror, metallic paint, center console with storage compartment, parking assistance system (PTS), tires 205/65 R16C 103/101 T, seat belt system with warning device (driver / passenger side), seats in the driver's cab: passenger seat heated, seats in the driver's cab: driver's seat heated, seats in the cargo / passenger compartment: 1st row, 3-seater bench, folding seat on the outside, socket (12V connection) in the cargo / passenger compartment, rear window tinted / black glass, fleece battery 95 Ah, heat-insulating glazing (windshield with band filter at the top), auxiliary heater, additional heater (hot water),

Condition: used, mileage: 189,000 km, power: 96 kW (130.52 HP), first registration: 03/2017, fuel type: diesel, overall weight: 3,100 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now on WhatsApp: Quick and easy contact with our sales advisor. Attention! Sale preferably to business customers. Internal ID number: [3301] ----Optional extras available: * 12 to 64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available even without down payment * Trailer hitch/reversing camera retrofittable on request * Spring offer: Increase of towing capacity up to 3,500 kg for only €999 surcharge upon request (vehicle and manufacturer dependent) ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Immediately operational Bwjdpfx Ahszl N Dasmsu * Euro 6 emissions standard * Long wheelbase * Mixto double cab with 6 seats * Sortimo shelving system fitted in the load compartment * Trailer hitch: 2,800 kg * Air conditioning * Cruise control * Comfort seat * Bluetooth multimedia function * Reversing camera Special equipment: Fixed window in the right sliding door, vehicle without vinyl flooring in the load/passenger compartment, B-pillar grab handle, rear wing doors with glazing (opening angle 180°), body/construction: box van double cab standard Further equipment: Driver airbag, traction control (ASR), electric & heated exterior mirrors, integrated indicator in exterior mirror, on-board computer, electronic brakeforce distribution (EBD), assistance system: hill-start assist, assistance system: crosswind assist, pollen filter, body/construction: box van standard, body variant: standard roof, high load compartment partition behind driver and front passenger, windowless with lower through-loading facility, steering column (steering wheel) adjustable for height and reach, approved as truck, engine 2.0L - 96 kW TDCi CAT, front and rear park assist system, radio preparation, 4 speakers, wheelbase 3300 mm, full wheel covers, spare wheel with normal tire, low-emission according to Euro 6, gear lever in leather, H4 headlights, right-side sliding door for load/passenger compartment, mud flaps front and rear, side protective strips, seat package 25: driver's seat (4-way adjustable) - front passenger double seat - in velour, seats in load/passenger compartment: 1st row, double-tippable, bumpers in body colour, Trend, tinted glass, partial trim in load/passenger compartment, lashing rails on side walls in cargo area. ----Interested in leasing or financing? We offer attractive terms – also possible without down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and for general vehicle description only. Errors, typos, and prior sale excepted. The binding condition of the vehicle is determined exclusively by the local purchase contract or written assurances. Vehicles with mileage over 50,000 km or older than 3 years are preferably sold to business customers.

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Bedsuqk Azopfx Ahmswu 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Technical Specification Bwjdpfx Ahez D Tdxjmju Taper Size SK 40

Condition: used, mileage: 199,526 km, power: 260 kW (353.50 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 15,040 kg, maximum load weight: 10,960 kg, overall weight: 26,000 kg, fuel: diesel, color: orange, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, total length: 9,600 mm, Year of construction: 2016, construction height: 3,500 mm, Equipment: ABS, air conditioning, For sale is a Mercedes-Benz Econic 2635 NGE-L62N equipped with a Zöller Medium X2 evo body. The vehicle was first registered in July 2016 and has a mileage of 199,526 km. It is in well-maintained and operational condition. The truck is powered by a diesel engine with a displacement of 7,698 cc and an output of 260 kW and is fitted with an automatic transmission, providing comfortable and efficient driving. Bwsdpfoygyfrjx Ahmsu Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: Bwodpou Id Awofx Ahmou - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: used, Technical details: grinding table: inclination: nein Grad voltage: 220 V Bjdpfsu Ng Sqsx Ahmowu machine weight approx.: 44 kg space requirements of the machine approx.: 0,3 x 0,45 x 1,1 m Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch *