Used Graphic Whizard Gw 6000 for sale (3,419)

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder Fodpfxepyg Tbs Ad Nsgb  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Condition: new, Roller conveyor length 6000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 160 kg length in width 620 mm length in total 6000 mm Fsdpfx Adof Nb Eis Negb Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, measuring length bis 5700 mm Tube length 6000 mm numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths Fsdpfx Adefv Atlo Negb from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Fedpfx Adeifpg As Nsgb Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin nonstop unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Fedoylypujpfx Ad Nogb Rewinder system installed. Electrical Data Nominal current: 500 A Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. The press is available for inspection by appointment.

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) Fgsdpeylynwofx Ad Nsb • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: new, FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Fedswf I Tiepfx Ad Nogb Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Fjdox H U Rwspfx Ad Nsgb Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, FAS roller conveyors 3000-710-650 RA2403 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Fgsdpfxjwf Nfys Ad Njb Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2016, Professional fully automatic packaging system from a renowned European manufacturer, consisting of three components: infeed belt, fully automatic L-sealer, and shrink tunnel. The machines can be operated together as a system or individually. Suitable, for example, for packaging food products, technical goods, printed and paper products, household items and toys, as well as textiles. Infeed Belt GH 1000 / 400: - Infinitely variable speed adjustment - Automatic/manual operation selectable - Length approx. 1 m - Usable width approx. 400 mm - Adjustable side guides - Height adjustable via machine feet Fully automatic L-sealer FP 6000 CS - The L-sealer is equipped with multiple monitoring sensors, light barriers or photocells for controlling the automatic process as well as mechanically adjustable product guides. User-friendly control panel with a wide range of functions and settings, including automatic and setup operation, memory slots for different packaging formats, piece counter, packaging output calculation, multipack functions, communication functions, password levels and energy-saving features. - Motorized adjustment of the sealing frame and forming angle - Packaging capacity: Up to approx. 50 packs/minute - Maximum product length approx. 600 mm (sealing bar length of the L-sealer approx. 650 mm) - Maximum product width approx. 400 mm (crossbar length of the L-sealer approx. 500 mm) - Maximum product height approx. 200 mm (opening of the L-sealer approx. 300 mm) - Maximum film roll length approx. 600 mm. The film can be perforated using four adjustable needle rings. - Height adjustable via machine feet Shrink Tunnel Smipack T 450: - Up to 10 programs can be stored - Tunnel opening approx. 450 x 250 mm - Temperature adjustable from 85 to 200 °C - Conveyor speed adjustable from 2.8 to 9.4 m / min - The hot air flows can be adjusted via several baffle plates at the tunnel entry and exit - The machine can be moved or fixed in place using lockable castors - Adjustable outfeed roller conveyor with protective cover (removable), approx. 1 m long and 400 mm wide Fgedoylwpxjpfx Ad Nob Comprehensive documentation such as operating manuals, wiring diagrams, and spare parts lists available. Only approximately 3,800 packs have been produced with this line, so it is in an almost unused condition.

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station Fsdpfx Aeylk U Ied Negb - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet Fgjdpfx Adjylk D Ns Nob - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: M319, Used SIG filling monoblock 6000 BPH - year 2012Technical Specifications & Performance DataThis automatic filling and capping monoblock is engineered for reliable, mid-range output in beverage production and industrial packaging environments for fresh milk. Manufactured by SIG in 2012, it combines filling and capping on a single compact frame to reduce footprint and streamline changeovers. Designed for second hand installations and upgrades of a used bottling line, it offers dependable performance with standardized utilities and CE conformity.Manufacturer: SIGModel: GTN-00Year: 2012Production speed: 6000 bphBottle formats: Compatible with 0.5L to 1.0L bottlesContainers: Designed for PET and Glass bottle handlingOperating hours: 10000+Electrical supply: 380 V, 3-phase, 50 HzFull load current: 120 ALargest motor load current: 5.4 AShort-circuit interrupting capacity: 5000 AConstruction: CE-marked packaging machineryAdvanced Automation & Control SystemsThe monoblock is configured for automated operation with centralized machine controls, ensuring stable production at 6000 bottles per hour. Electrical architecture is standardized for 380 V, 50 Hz, three-phase networks, supporting safe integration into existing bottling equipment. CE conformity underpins safety circuits and compliant machine wiring, while the integrated design simplifies synchronization between the filler and capper to minimize downtimes during format changes.Production Line Integration CapabilitiesThis unit is well-suited for integration within a used bottling line or as a standalone monoblock in beverage production. Its adjustable working range supports bottle formats from 0.5L to 1.0L, with compatibility for PET and glass bottles, making it adaptable for diverse industrial packaging requirements. Conveyors and upstream/downstream modules can be synchronized to line speed, supporting efficient infeed and discharge configurations.Machine Condition & Maintenance HistoryThe machine is second hand with 10000+ operating hours and configured for ready-for-operation deployment, subject to standard installation and commissioning procedures. Its CE-marked construction and preserved utility specifications indicate a well-documented industrial asset suitable for continued service within beverage production environments.Operational Performance & VersatilityCombining filling and capping on one frame, the monoblock eliminates inter-machine transfer points and reduces footprint. The 6000 bph throughput is ideal for medium-scale operations, contract packaging, and line expansions. Flexibility across PET and glass bottles within 0.5L to 1.0L allows rapid response to product mix changes in bottling equipment portfolios. The integrated capping system ensures precise torque application aligned to the selected closure format when appropriately tooled.Installation Requirements & Site PreparationThe machine requires a 380 V, 50 Hz, three-phase electrical supply... Fjdpfjymdqfsx Ad Nsgb

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DIP-TECH AR 6000 (2013) + Integrated Drying Module Technical specifications: • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible Fjdpfx Adjymb Tqo Njgb • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Inspection possible under power.

Condition: good (used), machine/vehicle number: 48653545275734, Year of construction: 2018, operating hours: 1,466 h, load capacity: 1,600 kg, lifting height: 6,000 mm, overall weight: 2,000 kg, enginetype: Electric, manufacturer: Toyota Fgedpfx Adow Ry Ihs Nob

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm Fgjdpfx Adjyhrnuj Nob CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - power drive on upper compound slide - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 Fedpfx Aekyt Hljd Nogb - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers Fodpfxjfhk Ins Ad Njgb - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Fsdpfx Aet Uucasd Nogb Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Condition: used, mileage: 31,954 km, power: 213 kW (289.60 HP), first registration: 09/2021, overall weight: 16,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: automatic, emission class: euro6, 07.12.2023 Operating hours: 1,249 Rotating beacons CityFant 6000 SH Double-sided sweepings pickup High pressure 100bar, Hydrostat, roller brush 400mm Disc brush 700mm 7" camera system, semi-hydrostat for double-sided operation, Fsdeq Nxwrepfx Ad Nogb

Condition: ready for operation (used), Year of construction: 2004, A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible. Fjdpfxsw Nyi Ns Ad Nogb

Year of construction: 2002, condition: ready for operation (used), A Jufeba pancake machine is available. Tilting troughs: 10, trough capacity: 48, output: approx. 480pcs/h, grease pan internal dimensions X/Y: 580mm/780mm. Machine dimensions X/Y/Z: approx. 1250mm/850mm/1250mm, weight: approx. 250kg. An on-site inspection is possible. Fgjdpex Ivkhsfx Ad Njb

Condition: ready for operation (used), Year of construction: 2015, An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible. Fedpfx Ajwnr I Njd Nsgb

Condition: ready for operation (used), Year of construction: 2019, Product: round 2kg bucket for mozzarella with handle and snap-on lid, throughput: 1600-1800 buckets/h, bucket dimensions: 175x131mm, connected load: 7kW, compressed air connection: 6bar, length: 2060mm, width: 2060mm, height: 3200mm, weight: approx. 4t. Double-lane, includes cup setter, cup control, free space for the installation of a multi-head weigher, rag dosing, CIP design, inverted lid station, push-on station, lifting/pushing-off, discharge conveyor, process control, central lubrication, drainage channels and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine did not run much. Fedpswbpyvsfx Ad Negb

Year of construction: 2011, condition: ready for operation (used), Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible. Fjdpfx Ajvx Twued Njgb