Used Floor Drip Pans for sale (10,884)

Condition: used, maximum load weight: 28,020 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2015, next inspection (TÜV): 07/2026, Equipment: ABS, * Knapen 3-axle, push-floor semi-trailer, type K200, approx. 100 m³ * BPW axles * Air suspension * Leveling system * Drum brakes Knjdpfozgq Ngex Andoa * Platform * Roll-over tarp * EBS * ABS * First owner * Valid inspection until 07/26 Unladen weight 7980 kg

Condition: reconditioned (used), Year of construction: 2017, operating hours: 683 h, functionality: fully functional, working width: 850 mm, area performance: 5,000 m²/h, overall weight: 620 kg, warranty duration: 12 months, battery voltage: 120 V, gradeability: 11 %, NUMATIC TTV 678G/400T SCRUBBER NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) 2017 production year 850mm cleaning head equipped with three new medium-hardness disc brushes, allowing work on any surface. New squeegee and new polyurethane compression rubbers, resistant to contact with oil liquids, greases and petroleum derivatives. Built-in battery charger makes everyday use easier New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 850 Suction width (mm): 1100 Theoretical efficiency (m²/h): 5000 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 3 Brush speed (1/min): 220 Weight without batteries (kg): 315 Total weight, ready to work (kg): 620 Gradeability (%): 11 Kedpfx Aowprt Ijndena DIMENSIONS: Length with squeegee (mm) 1676 Height (mm) 1425 Width with squeegee (mm) 1100 Width without squeegee (mm) 1054 INCLUDED: NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) NEW SQUEEGEE WITH NEW, OIL-RESISTANT RUBBERS NEW 24V 700W suction turbine NEW 300mm PPL 0.6 disc brushes (x3) NEW drain hose NEW suction hose NEW head protection rubbers (x2) Built-in battery charger Tenzi Normal 5L fluid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (850mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 461 h, functionality: fully functional, working width: 850 mm, area performance: 5,000 m²/h, overall weight: 606 kg, warranty duration: 12 months, water tank capacity: 120 l, gradeability: 11 %, NUMATIC TTV 678G/400T SCRUBBER NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) 2017 year of manufacture and 461 hours of operation 850mm cleaning head equipped with three new medium-hardness disc brushes, allowing work on any surface. New squeegee and new polyurethane compression rubbers, resistant to contact with oil liquids, grease and petroleum derivatives. Built-in battery charger makes everyday use easier Knjdpfxjwpr Huo Andoa New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable suction hose The new suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 5000 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 3 Brush speed (1/min): 220 Weight without batteries (kg): 315 Total weight, ready for work (kg): 620 Gradeability (%): 11 DIMENSIONS: Length with squeegee (mm) 1676 Height (mm) 1425 Width with squeegee (mm) 1100 Width without squeegee (mm) 1054 INCLUDED: NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) NEW SQUEEGEE WITH NEW, OIL-RESISTANT RUBBERS NEW 24V 700W suction turbine NEW 300mm PPL 0.6 disc brushes (x3) NEW suction hose NEW head protective rubbers (x2) Built-in battery charger Tenzi Normal 5L fluid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (850mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,860 mm, loading space width: 2,550 mm, loading space height: 4,000 mm, loading space volume: 91 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 9,010 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Rear doors - Air suspension - Disc brakes - Sliding roof = Notes = 2008 SYSTEM TRAILER curtainsider semi-trailer with ABS/EBS, BPW Eco-Plus axles with disc brakes, hardwood floor, 3 supports per side with curtain retainers, sliding roof, rear doors, tires 385/65-R22.5 (tread depth left: 5/7/7 mm; tread depth right: 9/5/8 mm), unladen weight: 6,735 kg, permissible total weight: 39,000 kg, Dutch registration with valid main inspection (APK) until: 10/23/2026 = Additional Information = Axle configuration Ksdpfx Aezfp Apsndsna Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; tire tread depth left: 30%; tire tread depth right: 55% Rear axle 2: Max. axle load: 9,000 kg; tire tread depth left: 45%; tire tread depth right: 30% Rear axle 3: Max. axle load: 9,000 kg; tire tread depth left: 45%; tire tread depth right: 50% Weights Unladen weight: 6,735 kg Payload: 32,265 kg GVW: 39,000 kg Functional Body brand: SYSTEM TRAILER PRS 27 Maintenance, History and Condition APK (Technical Main Inspection): valid until 10/2026 Technical condition: very good Optical condition: average Identification License plate: OL-97-SK Additional Information Please contact Arne Honingh for further information.

Condition: used, axle configuration: 2 axles, first registration: 04/2004, color: other, Year of construction: 2004, Carrying capacity: 14.160 kg Knodpfx Aoy Edxhendsa

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2019, total length: 14,040 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,050 mm, color: grey, Year of construction: 2019, Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear Axle 3: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,300 kg Payload: 34,700 kg GVW: 42,000 kg Maintenance APK (Technical Inspection): valid until 01/2027 Identification License plate: OX-26-BB Additional Information Kedpfx Anezfg Ehodjna Please contact Bob Beukers for further information.

Condition: used, empty load weight: 7,760 kg, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 11/2012, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: silver, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41236 Carnehl Walking Floor Trailer Knsdpfx Anjy R Nazodoa * Year of manufacture: 2012 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Partition wall * 2 x 7-pin electrical connectors * 15-pin electrical connector * Storage/toolbox * Platform * Roll tarp * Suspension: Air * Gross vehicle weight: 36,000 kg * Unladen weight: 7,760 kg * Payload: 28,240 kg * Permissible total weight: 36,000 kg * Tire condition 1st axle: 20% / 20% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 20% / 30% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 30% / 30% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 Disclaimer: Subject to changes, prior sale, and errors excepted. More images and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling all (export) documentation * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV certifications, registration services * Transport of commercial vehicles Contact our trained specialists – we’ll be happy to advise you.

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65R22,5, color: silver, Year of construction: 2026, Fully equipped: - Remote control - Small toolbox on the front panel - Quick-release tarpaulin with separate lashing straps - Smartboard Knsdpfozd U Tqjx Andea - 6 round tail lights - Rotatable crossbar - 1 RVS box = Further information = General information Year of construction: 2026 Axle configuration Tire size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 8,017 kg Payload: 33,983 kg GVW: 42,000 kg Further information Please contact Mark van der Steen for more information.

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65R22,5, color: black, Year of construction: 2026, Complete with: - Remote control Knodpfezd Uk Aex Andja - Small toolbox on the front wall - Quick-release tarpaulin with separate lashing straps - Smartboard - 6x round tail lights - Rotatable crossbar - 2x stainless steel boxes = Further information = General information Year of manufacture: 2026 Axle configuration Tire size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 98% Weights Unladen weight: 8,062 kg Payload: 31,938 kg GVW: 42,000 kg Further information Please contact Mark van der Steen for more information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2018, suspension: air, tire size: 385/65R22.5, color: grey, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Additional Information = Axle configuration Tire size: 385/65R22.5 Axle brand: Valx Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Knedpfx Anjzd Ahvsdsa Weights Unladen weight: 7,990 kg Payload: 34,010 kg GVW: 42,000 kg Additional Information Please contact Bob Beukers for further information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Knodei Riywjpfx Andoa Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires Knsdpfx Aji Riwxendea 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Year of construction: 2014, condition: like new (used), functionality: fully functional, Hilltip floor sweeper (combined with the Hilltip hydraulic power unit): Width: 180 cm Diameter: 50 cm Weight: 180 kg Hilltip hydraulic power unit (also in mint condition, unused, fully functional): Model: HPU18 (built in 2013) Motor: 18 HP (13.4 kW) Knjdpfx Anewiww Sjdoa Voltage: 12 VDC Weight: 190 kg

Condition: used, Year of construction: 2024, 12 months warranty, excluding the engine. Kodpfxezgdm Ej Andsna

Condition: like new (used), Year of construction: 2011, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 10000 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 150 - 2650 mm  (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 56000 kgMachine dimensions approximate: 16520 x 8575 x 5290 mm Accessories Guarding: front sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure coolant through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Knjdpfszcz Srjx Andoa

Condition: new, Year of construction: 2025, color: blue, NEW 20FT FLATRACK hardwood floor stake pockets tare weight: 1,600 kg payload: 28,880 kg max. gross weight: 30,480 kg 4x available Knodpfx Aezcfv Iendea = Further Information = General Information Year of manufacture: Dec. 2026 Model year: 2026 Dimensions Dimensions (L x W): 606 x 244 cm Weights tare weight: 1,600 kg payload: 28,879 kg gross vehicle weight: 30,480 kg Condition overall condition: very good technical condition: very good visual condition: very good Further Information For more information, please contact Arne Honingh.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2017, suspension: air, tire size: 385/65R22.5, color: green, Year of construction: 2017, Tyre size: 385/65R22.5 Axle brand: BPW EAC HD Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Knjdoynimuopfx Andsa Unladen weight: 8,270 kg For further information, please contact Mark van der Steen or Bob Beukers.

Condition: new, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5739 Immediately available! Purchase, lease or lease with purchase option available upon agreement! Approx. 91m³ Stas moving floor trailer with 10m floor / radio remote control / front maintenance door / RENTAL / PURCHASE ---- * Manufacturer: Stas * Model: S300ZX Biostar * Year of manufacture: 2026 * Gross vehicle weight: 42,000 kg * Unladen weight (manufacturer specifications): 7,800 kg * Payload: 34,200 kg * Axles: 3x SAF, 1st axle lift axle with starting aid / disc brakes * Tyres: 385/65 R22.5 on steel rims * Suspension: air suspension with ECAS lift/lower function * EBS * Capacity: approx. 91m³ (13.50 m long x 2.47 m wide x 2.82 m high) Knedpfjyz H Spsx Andoa * Colour: Body RAL 9006 / tarpaulin black SIO7999 / galvanized chassis * Twin rear doors with pneumatic locking * Extendable access ladder on right-hand side * Lift axle starting aid activated via truck control button * Smartboard * Telescopic landing legs * PVC toolbox 830x500x470 mm * 2 LED reversing lights, rear left and right * 2 LED reversing lights at rear supports * 1 LED front wall interior light * Ecoled 2 LED taillights * Cargo Floor 10 mm ribbed CF500SL-C -E Control * V2A stainless steel rear panel * Additional plastic guides below floor profiles * Radio remote control * Moving bulkhead wall * Rolling tarpaulin with Panama tension straps, 900 g/m² * Tarpaulin stoppers * Service door at front * 2 x 3 LED in the door crossbeam * Smartboard German trailer! German papers! NEW VEHICLE! Notice regarding possible listing errors: Despite careful preparation of this listing, occasional errors in the text or details cannot be excluded. We do not assume liability for mistakes, changes or interim sales. All information is supplied without guarantee. Please contact us to verify details or for further questions.

Condition: new, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,610 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, New vehicle – available for purchase, rental, or lease with a purchase option upon agreement! STAS 60 m³ moving floor trailer with Cargo Floor and remote control – Also for rent! ---- * Manufacturer: Stas * Model: Farmstar * First registration: – (new vehicle) * Color: Superstructure RAL 9007 Grey Aluminium, Chassis RAL 9005 Black, Tarp Black * Volume: 60 m³ (approx. 10.61m long x 2.475m wide x 2.30m high) * Gross weight: 39,000kg (technical) / 36,000kg (permitted) * Unladen weight (vehicle registration): 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle lift axle / starting aid / disc brakes * Tyres: 385/65R 22.5 NEW on Speedline Diamond aluminium rims * Suspension: Pneumatic suspension with raise/lower function * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-board floor system with additional plastic inserts beneath the floor profiles * Stainless steel end caps for flooring * 6 mm ribbed floor * Moving bulkhead with stainless steel handles * Control box rear left * Operator platform with access ladders front right and left * Hydraulic connections at the front with 3m hoses (also with possible connection to the landing legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2 locking rods and 1 pneumatic lock * Side walls smooth finish inside and outside (grain spec), fully welded * Roll tarp (680g/m²) with central locking * 3 cross beams * Individual mudguards * Full load supports * Tool box rear right * Shovel and broom holder left * Smartboard * TPMS tire pressure monitoring system * Aluminium ladder right * Extendable ladder rear right * Aluminium impact buffers rear * One-piece foldable aluminium sheet for rear light protection * 2x LED work lights (left + right) * 2x LED reversing lights rear Kedpfjyz H S Aox Andjna * 2 x 3 LEDs in the door closing crossbeam New vehicle – immediately available! Available for rent, purchase, or lease with a purchase option upon agreement! Notice regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional mistakes may occur in the text or information provided. We assume no liability for errors, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg Knsdpfxeyawkxo Andoa * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Equipment: ABS, Stock no. 5640 Purchase, lease, or lease with a purchase option by arrangement! Approximately 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR - Agricultural Moving Floor * First Registration: - (New vehicle) * Colour: Chassis RAL 9005, Superstructure RAL 7001, Tarp SIO 7500 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift and traction assistance / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25m * Suspension: Air suspension with raise/lower functionality * Gross Weight: 36,000 kg * Unladen weight (manufacturer): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control panel rear left * 21-plank floor system, 6mm ribbed * Aluminium end caps, welded * Rear closure plate made of aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue emptying wall with brushes and stainless steel handles * Bulkhead made from aluminium plank profiles * Service door in the bulkhead * Smooth side walls inside and outside (grain specification), fully welded * Inspection window in the left rear side wall * Swing doors (50/50 split) * 4x locking rods Kedpfxexl Ntuj Andsna * Swivelling crossbar at door closure * Hydraulic connections at the front with 3m hoses and * Connection option below the superstructure (without hoses) * Pressure 1" female * Return 1" female * Operator platform with access front left and right * Fifth wheel height 1,150mm * Individual mudguards * Full load supports * Rolling tarp (900g/m²) with quick-clamp system * Aluminium roof bows, foldable * Foldable rear aluminium light guard * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel & broom holder left * 1x 2x8-step aluminium access ladder fixed right * 1x extendable ladder at the rear right * Smartboard * TPMS tyre pressure monitoring * LED rear lights – 5-chamber * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light inside the bulkhead * 2 x 3-function lamps at the top of the door crossbar Purchase, lease, or lease with a purchase option by arrangement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, occasional errors may occur in the text or information provided. We assume no liability for mistakes, changes, or prior sale. All information is subject to change and not guaranteed. Please contact us to verify details or if you have any questions.

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Side tarpaulin can be retrofitted at an extra cost! Stas 91 m² sliding floor / 10 mm flat floor / TÜV cargo certificate ----* Manufacturer: Stas * Type: BIOSTAR - Sliding floor * First registration: - (New vehicle) * Color: Chassis galvanized, body RAL 7016 silver-grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Total weight: 36,000 kg * Unladen weight according to vehicle registration: 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1 lifting axle / starting aid / disc brake * Tires: 385/65 R22.5 New on Speedline Diamond aluminum rims * Wheelbase: 7.85m Knjdpfx Ajv Emk Ujndea * Suspension: ECAS air suspension with lifting and lowering * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box at the rear left * 21 floorboards, 10mm flat * 12 pairs of recessed lashing eyes in the floor * End caps made of aluminum, welded * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Double doors (50/50) with pneumatic locking * 2x twist locks for locking * Door closing crossbeam, swiveling * Hydraulic connections at the front with 3 m hoses and * Connection option below the body without hoses * Operating platform with ladder at the front left * Saddle height: 1150mm * Individual mudguards * Full load supports * Aluminum lighting protection at the rear (one-piece, foldable) * Roll tarp (900g/m²) with tension straps * Steel bars, foldable, and tension straps along the sides * 1x toolbox at the rear left * 1x aluminum ladder 3.80m long * Tire pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminum bumper buffer at the rear * 1x extendable ladder at the rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light in the front wall inside * 2 x 3-function lamps at the top in the door crossbar New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, functionality: fully functional, machine/vehicle number: 2185, empty load weight: 6,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2011, next inspection (TÜV): 02/2027, loading space volume: 40 m³, suspension: air, tire size: 385/65/22.5, wheelbase: 1,310 mm, color: silver, trailer brake: trailer braked, Year of construction: 2011, Equipment: ABS, Schmitz aluminum body with steel chassis, 40 m³, lift axle, roll tarp, platform, folding underrun guard, Schmitz axles with disc brakes, Quicksilver plastic wear-resistant floor, rear door in 11/25, grain slide, German-made semi-trailer. Sold only to commercial businesses and with exclusion of any warranty. Knsdpfxjzdb Icj Andja We deliver to any German seaport.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2003, * Lift axle * BPW axles * Conveyor belt * Walking floor * Tarpaulin cover * Dosing roller * Unladen weight: 9,860 kg -----Internal vehicle number: 9815----Subject to errors & prior sale. WhatsApp support available! Knedpevyxzbefx Andsa If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, maximum load weight: 33,880 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 11/2024, loading space length: 13,425 mm, loading space width: 2,502 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Lift axle * Tarp cover * Storage box * Air suspension * Disc brakes * SAF axles * Unladen weight: 8,120 kg ----Internal vehicle number 11142-----Errors & prior sale reserved WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp Knodpfxswy Hd Nj Andea