Used Gannomat Vario Press / M for sale (77,571)

Condition: good (used), functionality: fully functional, machine/vehicle number: 07690524031, Year of construction: 2009, load capacity: 2,500 kg, fuel type: electric, construction height: 70,000 mm, empty load weight: 550 kg, total length: 1,750 mm, color: red, fuel: electricity, Expresso Maxi-Mover Industrial truck for internal transportation, towing aid for heavy loads Tractive force: 2500 kg Pjdpfx Asrxrhqjbyjgl Year of construction: 2009 Drive type: electric With height-adjustable forks. Dimensions: height: 70 cm, length: 175 cm, width: 60 cm Unladen weight: 550 kg Defects: the plastic cover of the handle is broken (see picture). However, the machine is fully functional. Prepayment Transportation not included

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Pgsdpofz Dvvsfx Abysl The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Pedpofz Ax Sjfx Abyegl

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Pjdoflpmqjpfx Abyjgl ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Pgedpfjfz A D Nex Abysl • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Set of machinery for garment manufacturing in very good condition and with little use. A list of equipment is attached. Interested parties, please send an email for further information. Pgedpsy Ickzofx Abysl

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. Machinery includes Winkworth style mixer, All-Fill pot and bucket filling lines, Pharma Systems capsule and tablet counters, sieves etc. Pedpfew Nivlox Abyogl

Condition: used, TECHNICAL DATA • Length of sheets: 2,400 mm or 4,000 mm • Width of sheets: 150 mm • Material thickness: 1.5 mm • Load capacity: 500 kg/m² • Condition: used Available quantity: approx. 3,000 m² PRICES: • per m²: €15.00 net Available ex-stock Nordhorn. Pjdpevdqi Ssfx Abyogl Optional accessories • Guardrail • Staircase • Transfer station • Collision protection YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transportation and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. Additional costs depend on the place of delivery and the size of the consignment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the case of an order. The price is quoted per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and the skilled trades. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany Psdpfx Abjy U Hmgsysgl 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Notching saw for cut-outs and bevel notching. The machine is equipped with two saw blades, each with a diameter of 500 mm. It features a pneumatic clamping device. The feed is hydropneumatic and is triggered via two-hand control. The material stop is swiveling, with locking points and a digital display. Notching height and angle are motorized and digitally indicated. Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Pgedpsyzcpdefx Abyjl

Condition: used, Copeland piston compressors of the D6 and D8 series available from stock. Psdpfx Aey Iybqebysgl D6DJ3-4000-AWM/D | Productivity: 126.9 m³/h | Qty: 8 pcs. D8SH1-5000-BWM/D | Productivity: 151 m³/h | Qty: 4 pcs. D8SJ1-600X-BWM/D | Productivity: 180 m³/h | Qty: 4 pcs. D8SK1-700X-BWM/D | Productivity: 210 m³/h | Qty: 2 pcs. D6CM1-700X-FWM | Productivity: 219 m³/h | Qty: 8 pcs. D6CN1-800X-FWM | Productivity: 250 m³/h | Qty: 8 pcs. For pricing and technical details, please get in touch.

Year of construction: 2020, condition: ready for operation (used), A motorized transport trolley with a cover is available. Load capacity: 300kg, max. speed: 6km/h, steering roller diameter: 260mm, drive wheel diameter: 350mm, loading surface dimensions X/Y: 1250mm/600mm, machine dimensions X/Y/Z: approx. 1650mm/600mm/1750mm, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Pgodpfx Aey E S Hgebysl

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW Pgedpjflt Egefx Abyjl - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) Pjdeflt Edjpfx Abyjgl - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Pgjdsflt Ebepfx Abyjl Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Pgodpfx Abspbvqvjysl Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: new, Year of construction: 2025, You need a mobile and powerful compressed air supply for construction sites, sand and dry ice blasting or earth rockets? We offer high quality and robust models from the manufacturer Hertz Kompressoren from Bamberg. Many models are available from stock at short notice or already pre-ordered for shortened delivery times. We look forward to your inquiry and are happy to advise you. You are welcome to inspect and test the machine at our premises. Technical data: Model: Hertz/MAC3 MSP3000 Delivery rate(7bar/10bar): 2.9m³/min and 2.1m³/min respectively. Drive motor: KUBOTA-Stage V D1105 Rated power: 18,1kW Further information and data sheets available on request. Equipment: - Includes integrated compressed air aftercooler - Mounted on chassis up to 750KG - Unit can be supplied in 7 or 10 bar version. Podpfx Asncc Snsbyjgl Additional accessories such as compressed air hose according to DIN20018 and couplings available. If you have any questions, please do not hesitate to contact us. Do not hesitate to call us. We will gladly take over the commissioning, maintenance and approval of the machine for you. Errors and prior sale excepted. All prices plus VAT. Delivery condition: ex works, packed. Best regards RAW INDUSTRIAL TECHNOLOGY Your specialist company for compressed air and automation.

Condition: new, functionality: fully functional, Year of construction: 2026, Do you need a mobile and powerful compressed air supply for fiber optic installation, construction sites, sandblasting, dry ice blasting, or earth rockets? We offer high-quality and robust mobile models from the manufacturer Hertz Kompressoren, based in Bamberg. Many models are available for immediate delivery from stock or are pre-ordered for shorter lead times. Technical data: Model: Hertz MSP 1300 mobile screw compressor Free air delivery: 1.30 m³/min at max. working pressure of 7 bar (Free air delivery: 1.0 m³/min at max. working pressure of 15 bar version) Drive engine: Briggs & Stratton Vanguard 23 HP Rated engine output: 13 kW Handling: Fitted with rollers for manual movement Sound level: 97 dBA Dimensions (WxDxH): 1200 x 790 x 790 mm Weight: approx. 175 kg Equipment: - Optional compressed air aftercooler available Additional accessories such as compressed air hoses according to DIN 20018 and couplings are available. If you have any questions, please do not hesitate to contact us. Feel free to call us. We are also happy to handle commissioning, maintenance, and machine approval for you. Errors and prior sale excepted. All prices plus VAT. Pgedpfx Abjib Du Ueyel Delivery condition: ex works, packed. Best regards, ROHE INDUSTRIETECHNIK Your specialist company for compressed air and automation.

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display Pgjdpfxoyz T A Uj Abyel

Year of construction: 2015, condition: used, For Sale: Variovac Primus – Year of Manufacture 2015 more photo's will follow soon, currently being serviced. We offer a well-maintained Variovac Primus thermoforming packaging machine, manufactured in 2015, designed for reliable and efficient food packaging applications. This machine is widely used in the food industry for vacuum and MAP packaging of fresh and processed products. Key Features - Thermoforming packaging machine - Suitable for vacuum and Modified Atmosphere Packaging (MAP) - Robust industrial design for continuous production - Hygienic construction, ideal for food processing environments - User-friendly control system - Proven Variovac quality and reliability Podjyan D Nepfx Abysgl Applications - Meat and poultry - Cheese and dairy products - Fish and seafood - Ready meals and convenience foods - Other food and non-food products requiring high-quality packaging Condition - Year: 2015 - Good working condition - Professionally maintained - Available for inspection by appointment Advantages - High packaging quality with consistent results - Durable German engineering - Suitable for medium to high production volumes - Easy integration into existing production lines 📍 Location: Available from stock 🚚 Worldwide transport possible upon request For more information, specifications, pricing, or to arrange a viewing, please contact us. * Year: 2015

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. Pgodpfx Abeyyxxfoyel • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Pgsdpfx Aoyyz Txjbysl Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Podpfjyyz Ebex Abysgl Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts Pjdpfxoyyzxho Abyogl - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Pgodpfx Ajywtqdjbyjl Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication