Used Format Edgebander for sale (3,496)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) Nsdpfx Aovpalasi Tewn ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Nwjdpoq H Spvefx Ai Tsn Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Njdpfx Aei Hn Sroi Tjwn Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Nwodpfsg Tu N Asx Ai Ten Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Nwodpfxehwhfqe Ai Tjn Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, laser power: 12,000 W, warranty duration: 60 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Nwodpfxehwhf Aj Ai Tsn Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, The machine is on stock!!! Max. edge thickness 3 mm Min./Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Feed speed 10 m/min Gluepot heating time approx. 3.5 minutes Power consumption Ø approx. 7.4 kW Electrical connection 400 V/3 phase/50 Hz (Transformed to your voltage) Table height approx. 900 mm Nodpfx Aehymgdei Tewn Machine dimensions (LxWxH) 4300x1300x1400mm Weight approx. 900 kg Exhaust connection Ø 1 x 140 mm protection spraying edge Pneumatic 3-point-adjustment (radius-, champfer-, flatmilling)

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) Nwodpfx Aiott Iudo Tjn EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" Nedpfx Astr Envei Tjwn W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: used, Thermo Fisher Scientific KingFisher FLEX Magnetic Particle Processor 4 units available Manufacturer: Thermo Fisher Scientific Model: KingFisher FLEX Equipment Type: Automated Magnetic Particle Processor / Nucleic Acid Purification System Application: Automated DNA/RNA purification and sample preparation Description: The Thermo Fisher Scientific KingFisher FLEX is an automated magnetic particle processing system designed for high-throughput purification and sample preparation. The KingFisher FLEX uses magnetic bead technology to automate the processing of biological samples, providing consistent and reproducible purification of DNA, RNA, proteins and other biological targets. It is widely used in molecular biology, genomics, biotechnology, pharmaceutical research and clinical laboratory environments. The system is particularly suited to laboratories looking to automate repetitive sample preparation and purification workflows while reducing manual handling and improving throughput. Key Features: Automated magnetic bead-based sample processing Designed for high-throughput laboratory workflows Suitable for DNA and RNA purification Can be used for protein and other biomolecule purification applications Programmable automated processing protocols Nwedpfx Aiez I S D So Tjn Consistent and reproducible sample preparation Suitable for research, biotechnology and pharmaceutical laboratories Multiple plate formats supported depending on configuration User-friendly automated operation Compact laboratory footprint Typical Applications: DNA purification RNA purification Nucleic acid extraction PCR sample preparation Genomics and molecular biology Next-generation sequencing workflows Protein purification Pharmaceutical research Biotechnology research High-throughput sample preparation Removed from pharma plant in Cork, IE. Devices are in very good condition. Sold as seen ----- Keywords: Thermo Fisher, Thermo Scientific, KingFisher FLEX, King Fisher Flex, KingFisher Flex Purification System, magnetic particle processor, magnetic bead processor, DNA extraction, RNA extraction, DNA purification, RNA purification, nucleic acid extraction, sample preparation, automated sample preparation, molecular biology, genomics, biotechnology, pharmaceutical laboratory, laboratory automation, PCR preparation, NGS, next generation sequencing, protein purification, research laboratory equipment, scientific equipment, lab equipment.

Condition: used, Year of construction: 2000, machine/vehicle number: C/62702, functionality: fully functional, operating hours: 1,660 h, workpiece height (max.): 42 mm, edge thickness (max.): 8 mm, height adjustment type: electric, actuation type: electric, total height: 1,550 mm, total length: 5,750 mm, total width: 1,050 mm, overall weight: 2,200 kg, Equipment: CE marking, OTT Pacific is a series of industrial edge banding machines (machines for applying and processing edge strips) from the Austrian manufacturer Paul OTT GmbH. Key features and specifications: Purpose: Precise processing and bonding of ABS, PVC, wood, or veneer edge strips onto wood panels. Compact design: The total length of the machine is approximately 5.5–5.7 meters, allowing it to be installed in smaller workshops. Edge strip thickness: Processes edge strips with a thickness of 0.3 mm to 15 mm (in classic V6 models, up to 6 mm). Workpiece thickness: Panels with a thickness of 8 mm to 42 mm. Feed rate: Between 12 m/min and 18 m/min. Popular models in the series: Nwsdpfx Aozi E Szoi Ton OTT Pacific V6 / V6-F: A classic and widely used model with grooving cutters (the F designation) and processing of edge strip thicknesses up to 6 mm.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 2,133 h, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 100 mm, number of axes: 3, number of slots in tool magazine: 8, total height: 2,350 mm, table width: 4,500 mm, spindle motor power: 12,000 W, product length (max.): 6,000 mm, spindle speed (max.): 24,000 rpm, This 3-axis FORMAT4 PROFIT H22 was manufactured in 2009. It features a robust work table type with a pod and rail vacuum bed, equipped with 6 moveable support rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking to get high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT H22 machine we have for sale. Contact us for further details. - Voltage (V): 400.0 V- Frequency (HZ): 50.0 Hz- Phase (PH): 3.0- Power (KW): 18.0 kW- Duty Cycle: S6-40%- Current (A): 36.0 A- Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups- Tool Changer: Linear rack tool changer mounted under the gantry rail plus additional pick-up/aggregate station Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking Nwodpez Hk I Hsfx Ai Tsn

Condition: new, Year of construction: 2022, machine/vehicle number: 27762, type of input current: three-phase, input voltage: 22,000 V, input frequency: 50 Hz, nominal power (apparent): 250 kVA, secondary voltage: 400 V, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, SEA Trasformatori TTO oil-immersed distribution transformer for outdoor installation. Condition: new and unused warehouse stock. Never commissioned. Year of manufacture: 2022. Serial number: 27762. Country of manufacture: Italy. Nameplate data: - Rated power: 250 kVA - Primary voltage: 22 / 20 kV - HV tapping range: +/- 4 x 2.5% - Secondary voltage: 400 V - Rated secondary current: 360.8 A - Frequency: 50 Hz - Phases: 3 - Cooling: ONAN - Winding material: aluminium - Highest voltage for equipment: 24 kV - Insulation level: LI 125 kV / AC 50 kV - Temperature rise: oil 60 K / windings 65 K Nwsdpfx Aez Nx I Iei Tsn The attached photograph shows the original manufacturer nameplate.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled Njdpfxjzlbpbe Ai Tswn - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication Nwedpfxozlbp Uj Ai Tsn - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Nsdpfx Aieyxndbs Tswn Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device Nsdpfx Aoyqybuei Tewn MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Nsdpfx Aowkf Dvoi Tjwn Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Nwodpfx Ajwkrqpoi Tsn Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Nwjdpozmtkajfx Ai Tjn Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Njdpjzmtldefx Ai Town Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 2,140 mm, total width: 1,040 mm, empty load weight: 509 kg, total length: 1,300 mm, The WKS in maximum format with 250 mm extended depth and "armored pull-outs" for heavy and bulky Nwsdpfsuwlxrjx Ai Ton voluminous stored goods Tool cabinet with 3 vertical pull-outs each 300 mm wide with 1,800 kg load capacity each Fully assembled including 30 WKH 927 bulk goods trays, each with 4 dividers TRB 927/928 Dimensions: 1,040 w x 2,140 h x 1,300 t Empty weight: 509 kg Structure powder-coated in Gentian blue RAL 5010 (body) and gray white RAL 9002 (pull-outs)

Condition: used, functionality: fully functional, Alberti Format 90 CNC machining centre for sale! Technical specification Working area 3000 x 1250 mm Max. panel thickness 50 mm Max. programmable speed axis X 40m/min, axis Y 40 m/min, axis Z 9m/min Spindles motor power n.2-2 HP - 3000 rpm 27 vertical independent spindles on 32 mm centers Possibility to mount 4 router with cono morse Router speed and power outpust 18000 rpm Possibility to mount 1 saw Saw speed and power output 12000 rpm Operating pressure 6 bar Total weight 4450 kg Nwodjx Ey Sdopfx Ai Tjn Dimensions incl. electr. cabinet 5800 x 3450 x 1950 mm

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. Nwodpfx Aeztbutoi Ten The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: used, Year of construction: 2013, Used machine Nwodpfx Aozu T Sgsi Ten Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term