Used Hans Weber Maschinenfabrik Twin Screw Extruder Weber Ds-85 for sale (16,250)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not yet registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent NMV MB 1.65 drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump positioned below the upper edge of the frame * Transmission lock NMV * Twin-plate clutch * Powertrain for 44-120 tons * Transmission oil cooler * Transfer case VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rearview camera * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Side Guard Assist 2 * Front Guard Assist * ATS warranty according to general terms and conditions, 4 years / 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle: 9.0 tons * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air reservoir, aluminum * Electrical pre-installation in the cab, 24V / 100 A * Suspension: front springs 9.0 tons, 4 leaves * Spring brake on 2nd front axle * Windshield tinted with band filter * Vehicle without rear underrun protection * Speed limiter * Transmission: 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 tons * Interior filter for construction vehicles * Fuel tank: 330 liters, aluminum, on the right side * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake * Auxiliary drive – smooth flange * Auxiliary drive, transmission-independent and clutch-dependent MB 1.65 * Configurable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Rear warning device, acoustic and flashing warning light (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight protection grille * Exterior sun visor * Stabilizer on 2nd rear axle, reinforced * Steel wheels 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights, upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Twin-plate clutch * Additional equipment: Emission standard EURO 6e * ABS can be switched off * Axle configuration: 8x8/4, permanent all-wheel drive * Approach/front mirrors, heated * Trailer coupling: drawbar coupling Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit multimedia * Differential lock, front axle Lsdpszch I Tefx Amterp * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switching for dipped beam headlights (light sensor) * Cab: cab entrance, adjustable * Cab: tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: leaf spring / leaf spring * Suspension: rear springs, 2x15.0 tons * Electric windows * AdBlue tank: 25 liters * Manual lifting roof (steel) * Body/structure: chassis for tipper * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor 2-cylinder * Heated air dryer * Engine 12.8 liters - 375 kW R6 diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Application: local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat utilization * Key w

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Vibratory Plate CF 1 HD-III — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Lsdjy A Hbmepfx Amtjrp - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,300 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Tamping Rammer SRV 300-II — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Lsdpfxjy A E Ufj Amterp - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,190 plus VAT | EXW Einbeck | Delivery upon request

Condition: good (used), We are offering for sale a used compensation plate from the manufacturer Polypal. The scope of delivery includes: 1x compensation plate, used Manufacturer: Polypal Type: SKUP Material color: Sendzimir galvanized Dimensions: approx. 130 x 85 mm Thickness: approx. 1.25 mm Lodpfxeg Siiqo Amterp Weight/piece: 0.119 kg

Condition: good (used), Technical specifications for the balancing plate: Manufacturer: Polypal Included in the scope of delivery: 1x balancing plate, used Overall width: approx. 130 mm Overall depth: approx. 85 mm Material thickness: approx. 1.50 mm Bore hole diameter: approx. 15 mm Number of bore holes: 2 pcs. Ljdpfxsi Hkm Uj Amtjrp Weight: approx. 0.12 kg | per piece

Condition: good (used), Technical data for the pallet racking upright: Racking system: Hovuma Included in delivery: 01x Pallet racking upright, used Material color: cream white Profile dimensions: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Includes cross and diagonal braces, Base plates The uprights are pre-assembled (welded frame) 6,640 mm high Ledpfx Amekwdd Ejterp 870 mm deep

Condition: as good as new (ex-display), The scope of delivery includes: 1x waste container, grade II Manufacturer: Weber Depth, lid closed: 755 mm Depth, lid open: 770 mm Height, lid closed: 1,320 mm Overall width: 1,350 mm Capacity: 360 kg Volume: 770 liters Additional data / information: Material color, container: black Material color, lid: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Ledeku Aw Nspfx Amterp Material: Polyethylene (PE) Tires: 4 tires (2 with brakes) Unladen weight: 68 kg Note: Usable width and usable depth taper towards the bottom. General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), We are offering for sale a used rear wall grille holder. The scope of supply includes: 01x Rear wall grille holder, used Material color: Sendzimir galvanized Lrsdpfxogyfxps Amtep Dimension leg A: approx. 115 x 85 mm Dimension leg B: approx. 50 x 85 mm Distance to rear wall grille: approx. 85 mm Elongated hole dimension: approx. 21 x 10 mm Distance center-to-center of holes: approx. 50 mm Weight/piece: approx. 0.403 kg Shipping costs upon request.

Condition: good (used), Screw bookbinding press 40×30 with base Lrodpfxezdat Ro Amtop The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: used, functionality: fully functional, Polishing wheel Lrsdpfezccxaex Amtep Polishing disc diameter: 300 mm Width: 40 mm

Condition: excellent (used), machine/vehicle number: 61 988, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Lsdpfop H Tkisx Amterp

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 80 °C, KARCHER HDS 850-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 80 Connection power [kW]: 6.5 Detergent tank [l]: 20 Hose length [m]: 10 Lodpfxszc E A Ue Amterp Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in detergent tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Water softener tank RM110 prevents corrosion and scale build-up inside the heating coil and other pipes.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Specifications Manufacturer MAZAK Ljdpfsvk Ewkjx Amtjrp Model SQT 30MS Year 1997 Condition Used Description MAZAK SUPER QUICK TURN 30MS CNC SUB SPINDLE, 'C' AXIS, DRIVEN TOOLING LATHE WITH MAZATROL T PLUS CONTROL Kitagawa B-212 3 Jaw Power Chuck. Maximum Swing Ø560mm. Maximum Swing Over Cross Slide Ø500mm. Maximum Turning Ø413mm. Distance Between Spindles 1,035mm. Main Spindle Bore Ø88mm, Sub Ø61mm. Axis Travel 'X'=244mm, 'Z'=1,035mm, 'B'=1,067mm. Maximum Main & Sub Spindle Speeds 3,000rpm. Maximum Milling Spindle Speed 1,500rpm. 12 Station Turret. TOOLINGS INCLUDED WHICH WERE USED IN THE WORKSHOP AND EQUIPMENT FROM PHOTOS WEIGHT 6700 KG DIMENSIONS: LENGHT 4010 mm WIDE 2100 mm HEIGHT 2160 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 ONLY 7 YEARS IN USE . MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO Lrjdpfx Amjvkkhbetep LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, WE OFFER AN VERY NICE MACHINE, COMING FROM SWITZERLAND FROM THE FIRST OWNER. Manufacturer STAMA-GERMANY Model MC331 S -5 AXIS Year 2005 Condition Used Description WE OFFER AN VERY NICE CONDITION STAMA 5 AXIS MC331 5XIS MACHINE GOT AN NEW SPINDLE IN 2019 ITS READY FO OPERATION Ex. Medical Implant Factory was used for service own production High precision (3 Months Measuring protocol) 5 Axis simultaneous High pressure coolant IKZ 20 Bar Clamping system included Brand STAMA Type: MC331 S Year of build: 2005 Travel x-axis: 700mm Travel y-axis: 400mm Travel z-axis: 360mm Speed till n= 1000rpm Ljdevkyp Iepfx Amtsrp Chip conveyor: Yes Coolant pump: Yes -NUMBER OF axis 5 Engine power (kW): 21.00kW Electric connection: 400V Total dimension H: 2700mm Total dimension W: 2480mm Total dimension L: 4500mm Machine weight: 7800kg Range A - axis 360000° Range B - axis 360000° Power supply X-axis 10000 mm/min. Feed Y-axis 10000 mm/min. Power supply Z-axis 10000 mm/min. 2x 30 pieces tool

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Description WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT Description For sale: Well-maintained EMCO Hyperturn 665 MC Plus IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Ledevk E Atjpfx Amterp Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request! TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Controlled in 8 axis - x1-x2-z1-z2-c1-c2-y-b axes Accessories: BAR FEDER AND HUGE LIST OF TOLLINGS ON PHOTOS Length: 3400 mm + convoyer , Height: 2300 mm, Width: 2550 mm, Weight: 7600 kg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, total width: 2,000 mm, total height: 2,020 mm, total length: 3,800 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,400 kg, working height: 900 mm, height adjustment type: electric, input voltage: 400 V, warranty duration: 3 months, passage width: 1,350 mm, sheet thickness (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness brass (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness steel (max.): 100 mm, Equipment: 1 contact roller unit, Ø 210 mm, rubberized 40 Shore, grooved Drive: 15 kW/87 Hz/29 A (11/19 kW motor) with frequency control / ECO-Drive, constant speed, with electric roller adjustment (SKF) and positioning prepared for the use of Scotch-Brite strips 1 sanding brush station with 3 vertical rotating units equipped with 2 horizontal rotating brushes each Tool: grit 150, No. 068087 Lrsdezav Dqepfx Amtep Drive: 2.6 kW per unit Speed of the rotating units: 30-150 rpm, frequency-controlled. Cutting speed of the brushes: 5-20 m/sec, frequency-controlled. With electric height adjustment and positioning Installed options: Automatic workpiece thickness adjustment (AWDM), automatic tool length correction, machine interior lighting (LED version), stepless feed rate 0.5-10 m/min, conveyor belt cleaning brush, conveyor belt control, conveyor table in vacuum version, vacuum control with vacuum sensor Touch screen: 9" Siemens TP900 Comfort Year of manufacture: 2017 Weight [kg]: 3400 kg Previous owner: 1 Availability: Short-term, by arrangement Optionally, the matching piping and extraction system (total CE) are available for the machine.

Condition: used, mileage: 407,000 km, power: 302 kW (410.61 HP), first registration: 07/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, Year of construction: 2009, Equipment: ABS, crane, DAF CF 85.410 / 8x2 Vacuum and rinsing trolleys / 4x2 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 407 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? POWER STEERING ? Immobiliser ? TACHOGRAPH CAPACITY: - TOTAL WEIGHT: 32 000kg WHEELBASE: 205/297/142 cm TIRE SIZE: VORN : 385/65R22,5 HINTEM : 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR Lsdpfx Amoxrx A Eeterp TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 49611

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Lrodpfx Amjyxy S Rotep Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Lredpfx Amefp A I Estep Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Lsdpfx Aovvcqxemtorp Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Lredpfx Aeu Nfmyemtep Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm Lsdpfxsu Nc Rie Amtorp z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Year of construction: 2024, condition: new, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250Kg) / KD63 motor / DRF200 friction drive Replacement fan cover / fan cover - not an original part! OEM part number 12481133 Larger quantities are also available - please inquire. Lredpeq U Iitsfx Amtsp NEW, unused Item location is 75053 Gondelsheim See pictures

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine. Machine frame and feed • Heavy-duty welded steel construction for 3 sanding units • Constant feed height: 900 mm • Control panel and sanding belt change on the left (in feed direction) • Continuously variable feed speed: 3–18 m/min, frequency-controlled • Vacuum conveyor belt version with 5.5 kW vacuum blower and vacuum channel to the top edge of the machineUnit 1: Cross-belt unit • Pressure lamella belt with felt and graphite • ISD link pressure bar system with 11 mm workpiece detection and 44 mm pressure bar width • Workpiece-controlled sanding belt blow-off deviceUnit 2: CBF combination unit • Grooved rubber contact roller Ø 130 mm, 60 Shore • Cross-feed lamella belt with separate 4.0 kW drive • ISA link pressure beam system with 11 mm workpiece detection and 22 mm pressure width (counter-rotating) • Workpiece-controlled oscillating sanding belt blow-off deviceUnit 3: Cross-belt unit • ISD link pressure beam system with 11 mm workpiece detection and 44 mm pressure beam width • Workpiece-controlled sanding belt blow-off deviceControls and functions • Siemens MP 377 12" Multi-Panel HMI: 12" color display, program memory for 300 programs, all parameters set via program • WEBER i-Touch control with rotary knob navigation • WEBER AWDM: automatic thickness adjustment at machine inlet with start switch • Over-thickness safety roller at inlet: automatic lifting of contact roller and segmented pressure beams; feed shutdown • ISA/ISD control: high-resolution workpiece detection in 22 mm increments; free loading of complex shapes; multiple loading with minimal spacing; adjustable grinding intensity and pressure via program • ISA linkage pressure beam system (Unit 2): pressure piece movable longitudinally and transversely • ISD segmented pressure beam system (Units 1 and 3): separate adjustable edge pressure (outer edge only or outer and inner edges); selectable for longitudinal and transverse edges or longitudinal onlyTechnical data • Working width: 1350 mm Lrsdpfx Amjy Twwyetop • Drive unit 1 (Eco-Drive, frequency-controlled): 15.0 kW • Drive unit 2 (Eco-Drive, frequency-controlled): 20.0 kW • Drive unit 3 (Eco-Drive, frequency-controlled): 15.0 kW • CBF drive: 3.0 kW • Vacuum blower drive: 5.5 kW • Anti-rebound feed (frequency-controlled): 3.0 kW • Height adjustment drive (frequency-controlled): 0.75 kW • Sanding belt speed (frequency-controlled): approx. 3–20 m/s • Sanding belt size (cross belts): 2 × 150 × 5100 mm • Sanding belt size (wide belt): 1370 × 2620 mm • Workpiece thickness (min/max): 4–140 mm • Working height (constant): 900 mm • Stepless feed speed: 3–18 m/min Additional equipment • Workpiece ejection device with WEBER ES system (workpiece-controlled; energy-saving; individual slide control) • WANDRES micro-cleaning, single-brush version (power sword brush with integrated micro-moistening for optimal paint dust removal)