Used Flender Zf20-090Sp/2U for sale (210)

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Lhedpfx Aieykn T Eoqel Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Lhsdpoyh Na Eefx Aiqjl

Condition: excellent (used), Year of construction: 2000, An inclined conveyor with steel hinge plates. Last loaded with a wheel loader and a dump truck. Overall length: 9.6 m Size of the feed hopper: 8.0 x 3.6 m Width of the conveyor at the bottom: 1.85 m Maximum width with drive: 3.2 m Width of the conveyor belt: 1.3 m Overall height: 5.3 m Lhjdpfx Aoiwxmboiqel Belt speed: 0.05 - 0.29 m/min Conveyor chain: FV 315 with bushing and idler roller Throughput: 3 to 14 m³/hour Gear motor, belt, SEW: 0.75 kW Speed: 0.2 rpm Torque: 18000 Nm Speed of the winding shaft: 64 rpm Gear motor, winding drum, Flender: 7.5 kW Total weight: approx. 20 tons A cover belt conveyor / steep conveyor is also available.

Condition: used, Used Lödige model FKM 1600D stainless steel ploughshare mixer. 1600 litre total capacity and 550-1100 litre working capacity. Ploughshare mixing blades direct driven by 21-35 kW 400 volt 3/50 740-1479 rpm motor through Flender type 185 102 025-2-1 gearbox rated 31kW with 1500rpm input and 115rpm output. Unit has (2) MK 30/55 choppers with air purged seals driven by 5.5kw motors. Has (2) side inspection doors and pneumatically operated drop door discharge. Lsdozn Nmyopfx Aiqohl

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Ljdszulh Topfx Aiqjhl Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board Lhedpfxjh Eydus Aiqjl optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: driven -Drive motor: Flender Himmel 0.37 kW with variable gearbox -Speed: 3.75 to 70.2 m/min -Roller width: 140 mm Lhsdpfxozq Aa Ss Aiqel -Roller diameter: 50 mm -Axle spacing: 140 mm -Conveyor length: approx. 4400 mm -Base: height adjustable -Dimensions: 4480/360/H1045 mm -Weight: 131 kg

Condition: used, Year of construction: 1994, functionality: fully functional, Item: AS-10177 - Alfa Laval Decanter For sale: Used, 5x Alfa Laval Decanter Centrifuges NX 418 S-31G (Year 1994) with Valve & Piping Units Manufacturer: Alfa Laval Separation A/S (Søborg, Denmark) Alfa Laval Decanter Centrifuge – Type NX 418S-31HS High-quality Alfa Laval decanter centrifuge, manufactured in Denmark. Lhjdpexqga Asfx Aiqol Complete unit with Flender / ATB Loher 37 kW main drive motor, electrical control cabinet, stainless steel frame, and integrated piping system. The unit is in very clean condition and was previously used in food processing. Technical details: Manufacturer: Alfa Laval Separation A/S, Denmark Type: NX 418S-31HS Material: Stainless steel Main motor: Flender / ATB Loher 37 kW, 1470 rpm, 380 V, IP55 Drive type: Belt-driven main motor Mounting: Stainless steel base frame Control system: Electrical panels and valve system included Condition: Used, in very good working condition Performance / Capacity: Dairy / whey / milk solids: 5,000 – 10,000 L/h Food / beverage (juice, yeast, starch): 6,000 – 12,000 L/h Industrial / sludge applications: 3 – 8 m³/h (depending on solids content) Bowl diameter: 418 mm Bowl speed: up to approx. 4,000 rpm Max G-force: approx. 4,000 × g Applications: Ideal for dairy, food, beverage, starch, chemical, and industrial wastewater separation processes. Location: Denmark Price: On request Package Options: Available as a complete line (3 x decanters + 3 x valve sections) Or sold individually with matching valve section Location: Stored in Denmark, ready for loading. Export documentation and transport arrangements can be provided.

Condition: used, Year of construction: 1999, operating hours: 105,000 h, functionality: fully functional, overall weight: 741 kg, total length: 1,940 mm, total width: 870 mm, total height: 1,300 mm, volume flow: 425 m³/h, operating pressure: 1 bar, final pressure: 1 bar, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 970 rpm, protection type (IP code): IP55, KSB KWP K 200-320 Pump Set, 18.5 kW – Complete Set, Documented 8 × KSB Centrifugal Pump KWP K 200-320 – Complete Industrial Unit, incl. Drive For sale are 8 identical, well-maintained industrial pump units from the renowned KSB KWP K 200-320 series. The units originate from a special order (KSB Pegnitz, order from 1999/2000) and were accepted and tested according to DIN 1944/III with customer acceptance. Sale of used KSB pump units (year of manufacture 1999, relatively low operating time of approx. 105,000 hours per unit) in as-is condition, without warranty or guarantee. Units have been dismantled; functional tests are possible upon request (without assurance of characteristics). Reference operation with identical units available. Sale preferably in packages; further units potentially available in the future (11 additional units). Spare parts and service obligations are excluded! Pump – KSB KWP K 200-320 Manufacturer KSB Aktiengesellschaft, Pegnitz Type / Series KWP K 200-320 (Impeller pump, radially split volute casing pump) Works No. 5-N01-541905 (Serial numbers on request) Flow rate Q 425 m³/h (118 l/s) Head H 10.25 m Min. Flow Rate 89.9 m³/h Speed 970 rpm (constant) Pump power 14.7 kW Motor power 18.5 kW Efficiency 80.8% NPSH 2.20 m Ljdpszp U Tujfx Aiqehl Operating pressure max. 10 bar Suction nozzle DN 200, axial Discharge nozzle DN 200, upwards Flange DIN 2532 PN 10 Impeller diameter 320 mm (Re-machining form A15, 3-blade) Bearing carrier P05AX Shaft seal Tandem-GLRD (non-pressurized quench), Type 4K M3 Materials Pump casing / Pressure cover / Impeller 9.4460 (stainless, abrasion-resistant) Shaft sleeve 1.4539 GLRD cover 1.4571 Shaft C 45 N Base plate GG (gray cast iron) Drive & Peripherals per Unit Electric motor VEM, IP55, IEC size 200L, 18.5 kW, 970 rpm, B3, 50 Hz, 400/690 V, Insulation F, 3 PT100 sensors Coupling Flender Eupex N-H / Size 140, Intermediate sleeve 180 mm Base plate ZN 24259-G-ISO, Size 9G, GG, 4×M24×320 stud bolts Quench tank incl. piping 1.4571, without fittings Coupling guard Steel Weights per Unit Pump 350 kg Motor 175 kg Base plate 200 kg Coupling + guard 16 kg Total 741 kg Available Documentation (per unit) • Acceptance / Test report of the initial commissioning EN 10204 / DIN 1944 Class III (5 measuring points) • Q-H curves (Curve No. K 95231) • Installation plan / Dimension table with nozzle connections • Installation drawing of the mechanical seal (Drawing No. 0W244223) • Piping plan quench tank • Operating and maintenance instructions Application area / Application notes The KWP K series is a proven process centrifugal pump for: • Wastewater treatment and sewage treatment plant process technology • Biogas plants and fermentation substrate conveying • Sugar factories, paper mills, food production • Biotechnological processes (algae suspensions, fermentation) • Cooling water circuits and process water conveying in the chemical industry Further important (sales) information can be found in the attached documents.

Condition: ready for operation (used), 15 electric motors from various manufacturers are offered. 1) 2 × SEW-Eurodrive R73 DT90L-4, power: 1.5kW. 2) Eurodrive AB R60 DT80K4/2B, power: 0.4/0.63kW. 3) Elektrim SF90S4, power: 1.1kW, weight: 125kg. 4) AEG. 5) Carl Bockwoldt CD2-71N/4D, power: 0.37kW. 6) K. W. Müller RD0KL 44U/max110KP, power: 0.09kW. 7) EMC Eldro ED30/5. 8) ZET DR 1.5/4-90L, power: 1.5kW. 9) Eberhard Bauer D143/146K. 10) Groschopp DM80-60, power: 4kW. 11) Flender Himmel SP0-G63/L, power: 0.18kW. 12) BBC QU X160 M2 BG, power: 15kW. 13) ATB Antriebstechnik A160L/4E-21, power: 15kW. 14) Georgii-Kobold KLB424V, power: 0.10kW. Inspection is possible by prior arrangement. Lhedpfezp U Tzox Aiqsl

Condition: used, functionality: fully functional, Year of construction: 1992, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Notching machine Boschert LB12 Super Machine color: Reseda green RAL 6011 Cutting angle: 90° Cutting capacity: 4 mm St42 steel Lhedpfx Aowfymzoiqel 3 mm stainless steel Connected power: 4 kW Weight: 850 kg Machine equipped with an extra-large machine table with double T-slots parallel to the blade, as well as an additional T-slot at the front of the table, at a 45° angle to the blade 2 stops with a sliding stop bar, 500 mm Internal stop for cutting strips up to 225 mm Plexiglass guard Drive via Flender gearbox-brake motor Used machine, fully functional, in very good condition

Condition: ready for operation (used), Year of construction: 2001, overall weight: 3,000 kg, Disc screen machine, screen length: approx. 2600 mm, screen width: approx. 910 mm, Ledpezmav Nsfx Aiqohl disc spacing: approx. 170 mm, (offset by approx. 85 mm), axle distance: approx. 50-60 mm Overall length: 3450 mm, overall width: 1500 mm, height: 2400 mm, weight: approx. 2500 kg, FLENDER gearbox, 6 axle bearings on the drive side are brand new, Used machine in good, operational condition, No nameplate available.

Condition: used, “Removed from a production facility of an automotive supplier, professionally disassembled.” Quantity: 5 available Device designation: APC Smart-UPS 750VA LCD RM 2U 230V Article number: SMT750RMI2UC Ljdszlubkopfx Aiqjhl Device type: Line-Interactive UPS (Rackmount) Power: 750 VA / 500 Watts Input voltage: 230 V nominal, voltage range 160–286 V Output connections: 4x IEC C13 Output voltage: 230 V Topology: Line-Interactive with automatic voltage regulation (AVR) Battery technology: VRLA, maintenance-free Bridging time at 250 W load: approx. 13 minutes Bridging time at 500 W load (full load): approx. 4 minutes Charging time: approx. 3 hours to 90% Display: LCD display with status indication and control Form factor: Rackmount 2U, tower configuration also possible Dimensions (H x W x D): 89 mm x 432 mm x 406 mm Weight: approx. 20.9 kg Interfaces: USB, Serial, SmartSlot Management software: PowerChute Business Edition Communication: Supports SNMP network cards

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Lodozl Slyspfx Aiqehl Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Condition: used, Electric motor, three-phase motor -Manufacturer: ATB-Loher Flender, electric motor 63 7803785F 015 -Type: AF63/4A-7 -Power: 0.12 KW -Speed: 1390 rpm -Shaft: Ø 11 x 25 mm -Design: B3/B14 -Protection class: IP54 -Quantity: 2x motor available -Price per piece -Dimensions: 210/155/130 mm -Weight: 3.8 kg/pc. Lodperbm Trefx Aiqjhl

Condition: used, Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 Ljdpsl Ab Enofx Aiqehl -Motor: Gansow type 11500 1000 W 24 V -Transmission: Flender ZF 12 -Dimensions: 660/260/H150 mm -Weight: 43 kg

Condition: used, Elevator motor, gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer motor Flender type: LUGA-160LQ-04Y -Manufacturer gearbox Wittur type: SRP3100 -Power: 25 kW -Speed: 59.4 rpm -Construction: B3 -Diameter shaft: Ø mm -Protection class: IP 54 -Brake -Number: 2x motors available Ledpfx Aijctvqaeqehl -Price: per piece -Dimensions: 1060/660/H830 mm -Weight: 668 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Lhsdexyungspfx Aiqol Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch enclosure Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4kW Mounting: Rack 19" Output voltage resolution: 1.2mV Output current resolution: 28.8mA Voltage ripple and noise (regulated): ≤8Vrms, ≤60Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Dimensions (width x height x depth): 423x43.6x432.8mm Parameter display: 4 digits Software: LabVIEW Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Lodpfx Aiszg Exvsqshl

Condition: excellent (used), For sale: a Rietschle VFT 40 (111) vacuum pump, manufactured by a reputable German company. This unit is designed for industrial applications requiring vacuum generation, including packaging machines, printing machines, woodworking machines, CNC machines, and vacuum-based transport systems. The pump is equipped with a three-phase Flender ATB-Loher motor with a power of 1.5 kW and is mounted on a robust mounting plate. Technical specifications: Manufacturer: Rietschle Model: VFT 40 (111) Year of manufacture: 1996 Country of manufacture: Germany Type: vacuum pump Performance: 40 m³/h (50 Hz) 48 m³/h (60 Hz) Maximum vacuum (ultimate pressure): 150 mbar (abs) Motor power: 1.5 kW (50 Hz) / 1.8 kW (60 Hz) Rotational speed: 1420 rpm (50 Hz) 1680 rpm (60 Hz) Power supply: 3×400 V Motor protection class: IP54 Serial number: 1749048 Condition: Ljdpfx Aioziw N Seqohl Used. Visual condition is consistent with the photos. Robust construction, ready for further operation.

Condition: used, Year of construction: 1999, Technical details: x-axis: 800 mm y-axis: 500 mm z-axis: 510 mm control: Siemens 840D number of spindle speeds: 36 - 10000 U/min. tool changer with: 42 tools tool clamping: 12000 N tool taper: SK40 max. torque on the spindle: 102 Nm feed continuous: X/Y/Z: min./max.: 1/10000 / 1/10000 / 1-10000 mm Lsdpju Id Rbofx Aiqohl rapid traverse: X/Y/Z: 40/40/40 m/min voltage: 400 / 50 V / Hz total power requirement: 70 kW HIGH PERFORMANCE DRIVING COLUMN - MACHINING CENTER Coolant system with paper band conveyor chip conveyor make Flender MC535/x=800 hydraulic aggregate make HAWE Loading system Promo cutting values: max. milling capacity=400mm max. drilling Ø 50mm max. thread Ø M30 1 motor each for main spindle 1 + 2: make Kessler; 21 kW; speed 15.000 rpm. 1 motor each for X / Y / and Z-axis: Make Siemens; for X/Y axis 14.0 Nm and Z axis 17.6 Nm torque; speed 3000 rpm. *

Condition: used, This listing is for One Agilent Keysight E36103ADC Power Supply (More Available) These unit is are all in full working condition and is ready for immediate use Overview: Keysight E36103 Model: E36103 DC Power Supply Output: 20 V, 2 A, 40 W Successor to the older E36103A, which is now obsolete Ledpfoxhfckex Aiqshl Key Features: High programming accuracy: Voltage: ±(0.05% + 7 mV) Current: ±(0.05% + 1 mA) Ripple & noise: Voltage: 0.8 mV rms, 15 mV peak-to-peak Current: ~1 mA rms Keysight Technologies Readback accuracy: Voltage: ±(0.05% + 5 mV) Current: ±(0.05% + 1 mA) Keysight Technologies Compact form factor: 2U ¼‑rack width, compact bench size with 3.7 kg weight Farnell UK Display & controls: High-contrast OLED screen visible from various angles Intuitive rotary knob and front-panel interface for quick digit‑by‑digit adjustments Connectivity: USB and LAN (LXI Core) Supports BenchVue for intuitive control, data logging, and automation Protection features: Overvoltage, overcurrent, and overtemperature safeguards included

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load. Lhjdpoxv D Hqofx Aiqjl

Condition: used, This listing is for a APC SURT1000XLI Smart-UPS. The unit is in full working condition and is ready for immediate release. The APC SURT1000XLI Smart-UPS is an advanced uninterruptible power supply (UPS) designed to safeguard your critical electronic devices from power outages and voltage fluctuations. Engineered for reliability and efficiency, this UPS ensures that your systems remain operational during unexpected power interruptions, providing peace of mind for both home and office environments. Key Features: Reliable Battery Protection: Equipped with the RBC31 battery, the SURT1000XLI features a sealed lead acid, valve-regulated (VRLA) AGM battery that requires no maintenance. The battery boasts a lifespan of 5 to 10 years, ensuring long-lasting performance. Efficient Power Specifications: The Smart-UPS RT 1000 provides a robust 700W output power with an input voltage of 230V, making it suitable for a range of electronic devices, including servers, networking equipment, and other critical components. Physical Specifications: Compact Design: The UPS features a 2U case size and measures 432 x 85 x 483 mm, allowing it to fit into standard racks with ease. Lodpoxxyddofx Aiqehl Weight: Weighing 29 kg, the robust design ensures stability and reliability in demanding environments. Socket Configuration: Includes 6x IEC 320 C13 sockets and 2x IEC Jumpers, offering ample connectivity for multiple devices.

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load. Lhodpfx Aexv Dyweiqjl