Used Format4 Finish 1302 for sale (3,370)

Condition: used, mileage: 13,487 km, power: 160 kW (217.54 HP), first registration: 08/2010, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: green, gearing type: automatic, total length: 6,390 mm, total width: 2,420 mm, total height: 3,100 mm, loading space length: 2,961 mm, loading space width: 2,385 mm, loading space height: 1,685 mm, Equipment: all wheel drive, Errors and omissions excepted! Internal number: 1111. V224078 ----EQUIPMENT * Paint finish 2 6431 bronze green, matte, CARC/IR paint * Lights HELLA/VIGNA+ * Trailer coupling RINGFEDER * Windshield wipers * SWF cable winch * Heater SOFICA * Rims LEMMERZ * A99 hydraulic cylinder control for long wheelbase * B28 mechanical quick-release device for spring-loaded cylinders * B42 two-line trailer brake system * B56 compressed air filling connection, front * B68 brake connection, front, left * C04 chassis components lowered for superstructures * C34 anti-slip coating on bumper * C67 fuel tank enlarged * C75 protection for cab tilting hinges * C87 exhaust pipe pointing upwards * D65 mounting parts for external superstructures * E11 electrical system 24V, with camouflage lighting system * E22 extendable battery box slide * E33 battery main switch on the battery box * E35 circuit breaker * E40 ABS trailer socket 24V, 7-pole / 5-pin * E41 trailer socket 24V, 12-pole * E43 trailer socket 24V, 7-pole Tjdpfx Ahez Emrxsmsc * E44 socket for external starting * E48 power supply and warning system (cab-platform) * E52 antenna cable, power supply for radio * E55 pre-wiring/antenna for radio * E57 socket front and rear, 2-pole * E58 socket 7-pole, for reversing lights * E59 socket 6-pole, for trickle charging * E69 reading light * E73 gel batteries, 2x 12V / 100 Ah, maintenance-free * F09 cab, large, extended by 120mm / raised by 120mm * F21 round, pivoting roof hatch * F22 base carrier for roof structure * F43 auxiliary heater with engine preheating * F56 integrated air conditioning system * F60 lifting device for cab * F64 tilting hinges for cab * F78 plain parts painted * G50 transmission oil cooler * J28 tachograph, digital, with additional writing function * JY2 deactivation of warning message for missing driver card * JZ1 tachograph manufacturer Siemens VDO * L02 outline lights forward, white * L18 halogen fog lights, suitable for wading * L30 stone guard for headlights * L32 stone guard, metal, for turn signals * L35 headlight beam adjustment * L71 side marker lights with integrated reflectors * M55 fuel preheating, with water separator * M89 intake air preheating for cold start * MQ4 MB 4-cylinder diesel engine OM924LA, 160kW(218hp) * MS5 engine version Euro V * Q11 hook trailer coupling, Ringfeder Ruwg K.D * Q32 end crossmember for increased trailer load * R30 semi-low-bed rims 11-20 SDC * S02 air-sprung suspended driver's seat * S10 air-sprung suspended passenger seat * S19 seat cover, imitation leather * S41 storage compartment behind passenger seat backrest * S51 holder for first aid kit * S56 cab rear wall without window * S59 electric windows, left and right * S77 transport holder for a G36 rifle, right outside * S78 transport holder for a G36 rifle, left outside * S81 mirror holder widened * T08 spare wheel holder * T30 1 spare rim 11x20 SDC * W60 German as language * X39 lubrication chart, German * Y18 fire extinguisher with holder * Y31 tire inflation hose with pressure gauge * Y36 flag holder, left * Y37 holder for stop paddle * Y38 glare protection for glazing * Y46 warning triangle and warning light * Y48 external starting connecting cable 6m * Y67 color control for second paint (paint additive) * Y68 color control paint finish cab in 2K * Y69 paint finish components in 2K (LZ52) * Z01 vehicle with left-hand drive * Z16 special parts suitable for wading * Z39 lashing and loading eyes * Z48 special parts German Armed Forces * Z66 reduction of wading depth f

Condition: used, axle configuration: 3 axles, first registration: 09/2026, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 47 m³, total length: 10,259 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) Todpfx Ajy Dmvaehmec * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Tedpjv Sthgjfx Ahmec Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Code: 0483 Brand: SCM Model: SANDYA UNO CCS Automatic compact 2-belt wide belt sander for furniture, custom-made furnishings, fixtures, doors, panels, composite materials and various Composition: 1° Group: Calibrating roller 2° Group: Combined Rubber Roller / Finishing Pad Automatic table lifting Working width mm 920 Working height mm 3 - 160 Abrasive belt dimensions mm 930 x 1525 Feed belt speed mt/min 4,5/9 Motor power Hp 10 Infeed and outfeed roller conveyors Automatic table positioning Oscillating belts Working pressure Atm 6 Exhaust hood diameter mm 160 Overall dimensions mm 1395 x 1110 x 1600 h Weight kg 1050 Overall dimensions mm 1395 x 1110 x 1600 h Tsdez Er Swjpfx Ahmec Weight kg 1050

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 41 kVA, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 9,271 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – Well-maintained, inspected & ready for immediate use For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained technical condition. The machine has undergone regular servicing and is in outstanding optical and mechanical shape. It is fully functional, thoroughly checked, and immediately ready for operation. The Mazak 530C stands out with its high-quality features, including a 4th axis, allowing complex workpieces to be machined precisely and efficiently, providing enhanced flexibility. Additionally, the automatic door offers increased user comfort, resulting in reduced setup times and increased safety during operation. The integrated coolant system (KSS unit) ensures optimum chip evacuation, which in turn leads to longer tool life and excellent surface finishes. Combined, these features deliver a powerful package focused on productivity, precision, and reliability. With our all-inclusive service package, we can personally handle the complete process upon request—from delivery to commissioning of your new machine. This includes unloading, placement, and precise alignment of the machining center. Thereafter, our experienced service technicians will carry out professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C operates reliably and accurately. We also offer tailored training programs for your staff so you can make optimal use of the machine from day one. Even after installation, we remain your competent point of contact—whether for maintenance, technical questions, or future upgrades. With our all-inclusive package, you have nothing to worry about—we ensure everything runs smoothly so you can focus completely on your production. Additionally, you can acquire extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units to make your production even more efficient and cleaner. Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machinery and other equipment. We place great emphasis on personal support and are happy to assist you any time, even after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time. You are cordially invited to visit us and see for yourself the condition and functionality of the machine. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Tjdpfx Aoy E Hhfjhmec All specifications are subject to change without notice.

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 Tedpfxeyrty Te Ahmec ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Year of construction: 2013, condition: used, Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Tsdpfx Ahjy Spvlomjc Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- Todsyq Sztepfx Ahmoc NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. Option: New Oppold tool set for H500. The customer reused the existing tooling—previously employed on this H500—for their new machine. A brand-new tool set, matching the programming already established on the machine, costs €50,000. -Windows Timber windows IV 68, 78, and 88 (inward-opening), with stepped rebate on sides and top. 20 mm glazing rebate; frame and sash profiles with 20° slope For loose and integral glazing beads Renovation-style timber windows IV 68, 78, and 88 (inward-opening), without rain rail, with stepped rebate on sides, top, and bottom. 20 mm glazing rebate; frame and sash profiles with 15° slope Attached drip rail Timber-aluminum windows (System provider: Gutmann Mira, sloped rebate system) HA IV 68, 78, and 88, inward-opening; 2 sash variants: square and sloped, Stepped rebate at bottom, sides, and top -Entrance doors Timber entrance doors (IV 68, 78, and 88) with single rebate in frame a...

Condition: new, Year of construction: 2026, Brand new, high-precision vertical broaching machine – a machine of exceptionally high quality. CNC-controlled vertical broaching machine with two, three (or four) CNC axes and electronic control of the rotary table with a positioning accuracy of 0.001°. For the efficient production of spline grooves (including tapered and tangential grooves) – keyways, internal and external gears, racks, etc. CNC control with a 10” color display and touch screen – software for roughing, finishing, and fine finishing (to achieve surfaces with the highest possible quality). Stroke range of the broaching tool holder: 10 to 250. Broaching tool holder speeds: 22 to 90 strokes/min, infinitely adjustable. Broaching tool holder swivel range: +/- 20°. Rotary table size: 450 mm. Bore in the rotary table: Ø 135 mm. Maximum table load: 1,250 kg. Todpfxez Dpcqe Ahmsc Table travel distances, longitudinal and transverse: 250 x 225 mm. Drive power, servomotor for the broaching tool holder: 3 kW. Machine dimensions without control console: 1.3 x 1.45 m x approx. H 2.6 m. Machine weight: approx. 1,700 kg. - Automatic, electronically monitored central lubrication system for the guide rails. - Cutting fluid system for cooling and lubricating the broaching tools. Other models available.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet Tedpfx Ajzd Riuehmjc 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, functionality: fully functional, power: 49.28 kW (67.00 HP), first registration: 10/2013, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Tedpozdizvefx Ahmsc Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty. Tedpfjzdkc Ujx Ahmsc

Condition: excellent (used), functionality: fully functional, STROMAB CT800 Beam Cutting Centre Tedpfxeytnftj Ahmjc Beam cutting centre for large cross-sections, making it an optimal solution for woodworking and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cutting. It guarantees maximum processing speed and finished product quality, reducing labour input and maximizing productivity. Specification: Electronic adjustment of blade tilt angle 90 - 45 degrees Maximum cutting width 650 mm Electronic saw height adjustment Automatic material feeding Touchscreen control panel Rotary worktable 0-345 degrees Maximum blade diameter 800 mm

Condition: used, 2 Threading drills Roughing and finishing cutter R 2 1/4 inches Tsdpfjdk Rgrox Ahmec Weight 4 kg

Condition: good (used), Polishing stand Brush width: 50 mm Todpjd Am Dljfx Ahmsc Space required: W 1050 x D 540 x H 560 mm

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Equipment: 3rd hydraulic function, Complete line for the production of stator and rotor packages, and an assembly line for assembling finished electric motors. The stator line consists of a manual workstation for producing packages, inserting slot insulation, inserting wedges, wire winding on a winding machine, a control machine, and a dielectric strength testing machine. The rotor line consists of a manual workstation for making rotor packages, a machine for applying insulating plastic, a machine for manual collector installation, a winding machine for wire winding, a manual workstation for rotor inspection, and a machine for rotor varnishing. Also included is an assembly line for assembling complete electric motors. The lines are sold in working condition and are ready for operation. Tsdpsz Epz Njfx Ahmoc

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Todpfjy Ua Rxox Ahmoc Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: used, mileage: 42,806 km, power: 120 kW (163.15 HP), first registration: 07/2025, fuel type: diesel, overall weight: 3,200 kg, color: black, gearing type: automatic, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263293 Former non-binding recommended retail price from the car manufacturer: 78,498 € 1st owner, accident-free, with complete service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Electric operation for left sliding door * Electric operation for right sliding door * Electric auxiliary heater * Mirror package Vito * Tourer PRO * BlueEFFICIENCY package ASSISTANCE SYSTEMS * Blind spot assistant * Mercedes-Benz emergency call system * Breakdown management * ECO start-stop function * Cruise control * Headlight assistant * ATTENTION ASSIST * HOLD function * Active brake assist * Traffic sign assistant * Active lane keeping assist * Parking package with reversing camera ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC * Comfort chassis AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * 2-way speakers front and rear * Communication module (LTE) for digital services * MBUX multimedia system INTERIOR * Interior trim, high-quality finish * Lumbar support for driver's seat * Seat rail system with quick-release mechanism * Semi-automatic climate control system TEMPMATIC * Warm air duct to the passenger compartment * Climate zone 1 (cold/comfort) * Plastic floor covering TPO in the passenger compartment * Multifunction steering wheel * Semi-automatic climate control, TEMPMATIC in the rear * Seat heating for driver * Seat heating for front passenger * Attachment points in the roof frame * Thorax-pelvis sidebag for front passenger * Thorax-pelvis sidebag for driver * Windowbags for driver and front passenger * Fabric Caluma black * Lockable glove compartment * Seat configuration vis-à-vis, 1st row of rear seats, rails * Comfort roof control unit * Automatically dimming interior mirror * Airbag for front passenger * Grab handle in the rear * Interior light(s) in the rear * Comfort driver's seat * Front passenger seat, two-seater * Steering wheel adjustable in height and inclination * Armrests for seating in the passenger compartment LIGHTS & VISIBILITY * Ambient lighting, tailgate * Window front left, fixed in side wall/sliding door * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Childproof locks on doors in the passenger compartment * Comfort closing function * Seatbelt warning for front passenger seat * Multi-button remote control * Seat occupancy detection for driver's seat * Anti-theft and break-in alarm system EXTERIOR * Roof lining * Heating for windshield washer system * Tailgate * Tinted glass in the rear, black glass * Metallic paint * Active sliding door lock * Sliding door left * Exterior mirrors, electrically foldable * Heat-insulating glass all around * Exterior mirrors, heated and electrically adjustable * Window fixed in the rear OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Grab handle for entry * Model series C447 Vito/V-Class * Combination vehicle * Weight variant 3,200 kg * AGM battery 12 V 92 Ah * Service interval 40,000 km * Electrical wiring for trailer socket * Main fuel tank 70 liters * Generator 14 V / 250 A * Signage / printed materials, German * Basic * Model update * Generator management Tjdpfxezvk Rij Ahmsc * Head unit, Europe/CIS/Mongolia Further features * Model year G4-II * Digital extra: hard disk navigation * AEJ X4/1 * Model year 5 * 3-seater comfort bench EASY-ENTRY in 2nd row in the rear * 3-seater comfort bench EASY-ENTRY in 1st row in the rear * Model generation 2 * Window

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount Tsdpfx Ajd Ih Hqjhmjc -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Year of construction: 2023, condition: new, Oven for powder coating Working dimensions of the chamber: 7000 x 1600 x 2200 (length x width x height) Thermal insulation: 150 mm Top transport: 6 rails 60 x 60 x 4 Two burners for heating oil with a power of 176 kW each by Lamborghini Heat exchanger with thermocirculation placed on the side of the oven chamber Todpfxskuz Sdo Ahmec Independent temperature measurements (in the furnace chamber and in the exchangers) Control (temperature and cycle time)

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : Tedpfsfydzbjx Ahmjc • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: used, Technical details: material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. Tjdpsu Nu I Tsfx Ahmjc - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Tjdpfsz Dtbkex Ahmsc Weight: 615 kg.

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Todpfx Asyxp Nxehmsc Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. Todoz D Tb Repfx Ahmec - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available